stratasys_10k.htm


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
 
(Mark One)  
[√]       ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
    For the fiscal year ended December 31, 2010
    OR
[   ]   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
    For the transition period from ______ to ______

Commission file number 1-13400
 
STRATASYS, INC.
(Exact name of registrant as specified in its charter)
 
Delaware 36-3658792
State or other jurisdiction of (I.R.S. Employer
incorporation or organization Identification No.)
   
7665 Commerce Way, Eden Prairie, Minnesota 55344
(Address of Principal Executive Offices) (Zip Code)
   
Registrant’s telephone number, including area code (952) 937-3000
   
Securities registered pursuant to Section 12(b) of the Act:  
Title of each class Name of each exchange on which registered
Common stock, $.01 par value NASDAQ Global Select Market
   
Securities registered pursuant section 12(g) of the Act:
None
 
     Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes [   ] No [√]
 
     Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes [   ] No [√]
 
     Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for past 90 days. Yes [√] No [   ]
 
     Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period than the registrant was required to submit and post such files). Yes [  ] No [   ]
 
     Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [   ]
 
     Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer [   ] Accelerated filer [√]
Non-accelerated filer [   ] Smaller reporting company [   ]
     (Do not check if a smaller reporting company)
 
     Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [   ] No [√]
 
     The aggregate market value of the registrant’s Common Stock held by non-affiliates of the registrant as of June 30, 2010, the last business day of the registrant’s most recently completed second quarter, was approximately $475,000,000. On such date, the closing price of the Registrant’s Common Stock, as quoted on the Nasdaq Global Select Market was $24.56.
 
     The registrant had 21,087,294 shares of common stock outstanding as of March 1, 2011.
 

 

DOCUMENTS INCORPORATED BY REFERENCE
 
     Portions of the registrant’s Definitive Proxy Statement to be filed with the Securities and Exchange Commission with respect to the registrant’s Annual Meeting of Stockholders scheduled to be held on April 28, 2011 are incorporated by reference into Part III of this Annual Report.
 

 

TABLE OF CONTENTS
 
      Page
Part I          
       
Item 1.   Business 1
       
Item 1A.   Risk Factors 14
       
Item 1B.   Unresolved Staff Comments 20
       
Item 2.   Properties 20
       
Item 3.   Legal Proceedings 21
       
Item 4.   Reserved 21
       
Part II      
       
Item 5.   Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 22
       
Item 6.   Selected Financial Data 24
       
Item 7.   Management’s Discussion and Analysis of Financial Condition and Results of Operation 25
       
Item 7A.   Quantitative and Qualitative Disclosures About Market Risk 40
       
Item 8.   Financial Statements and Supplementary Data 41
       
Item 9.   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 41
       
Item 9A.   Controls and Procedures 41
       
Item 9B.   Other Information 41
       
Part III      
       
Item 10.   Directors, Executive Officers and Corporate Governance 42
       
Item 11.   Executive Compensation 42
       
Item 12.   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 42
       
Item 13.   Certain Relationships and Related Transactions, and Director Independence 42
       
Item 14.   Principal Accountant Fees and Services 42
       
Part IV      
       
Item 15.   Exhibits and Financial Statement Schedules 43
       
Signatures  


 

PART I
 
Item 1. Business.
 
General Development of Business
 
     Stratasys, Inc. is a worldwide leading manufacturer of three-dimensional (“3D”) printers and high-performance rapid prototyping (“RP”) systems for the office-based RP and direct digital manufacturing (“DDM”) markets. Our 3D printers and high-performance RP systems provide 3D computer-aided design (“CAD”) users a fast, office-friendly, and low-cost alternative for building functional 3D parts. We develop, manufacture and sell a broad product line of 3D printers and high-performance RP systems (and related proprietary consumable materials) that create physical parts from CAD designs. We also offer rapid prototyping and production part manufacturing services through our centers located in North America, Europe and Australia. We hold more than 245 granted or pending additive fabrication patents globally. Stratasys’ products are used in the aerospace, defense, automotive, medical, business and industrial equipment, education, architecture, and consumer-products markets.
 
     We were incorporated in Delaware in 1989 and our executive offices are located in Eden Prairie, Minnesota. Our systems are based on our core patented fused deposition modeling (“FDM®”) technology and on our patented Genisys® technology, which we purchased from IBM in 1994. We sold our first commercial product in April 1992 and in February 2002, we introduced the first 3D printer in our Dimension® product line. The Dimension line offers modeling capabilities in durable ABS plastic using a desktop 3D printer platform. In May 2007, we began offering high-performance systems that were specifically designed for DDM, which is the production of end use parts and tools used in fabrication and assembly. Other recent significant developments in our business are set forth below:
Under the OEM Agreement, HP will be selling our 3D printers and related products through its own reseller network. Accordingly, the prices we charge to HP for those products will be less than the prices we presently charge to our own reseller network. As a result, our margins will be smaller on our sales to HP. We intend to compensate for these smaller margins by expanding the market for our 3D printers and thereby substantially increasing the number of 3D printers sold and our overall revenues and profits. However, there can be no assurance that we will be able to increase our revenue sufficiently to maintain or increase our profitability.
1
 

 

Description of Business
 
     We develop, manufacture, market, and service a family of 3D printers and high-performance RP systems that enable engineers and designers to create physical models, parts, tooling and prototypes out of plastic and other materials directly from a CAD workstation. Our high-performance RP systems are used both to create prototype models as well as produce parts for end-user, or DDM, applications. Our 3D printers and high-performance RP systems can be used in office environments without expensive facility modification. In many industries, the models and prototypes required for product development are produced laboriously by hand-sculpting or machining, a traditional process that can take days or weeks. Our computerized modeling systems use our proprietary technology to make models and prototypes as well as end-use parts directly from a designer’s 3D CAD file in a matter of hours. This can eliminate machining and tooling costs and allows for inexpensive design changes. In addition to selling high-performance RP systems and 3D printers, our RedEye paid parts service makes and sells physical models, tooling, prototypes and parts for RP and DDM applications based on our customers’ CAD files.
 
     The 3D printers and high-performance RP systems using our FDM technology to produce prototypes and parts from industrial production-grade plastic do not rely on lasers. This affords our products a number of significant advantages over other commercially available 3D rapid prototyping technologies that rely primarily on lasers to create models. Such benefits include:
2
 

 

     Our systems can also run virtually unattended, producing models while designers perform other tasks.
 
     The process involved in the development of a 3D model using our systems begins with the creation of a 3D geometric design on a CAD workstation. The design is then imported into our proprietary software program, which mathematically slices the CAD design into horizontal layers that are automatically downloaded into the system. A spool of thin thermoplastic modeling material feeds into a moving FDM extrusion head, which heats the material to a semi-liquid state. This semi-liquid material is extruded, deposited and bonded, one ultra-thin layer at a time, on a base (the “X-Y Stage”) in a thermally-controlled modeling chamber. As the material is directed into place by the computer-controlled head, layer upon layer, the material bonds and solidifies, creating a precise and strong model.
 
     Based upon data and estimates furnished in the 2010 Wohlers Report, through 2009 we shipped approximately 36% of all RP systems sold worldwide since 1996. The 2010 Wohlers Report also states that we shipped 32% of all 3D printers sold globally in 2009.
 
Applications for High-Performance Systems and 3D Printers
 
     Both high-performance systems and 3D printers allow for the physical modeling of a design using a special class of machine technology. These systems take data created from CAD files, CT and MRI scan data or 3D digitized data to quickly produce models, using an additive approach. Traditionally, RP and 3D printing have been used by organizations to accelerate product development. Many companies use RP and 3D printing models to test form, fit and function to help improve the time to market.
 
     Frequently, users report rapid pay-back times from using RP and 3D printing, as they accelerate their product development cycle and reduce post-design flaws through more extensive design verification and testing.
 
     DDM involves the use of our systems for the direct manufacture of parts that are subsequently incorporated into the user’s end product or process. DDM is particularly attractive in applications that require short-run or low-volume parts that require rapid turn-around, and for which tooling would not be appropriate due to small volumes. For example, customers produce parts for high-end, specialized vehicles or parts that are subsequently used in the assembly of their unique products. Our Fortus 360mc, 400mc, and 900mc systems are well suited for these types of applications.
 
     An emerging portion of the DDM market segment is the production of manufacturing tools that aid in the customer’s production and assembly process. We believe this fabrication and assembly tool market is substantially larger than the $1.1 billion additive fabrication market that we currently serve. In addition, we have seen a growing number of applications for end-use parts.
 
     During the past five years, the largest growth segment of the additive fabrication market has been 3D printers. 3D printers are low-cost RP systems (typically under $40,000) that reside in the design/engineering office environment, allowing product development organizations quick access to a modeling system.
 
3
 

 

     We have shipped over 15,000 systems since our inception. A wide variety of design and manufacturing organizations use our systems. Current markets and applications include:
 
  • Aerospace
     
  • Automotive
     
  • Consumer Products
  • Architecture
     
  • Business Machines
     
  • Defense

  • Direct digital manufacturing of custom parts
     
  • Electronics
     
  • Heavy Equipment
     
  • Medical Systems
     
  • Tooling
  • Educational Institutions
     
  • Fixtures
     
  • Medical Analysis
     
  • Mold Making

     Additional future applications may include:
 
  • Aerospace and automotive spare parts
     
  • Aerospace ground support equipment
     
  • Free-form graphic design
  • Gaming, art and animation
     
  • Secondary tooling
     
  • Unmanned air and robotic systems

     Among the medical applications, rapid prototyping is being used to produce accurate models of internal organs, bones and skulls for pre-operative evaluations or modeling of prostheses. In such uses, our RP systems serve as a peripheral device for CT and MRI devices.
 
Products
 
     High-Performance Systems and 3D Printers
 
     We have been developing, enhancing and expanding our high-performance systems and 3D printers since our inception in 1989. We have improved both the speed and the accuracy of our high-performance Fortus systems, expanded their build envelopes, introduced a number of new modeling materials and developed and introduced a low-cost 3D printer. We have also enhanced and upgraded the software that our systems use to read CAD files and build parts.
 
     Each of our products is based upon our patented FDM process, and our 3D printers also employ technology acquired from IBM. Our products are sold as integrated systems, consisting of an RP machine, the software to convert the CAD designs into a machine compatible format and modeling and support materials. Each of our products is compatible with an office environment and does not require an operator to be present while it is running.
 
     Our family of 3D printers and high-performance systems affords a customer’s product development team, including engineers, designers and managers, the ability to create prototypes through all stages of the development cycle. Our products meet the needs of a demanding and diverse industrial base by offering a wide range of capability and price from which to choose. The domestic end user list prices of our systems range from $14,900 for the uPrint Personal 3D Printer to $379,900 for our high performance Fortus 900mc.
 
     The Dimension line of 3D printers allows users to create parts in ABSplus plastic. ABS usually offers the part strength required for true form, fit and functional testing. Dimension 3D printers operate in an office environment and provide speed, ease of use and networking capabilities at a competitive price. They feature our Catalyst EX® software, which offers a single push-button operation by automating all of the required build procedures. We introduced the uPrint Personal 3D Printer in January 2009 at a list price of $14,900. In January 2010, we expanded the Dimension uPrint product line by introducing the uPrint Plus. This system offers the same small footprint as the previously introduced uPrint but offers a 33% larger build envelop. It also allows the user to print in seven additional colors and offers two resolution settings. Using Dimension’s proven FDM technology, the uPrint and uPrint Plus build models with Stratasys ABSplus — a material that is on average 40 percent stronger than our standard ABS material, making it ideal for testing the form, fit and function of models and prototypes. The Dimension 1200es SST, introduced in January 2008 and priced at a domestic end user list price of $32,900, offers the ability to build larger parts and creates parts from our ABSplus material as well.
 
4
 

 

     The Fortus 400mc was introduced in July 2007 and allowed for an increase in repeatability, part accuracy and material strength. In addition, in January 2008, we introduced the Fortus 360mc, which offers similar part quality to the Fortus 400mc, but fewer material choices and slower build speeds. Both of these systems can be configured to meet specific customer needs. The InSight software used by our Fortus systems offers the customer an array of features that is more flexible than Catalyst EX, ranging from a fully automated build process to one that allows the user to customize each step. Domestic end user prices for these systems range from $89,900 to $215,000 depending on the configuration and needs of the customer.
 
     In December 2007, we introduced the Fortus 900mc, which represents our largest system ever. It is capable of building parts measuring 4.5 feet diagonally, nine times larger than parts built by the Fortus 400mc. The Fortus 900mc uses ball-screw technology, which improves part accuracy, positional repeatability and tolerances. This product is the direct result of a $3.6 million development contract from a Fortune 500 global manufacturing company entered into in September 2005 to advance our proprietary FDM® technology for direct digital manufacturing applications.
 
     Our 3D printers and high-performance systems incorporate our WaterWorks soluble support system. The patented WaterWorks process allows for the easy removal of supports from a completed prototype by simple immersion into a water-based solution. Because our support materials dissolve in a solution, many post-processing steps required in our competitors’ systems are not required with our systems.
 
     We periodically discontinue manufacturing older products. We discontinued the Prodigy Plus system in 2007, the Vantage and Titan systems during 2008, and the BST 768, SST 768, Fortus 200mc and Maxum systems during 2009. Although we have discontinued the manufacture of these systems, we continue to provide service support in the field.
 
     Part Build Materials
 
     The modeling and support filament used in the RP and DDM systems and 3D printers that we sell are consumable products that generate recurring revenue. We believe that FDM technology allows the use of a greater variety of production grade thermoplastic building materials than other RP technologies. We continue to develop filament modeling materials that meet our customers’ needs for increased speed, strength, accuracy, surface resolution, chemical and heat resistance, color, and mechanical properties. These materials are processed into our patented filament form, which is then fed into the FDM systems. Our spool-based system has proven to be a significant advantage for our products over ultraviolet (“UV”) polymer systems or powder based systems, because our system allows the user to quickly change material by simply mounting the lightweight spool and feeding the desired filament into the FDM devices. The spool-based system also compares favorably with stereo lithography (“SLA”) UV polymer systems, because the spool-based system allows the customer to use it in an office environment and to purchase a single spool, as compared to an entire vat of SLA UV polymer with a limited vat life, thereby reducing the customer’s up-front costs.
 
     Currently, we have nine modeling materials commercially available for use with our FDM technology:
5
 

 

In addition to the modeling materials, support material is used during the build process. Our proprietary water-soluble support material, WaterWorks, is dissolved from the finished part after the build process in our automatic WaveWash system, which was introduced in 2010. We also offer a soluble support material called SR-30, which can dissolve 69% faster than the previous soluble support material. Other proprietary support materials that are removed from the final model by hand are also available.
 
     Each material has specific characteristics that make it appropriate for various applications. The ability to use different materials allows the user to match the material to the end use application, whether it is a pattern for tooling, a concept model, a functional prototype, a DDM manufacturing tool, or a DDM end use part. ABS and ABSplus are offered in numerous colors, including white, black, red, blue, yellow, olive, nectarine and dark grey. We also offer a service to create custom colors for unique customer needs.
 
     Operating Software
 
     Our high-performance systems and 3D printers use one of two software products that convert the three-dimensional CAD databases into the appropriate code to operate our FDM system. The software products also provide a wide range of features, including automatic support generation, part scaling, positioning and nesting, as well as geometric editing capabilities. The software is integrated into the system and is not sold as a stand-alone product.
 
     Catalyst EX, our entry-level software product, enables users to build prototype parts at the push of a button. It was introduced in 2000 and is used on Dimension 1200es SST and BST, Dimension Elite, uPrint, and uPrint Plus. HP’s Designjet printers use a version of Catalyst EX, branded under the HP Designjet 3D Software Solution name.
 
     Our InSight preprocessing software is used on our Fortus products – Fortus 360mc, 400mc, and 900mc. It increases build speed and improves the design engineer’s control and efficiency over the entire build process. It has a broad set of features that facilitate demanding applications ranging from a single “push button” for automatic preprocessing to individual editing and manipulation tools for each process step.
 
     We continuously improve both software products to meet the demands of our sophisticated customers. Our latest software enhancement is Smart Supports, a software feature that reconfigures the way support material is structured in the build process in order to reduce support material usage by as much as 40%. Throughput enhancements, advanced build algorithms and features such as Smart Supports are intended to keep pace with complex industrial geometric designs while saving valuable operator time.
 
Services
 
     Maintenance, Leasing, Training and Contract Engineering
 
     We also provide a number of services in relation to our rapid prototyping business. We provide maintenance to our customers under standard warranty contracts and separate maintenance contracts. In the United States, we lease or rent Fortus 3D Production Systems and Dimension 3D printers to customers that may not be interested in purchasing a printer. We offer training to our customers, particularly on our high-performance systems. We also offer contract engineering services to third parties in connection with the strategic development and use of our systems and services by incorporating our proprietary technology.
 
6
 

 

     RedEye Paid Parts
 
     Our RedEye paid parts service produces prototypes and end-use parts for customers from a customer-provided CAD file. This allows the customer to benefit from our knowledge base, capitalize on the variety of materials and machine types available through our service center, and take advantage of additional capacity using the latest in proven RP and DDM technologies and processes. Our RedEye on Demand website service, www.redeyeondemand.com, enables our customers to obtain quotes and order parts around the clock, seven days a week.
 
     Foreign Service Bureaus
 
     We have a relationship with two foreign service bureaus, RapidPro and the Materialise Group. These service bureaus utilize Stratasys printers, along with other technologies, to produce prototypes. Stratasys collects a portion of the revenue generated by these printers. RapidPro is an Australian-based rapid manufacturing bureau. The Materialise Group is headquartered in Belgium and specializes in the field of rapid industrial and medical prototyping.
 
Marketing, Distribution and Customers
 
     Marketing and Customers
 
     The focus of our marketing begins with the identification of customer needs. We feature a broad array of products that allow us to meet the precise needs of engineers, designers, educators, marketers and manufacturers. Our products range from uPrint, with a domestic end user price of $14,900, to a high productivity Fortus 900mc, priced domestically up to $379,900. We currently offer eight systems, excluding the HP branded printers, between these price points, that meet diverse material, size and performance criteria.
 
We have sold systems to the following representative customers:
 
  • Boeing
     
  • BMW
     
  • Cessna Aircraft
     
  • Dell
     
  • Ford Motor Company
     
  • Graco
     
  • Harley Davidson
     
  • Hewlett Packard
     
  • Honda
  • Hyundai
     
  • Intel
     
  • Lego
     
  • Lever
     
  • Lockheed Martin
     
  • Medtronic-Sofamar Danek
     
  • Mitsubishi Electronics
     
  • NASA
     
  • Nike
  • Pioneer Speaker
     
  • St. Jude Medical
     
  • Toro
     
  • Toyota
     
  • University of Texas
     
  • University of Wisconsin - Madison
     
  • US Army Depots
     
  • US Navy Fleet Readiness Center
     
  • Xerox

     No customer accounted for more than 10% of sales in 2010, 2009, or 2008.
 
We use a variety of tactical marketing methods to reach potential customers:
 
  • Web-based marketing
     
  • Trade magazine articles
     
  • Brochures
     
  • Websites
     
  • Internet blogs
     
  • Press releases
     
  • Industry associations
  • Print advertisements
     
  • Direct mailings
     
  • Trade show demonstrations
     
  • Social media
     
  • Broadcast e-mail
     
  • Webinars
     
  • Internet search engines

7
 

 

     In addition, we have developed domestic and international on-site demonstration capabilities.
 
     Sales Field Structure
 
     Our sales organization uses a reseller network and is divided into two groups based on geographical areas. The Americas sales organization covers North, Central and South America and the International sales organization covers all other areas of the world. This structure allows us to align our sales and marketing resources with our diverse customer base and, specifically in the United States, provides more than three times the sales support for high-end systems compared to a direct sales channel.
 
     Americas Sales Organization
 
     The Americas sales organization provides sales support to a network of more than 100 reseller locations in North, Central and South America. On January 1, 2009, we began selling our Fortus 3D Production Systems through a select group of North American resellers that had previously distributed only the Dimension 3D printer product line. This sales strategy leverages our success with a network of independent regional resellers that we believe is the strongest sales channel in the industry. By replacing our Fortus 3D Production Systems direct sales channel with our existing reseller channel, we have converted a significant portion of our fixed selling costs to a variable cost structure.
 
     International Sales Organization
 
     The International sales organization uses a worldwide network of more than 100 resellers to market, sell, and service our 3D printers and Fortus 3D Production Systems. Our International sales organization supports all major regions of the world outside of the Americas including Europe, the Middle East, Korea, Taiwan, Japan, and China. We also operate international sales and service centers in Frankfurt, Germany; Bologna, Italy; Bangalore, India; Hong Kong; and Shanghai, China.
 
     Reseller Network
 
     We use an extensive world-wide reseller network to market and sell our 3D printers, Fortus 3D Production Systems, and consumable materials, and to provide maintenance service and replacement parts. Most of the reseller outlets have 3D printers available for tradeshows, product demonstrations and other promotional activities. Many of them also enjoy a long-term presence in their respective territories making this distribution model highly effective relative to a direct sales model. In addition to our 3D Printers and 3D production systems, most resellers sell and service a third-party 3D solid CAD software package.
 
     During the first quarter of 2010, we signed a Master OEM Agreement (the “OEM Agreement”) with HP to develop and manufacture an HP-branded 3D printer. During the initial term of the OEM Agreement, which expires on September 30, 2011, we have developed and are manufacturing a line of FDM (“Fused Deposition Modeling”) 3D printers and related accessories and consumables exclusively for HP for resale under the HP brand in France, Germany, Italy, Spain and the United Kingdom. In March of 2010, we delivered our first shipment of 3D printers to HP under this OEM Agreement. In April of 2010, HP launched our support removal system and the WaveWash system in those countries under the HP brand name, HP Designject 3D Removal System.
 
     HP has agreed not to sell any 3D printers manufactured by any other companies, including HP, throughout the world for the term of the OEM Agreement. The term of the OEM Agreement will be extended for additional one-year periods unless the agreement is terminated on advance notice by either party. During the term of the OEM Agreement, we have agreed not to sell comparable products covered by the Agreement directly or indirectly in the territory covered by the OEM Agreement. The OEM Agreement does not require HP to purchase any minimum quantity of products. After the initial term, or by mutual agreement, the territory in which HP will have the exclusive right to sell the 3D printers covered by the OEM Agreement may be expanded to additional countries. Ultimately, our mutual intention is for HP to sell our low-cost 3D printers globally.
 
8
 

 

     RedEye Paid Parts
 
     In 2006, we established a dedicated internal sales channel to offer our RedEye paid parts services through our RedEye on Demand instant Internet quoting system. This team is responsible for growing our paid parts service and nurturing customers who have RP and DDM part needs. Their objective is to insure that the customer has a favorable experience when solving their internal part requirements. Besides a commitment to customer satisfaction, an essential objective of this operation is to increase the number of quality FDM parts in the marketplace, which, in turn, we believe will also support the expansion of our system sales. In 2007, we launched a software that enabled instant part quoting via Redeye RPM, later rebranded as Redeye on Demand, in both Europe and Australia.
 
     In December 2008, we announced that AutoCAD users can order digitally manufactured prototypes and production parts quickly and easily through an on-demand 3D printing capability supported by our RedEye paid parts service. AutoCAD 2009 subscription customers had access to this functionality via a bonus pack. Included in the bonus pack was on-line ordering capability, giving designers and engineers the ability to get instant quotes and place orders from our RedEye paid parts service. AutoCAD 2010 and 2011 subscription customers continue to have access to this functionality.
 
     Customer Support
 
     Our Customer Support department provides on-site system installation and maintenance services and remote technical support to users of our products. We offer services on a time and materials basis as well as through a number of post-warranty maintenance contracts with varying levels of support and pricing. Our domestic customers can use a toll-free telephone number to request technical assistance, schedule service visits, order parts and supplies, or directly contact a manager within the Customer Support department. Our help desk provides technical support via phone, fax, and e-mail to international customers, resellers, and to our field service personnel.
 
     The uPrint maintenance and servicing is performed by a third-party service organization or selected resellers in certain international locations. For our high performance systems, we employ a field service organization that performs system installation, basic operation and maintenance training, and a full range of maintenance and repair services at customer sites. Field representatives have been trained and certified to service all of our products. Representatives are strategically located in regional offices across North America. They have secure remote access to a customer service database containing service history and technical documentation to aid in troubleshooting and repairing systems.
 
     Customer Support is represented on cross-functional product development teams within Stratasys to ensure that products are designed for serviceability and to provide our internal design and engineering departments with feedback on field issues. Failure analysis, corrective action, and continuation engineering efforts are driven by data collected in the field. Ongoing customer support initiatives include development of advanced diagnostic and troubleshooting techniques and comprehensive preventative maintenance programs, an expanded training and certification program for technical personnel, and improved communication between the field and the factory.
 
     Warranty and Service
 
     We offer a one-year warranty on Fortus 3D Production Systems and uPrint systems worldwide. In addition we offer a one-year warranty on all systems sold internationally and systems sold into the education market domestically. All other domestically sold systems have a 90-day warranty. We also offer annual and multiple-year service and maintenance contracts for our systems. Service contracts for our systems have a domestic end user price from approximately $2,000 to $49,000 per year.
 
Manufacturing
 
     Our manufacturing process consists of assembling systems using purchased components from our proprietary designs and producing consumable filament to be used by our systems. We currently operate on a build-to-forecast basis and obtain all parts used in the manufacturing process either from distributors of standard electrical or mechanical parts or from custom fabricators of our proprietary designs. Our suppliers are measured by on-time performance and quality.
 
9
 

 

     We purchase major component parts for our Fortus 3D Production Systems and 3D printing systems from various outside suppliers, subcontractors and other sources and assemble them in our Minnesota facilities. Our production floor has been organized using demand-flow techniques (“DFT”) in order to maximize efficiency and quality. Using DFT, our production lines are balanced, and as capacity constraints arise, we can avoid the requirements of reconfiguring our production floor.
 
     Computer-based Material Requirements Planning (“MRP”) is used for reordering to ensure on-time delivery of forecasted parts. All operators and assemblers are certified and trained on up-to-date assembly and test procedures, including Assembly Requirement Documents, which originate in engineering. The assembly process includes semiautomated functional tests of key subassemblies. Key functional characteristics are verified through these tests and the results are stored in a statistical database. At the completion of assembly, we perform a complete power up and final quality test to ensure the quality of our products before shipment to customers. The complete final quality tests must be run error free before the system can be cleared for shipment. We maintain a history log on all products that shows revision level configuration and a complete history during the manufacturing and test process. All issues on the system during the manufacturing process are logged, tracked and used to make continuous process improvements of our production processes. Other manufacturing strengths that are incorporated into our new designs are the commonality of designs among our different products as well as the incorporation of Six Sigma concepts. Our filament production utilizes Factory Physics® techniques to manage critical buffers of time, capacity and inventory to ensure product availability. We also utilize the “5S” method (Sort, Set-in-order, Shine, Standardize and Sustain) as part of our lean manufacturing initiatives to improve organization and efficiency.
 
     To provide customers with assurance regarding the quality and consistency of our systems, we obtained ISO 9001: 2008 certification in February 2011. ISO 9001: 2008 provides a structure for a quality management system that strives for customer satisfaction, consistent quality, and efficiency. In addition, there are internal benefits such as improved customer satisfaction, interdepartmental communications, work processes, and customer-and-supplier partnerships. The ISO 9000 family of standards relates to quality management systems and is designed to help organizations ensure they meet the needs of customers and other stakeholders.
 
     We maintain an inventory of parts to facilitate the timely assembly of products required by the production plan. While most components are available from multiple suppliers, certain components used in our systems and consumables are only available from single or limited sources. We consider these single-source suppliers to be very reliable, but the loss of one of these suppliers could result in the delay of the manufacture and delivery of those materials and compounds. This type of delay could require us to find and re-qualify the product supplied by one or more new vendors. Although we consider our relationships with our suppliers to be good, we continue to develop risk management plans for these critical suppliers.
 
Research, Development and Engineering
 
     We believe that ongoing research, development and engineering efforts are essential to our continued success. Accordingly, our engineering development efforts will continue to focus on customer requested enhancements, improvements to the FDM technology and development of new modeling processes, materials, software, user applications and products. We have devoted significant time and resources to the development of a universally compatible and user-friendly software system. We are committed to designing products using the principles of Six Sigma. We continue to standardize our product platforms, leveraging each new design so that it will result in multiple product offerings that are developed faster and at reduced expense. The Fortus 360mc, 400mc, 900mc, Dimension, and uPrint products as well as the Catalyst EX and InSight software products are examples of this successful strategic initiative. For the years ended December 31, 2010, 2009 and 2008, our research, development and engineering expenses were approximately $9.8 million, $7.7 million and $9.0 million, respectively.
 
     Our relationship with HP has increased our focus on product reliability. HP requires a superior quality standard and demands extensive testing prior to production to ensure consistency. This focus, combined with HP’s standards, has created a positive effect on the overall quality of our systems.
 
     Our filament development and production operation is located at our facilities in Eden Prairie, MN. We regard the filament formulation and manufacturing process as a trade secret and hold patent claims on filament usage in our products. We purchase and formulate raw materials for our consumable filament production from various polymer resin suppliers with different levels of processing and value add applied to the raw materials.
 
10
 

 

Intellectual Property
 
     We consider our proprietary technology to be material to the development, manufacturing, and sale of our products and services and seek to protect our technology through a combination of patents and confidentiality agreements with our employees and third parties. All patents and patent applications for rapid prototyping processes and apparatuses associated with the Stratasys FDM technology have been assigned to us by their inventors. As part of our purchase of rapid prototyping technology assets from IBM, we were also assigned the rights and title to several patents developed by IBM. We recorded these patents domestically and in certain foreign countries. The United States patents covering our proprietary FDM technology expire at various times between 2011 and 2030. In total, we currently own over 245 FDM U.S. and international patents and patent applications, and we have been assigned rights under an additional 45 UV polymer based U.S. patents.
 
     Our registered trademarks include:
 
  • Stratasys
     
  • Stratasys, Inc.
     
  • Shell Design
     
  • QuickSlice
     
  • Xpress 3D
  • Dimension BST
     
  • uPrint
     
  • Build FDM
     
  • Fortus
     
  • Real & Design
  • Dimension SST
     
  • Catalyst
     
  • Dimension
     
  • Redeye RPM
     
  • Fortus
 
     Other trademarks include:
 
  • FDM Maxum
     
  • BASS
     
  • InSight
     
  • Fortus 200mc
     
  • Prodigy Plus
     
  • WaveWash
  • FDM Titan
     
  • WaterWorks
     
  • Touchworks
     
  • Fortus 360mc
     
  • Prodigy
     
  • Ecoworks
  • SupportWorks
     
  • FDM Quantum
     
  • Fortus 900mc
     
  • Fortus 400mc
     
  • Genisys
     
  • Dimension Elite
 
     Each of the registered trademarks has a duration of 10 years and may be renewed every 10 years while it is in use. Trademark applications have also been filed in Japan, the European Community, China, the Republic of Korea, Canada, and Hong Kong.
 
We have also registered a number of Internet domain names, including the following:
 
  • Stratasys.com
     
  • BuildFDM.com
     
  • 3Dprinter.com
     
  • Paidparts.com
  • Dimensionprinting.com
     
  • 3D-fax.com
     
  • Stratasysdimension.com
     
  • Xpress3D.com
  • RedEyeRPM.com
     
  • DimensionDirect.com
     
  • Fortus.com
     
  • RedEyeonDemand.com
 
Backlog
 
     Our total backlog of system orders at December 31, 2010 was approximately $8.6 million, as compared with approximately $6.3 million at December 31, 2009. We estimate that most of our backlog will ship by the end of first quarter of 2011.
 
11
 

 

Seasonality
 
     Historically, our results of operations have been subject to seasonal factors. Stronger demand for our products has occurred in our fourth quarter primarily due to our customers’ capital expenditure budget cycles and our sales compensation incentive programs. Our first and third quarters have historically been our weakest quarters. Although the first quarter has had higher volumes in recent years from the successful introduction of new products, it is typically a slow quarter for capital expenditures in general. The third quarter is typically when we see our largest volume of educational related sales, which normally qualify for special discounts as part of our long-term market penetration strategy.
 
Competition
 
     We compete in a marketplace that is still primarily using conventional methods of model-making and prototype development. We believe that there is currently no other producer of industrial 3D modeling devices that uses a single-step, non-toxic technology similar to our FDM technology. Most of the 3D printing and other RP systems manufactured by our competitors involve additional post-processing steps, such as curing the part after construction of the model or prototype. In addition, our FDM technology does not rely on the laser or light technology used by other commercial manufacturers in the RP industry.
 
     Our competitors employ a number of different technologies in their RP devices. 3D Systems and CMET use stereo lithography (“SLA”) in their products. 3D Systems and EOS GmbH produce machines that use selective laser sintering (“SLS”) to harden powdered material. Z Corp. uses inkjet technology to bond powdered materials such as starch. Solidscape, 3D Systems and Objet Geometries have developed prototyping systems that use inkjet technology to deposit resin material layer by layer. A smoothing or milling process is often required between each deposited layer to maintain accuracy in these processes, which reduces material yields. Envisiontec utilizes a photopolymer mask and a light process to build models and Solido uses a plastic sheet lamination technique. We believe that our FDM technology has important advantages over our competitors’ products. These advantages include:
     Based on data and estimates presented in the 2010 Wohlers Report, in 2009 we shipped more units globally than any other company in the RP industry, and we were the second largest in terms of revenue. The 2010 Wohlers Report also states that we shipped 32% of all 3D printers shipped globally in 2009. We believe that this trend continued in 2010 as well.
 
Employees
 
     As of March 1, 2011, we had 414 full-time employees and contractors or temporary employees globally. While we have separate internal departments, such as manufacturing, marketing, engineering and sales, many employees perform overlapping functions within the organization. No employee is represented by a union, and we have not experienced any work stoppages. We believe our employee relations are good.
 
12
 

 

Governmental Regulation
 
     We are subject to various local, state and federal laws, regulations and agencies that affect businesses generally. These include:
Environmental Regulation
 
     We offer innovative, high quality products and services that are environmentally friendly. We also offer a green recycling program that ensures a lower impact on the environment by recycling used filament cartridges, canisters and spools.
 
     In the European marketplace, electrical and electronic equipment is required to comply with the Directive on Waste Electrical and Electronic Equipment (“WEEE”) and the Directive on Restriction of Use of Certain Hazardous Substances (“RoHS”). WEEE aims to prevent waste by encouraging reuse and recycling and RoHS restricts the use of six hazardous substances in electrical and electronic products. Our products and certain components of such products “put on the market” in the EU (whether or not manufactured in the EU) are potentially subject to WEEE and RoHS. We monitor the development of such directives and comply with such directives in the required time frames.
 
Available Information
 
     We file annual, quarterly and current reports, proxy statements and other information with the Securities and Exchange Commission. You may read and copy any document we file at the SEC’s public reference room at 100 F Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 for information on the public reference room. The SEC maintains a website that contains annual, quarterly and current reports, proxy statements and other information that issuers (including Stratasys) file electronically with the SEC. The SEC’s website is www.sec.gov.
 
     Our website is www.stratasys.com. We make available free of charge through our Internet site, via a link to the SEC’s website at www.sec.gov, our annual reports on Form 10-K; quarterly reports on Form 10-Q; current reports on Form 8-K; Forms 3, 4 and 5 filed on behalf of our directors and executive officers; and any amendments to those reports filed or furnished pursuant to the Securities Exchange Act of 1934 as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC.
 
     We make available on www.stratasys.com our most recent annual report on Form 10-K, our quarterly reports on Form 10-Q for the current fiscal year and our most recent proxy statement, although in some cases these documents are not available on our site as soon as they are available on the SEC’s site. You will need to have on your computer the Adobe Acrobat Reader software to view these documents, which are in PDF format. If you do not have Adobe Acrobat, a link to Adobe’s Internet site, from which you can download the software, is provided. The information on our website is not incorporated by reference into this report.
 
Financial Information About Operations In the United States and Other Countries
 
     The information required by this item is incorporated by reference to our Financial Statements included elsewhere in this report. (See Part IV, Item 15, Note 19.)
 
13
 

 

Item 1A. Risk Factors.
 
     Many of the factors that affect our business and operations involve risk and uncertainty. The following describes the principal risks affecting us and our business. Additional risks and uncertainties, not presently known to us or currently deemed material, could negatively impact our results of operations or financial condition in the future.
 
We may not be able to introduce new high-performance systems, 3D printing systems and materials acceptable to the market or to improve the technology and software used in our current systems.
 
     Our ability to compete in the high-performance and 3D printing market depends, in large part, on our success in enhancing our existing product lines and in developing new products. Even if we successfully enhance existing systems or create new systems, it is likely that new systems and technologies that we develop will eventually supplant our existing systems or our competitors will create systems that will replace ours. The RP industry is subject to rapid and substantial innovation and technological change. We may be unsuccessful at enhancing existing systems or developing new systems or materials on a timely basis, and any of our products may be rendered obsolete or uneconomical by our or others’ technological advances.
 
If the 3D printing market does not continue to accept our systems, or if our Fortus high-performance systems do not meet the needs for DDM applications, our revenues may stagnate or decline.
 
     We derive a substantial portion of our sales from the sale of 3D printers and Fortus 3D Production Systems. If the market for 3D printers or high-performance systems declines or if competitors introduce products that compete successfully against ours, we may not be able to sustain the sales of those products. If that happens, our revenues may not increase and could decline.
 
If we are unable to maintain revenues and gross margins from sales of our existing products, our profitability will be adversely affected.
 
     Our current strategy is to attempt to manage the prices of our high-performance systems and 3D printers to expand the market and increase sales. In conjunction with that strategy, we are constantly seeking to reduce our direct manufacturing costs as well. Our engineering and selling, general and administrative expenses, however, generally do not vary substantially in relation to our sales. Accordingly, if our strategy is successful and we increase our revenues while maintaining our gross margins, our operating profits generally will increase faster as a percentage of revenues than the percentage increase in revenues. Conversely, if our revenues or gross margins decline, our operating profits generally will decline faster than the decline in revenues or gross margins. Therefore, declines in our revenues may lead to disproportionate reductions in our operating profits.
 
Hewlett-Packard may not expand distribution under our OEM Agreement beyond its initial territory of five European countries, and the OEM Agreement may not continue beyond its initial term ending on September 30, 2011.
 
     Our Agreement with HP has an initial term that ends on September 30, 2011, and has an initial territory of five European countries. There can be no assurance that HP will expand the territory in which they sell our 3D printers and other products. Furthermore, even though the OEM Agreement will automatically be renewed for one-year terms unless either party terminates it on advance written notice, there can be no assurance that the OEM Agreement will continue beyond its initial term or any renewal term. If HP does not expand the territory or the Agreement is terminated, we will not achieve the anticipated benefits of entering into the OEM Agreement, which include substantial additional revenue and profits as well as validation of our products in the market place.
 
Since we will be selling our 3D printers and related products to HP on an OEM basis, our margins on those products will be lower than those on the products that we presently sell, which may reduce our overall profitability.
 
     HP will be selling our 3D printers and related products through its own reseller network. Accordingly, the prices we charge to HP for those products will be less than the prices we presently charge to our own reseller network. As a result, our margins will be lower on our sales to HP. We intend to compensate for these lower margins by expanding the market for our 3D printers, thereby substantially increasing the number of 3D printers sold and our overall revenues and profits. However, there can be no assurance that we will be able to increase our revenue sufficiently to maintain or increase our profitability over time.
 
14
 

 

If our present single or limited source suppliers become unavailable or inadequate, our customer relationships, results of operations and financial condition may be adversely affected.
 
     We maintain an inventory for most of our necessary supplies, which facilitates the assembly of our systems and the manufacture of our consumables. While most components for our systems and materials and compounds for our consumables are available from multiple suppliers, certain of those items are only available from single or limited sources. Should any of our present single or limited source suppliers become unavailable or inadequate, we would be required to spend a significant amount of time and expense to develop alternate sources of supply. It would also require us to re-qualify any product supplied by one or more new vendors. Accordingly, the loss of a supplier with vendor-specific components, materials or compounds could result in a delay in the manufacture and delivery of our systems or consumables. In addition, if we were unable to find a suitable supplier for a particular component, material or compound, we could be required to modify our existing products to accommodate substitute components, material or compounds. As a result, the loss of a single or limited source supplier and resulting delays in delivery could adversely affect our relationship with our customers and our results of operations and financial condition.
 
If other manufacturers were to successfully develop and market consumables for use in our systems, our revenues and profits could be adversely affected.
 
     We presently sell substantially all of the consumables that our customers use in our systems. However, even though we attempt to protect against replication of our consumables through patents and trade secrets and we provide that our warranties are valid only if customers use consumables that we certify, it is possible that other manufacturers could increase their development of consumables that could be used successfully in our systems. If our customers were to purchase consumables from other manufacturers, we would lose some of our sales and could be forced to reduce prices, which would impair our overall revenue and profitability.
 
If we fail to grow our RedEye paid parts service as anticipated, our net sales and profitability will be adversely affected.
 
     We are attempting to grow our RedEye paid parts service substantially. To this end, we have made significant infrastructure, technological and sales and marketing investments. These investments include a dedicated facility, increased staffing, use of a substantial number of our Fortus 3D Production Systems exclusively for Paid Parts, and the development and launch of our RedEye on Demand service, which enables customers to obtain quotes for and order parts over the Internet. If our RedEye paid parts service does not generate the level of sales required to support our investment, our net sales and profitability will be adversely affected. Our competitors’ consolidation efforts in the service bureau industry may also adversely affect RedEye’s efforts to grow.
 
If any of our manufacturing facilities is disrupted, sales of our products will be disrupted, and we could incur unforeseen costs.
 
     We perform the final assembly of our 3D printers and high-performance systems and we manufacture our filament at our facilities in Eden Prairie, Minnesota. If the operations of any of those facilities is disrupted, we would be unable to fulfill customer orders for the period of the disruption. We would not be able to recognize revenue on orders that we could not ship, and we might need to modify our standard sales terms to secure the commitment of new customers during the period of the disruption and perhaps longer. Depending on the cause of the disruption, we could incur significant costs to remedy the disruption and resume product shipments. Such a disruption could have a material adverse effect on our revenue, results of operations and earnings.
 
We own our manufacturing and office facilities, which may limit our ability to move our operations.  If we were to move some of all of our operations, we could incur unforeseen charges.
 
     We own four buildings in Eden Prairie, Minnesota, which we use to conduct most of our manufacturing and assembly operations.  Ownership of these buildings may adversely affect our ability to move some or all of our operations to other locations that may be more favorable.  If we were to move any of our operations to other locations, we may have difficulty selling or leasing the property that we have vacated.  This could result in an impairment charge, which could have a material adverse effect on our results of operations in one or more periods.
 
A loss of a significant number of our resellers or channel managers would impair our ability to sell and service our products and could result in a reduction of sales and net income.
 
     We sell all of our products through resellers. We rely heavily on these resellers to sell our products to end users in their respective geographic regions and rely exclusively on resellers to service our products outside the United States. If a significant number of those resellers were to terminate their relationship with us or otherwise fail or refuse to sell or service our products, we may not be able to find replacements that are as qualified or as successful in selling or servicing our products. If we are unable to find qualified and successful replacements, our sales will suffer, which would have a material adverse affect on our net income.
 
Our failure to expand our intellectual property portfolio could adversely affect the growth of our business and results of operations.
 
     Expansion of our intellectual property portfolio is one of the available methods of growing our revenues and our profits. This involves a complex and costly set of activities with uncertain outcomes. Our ability to obtain patents and other intellectual property can be adversely affected by insufficient inventiveness of our employees, by changes in intellectual property laws, treaties, and regulations, and by judicial and administrative interpretations of those laws treaties and regulations. Our ability to expand our intellectual property portfolio could also be adversely affected by the lack of valuable intellectual property for sale or license at affordable prices. There is no assurance that we will be able to obtain valuable intellectual property in the jurisdictions where we and our competitors operate or that we will be able to use or license that intellectual property.
 
We may not be able to adequately protect or enforce our intellectual property rights, which could impair our competitive position.
 
     Our success and future revenue growth will depend, in part, on our ability to protect our intellectual property. We rely primarily on patents, trademarks and trade secrets, as well as non-disclosure agreements and other methods, to protect our proprietary technologies and processes globally. Despite our efforts to protect our proprietary technologies and processes, it is possible that competitors or other unauthorized third parties may obtain, copy, use or disclose our technologies and processes. We cannot assure you that any of our existing or future patents will not be challenged, invalidated or circumvented. As such, any rights granted under these patents may not provide us with meaningful protection. We may not be able to obtain foreign patents or pending applications corresponding to our U.S. patent applications. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. If our patents and other intellectual property do not adequately protect our technology, our competitors may be able to offer products similar to ours. Our competitors may also be able to develop similar technology independently or design around our patents. Any of the foregoing events would lead to increased competition and lower revenue or gross margins, which would adversely affect our net income.
 
15
 

 

We may be subject to alleged infringement claims.
 
     We may be subject to intellectual property infringement claims from individuals, vendors and other companies who have acquired or developed patents in the fields of 3D printing or consumable production for purposes of developing competing products or for the sole purpose of asserting claims against us. Any claims that our products or processes infringe the intellectual property rights of others, regardless of the merit or resolution of such claims, could cause us to incur significant costs in responding to, defending and resolving such claims, and may prohibit or otherwise impair our ability to commercialize new or existing products. If we are unable to effectively defend our processes, our market share, sales and profitability could be adversely impacted.
 
As our patents expire, additional competitors using our technology could enter the market, which could require us to reduce our prices and result in a reduction of our market share. Competitors introduction of lower quality products using our technology could also negatively affect the reputation and image of our products in the marketplace.
 
     The initial patents for our technology will begin to expire in 2011. Upon expiration of those patents, our competitors may introduce products using the same technology as ours that have lower prices than those for our products. To compete, we may need to reduce our prices, which would adversely affect our revenues, margins and profitability. Additionally, the expiration of our patents could reduce barriers to entry into the market for additive fabrication systems, which could result in the reduction of our market share and earnings potential. If competitors using our technology were to introduce products of inferior quality, our potential customers may view our products negatively, which would have an adverse effect on our image and reputation and on our ability to compete with systems using other additive fabrication technologies.
 
If our intangible assets become impaired, we may be required to record a significant charge to earnings.
 
     As of December 31, 2010, the net book value of our intangible assets was approximately $6.4 million. Accounting rules require us to take a charge against our earnings to the extent that any of these intangible assets are impaired. Accordingly, invalidation of our patents, trademarks or other intellectual property or the impairment of other intangible assets due to litigation, obsolescence, competitive factors or other reasons could result in a material charge against our earnings and have a material adverse effect on our results of operations.
 
If our investments become impaired, we may be required to record a significant charge to earnings.
 
     Our investments include tax-free Auction Rate Securities (ARS) and municipal government bonds, all of which are insured. Given the current volatility in interest rates and the potential impact of higher interest rates on the issuers of these securities, a significant increase in interest rates could impair the ability of one or more issuers to pay interest on, or principal of, these obligations. Defaults by these issuers or their insurers could cause an impairment of the value of our investments, resulting in a charge against our earnings. Any such charge could have a material adverse effect on our results of operations.
 
Estimating our income tax rate is complex and subject to uncertainty.
 
     The computation of income tax expense (benefit) is complex because it is based on the laws of numerous taxing jurisdictions and requires significant judgment on the application of complicated rules governing accounting for tax provisions under accounting principles generally accepted in the United States. Income tax expense (benefit) for interim quarters is based on a forecast of our global tax rate for the year, which includes forward looking financial projections. Such financial projections are based on numerous assumptions, including the expectations of profit and loss by jurisdiction. It is difficult to accurately forecast various items that make up the projections, and such items may be treated as discrete accounting. Examples of items that could cause variability in our income tax rate include our mix of income by jurisdiction, tax deductions for stock option expense, the application of transfer pricing rules, tax audits and changes to our valuation allowance for deferred tax assets. Future events, such as changes in our business and the tax law in the jurisdictions where we do business, could also affect our rate. For these reasons, our global tax rate may be materially different than our estimate.
 
If we do not generate sufficient future taxable income, we may be required to recognize additional deferred tax asset valuation allowances.
 
     The value of our deferred tax assets depends, in part, on our ability to use them to offset taxable income in future years. If we are unable to generate sufficient future taxable income in the U.S. and certain other jurisdictions, or if there are significant changes in tax laws or the tax rates or the period within which the underlying temporary differences become taxable or deductible, we could be required to increase our valuation allowance against our deferred tax assets. Such an increase would result in an increase in our effective tax rate and have a negative impact on our operating results. If our estimated future taxable income is increased, the valuation allowances for deferred tax assets may be reduced. These changes may also contribute to the volatility of our financial results.
 
We operate a global business that exposes us to additional risks.
 
     Our sales outside of the United States accounted for approximately 47% of our consolidated net sales in 2010. We continue to expand into international markets. The future growth and profitability of our foreign market is subject to a variety of risks and uncertainties. Any of the following factors could adversely affect our sales to customers located outside of the United States:
16
 

 

     Our business depends on our customers’ demand for our products and services, the general economic health of current and prospective customers, and their desire or ability to make investments in technology. A deterioration of global, regional or local political, economic or social conditions could affect potential customers in ways that reduce demand for our products and disrupt our manufacturing and sales plans and efforts. Acts of terrorism, wars, public health issues and increased energy costs could disrupt commerce in ways that could impair our ability to get products to our customers and increase our manufacturing and delivery costs. Changes in foreign currency exchange rates may negatively impact reported revenue and expenses. In addition, our sales are typically made on unsecured credit terms that are generally consistent with the prevailing business practices in the country in which the customer is located. A deterioration of political, economic or social conditions in a given country or region could reduce or eliminate our ability to collect accounts receivable in that country or region. In any of these events, our results of operations could be materially and adversely affected.
 
Our operating results and financial condition may fluctuate.
 
     Our operating results and financial condition may fluctuate from quarter-to-quarter and year-to-year and are likely to continue to vary due to a number of factors, many of which are not within our control. If our operating results do not meet the expectations of securities analysts or investors, who may derive their expectations by extrapolating data from recent historical operating results, the market price of our common stock will likely decline. Fluctuations in our operating results and financial condition may be due to a number of factors, including, but not limited to, those listed below and those identified throughout this “Risk Factors” section:
Due to all of the foregoing factors, and the other risks discussed in this report, you should not rely on quarter-to-quarter comparisons of our operating results as an indicator of future performance.
 
17
 

 

Default in payment by one or more resellers that have large account receivable balances could adversely impact our results of operations and financial condition.
 
     From time to time, accounts receivable balances have been concentrated with certain resellers. Default by one or more of these resellers or customers could result in a significant charge against our current reported earnings. We have reviewed our policies that govern credit and collections, and will continue to monitor them in light of current payment status and economic conditions. Default by one or more of these resellers would result in a significant charge against our earnings and adversely affect our results of operations and financial condition.
 
If we are unable to retain our key operating personnel and attract additional skilled operating personnel, our development of new products will be delayed and our personnel costs will increase.
 
     Our growth plans require us to retain key employees in, and to hire additional skilled employees for, our operating departments, such as engineering and software development, to enhance existing products and develop new products. Our inability to retain and hire key engineers and other employees could delay our development and introduction of new products, which would adversely affect our revenues. In addition, a possible shortage of such personnel in the Minneapolis region could require us to pay more to retain and hire key employees, thereby increasing our costs.
 
Our common stock price has been and may continue to be highly volatile.
 
     During 2010, our common stock traded at prices ranging between $17.35 and $34.87, and has traded as high as $49.62 in 2011. Factors that we believe have caused or may cause this volatility include, among other things:
     Many of these factors are beyond our control. These factors may have a material adverse effect on the market price of our common stock, regardless of our operating performance.
 
If our internal controls over financial reporting do not comply with the requirements of the Sarbanes-Oxley Act, our business and stock price could be adversely affected.
 
     Section 404 of the Sarbanes-Oxley Act of 2002 requires us to evaluate the effectiveness of our internal controls over financial reporting as of the end of each year, and to include a management report assessing the effectiveness of our internal controls over financial reporting in all annual reports. Section 404 also requires our independent registered public accounting firm to report on the effectiveness of our internal controls over financial reporting.
 
     Our management, including our CEO and CFO, does not expect that our internal controls over financial reporting will prevent all error and fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, involving Stratasys have been, or will be detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and we cannot assure you that any design will succeed in achieving its stated goals under all potential future conditions. Over time, our controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
 
18
 

 

     Although our management has determined, and our independent registered public accounting firm has concluded in its audit, that our internal controls over financial reporting were effective as of December 31, 2010, we cannot assure you that we or our independent registered accounting firm will not identify a material weakness in our internal controls in the future. A material weakness in our internal controls over financial reporting would require management and our independent registered public accounting firm to evaluate our internal controls as ineffective. If our internal controls over financial reporting are not considered adequate, we may experience a loss of public confidence, which could have an adverse effect on our business and our stock price.
 
     The foregoing list is not exhaustive. There can be no assurance that we have correctly identified and appropriately assessed all factors affecting our business or that the publicly available and other information with respect to these matters is complete and correct. Additional risks and uncertainties not presently known to us or that we currently believe to be immaterial also may adversely impact our business. Should any risks or uncertainties develop into actual events, these developments could have material adverse effects on our business, financial condition, and results of operations.
 
     We assume no obligation (and specifically disclaim any such obligation) to update these Risk Factors or any other forward-looking statements contained in this Annual Report to reflect actual results, changes in assumptions or other factors affecting such forward-looking statements.
 
As part of our growth strategy, we may acquire or make investments in other businesses, patents, technologies, products or services, and our failure to do so successfully may adversely affect our competitive position or financial results.
 
     We have made and expect to continue to make acquisitions or investments to expand our suite of products and services. Our growth could be hampered if we are unable to identify suitable acquisitions and investments or agree on the terms of any such acquisition or investment. We may not be able to consummate any such transaction if we lack sufficient resources to finance the transaction on our own and cannot obtain financing at a reasonable cost. If we are not able to complete such acquisitions and successfully integrate them, or to complete investments and successfully realize the intended benefits of them, our competitive position may suffer, which could have adverse impacts on our revenues, revenue growth and results of operations.
 
Our acquisition transactions may not succeed in generating the intended benefits and may, therefore, adversely affect shareholder value or our financial results.
 
     Integration of new businesses or technologies into our business may have any of the following adverse effects:
     The inability of our management to successfully integrate acquired businesses, and any related diversion of management’s attention, could have a material adverse effect on our business, operating results and financial condition.
 
19
 

 

Business combinations and other acquisition transactions may have a direct adverse effect on our financial condition, results of operations or liquidity, or on our stock price.
 
     In order to complete such transactions, we may have to use cash, issue new equity securities with dilutive effects on existing stockholders, take on new debt, assume contingent liabilities or amortize assets or expenses in a manner that might have a material adverse effect on our balance sheet, results of operations or liquidity. We are required to record certain acquisition-related costs and other items as current period expenses, which would have the effect of reducing our reported earnings in the period in which an acquisition is consummated. We are also required to record post-closing goodwill or other long-lived asset impairment charges in the period in which they occur, which could result in a significant charge to our earnings in that period. These and other potential negative effects of an acquisition transaction could prevent us from realizing the benefits of such transactions and have a material adverse impact on our stock price, revenues, revenue growth, balance sheet, results of operations and liquidity.
 
Item 1B. Unresolved Staff Comments.
 
     None.
 
Item 2. Properties.
 
     Our executive offices and production facilities presently comprise approximately 287,800 available square feet in four buildings we own in Eden Prairie, Minnesota, near Minneapolis.
 
20
 

 

     On August 1, 2001, we purchased our Eden Prairie manufacturing facility and land for approximately $3.0 million. The facility consists of 62,100 square feet, and is used for machine assembly, inventory storage, operations and sales support.
 
     In March 2004, we purchased an additional 43,900 square foot manufacturing facility for approximately $1.2 million. The facility is located near our manufacturing facility in Eden Prairie, Minnesota, and is used for our RedEye paid parts service.
 
     In November 2005, we purchased an additional 91,800 square foot manufacturing facility for approximately $5.1 million. By the end of 2008, we had substantially completed the improvements needed to make this facility suitable for our specific usage and had spent approximately $3.3 million. This facility is used for R&D, filament manufacturing, administrative, marketing and sales activities and is adjacent to our system manufacturing facility in Eden Prairie, Minnesota.
 
     In December 2010, we purchased an additional 90,000 square foot manufacturing facility for approximately $3.0 million. This facility is located in Eden Prairie, Minnesota.
 
     We occupy a 40,835 square foot warehouse in Eden Prairie, Minnesota, for shipping and storage under a lease that expires in March 2012. We also occupy a 9,070 square foot facility in Minneapolis, Minnesota, for research and development under a lease that expires in September 2012. We are also responsible for real estate taxes, insurance, utilities, trash removal, and maintenance expenses at these facilities.
 
     We have two North American sales offices. We occupy a 2,500 square foot sales office under a lease that expires in August 2011 and a 1,440 square foot service office under a lease that expires in August 2011, both of which are located in Ontario, California. We are also responsible for real estate taxes, insurance, utilities, trash removal, and maintenance expenses at these facilities.
 
     We have four international sales and service offices under lease. Our German subsidiary leases 8,041 square feet of space in Frankfurt, Germany under a lease that expires in June 2011. Our Italian subsidiary leases 6,857 square feet in Bologna, Italy, under a lease that expires in August 2013. We occupy a 500 square foot sales office located in Hong Kong under a lease that expires in March 2011. We have approximately 1,500 square feet, which is used for a sales office, in Bangalore, India, under a lease that expires in January 2014.
 
Item 3. Legal Proceedings.
 
     We are party to various legal proceedings, the outcome of which, in the opinion of management, will not have a material adverse effect on the Company’s financial position.
 
Item 4. Reserved.
 
21
 

 

PART II
 
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
 
Market Information
 
     Our common stock is traded on the Nasdaq Global Select Market under the symbol SSYS.
 
     The following table sets forth the high and low closing sale prices of our common stock for each quarter from January 1, 2009 through the fiscal year ended December 31, 2010 reported on the Nasdaq Global Select Market.
 
        High       Low
    Closing Sale Prices
Fiscal Year Ended December 31, 2009            
       January 1, 2009 – March 31, 2009   $       12.70   $       7.70
       April 1, 2009 – June 30, 2009     13.94     8.60
       July 1, 2009 – September 30, 2009     17.21     10.32
       October 1, 2009 – December 31, 2009     18.98     14.85
             
Fiscal Year Ended December 31, 2010            
       January 1, 2010 – March 31, 2010   $ 30.11   $ 17.35
       April 1, 2010 – June 30, 2010     27.40     21.79
       July 1, 2010 – September 30, 2010     27.84     20.81
       October 1, 2010 – December 31, 2010     34.87     26.48

     There were approximately 86 record and 10,741 beneficial owners of our common stock as of March 1, 2011.
 
Dividends
 
     We have not paid or declared any cash dividends to date. We intend to retain earnings, if any, to support the growth of our business.
 
Repurchases of Common Stock
 
     We did not repurchase any shares of our common stock in the fourth quarter of 2010.
 
22
 

 

Performance Graph
 
     The following graph compares on a cumulative basis the yearly percentage change, assuming dividend reinvestment, over the last five fiscal years in (a) the total stockholder return on our Common Stock with (b) the total return on the Nasdaq (US) Composite Index, and (c) the total return on the information technology sector of the Standard & Poor’s SmallCap 600 Index (“S&P 600 Info Tech Index”). The S&P 600 Info Tech Index consists of 125 of the 600 stocks comprising the Standard & Poor’s SmallCap 600 Index, a capitalization-weighted index of domestic stocks chosen for market size, liquidity and industry representation. We are a component company of the S&P 600 Info Tech Index. The following graph assumes that $100 had been invested in each of Stratasys, the Nasdaq (US) Composite Index, and the S&P 600 Info Tech Index on December 31, 2005.
 
Comparison of Cumulative 5 Year Total Return
 
23
 

 

Item 6. Selected Financial Data.
 
     The selected consolidated financial data as of and for the five-year period ended December 31, 2010, should be read in conjunction with the Consolidated Financial Statements and related Notes for the year ended December 31, 2010, and the Management’s Discussion and Analysis of Financial Condition and Results of Operations.
 
    Years Ended December 31,
    (In Thousands, Except Per Share Amounts)
        2010       2009       2008       2007       2006
Statement of Operations Data:                              
Net sales   $ 117,099   $ 98,356   $ 124,495   $ 112,243   $ 103,809
Gross profit     56,086     46,384     66,412     59,708     51,441
Research and development     9,755     7,737     8,973     7,465     6,699
Selling, general and administrative                              
       expenses     32,863     32,823     36,843     33,770     29,105
Operating income     13,467     5,824     20,596     18,473     15,637
Net income     9,370     4,116     13,615     14,324     11,164
Net income per basic common share     0.46     0.20     0.66     0.69     0.55
Weighted average basic shares                              
       outstanding     20,579     20,236     20,676     20,772     20,240
Net income per diluted common                              
       share   $ 0.44   $ 0.20   $ 0.65   $ 0.66   $ 0.54
Weighted average diluted shares                              
       outstanding     21,130     20,268     21,079     21,567     20,723
Balance Sheet Data:                              
Working capital   $ 58,243   $ 82,838   $ 63,296   $ 64,100   $ 55,311
Total assets            178,460            153,137            147,743            148,757            118,004
Long term debt     ---     ---     ---     ---     ---
Stockholders’ equity     152,282     129,583     122,562     123,834     97,792

24
 

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operation.
 
Introduction
 
     Management’s Discussion and Analysis of Financial Condition and Results of Operations are intended to facilitate an understanding of our business and results of operations. It should be read in conjunction with our Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included elsewhere in this report. All amounts in the following discussions are stated in thousands, except employees, share and per share data, prices for systems, or as otherwise indicated.
 
General
 
     We develop, manufacture, and market a family of 3D printing, rapid prototyping (“RP”) and direct digital manufacturing (“DDM”) systems, which enable engineers and designers to create physical models, tooling, jigs, fixtures, prototypes, and end use parts out of production grade thermoplastic directly from a computer aided design (“CAD”) workstation. Our systems and related consumable products are distributed mainly through a world-wide network of value added resellers that sell and service our products to end users. We also operate a service business that uses our systems to print parts from a customer’s CAD file, typically in situations where these customers have not yet purchased a system or do not have enough capacity on their existing systems.
 
     Our Market Strategy
 
     We believe that the Fused Deposition Modeling (“FDM”) technology used by our systems has significant advantages over other commercially available 3D printing technologies. When compared to other 3D printing technologies, our systems are typically easier to use, are more acceptable in an office environment and can produce durable models in a wide variety of production grade thermoplastics. Our overall business strategies are designed to increase customer awareness of these advantages, provide our customers with high-quality new products and services based on the capabilities of this technology, expand the distribution channel of our systems and lower the overall cost of creating physical models, parts, tooling and prototypes from a CAD file.
 
     Our current market strategy focuses on the following areas:
25
 

 

     Description of Current Conditions
 
     Our revenue increased 19.1% in 2010 due primarily to growth in systems and consumables sales, with service revenue being essentially flat. The increase in our revenue from systems as compared to 2009 was driven mainly by higher unit volume in our high-performance RP production systems. We shipped 2,555 units in 2010, an increase of 637 units, or 33.2%, from 1,918 in 2009. Although we have recently introduced systems at lower price points, our average system selling price increased slightly from 2009. This overall price increase was mainly due to significant growth in our high-performance systems that offset the growth in 3D printing systems where average selling prices have been reduced.
 
     We have seen the professional design/engineering market environment for our products become more competitive as other manufacturers introduce systems with new technologies and capabilities that are becoming more comparable to our products. In the last 12 months, we have seen our traditional competitors lower their prices to match our prices. In a new hobbyist market, we have also seen companies develop systems that are based on basic, early-stage, open-source technology but which lack the sophisticated system controls needed for the professional market.
 
26
 

 

     Despite the recent growth in market competition, we believe that over the last three years, we have been the market leader in the 3D printer commercial market and have followed a strategy of continuing to move down the price elasticity curve as evidenced by our introduction of the uPrint and uPrint Plus. Although the high-performance market is more competitive than the 3D printing market, we believe that the growth in sales of our high-performance 3D production systems has been driven mainly by the system and material performance capabilities of our systems rather than price.
 
     As our installed base of systems has increased, the capacity to derive an increasing amount of revenue from sales of consumables, maintenance contracts, and other services has also increased. In 2010, total non-system product revenue increased by 29.0% as compared to the prior year due principally to higher consumable usage by our installed base of systems. Sales from our RedEye paid parts service increased 21.1% during 2010 as a result of the economic recovery and increased demand for FDM technology in DDM applications. Revenue from maintenance contracts declined by 8.1% in 2010 as this was the first full year of the warranty period extension that we implemented in 2009.
 
     During the first quarter of 2010, we signed the OEM Agreement with HP and began shipping HP-branded DesignJet systems and related products. Shortly thereafter, HP began selling these systems through its own reseller network in five European countries. Although our overall HP-branded system revenue in 2010 was not material, by December 31, 2010, the number of units sold in the five-country territory was slightly more than three times the comparable unit sales in the prior year period, when we were selling a similar Stratasys branded system. During that same period, we saw revenue from the HP-branded 3D printers double as compared to revenue from Stratasys-branded systems in the prior year.
 
     We expect to see unit volume increase faster than revenue growth in the near future, which will result in lower margins on the sale of these 3D printers. We intend to compensate for these smaller margins by the continued growth of the market for 3D printers and thereby substantially increasing the number of 3D printers sold and our overall revenues and profits. However, there can be no assurance that we will be able to increase our revenue sufficiently to maintain or increase our current profitability.
 
     Given our strong cash position and no debt, we believe that we have adequate liquidity to fund our growth strategy in 2011. We may make investments in strategic acquisitions, fixed assets, process improvements, information technology (“IT”), and human resource development activities that will be required for future growth. Our expense levels are based in part on our expectations of future sales and we will make adjustments as we consider appropriate. While we have adjusted, and will continue to adjust, our expense levels based on both actual and anticipated sales, fluctuations in sales in a particular period could adversely impact our operating results.
 
     We believe that our growth is largely dependent upon our ability to penetrate new markets and develop and market new RP, DDM and 3D printing systems, materials, applications, and services that meet the needs of our current and prospective customers. Our ability to implement our strategy for 2011 is subject to numerous uncertainties, many of which are described under “Risk Factors,” above, in this Management’s Discussion and Analysis of Financial Condition and Results of Operations and in the section below captioned “Forward Looking Statements and Factors That May Affect Future Results of Operations.” We cannot ensure that our efforts will be successful.
 
Results of Operations
 
     The following table sets forth certain statement of operations data as a percentage of net sales for the periods indicated. All items are included in or derived from our consolidated statement of operations.
 
For the twelve months ended December 31,       2010       2009       2008
Net sales          100.0 %          100.0 %          100.0 %
Cost of sales   52.1 %   52.8 %   46.7 %
Gross profit   47.9 %   47.2 %   53.3 %
Research & development   8.3 %   7.9 %   7.2 %
Selling, general and administrative   28.1 %   33.4 %   29.6 %
Operating income   11.5 %   5.9 %   16.5 %
Other income (expense)   0.3 %   0.4 %   0.1 %
Income before taxes   11.8 %   6.3 %   16.7 %
Income taxes   3.8 %   2.1 %   5.7 %
Net income   8.0 %   4.2 %   10.9 %

27
 

 

Net Sales
 
     Net sales of our products and services for the last three years, as well as the percentage change were as follows:
 
        Year-over-       Year-over-    
        2010       Year Change       2009       Year Change       2008
Products   $ 96,722                   32.1 %   $ 73,210                 -26.0 %   $ 98,969
Services     25,365     0.9 %     25,146   -1.5 %     25,526
Fair value of warrant     (4,988 )   -       -   -       -
    $        117,099        19.1 %   $        98,356   -21.0 %   $        124,495
 

     Product Revenue
     Revenues derived from products (including systems, consumable materials and other products) increased $23.5 million in 2010, or 32.1%, as compared to the prior year. The number of systems shipped increased by 33.2%, or 637 units, to 2,338 as compared to 1,918 units shipped in 2009. This increase in both revenue and number of systems shipped reflects the positive impact of the economic recovery and strong sales of our Stratasys-brand 3D printer products and the new HP Designjet line. Consumable revenue in 2010 increased 27.6%, which was driven by the improvement in market conditions and growing installed base of systems.
 
     During 2009, revenues derived from products decreased $25.8 million, or 26.0% as compared to the prior year. The number of systems shipped decreased by 12.2%, or 266 units, to 1,918 as compared to 2,184 units shipped in 2008. This decrease in both revenue and number of systems shipped was primarily attributable to the worldwide economic slowdown that constricted capital spending budgets across all industries. Revenue derived from products decreased at a greater rate than system shipments due to a product mix that favored the lower-priced uPrint. Consumable revenue in 2009 decreased 4.3%, which was a much lower decline as compared to the decline in our system revenue. Consumable revenue is directly related to our installed base and is less susceptible to current market conditions than our revenue from system sales.
 
     Service Revenue
     Revenues from our service offerings (including RedEye paid parts, maintenance and other services) for 2010 were relatively flat as compared to the prior year. Growth in our RedEye paid parts service revenue of 21.1% over the prior year resulted from the general economic upturn and continued recovery from a period of highly competitive pricing that occurred during the recession in 2009. This growth was offset by a decrease in maintenance revenue, which resulted from our expansion of the warranty period for our domestic Fortus systems from three months to one year. In 2009, we saw a 13% decrease in our RedEye paid parts service revenue from the prior year that was partially offset by growth in our maintenance contract revenue.
 
     Revenue by Region
     Net sales, excluding the $5.0 million charge for the fair value of a warrant related to the OEM Agreement in 2010, and the percentage of net sales by region for the last three years, as well as the percentage change were as follows:
 
              Year-over-       Year-over-    
        2010       Year Change       2009       Year Change       2008
North America   $ 65,139 53 %                 18.1 %   $ 55,156   56 %                 -17.3 %   $ 66,698   54 %
Europe     34,362 28 %   30.6 %     26,309   27 %   -29.7 %     37,430   30 %
Asia Pacific     20,536 17 %   29.9 %     15,814   16 %   -14.7 %     18,534   15 %
Other     2,050 2 %   90.3 %     1,077   1 %   -41.2 %     1,833   1 %
    $ 122,087          100 %   24.1 %   $ 98,356          100 %   -21.0 %   $ 124,495          100 %
 

     Sales in all regions increased in 2010 as a result of the economic recovery and continued improvement in business conditions across our core markets. Revenues in the North America region, accounted for approximately 53% of total revenue in 2010. Revenues outside of North America accounted for approximately 47% of total revenue in 2010. The international increase in sales percentage was led by higher system sales volumes in both high-performance systems as well as 3D Printers, particularly the HP Designjet line in the five European markets served by HP.
 
28
 

 

     Sales in all regions declined in 2009 due to lower volumes as a result of the economic slow down combined with an overall lower average selling price that resulted primarily from our introduction of the uPrint in January 2009 as part of our strategy of continuing to move down the price elasticity curve.
 
     Revenues in the North America region, accounted for approximately 56% of total revenue in 2009. The slight increase in sales percentage as compared to the prior year was primarily due to the launch of the uPrint, which had an earlier domestic launch than it did internationally. Revenues outside of North America accounted for approximately 44% of total revenue in 2009. The international decrease was led by lower system volumes in both the high-performance systems as well as 3D Printers, particularly in the first half of 2009, was principally due to the worldwide economic downturn.
 
     Fair Value of Warrant
     During the first quarter of 2010, we signed the OEM Agreement with HP to develop and manufacture a line of HP-branded 3D printers. In connection with the OEM Agreement, we issued a warrant to HP during the first quarter of 2010 to purchase 500,000 shares of common stock at an exercise price of $17.78 per share. The exercise price was determined by the 20 day average market closing price of our common stock immediately prior to the issuance of the warrant. The warrant vested immediately and has a seven-year term. The warrant was not exercised during 2010. The grant date fair value of the warrant was classified as a reduction of revenue on the Consolidated Statement of Operation for the year ended December 31, 2010.
 
Gross Profit
 
     Gross profit and gross profit as a percentage of sales for our products and services for 2010, 2009 and 2008, as well as the percentage changes in gross profit were as follows:
 
        Year-over-       Year-over-        
        2010       Year Change       2009       Year Change       2008
Products   $ 47,109     45.9 %   $ 32,285     -37.1 %   $ 51,297  
Services     13,965     -1.0 %     14,099     -6.7 %     15,116  
Fair value of warrant     (4,988 )   -       -     -       -  
    $        56,086                   20.9 %   $        46,384                   -30.2 %   $        66,413  
                         
Gross Profit as a Percentage of Related Sales                        
Products     48.7 %           44.1 %           51.8 %
Services     55.1 %           56.1 %           59.2 %
Total     47.9 %           47.2 %           53.3 %

     Product gross profit increased by $14.8 million, or 45.9%, to $47.1 million in 2010 as compared with $32.3 million in 2009. This increase is primarily attributable to higher system revenues. The increase was also attributable to significant growth in our high-end RP systems that exceeded the rate of growth in revenue from our lower priced 3D printing systems.
 
     Product gross profit decreased by $19.0 million, or 37.1%, to $32.3 million in 2009 as compared with $51.3 million in 2008. This decrease is primarily attributable to lower system revenues. The decrease was also attributable to the launch of our uPrint system, which has a lower direct margin than our other systems and added to our fixed manufacturing overhead.
 
     Gross profit from services decreased by 1.0% in 2010. This is primarily attributable to a decrease in maintenance revenue, which resulted from our expansion of the warranty period for our domestic Fortus systems from three months to one year. Gross profit from services decreased by 6.7% in 2009. This decrease is primarily attributable to an aggressive pricing environment and worldwide economic slowdown experienced by our RedEye paid parts service.
 
29
 

 

Operating Expenses
 
     Operating expenses and operating expense as a percentage of sales for 2010, 2009 and 2008, as well as the percentage change in operating expenses, were as follows:
 
        Year-over-       Year-over-    
        2010       Year Change       2009       Year Change       2008
Research and development   $ 9,755                   26.1 %   $ 7,737                   -13.8 %   $ 8,973  
Selling, general & administrative     32,863     0.1 %     32,823     -10.9 %     36,843  
    $        42,618     5.1 %   $        40,560     -11.5 %   $        45,816  
Percentage of Sales     36.4 %           41.2 %           36.8 %

     Research and development expenses increased by 26.1% during 2010 as we remained committed to designing new products and materials, reducing costs on existing products, and improving the quality and reliability of all of our platforms. This spending was focused on accelerating our development efforts to address both the 3D printer and DDM market opportunities as well as improving the quality and reliability of our products. During 2009, research and development expenses decreased by 13.8% as a result of lower spending due to economic concerns, reduced headcount and higher joint development reimbursements. In 2010, 2009 and 2008, capitalized software additions were approximately $1.2 million, $1.4 million and $2.1 million, respectively.
 
     In 2008, we fulfilled our responsibilities under a three-year, $3.6 million agreement with a Fortune 500 global manufacturing company to jointly advance our proprietary FDM technology for rapid manufacturing applications. This agreement entitled us to receive reimbursement payments as we achieved specific milestones stated in the agreement. This effort was focused around our high-performance systems and resulted in the commercial release of the Fortus 900mc. Because receipt of these payments represent reimbursements of costs actually incurred under this joint development project, all payments received were recorded as offsets to the research and development expenditures and are therefore not recognized as revenue.
 
     Due to the success of this initial arrangement, we are continuing this relationship under similar terms and objectives. During the years ended December 31, 2010, 2009 and 2008, approximately $1.2 million, $2.2 million, and $0.3 million, respectively, of research and development expenses were offset by payments that we received from this company.
 
     Selling, general and administrative expenses were relatively flat in 2010 as compared to the prior year. Selling, general and administrative expenses decreased by 10.9% in 2009. This decrease was primarily attributable to: 1) a reduction in our direct sales force in January of 2009, which converted some of our selling expenses to a variable cost structure; 2) additional headcount reductions made in the first quarter of 2009; and 3) a continued effort to lower discretionary spending.
 
     In addition, we took certain cost-saving measures in the first quarter of 2009 that lowered fixed costs and curtailed some discretionary spending while maintaining a focus on the key goals and objectives of our long-term strategy. These cost-saving measures resulted in a charge of $779,000 in the first quarter of 2009, consisting primarily of severance costs related to a reduction in workforce. Final severance payments were completed during the third quarter of 2009 and the unused portion of the provision, noted as “adjustments” in the table below, was recorded in income for the current period.
 
     A summary of the activity of these restructuring and other costs recognized in the Statement of Operations caption “Selling, general and administrative” are as follows:
 
    Employee-   Contract    
    Related Items   Terminations    
        and Benefits       and Other       Total
Accrued balance as of December 31, 2008   $ 306,014     $ 66,881     $ 372,895  
Expenses incurred     779,000       -       779,000  
Cash payments     (810,707 )              (66,881 )     (877,588 )
Adjustments            (274,307 )     -              (274,307 )
Accrued balance as of December 31, 2009   $ -     $ -     $ -  
                         
30
 

 

Operating Income
 
     Operating income and operating income as a percentage of sales for 2010, 2009 and 2008, as well as the percentage change in operating income were as follows:
 
        Year-over-           Year-over-        
        2010       Year Change       2009       Year Change       2008
Operating income   $        13,467                   131.2 %   $        5,824                   -71.7 %   $        20,596  
Percentage of Sales     11.5 %           5.9 %           16.5 %

     Operating income in 2010 increased by $7.6 million, primarily due to the significant increase in revenue, partially offset by increased indirect spending. Operating income as a percentage of sales increased due to effective control of indirect spending in 2010. Operating income in 2009 declined by $14.8 million, primarily due to the significant drop in revenue, partially offset by reductions of indirect spending.
 
Other Income
 
     Other income and other income as a percentage of sales for 2010, 2009 and 2008, as well as the percentage change in operating income were as follows:
 
            Year-over-       Year-over-    
        2010       Year Change       2009       Year Change       2008
Interest income   $ 921     -7.0 %   $ 990     -51.4 %   $ 2,037  
Foreign currency transaction losses, net            (617 )   164.8 %     (233 )   -72.1 %     (835 )
Other     64                 116.1 %            (398 )   62.6 %            (1,065 )
    $ 368     2.5 %   $ 359                   162.0 %   $ 137  
Percentage of Sales     0.3 %           0.4 %           0.1 %

     Interest income in 2010 decreased by $69,000 while investments increased over the prior year. This was primarily due to $170,000 of interest earned in 2009 on two bonds that were redeemed by the issuer before maturity. While the 2009 cash and investment balance increased over 2008, interest income was lower as a result of a higher percentage of our holdings were invested in low-yield government securities.
 
     We invoice sales to certain European distributors in Euros and reported results are therefore subject to fluctuations in the exchange rates of that currency in relation to the United States dollar. Our strategy is to hedge most of our Euro-denominated accounts receivable positions by entering into 30-day foreign currency forward contracts on a month-to-month basis to reduce the risk that our earnings will be adversely affected by changes in currency exchange rates. We do not use derivative financial instruments for speculative or trading purposes.
 
     We will continue to monitor exposure to currency fluctuations. Instruments to hedge risks may include foreign currency forward, swap, and option contracts. These instruments will be used to selectively manage risks, but there can be no assurance that we will be fully protected against material foreign currency fluctuations. At December 31, 2010 we had approximately €4.5 million, or $6.0 million, net in Euro-denominated receivables and a €4.5 million, or $6.0 million, 30-day forward contract.
 
     The decrease in other income for 2010 as compared to the prior year results from a $350,000 reduction in the estimated fair value of an equity investment in 2009 that was considered to be other than temporary. The 2008 amount includes an impairment charge of $1.3 million related to a $2.6 million investment in a Jefferson County, Alabama municipal bond.
 
31
 

 

Income Taxes
 
     Income taxes and income taxes as a percentage of net income before taxes for 2010, 2009 and 2008, as well as the percentage change were as follows:
 
          Year-over-           Year-over-    
        2010       Year Change       2009       Year Change       2008
Income taxes   $        4,466                   116.2 %   $        2,066                   -71.0 %   $        7,118  
As a percent of                                    
income before income taxes     32.3 %           33.4 %           34.3 %

     The following is a reconciliation of the 2010 effective income tax rate compared with the 2009 effective rate and the 2009 effective income tax rate compared with the 2008 effective rate:
 
2010 Effective income tax rate       32.3 %
2010 percentage decrease in research and development credits   (3.0 %)
2010 percentage decrease in tax contingency reserve   1.1 %
2010 percentage increase in manufacturing deduction   1.5 %
Other, net   1.5 %
2009 Effective income tax rate   33.4 %
2009 percentage increase in research and development credits   2.8 %
2009 percentage increase in tax contingency reserve   (1.5 %)
Other, net   (0.4 %)
2008 Effective income tax rate           34.3 %
 

Net Income
 
     Net income and net income as a percentage of sales for 2010, 2009 and 2008, as well as the percentage change in net income were as follows:
 
            Year-over-           Year-over-        
        2010       Year Change       2009       Year Change       2008
Net income   $        9,370                   127.6 %   $        4,116                   -69.8 %   $        13,615  
Percentage of Sales     8.0 %           4.2 %           10.9 %

     For the reasons cited previously in this management discussion and analysis section, our net income for the year ended December 31, 2010 was higher than the prior year and net income for 2009 was lower than the prior year.
 
32
 

 

Liquidity and Capital Resources
 
     A summary of our statement of cash flows for the three years ended December 31, 2010 is as follows:
 
        2010       2009       2008
Net income   $ 9,370     $ 4,116     $ 13,615  
Depreciation and amortization     9,342       8,256       7,004  
Stock-based compensation     1,242       1,137       1,322  
Fair value of warrant related to OEM agreement     4,988       -       -  
Change in working capital and other     (456 )     11,981       (7,450 )
Net cash provided by operating and other activities     24,486       25,490       14,491  
Net cash provided by (used in) investing activities     (49,294 )     (6,831 )     13,290  
Net cash provided by (used in) financing activities     4,266       1,583       (15,856 )
Effect of exchange rate changes on cash     (219 )     128       (191 )
Net increase (decrease) in cash and cash equivalents     (20,761 )     20,370       11,734  
Cash and cash equivalents, beginning of year     48,316       27,946       16,212  
Cash and cash equivalents, end of year   $         27,555     $         48,316     $         27,946  
 

     Our cash and cash equivalents balance decreased by $20.8 million to $27.6 million at December 31, 2010, from $48.3 million at December 31, 2009. The decrease is primarily due to $49.3 spent for the acquisition of investments, property and equipment, and intangible assets partially offset by $22.0 million of cash flows from operations.
 
     The net cash provided by our operating activities over the past three years has amounted to approximately $62.0 million, principally derived from $27.1 million in net income, plus adjustments for non-cash charges of $24.6 million in depreciation and amortization, $3.7 million in stock-based compensation, $5.0 million related to the fair value of a warrant issued to HP and $1.6 million attributable to changes in net working capital and other items.
 
     In 2010, the principal source of cash from our operating activities was our net income, as adjusted to exclude the effects of non-cash charges. Our 2010 net accounts receivable balance was relatively flat as compared with 2009. Although we continue to offer 180-day extended terms to our 3D printer resellers for demo units, we have seen a continued reduction in our days sales outstanding (“DSO”) as a result of increased collection efforts and the timing of sales within the quarter. DSO’s were 55 days in 2010, 68 days in 2009 and 78 days in 2008. We believe that adequate allowances have been established for any collectibility issues in our accounts receivable balance.
 
     For the years ended December 31, 2010, 2009, and 2008, our inventory balances were $17.9 million, $14.6 million, and $19.9 million, respectively. The increase in inventory from 2009 to 2010 was principally due to strong order flow and forecasts for systems and consumables. The decrease in inventory from 2008 to 2009 was principally due to increased focus on inventory management and lower overall demand for our products.
 
     We have instituted better inventory management practices, but recognize that we have opportunities to make considerably more improvements in order to reduce overall inventory levels and improve turns. A significant portion of our inventory is dedicated to the fulfillment of our service contract and warranty obligations. As we have introduced new products over the past few years, there are more platforms and models to service than in the past, which increases the requirements to maintain spare parts inventory. With the introduction of these new products, older products have been discontinued, but a certain level of inventory is still required to fulfill our ongoing service contracts. Our procedures for dealing with this inventory are more fully explained in the section below captioned “Critical Accounting Policies.”
 
     Investments in sales-type leases provided cash of $0.9 million in 2010 and $1.3 million in 2009 and used cash of $1.1 million in 2008. In mid-2003 we introduced a U.S. leasing program that was principally designed for the Dimension systems. The program now includes customers in both our 3D printer and our Fortus high-performance system product lines and we plan to continue this leasing program for the foreseeable future.
 
33
 

 

     Accounts payable and other current accrued liabilities provided cash of $4.5 million in 2010 and $1.1 million in 2009 and used cash of $2.1 million in 2008. In 2010, the increase was related to the timing of payments for inventory purchases and employee compensation.
 
     Unearned revenue, principally consisting of purchased maintenance contracts and implied maintenance contracts, provided cash of $0.9 million in 2010, used cash of $2.1 million in 2009 and provided cash of $1.8 million in 2008. The increase in the unearned revenue balance in 2010 was principally due to an increase in orders for Fortus 900mc systems that were not installed as of year end.
 
     Our investing activities used cash of $49.3 million in 2010 and $6.8 million in 2009 and provided cash of $13.3 million in 2008. In 2010 and 2009, the purchase of investments, net of proceeds from sales of investments, used cash of $40.2 and $2.9 million, respectively. In 2008, the sale of investments provided approximately $23.9 million in cash from investing activities.
 
     At December 31, 2010, our investments included:
     The balance sheet caption titled “Long-term investments – available for sale securities” consists of a tax-free ARS. This balance represents the current estimated fair value of an ARS issued by Jefferson County, Alabama with a face value of $2.6 million and matures in 2042. The investment is part of a multi-billion series of bonds issued by Jefferson County to build its sewer and water treatment system (“system”). The County entered into interest rate swaps to protect itself from rising interest rates, but the swaps proved ineffective and the revenue from the system will not adequately support the higher interest rates. With the collapse of the ARS market and the County’s financial condition, the rating of this ARS has gone from Aaa to Caa3. We have received $50,000 in principal payments on this ARS and no additional principal payments have become due. We have received all scheduled interest payments on this ARS through December 31, 2010. Due to the current financial condition of the County and the absence of an active market for this security, we only record interest income as cash payments are received.
 
     With the assistance of outside consultants, we periodically review the Jefferson County ARS, including expected cash flows, assess the credit risk, analyze and extrapolate yield information on comparable composites, and review independent research from various public sources concerning the ARS market. Based upon a reevaluation that occurred in late 2010, we concluded that the fair value of this ARS had increased and we adjusted its carrying value to eliminate the amount of previously recognized temporary impairment.
 
     At December 31, 2009, we recorded a $350,000 impairment related to a $1.4 million equity investment that is accounted for under the cost method as prescribed by ASC Topic 325-20 “Cost Method Investments”. During the fourth quarter of 2009, we considered the entity’s current and projected decreases in revenue to be an impairment indicator and consequently performed a fair value analysis. The resulting impairment of $350,000 was considered to be other-than-temporary and was recognized as a charge to other income.
 
     Property and equipment acquisitions totaled $7.8 million, $2.3 million, and $8.5 million in 2010, 2009 and 2008, respectively. Over the three-year period ended December 31, 2010, our principal property and equipment acquisitions were for manufacturing or engineering development equipment, tooling, leasehold improvements and the acquisition of computer systems and software applications. Payments for intangible assets, including patents and capitalized software, amounted to $1.3 million, $1.7 million and $2.4 million in 2010, 2009, and 2008, respectively.
 
34
 

 

     Proceeds from the exercise of stock options provided cash of $6.4 million, $1.6 million and $3.2 million in 2010, 2009 and 2008, respectively. During 2010, we used cash of $2.1 million for the repurchase of vested stock options. The excess tax benefit from the exercise of stock options was $2.5 million for the year ended December 31, 2010. Financing activity included the repurchase of 1,089,575 shares of common stock for $19.1 million during the year ended December 31, 2008. We did not repurchase any common stock during the years ended December 31, 2010 and 2009. As of December 31, 2010, we had authorization to repurchase approximately $10.9 million of common stock.
 
     For 2011, we expect to use our cash as follows;
     Our total current assets amounted to $84.2 million at December 31, 2010, most of which consisted of cash and cash equivalents, investments, accounts receivable, and inventories. Total current liabilities amounted to $26.0 million and we have no debt. We estimate that we will spend between approximately $9.0 million and $13.0 million in 2011 for property and equipment. We also estimate that as of December 31, 2010, we had approximately $22.5 million of purchase commitments for inventory from selected vendors. In addition to purchase commitments for inventory, we have future commitments for leased facilities. We intend to finance our purchase commitments from existing cash or from cash flows from operations. The future contractual cash obligations related to these commitments are as follows:
 
Year ending December 31,       Facilities       Inventory       Total
2011   $ 544   $ 22,500   $ 23,044
2012     211     -     211
2013     65     -     65
2014     1     -     1
    $        820   $        22,500   $        23,320
 

     We have no contractual obligations beyond 2014. In addition to the above disclosed contractual obligations, the reserve for tax contingencies was $1.4 million at December 31, 2010. Based on the uncertainties associated with the settlement of these items, we are unable to make reasonably reliable estimates of the period of potential settlements, if any, with taxing authorities.
 
Inflation
 
     We believe that inflation has not had a material effect on our operations or on our financial condition during the three most recent fiscal years.
 
35
 

 

Foreign Currency Transactions
 
     We invoice sales to certain European distributors in Euros and reported results are therefore subject to fluctuations in the exchange rates of that currency in relation to the United States dollar. Our strategy is to hedge most of our Euro-denominated accounts receivable positions by entering into 30-day foreign currency forward contracts on a month-to-month basis to reduce the risk that our earnings will be adversely affected by changes in currency exchange rates. We do not use derivative financial instruments for speculative or trading purposes. We enter into 30-day foreign currency forward contracts on the last day of each month and therefore the notional value of the contract equals the fair value at the end of the reporting period. As such, there is no related asset or liability or unrealized gains or losses recorded on the Balance Sheet as of the end of the period. All realized gains and losses related to hedging activities are recorded in current period earnings under the Statement of Operations caption “Foreign currency transaction losses, net”.
 
     We hedged between €2.3 million and €4.5 million during the year ended December 31, 2010, between €2.8 million and €5.0 million during the year ended December 31, 2009 and between €2.5 million and €5.1 million during the year ended December 31, 2008 related to accounts receivable that were denominated in Euros. The foreign currency forward contracts resulted in a currency gain of approximately $340,000 for the year ended December 31, 2010, a loss of $115,000 for the year ended December 31, 2009 and a gain of $235,000 for the year ended December 31, 2008.
 
     We will continue to monitor exposure to currency fluctuations. Instruments that may be used to hedge future risks may include foreign currency forward, swap, and option contracts. These instruments may be used to selectively manage risks, but there can be no assurance that we will be fully protected against material foreign currency fluctuations.
 
Critical Accounting Policies
 
     We have prepared our consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America. This has required us to make estimates, judgments, and assumptions that affected the amounts we reported. Note 1 of the Notes to Consolidated Financial Statements contains the significant accounting principles that we used to prepare our consolidated financial statements.
 
     We have identified several critical accounting policies that required us to make assumptions about matters that were uncertain at the time of our estimates. Had we used different estimates and assumptions, the amounts we recorded could have been significantly different. Additionally, if we had used different assumptions or different conditions existed, our financial condition or results of operations could have been materially different. The critical accounting policies that were affected by the estimates, assumptions, and judgments used in the preparation of our consolidated financial statements are listed below.
 
Revenue Recognition
 
     We derive revenue from sales of 3D printing, rapid prototyping (“RP”) and direct digital manufacturing (“DDM”) systems, consumables, and services. We recognize revenue when (1) persuasive evidence of a final agreement exists, (2) delivery has occurred or services have been rendered, (3) the selling price is fixed or determinable, and (4) collectibility is reasonably assured. Our standard terms are FOB shipping point, and, as such, most of the revenue from the sale of RP machines and consumables is recognized when shipped. Exceptions to this policy occur if a customer’s purchase order indicates an alternative term or provides that the equipment sold would be subject to certain contingencies, such as formal acceptance. In these instances, revenues would be recognized only upon satisfying the conditions established by the customer as contained in its purchase order to us. Revenue from sales-type leases for our high-performance systems is recognized at the time of lessee acceptance, which follows installation. Revenue from sales-type leases for our Dimension systems is recognized at the time of shipment, since either the customer or the reseller performs the installation. We recognize revenue from sales-type leases at the net present value of future lease payments. Revenue from operating leases is recognized ratably over the lease period.
 
     Service revenue is derived from sales of maintenance contracts, installation services, and training. Service revenue from maintenance contracts is recognized ratably over the term of the contract, typically one to two years. We offer warranty periods ranging from 90 days to one year. On certain sales that require a one-year warranty, the extended warranty is treated for revenue recognition purposes as a maintenance agreement. The fair value of this maintenance agreement is deferred and recognized ratably over the period of the extended warranty as an implied maintenance contract. Installation service revenues are recognized upon completion of the installation. Training revenues are recognized upon completion of the training.
 
36
 

 

     In accordance with ASC 605, Revenue Recognition, when two or more product offerings are contained in a single arrangement, revenue is allocated between the elements based on their relative fair value, provided that each element meets the criteria for treatment as a separate unit of accounting. An item is considered a separate unit of accounting if it has value to the customer on a stand-alone basis and there is objective and reliable evidence of the fair value of the undelivered items. Fair value is generally determined based upon the price charged when the element is sold separately. In the absence of fair value for a delivered element, revenue is allocated first to the fair value of the undelivered elements and then the residual revenue is allocated to the delivered elements. In the absence of fair value for an undelivered element, the arrangement is accounted for as a single unit of accounting, resulting in a delay of revenue recognition for the delivered elements until all undelivered elements have been fulfilled.
 
     Revenues from training and installation are unbundled and are recognized after the services have been performed. Most of our products are sold through distribution channels, with training and installation services offered by the resellers. We do not offer installation or training for the Dimension product. The equipment manufactured and sold by us is subject to factory testing that replicates the conditions under which the customers intend to use the equipment. All of the systems are sold subject to published specifications, and all systems sales involve standard models.
 
     We assess collectibility as part of the revenue recognition process. This assessment includes a number of factors such as an evaluation of the creditworthiness of the customer, past payment history, and current economic conditions. If it is determined that collectibility cannot be reasonably assured, we will decline shipment, request a down payment, or defer recognition of revenue until ultimate collectibility is reasonably assured.
 
     We also record a provision for estimated product returns and allowances in the period in which the related revenue is recorded. This provision against current gross revenue is based principally on historical rates of sales returns, but also factors in changes in the customer base, geographic economic conditions, and changes in the financial conditions of the Company’s customers. There was no provision for product returns and allowances at December 31, 2010 or 2009.
 
Stock-Based Compensation
 
     We calculate the fair value of stock-based option awards on the date of grant using the Black-Scholes option pricing model. The computation of expected volatility is based on historical volatility from traded options on our stock. The expected option term is calculated in accordance with ASC 718, Compensation – Stock Compensation. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury yield curve in effect at the time of grant. Each of the three factors requires us to use judgment and make estimates in determining the percentages and time periods used for the calculation. If we were to use different percentages or time periods, the fair value of stock-based option awards could be materially different.
 
Allowance for Doubtful Accounts
 
     While we evaluate the collectibility of a sale as part of our revenue recognition process, we must also make judgments regarding the ultimate realization of our accounts receivable. A considerable amount of judgment is required in assessing the realization of these receivables, including the aging of the receivables and the creditworthiness of each customer. We may not be able to accurately and timely predict changes to a customer’s financial condition. If a customer’s financial condition should suddenly deteriorate, calling into question our ability to collect the receivable, our estimates of the realization of our receivables could be adversely affected. We might then have to record additional allowances for doubtful accounts, which could have an adverse effect on our results of operations in the period affected.
 
     Our allowance for doubtful accounts is adjusted quarterly using two methods. First, our overall reserves are based on a percentage applied to certain aged receivable categories that are predominately based on historical bad debt write-off experience. Then, we make an additional evaluation of overdue customer accounts, for which we specifically reserve. In our evaluation we use a variety of factors, such as past payment history, the current financial condition of the customer, and current economic conditions. We also evaluate our overall concentration risk, which assesses the total amount owed by each customer, regardless of its current status. As of December 31, 2010 and 2009, our allowance for doubtful accounts amounted to $1.1 and $0.9 million, respectively.
 
37
 

 

Inventories
 
     Our inventories are recorded at the lower of cost or market, with cost based on a first-in, first-out basis. We periodically assess this inventory for obsolescence and potential excess by reducing the difference between our cost and the estimated market value of the inventory based on assumptions about future demand and historical sales patterns. Our inventories consist of materials and products that are subject to technological obsolescence and competitive market conditions. If market conditions or future demand are less favorable than our current expectations, additional inventory write downs or reserves may be required, which could have an adverse effect on our reported results in the period the adjustments are made. Additionally, engineering or field change orders (“ECO” and “FCO”, respectively) introduced by our engineering group could suddenly create extensive obsolete and/or excess inventory. Although our engineering group considers the estimated effect that an ECO or FCO would have on our inventories, a mandated ECO or FCO could have an immediate adverse affect on our reported financial condition if it required the use of different materials in either new production or our service inventory.
 
     Some of our inventory is returned to us by our customers and refurbished. This refurbished inventory, once fully repaired and tested, is functionally equivalent to new production and is utilized to satisfy many of our requirements under our warranty and service contracts. Upon receipt of the returned material, this inventory is recorded at a discount from original cost, and further reduced by estimated future refurbishment expense. While we evaluate this service material in the same way as our stock inventory (i.e., we periodically test for obsolescence and excess), this inventory is subject to changing demand that may not be immediately apparent. Adjustments to this service inventory, following an obsolescence or excess review, could have an adverse effect on our reported financial condition in the period when the adjustments are made. We review the requirements for service inventory for discontinued products using the number of active maintenance contracts per product line as the key determinant for inventory levels and composition. A sudden decline in the number of customers renewing service agreements in a particular period could lead to an unanticipated write down of this service inventory for a particular product line.
 
Intangible Assets
 
     Intangible assets are capitalized and amortized over their estimated useful or economic lives using the straight-line method in conformity with ASC 350, Intangibles – Goodwill and Other, as follows:
 
          RP technology 11 years
  Capitalized software development costs 3 years
  Patents 10 years
  Trademarks 5 years

     The costs of software development, including significant product enhancements, incurred subsequent to establishing technological feasibility have been capitalized in accordance with ASC 985-20, Costs of Software to be Sold, Leased or Marketed. Costs incurred prior to establishment of technological feasibility are charged to research and development expense.
 
Income Taxes
 
     We comply with ASC 740, Income Taxes, which requires an asset and liability approach to financial reporting of income taxes. Deferred income tax assets and liabilities are computed for differences between the financial statement and tax basis of assets and liabilities that will result in taxable or deductible amounts in the future, based on enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established, when necessary, to reduce the deferred income tax assets to the amount expected to be realized.
 
     In accordance with ASC 740, Income Taxes, we take a two-step approach to recognizing and measuring uncertain tax positions (tax contingencies). The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount which is more than 50% likely of being realized upon ultimate settlement. We reevaluate these tax positions quarterly and make adjustments as required.
 
38
 

 

Impairment of Long-Lived Assets
 
     We adhere to ASC 360, Property, Plant, and Equipment, and annually assess the recoverability of the carrying amounts of long-lived assets, including intangible assets, at year-end. An impairment loss would be recognized if expected undiscounted future cash flows are less than the carrying amount of the asset. This loss would be determined by calculating the difference by which the carrying amount of the asset exceeds its fair value. Based on our assessment as of December 31, 2010 and 2009, no long-lived assets were determined to be impaired.
 
Recently Issued Accounting Pronouncements
 
     In January 2010, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2010-6, Improving Disclosures About Fair Value Measurements, that amends existing disclosure requirements under FASB Accounting Standards Codification™ (“ASC”) 820 by adding required disclosures about items transferring into and out of levels 1 and 2 in the fair value hierarchy; adding separate disclosures about purchases, sales, issuances, and settlements relative to level 3 measurements; and clarifying, among other things, the existing fair value disclosures about the level of disaggregation. This ASU is effective for interim and annual reporting periods beginning after December 15, 2009, except for Level 3 reconciliation disclosures, which are effective for interim and annual periods beginning after December 15, 2010. Additional disclosures required by this standard for 2010 are included in Note 10 of the Notes to Consolidated Financial Statements. Since this standard impacts disclosure requirements only, the adoption of this standard did not have an impact on our consolidated results of operations or financial condition.
 
     In July 2010, the FASB issued ASU 2010-20, Disclosures about the Credit Quality of Financing Receivables and the Allowance for Credit Losses, which amends Accounting Standards Codification Topic 310, Receivables. The purpose of the Update is to improve transparency by companies that hold financing receivables, including loans, leases and other long-term receivables. The Update requires such companies to disclose more information about the credit quality of their financing receivables and the credit reserves against them. ASU 2010-20 requires further disaggregated disclosures that improve financial statement users’ understanding of (1) the nature of an entity’s credit risk associated with its financing receivables and (2) the entity’s assessment of the risk in estimating its allowance for credit losses as well as changes in the allowance and the reasons for those changes. The new and amended disclosures as of the end of a reporting period were effective for interim and annual reporting periods ending on or after December 15, 2010. This Update does not have a material impact on our consolidated results of operations and financial condition.
 
Forward-looking Statements and Factors That May Affect Future Results of Operations
 
     All statements herein that are not historical facts or that include such words as “expects”, “anticipates”, “projects”, “estimates”, “vision”, “planning”, “could”, “potential”, “plan”, “believes”, “desires”, “intends” or similar words constitute forward-looking statements that we deem to be covered by and to qualify for the safe harbor protection covered by the Private Securities Litigation Reform Act of 1995 (the “1995 Act”). Investors and prospective investors in our Company should understand that several factors govern whether any forward-looking statement herein will be or can be achieved. Any one of these factors could cause actual results to differ materially from those projected herein.
 
39
 

 

     These forward-looking statements include the expected increases in net sales of RP, DDM, and 3D printing systems, services and consumables, and our ability to maintain our gross margins on these sales. The forward-looking statements include projected revenue and income in future quarters; the size of the 3D printing market; our objectives for the marketing and sale of our DimensionTM 3D printers and our FortusTM 3D Production Systems, particularly for use in direct digital manufacturing (DDM); the demand for our proprietary consumables; the expansion of our RedEye paid parts service; and our beliefs with respect to the growth in the demand for our products and the impact of our OEM Agreement on sales of our products. They include our plans and objectives to introduce new products, to control expenses, to improve the quality and reliability of our systems, to respond to new or existing competitive products, and to improve profitability. The forward-looking statements included herein are based on current expectations that involve a number of risks and uncertainties, some of which are described in Item 1A, “Risk Factors” above. These forward-looking statements are based on assumptions, among others, that we will be able to:
     Assumptions relating to the foregoing involve judgments with respect to, among other things, future economic, geo-political, competitive, market and technological conditions, and future business decisions, all of which are difficult or impossible to predict accurately and many of which are beyond our control. Although we believe that the assumptions underlying the forward-looking statements contained herein are reasonable, any of those assumptions could prove inaccurate, and therefore there is and can be no assurance that the results contemplated in any such forward-looking statement will be realized. The impact of actual experience and business developments may cause us to alter our marketing plans, our capital expenditure budgets, or our engineering, selling, manufacturing or other budgets, which may in turn affect our results of operations or the success of our new product development and introduction. We may not be able to alter our plans or budgets in a timely manner, resulting in reduced profitability or losses.
 
     Due to the factors noted above and elsewhere in this Management’s Discussion and Analysis of Financial Condition and Results of Operations, our future earnings and stock price may be subject to significant volatility, particularly on a quarterly basis. Additionally, we may not learn of revenue or earnings shortfalls until late in a fiscal quarter, since we frequently receive a significant number of orders very late in a quarter. This could result in an immediate and adverse effect on the trading price of our common stock. Past financial performance should not be considered a reliable indicator of future performance, and investors should not use historical trends to anticipate results or trends in future periods.
 
Item 7A. Quantitative and Qualitative Disclosures About Market Risk.
 
Interest Rate Risk
 
     Our cash and cash equivalent investments are held exclusively in short-term money market and sweep instruments with maturities of less than 90 days. These are subject to limited interest rate risk. A 10% change in interest rates would not have a material effect on our financial condition or results of operations. Our short- and long-term investments are invested in auction rate securities, corporate and municipal bonds and certificates of deposit that bear interest at rates of 0.5% to 6.4%. An immediate 10% change in interest rates would have no material effect on our financial condition or results of operations. 
 
40
 

 

Foreign Currency Exchange Rate Risk
 
     We have not historically hedged sales from or expenses incurred by our European operations that have a functional currency in Euros. Therefore, a hypothetical 10% change in the exchange rates between the U.S. dollar and the Euro could increase or decrease our income before taxes by less than $0.4 million for the continued maintenance of our European facility. We hedged between €2.3 million and €4.5 million during the year ended December 31, 2010 and between €2.8 million and €5.0 million during the year ended December 31, 2009 of accounts receivable denominated in Euros. A hypothetical 10% change in the exchange rates between the US dollar and the Euro could increase or decrease income before taxes by between $0.5 million and $1.1 million.
 
Item 8. Financial Statements and Supplementary Data.
 
     This information appears following Item 15 of this report and is incorporated herein by reference.
 
Item 9. Changes In and Disagreements With Accountants on Accounting and Financial Disclosure.
 
     None.
 
Item 9A. Controls and Procedures.
 
Disclosure Controls and Procedures
 
     Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this report (the “Evaluation Date”). Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded as of the Evaluation Date that our disclosure controls and procedures were effective. Disclosure controls and procedures require that the information relating to us required to be disclosed in our Securities and Exchange Commission (“SEC”) reports (i) is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms, and (ii) is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
 
Internal Control over Financial Reporting
 
     Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we are responsible for establishing and maintaining an effective system of internal control over financial reporting (as defined in Rule 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934). Our management has conducted an assessment of our internal control over financial reporting based on the framework established by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control – Integrated Framework. Our management has prepared an annual report on internal control over financial reporting. Management’s report is included in this Annual Report on Form 10-K on page F-3. In addition, Grant Thornton, LLP, our independent registered public accounting firm, has prepared its report on the effectiveness of our internal control over financial reporting and such report is included on pages F-5 to F-6 of the consolidated financial statements.
 
Changes in Internal Control over Financial Reporting
 
     There have not been any changes in our internal control over financial reporting identified in connection with the assessment that occurred during the fourth quarter of 2010 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
 
Item 9B. Other Information.
 
     None.
 
41
 

 

PART III
 
Item 10. Directors, Executive Officers and Corporate Governance.
 
     We have adopted a Code of Business Conduct and Ethics for all directors, officers and employees, which is filed as Exhibit 14.1 to our Annual Report on Form 10-K for the year ended December 31, 2008.  The Code of Business Conduct and Ethics is available on the SECs website at http://www.sec.gov.  We intend to disclose on our website, http://www.stratasys.com, any amendment to, or waiver of, the Code of Business Conduct and Ethics related to our senior officers.
 
     The additional required information is incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held April 28, 2011.
 
Item 11. Executive Compensation.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held April 28, 2011.
 
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held April 28, 2011.
 
Item 13. Certain Relationships and Related Transactions, and Director Independence.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held April 28, 2011.
 
Item 14. Principal Accountant Fees and Services.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held April 28, 2011.
 
42
 

 

PART IV
 
Item 15. Exhibits and Financial Statement Schedules.
 
(a) Documents
 
        1.  Financial Statements --        
           
            Management’s Report on Internal Control Over Financial Reporting   F-3
           
      Reports of Independent Registered Public Accounting Firm   F-4 to F-6
           
      Consolidated Balance Sheets December 31, 2010 and 2009   F-7
      Consolidated Statements of Operations Years Ended December 31, 2010, 2009 and 2008   F-8
      Consolidated Statements of Changes in Stockholders’ Equity and Comprehensive Income Years Ended December 31, 2010, 2009 and 2008   F-9
      Consolidated Statements of Cash Flows Years Ended December 31, 2010, 2009 and 2008   F-10
      Notes to Consolidated Financial Statements   F-11 to F-32
           
  2. Financial Statement Schedule --    
           
      Schedule II -- Valuation and Qualifying Accounts and Reserves   F-33

43
 

 

STRATASYS, INC. AND SUBSIDIARIES
 
CONSOLIDATED FINANCIAL STATEMENTS
AND
REPORTS OF INDEPENDENT REGISTERED
PUBLIC ACCOUNTING FIRM
 
DECEMBER 31, 2010, 2009 AND 2008 
 
F-1
 

 

CONTENTS
 
Management’s Report on Internal Controls over Financial Reporting       F-3
     
Reports of Independent Registered Public Accounting Firm   F-4-F-6
     
Consolidated Financial Statements    
     
       Consolidated Balance Sheets   F-7
     
       Consolidated Statements of Operations   F-8
     
       Consolidated Statements of Changes in Stockholders' Equity and Comprehensive Income   F-9
     
       Consolidated Statements of Cash Flows   F-10
     
       Notes to Consolidated Financial Statements   F-11-F-32
     
Schedule II - Valuation and Qualifying Accounts and Reserves   F-33

F-2
 

 

MANAGEMENT’S RESPONSIBILITY FOR FINANCIAL REPORTING
 
     Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting (as such term is defined in Rule 13a-15(f) under the Securities Exchange Act of 1934). The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with accounting principles generally accepted in the United States, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.
 
     Internal control over financial reporting is designed to provide reasonable assurance to the Company’s management and board of directors regarding the preparation of reliable financial statements for external purposes in accordance with accounting principles generally accepted in the United States. Internal control over financial reporting includes self-monitoring mechanisms and actions taken to correct deficiencies as they are identified. Because of the inherent limitations in any internal control, no matter how well designed, misstatements may occur and not be prevented or detected. Accordingly, even effective internal control over financial reporting can provide only reasonable assurance with respect to financial statement preparation. Further, the evaluation of the effectiveness of internal control over financial reporting was made as of a specific date, and continued effectiveness in future periods is subject to the risks that controls may become inadequate because of changes in conditions or that the degree of compliance with the policies and procedures may decline.
 
MANAGEMENT’S REPORT ON INTERNAL CONTROLS OVER FINANCIAL REPORTING
 
     Management conducted an evaluation of the effectiveness of the Company’s system of internal control over financial reporting as of December 31, 2010 based on the framework set forth in “Internal Control — Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on its evaluation, management concluded that, as of December 31, 2010, the Company’s internal control over financial reporting was effective.
 
/s/ S. SCOTT CRUMP
S. Scott Crump
Chief Executive Officer

/s/ ROBERT F. GALLAGHER
Robert F. Gallagher
Chief Financial Officer

Date: March 8, 2011
 
F-3
 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
Board of Directors and Shareholders
Stratasys, Inc.
 
We have audited the accompanying consolidated balance sheets of Stratasys, Inc. (a Delaware Corporation) and subsidiaries (collectively, the “Company”) as of December 31, 2010 and 2009, and the related consolidated statements of operations, stockholders’ equity and comprehensive income, and cash flows for each of the three years in the period ended December 31, 2010. Our audits of the basic financial statements included the financial statement schedule listed in the index appearing under Item 15. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and financial schedule based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
 
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Stratasys, Inc. and subsidiaries as of December 31, 2010 and 2009, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2010 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Stratasys, Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) and our report dated March 8, 2011 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.
 
  /s/ GRANT THORNTON LLP  
     
Minneapolis, Minnesota     
March 8, 2011    

F-4
 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
Board of Directors and Shareholders
Stratasys, Inc.
 
We have audited Stratasys, Inc. (a Delaware Corporation) and subsidiaries’ (collectively, the “Company”) internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on Stratasys, Inc.’s internal control over financial reporting based on our audit.
 
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
 
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
In our opinion, Stratasys, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control – Integrated Framework issued by COSO.
 
F-5
 

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Stratasys, Inc. and subsidiaries as of December 31, 2010 and 2009, and the related consolidated statements of operations, changes in stockholders’ equity and comprehensive income, and cash flows for each of the three years in the period ended December 31, 2010, and our report dated March 8, 2011 expressed an unqualified opinion on those financial statements.
 
  /s/ GRANT THORNTON LLP  
     
Minneapolis, Minnesota     
March 8, 2011    

F-6
 

 

STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Consolidated Balance Sheets                
                 
December 31,       2010       2009
ASSETS                
Current assets                
       Cash and cash equivalents   $      27,554,411     $      48,315,926  
       Short-term investments - held to maturity     8,797,878       16,073,718  
       Accounts receivable, less allowance for doubtful                
                     accounts of $1,094,588 at December 31, 2010                
                     and $903,101 at December 31, 2009     20,051,451       19,249,813  
       Inventories     17,880,714       14,608,014  
       Net investment in sales-type leases, less allowance                
                     for doubtful accounts of $189,338 at December 31,                
                     2010 and $222,011 at December 31, 2009     3,096,911       3,618,876  
       Prepaid expenses and other current assets     3,384,394       2,247,612  
       Deferred income taxes     3,447,000       2,277,000  
              Total current assets     84,212,759       106,390,959  
Property and equipment, net     29,872,945       26,326,012  
Other assets                
       Intangible assets, net     6,405,714       7,653,269  
       Net investment in sales-type leases     3,067,446       3,477,039  
       Deferred income taxes     -       688,000  
       Long-term investments - available for sale     1,185,250       1,055,750  
       Long-term investments - held to maturity     52,504,650       5,467,318  
       Other non-current assets     1,210,867       2,078,165  
              Total other assets     64,373,927       20,419,541  
Total assets   $ 178,459,631     $ 153,136,512  
                 
LIABILITIES AND STOCKHOLDERS' EQUITY                
Current liabilities                
       Accounts payable and other current liabilities   $ 14,408,628     $ 12,874,798  
       Unearned revenues     11,561,521       10,678,427  
              Total current liabilities     25,970,149       23,553,225  
Non-current liabilities                
       Deferred tax liabilities     207,000       -  
Total liabilities     26,177,149       23,553,225  
Commitments and contingencies                
Stockholders' equity                
       Common stock, $.01 par value, authorized 30,000,000 shares;                
                     26,509,518 and 26,053,318 shares issued as of December 31,                
                     2010 and 2009, respectively     265,095       260,533  
       Capital in excess of par value     107,781,990       94,329,398  
       Retained earnings     83,385,484       74,015,940  
       Accumulated other comprehensive loss     (145,662 )     (18,159 )
       Treasury stock at cost, 5,687,631 shares as of                
                     December 31, 2010 and 2009     (39,004,425 )     (39,004,425 )
              Total stockholders' equity     152,282,482       129,583,287  
Total liabilities and stockholders' equity   $ 178,459,631     $ 153,136,512  
                 
See accompanying notes to consolidated financial statements.
 
F-7
 

 

STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Consolidated Statements of Operations                        
                         
Years Ended December 31,       2010       2009       2008
Net sales                        
       Products   $      96,722,415     $      73,210,550     $      98,969,152  
       Services     25,364,673       25,145,682       25,525,860  
       Fair value of warrant related to OEM agreement     (4,987,806 )     -       -  
      117,099,282       98,356,232       124,495,012  
                         
Cost of sales                        
       Products     49,613,957       40,925,443       47,672,443  
       Services     11,399,356       11,047,217       10,410,249  
      61,013,313       51,972,660       58,082,692  
                         
Gross profit     56,085,969       46,383,572       66,412,320  
                         
Operating expenses                        
       Research and development     9,755,169       7,737,125       8,973,203  
       Selling, general and administrative     32,863,462       32,822,727       36,842,665  
      42,618,631       40,559,852       45,815,868  
                         
Operating income     13,467,338       5,823,720       20,596,452  
                         
Other income (expense)                        
       Interest income, net     921,088       989,922       2,037,257  
       Foreign currency transaction losses, net     (617,174 )     (232,767 )     (834,762 )
       Other, net     64,086       (398,603 )     (1,065,460 )
      368,000       358,552       137,035  
                         
Income before income taxes     13,835,338       6,182,272       20,733,487  
       Income taxes     4,465,794       2,066,001       7,118,000  
                         
Net income   $ 9,369,544     $ 4,116,271     $ 13,615,487  
                         
Net income per common share                        
       Basic   $ 0.46     $ 0.20     $ 0.66  
       Diluted     0.44       0.20       0.65  
                         
Weighted average commons shares outstanding                        
       Basic     20,579,412       20,235,747       20,676,436  
       Diluted     21,129,533       20,267,999       21,079,265  

See accompanying notes to consolidated financial statements.
 
F-8
 

 

STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Stratasys, Inc. and Subsidiaries
Consolidated Statements of Changes in Stockholders' Equity and Comprehensive Income
 
Years Ended December 31, 2010, 2009, and 2008                                                    
                            Accumulated                        
                            Other                        
              Capital in         Comprehensive           Total        
    Common Stock   Excess of   Retained   Income   Treasury   Stockholders'   Comprehensive
      Shares     Amount     Par Value     Earnings     (Loss)     Stock     Equity     Income
Balances, January 1, 2008   25,610,654   $      256,108   $      87,023,541     $      56,284,182   $          172,073     $      (19,902,375 )   $      123,833,529          
Exercise of stock options and warrants   298,949     2,988     3,224,060                             3,227,048          
Income tax reductions relating to                                                        
       exercise of stock options               41,881                             41,881          
Purchase of 1,087,575 shares of treasury stock                                     (19,102,050 )     (19,102,050 )        
Stock based compensation               1,321,596                             1,321,596          
Net income                       13,615,487                     13,615,487     $      13,615,487  
Other comprehensive income (expense),                                                        
       unrealized loss on securities                             (128,000 )             (128,000 )     (128,000 )
       foreign currency translation adjustment                             (247,092 )             (247,092 )     (247,092 )
                                                         
Total comprehensive income                                                   $ 13,240,395  
Balances, December 31, 2008   25,909,603     259,096     91,611,078       69,899,669     (203,019 )     (39,004,425 )     122,562,399          
                                                         
Exercise of stock options and warrants   143,715     1,437     1,664,061                             1,665,498          
Tax benefit shortfall relating to                                                        
       exercise of stock options               (82,811 )                           (82,811 )        
Stock based compensation               1,137,070                             1,137,070          
Net income                       4,116,271                     4,116,271     $ 4,116,271  
Other comprehensive income,                                                        
       unrealized loss on securities adjustment                             26,500               26,500       26,500  
       foreign currency translation adjustment                             158,360               158,360       158,360  
                                                         
Total comprehensive income                                                   $ 4,301,131  
Balances, December 31, 2009   26,053,318     260,533     94,329,398       74,015,940     (18,159 )     (39,004,425 )     129,583,287          
                                                         
Exercise of stock options and warrants   456,200     4,562     6,397,803                             6,402,365          
Income tax reductions relating to                                                        
       exercise of stock options               2,961,412                             2,961,412          
Vested stock option repurchase               (2,136,605 )                           (2,136,605 )        
Stock based compensation               1,242,176                             1,242,176          
Fair value of warrant related to OEM agreement               4,987,806                             4,987,806          
Net income                       9,369,544                     9,369,544     $ 9,369,544  
Other comprehensive income (expense),                                                        
       unrealized gain on securities adjustment                             101,500               101,500       101,500  
       foreign currency translation adjustment                             (229,003 )             (229,003 )     (229,003 )
                                                         
Total comprehensive income                                                   $ 9,242,041  
Balances, December 31, 2010   26,509,518   $ 265,095   $ 107,781,990     $ 83,385,484   $ (145,662 )   $ (39,004,425 )   $ 152,282,482          
                                                         
See accompanying notes to consolidated financial statements.
 
F-9
 

 

STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Consolidated Statements of Cash Flows
 
Years ended December 31,       2010       2009       2008
Cash flows from operating activities                        
       Net income   $ 9,369,544     $ 4,116,271     $ 13,615,487  
       Adjustments to reconcile net income to                        
                     net cash from operating activities:                        
       Deferred income taxes     (328,000 )     (1,431,000 )     (51,000 )
       Depreciation     6,360,290       5,827,113       4,810,237  
       Amortization     2,982,100       2,428,540       2,193,609  
       Stock-based compensation     1,242,176       1,137,070       1,321,597  
       Fair value of warrant related to OEM agreement
    4,987,806                  
       Loss (gain) on disposal of property and equipment     -       314,414       (61,784 )
       Loss on impairment of investment     -       444,000       1,270,750  
                         
       Increase (decrease) in cash attributable to changes in                        
                     operating assets and liabilities:                        
             Accounts receivable, net     (801,638 )     7,289,920       (233,037 )
             Inventories     (5,367,062 )     4,810,441       (6,875,415 )
             Net investment in sales-type leases     931,558       1,320,534       (1,057,814 )
             Prepaid expenses     (1,136,782 )     360,468       (100,764 )
             Other assets     867,298       (119,951 )     (964 )
             Accounts payable and other current liabilities     4,495,241       1,079,560       (2,121,903 )
             Unearned revenues     883,094       (2,086,969 )     1,800,925  
             Excess tax benefit from stock options     (2,514,551 )     -       (18,747 )
Net cash provided by operating activities     21,971,074       25,490,411       14,491,177  
                         
Cash flows from investing activities                        
          Proceeds from sale of investments     27,728,403       7,022,607       23,875,909  
          Purchase of investments     (67,911,812 )     (9,920,000 )     -  
          Proceeds from sale of property and equipment     -       38,445       315,726  
          Acquisition of property and equipment     (7,822,873 )     (2,284,676 )     (8,494,145 )
          Acquisition of intangible and other assets     (1,287,627 )     (1,687,126 )     (2,407,221 )
Net cash provided by (used in) investing activities     (49,293,909 )     (6,830,750 )     13,290,269  
                         
Cash flows from financing activities                        
          Proceeds from exercise of stock options and warrants
    6,402,365       1,582,687       3,229,259  
          Cash paid for vested stock option repurchases
    (2,136,605 )     -       -  
          Excess tax benefit from stock options     2,514,551       -       18,747  
          Purchase of treasury stock     -       -       (19,104,261 )
Net cash provided by (used in) financing activities     6,780,311       1,582,687       (15,856,255 )
                         
Effect of exchange rate changes on cash     (218,991 )     127,779       (191,163 )
                         
Net increase (decrease) in cash and cash equivalents     (20,761,515 )     20,370,127       11,734,028  
Cash and cash equivalents, beginning of year     48,315,926       27,945,799       16,211,771  
                         
Cash and cash equivalents, end of year   $ 27,554,411     $ 48,315,926     $ 27,945,799  
                         
       Cash paid for taxes   $      5,026,953     $      626,407     $      8,133,189  
       Transfer of fixed assets to inventory     242,111       245,329       242,701  
       Transfer of inventory to fixed assets     2,336,473       716,225       3,118,720  

See accompanying notes to consolidated financial statements.
 
F-10
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 1. Nature of Operations and Summary of Significant Accounting Policies
 
Nature of Operations
 
Stratasys, Inc. and subsidiaries (collectively the "Company") is a worldwide leading manufacturer of three-dimensional (“3D”) printers and high-performance rapid prototyping (“RP”) systems for the office-based RP and direct digital manufacturing (“DDM”) markets. The Company’s 3D printers and high-performance RP systems provide 3D computer-aided design (“CAD”) users a fast, office-friendly, and low-cost alternative for building functional 3D parts. The Company develops, manufactures and sells a broad product line of 3D printers and DDM systems (and related proprietary consumable materials) that create physical models from CAD designs. It also offers rapid prototyping and production part manufacturing services through its centers located in North America, Europe and Australia.
 
Principles of Consolidation
 
The accompanying consolidated financial statements include the accounts of Stratasys, Inc. and its wholly owned subsidiaries. All intercompany accounts and transactions have been eliminated in consolidation.
 
Use of Estimates
 
Preparing the Company’s financial statements in conformity with accounting principles generally accepted in the United States of America (‘‘GAAP’’) requires management to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
 
Cash and Cash Equivalents
 
The Company considers all highly-liquid debt instruments purchased with maturities of three months or less when acquired to be cash equivalents. At December 31, 2010 and 2009, cash equivalents consisted of money market accounts aggregating approximately $25.9 million and $46.1 million, respectively. As of December 31, 2010 and 2009, and at various times during those years, balances of cash at financial institutions exceeded the federally insured limit. The Company has not experienced any losses in such accounts and believes cash and cash equivalents are not subject to any significant credit risk. At December 31, 2010 and 2009, cash balances held in foreign bank accounts were approximately $0.2 million and $0.3 million, respectively. Cash balances held in foreign accounts are subject to local banking laws and may bear higher or lower risk than cash deposited in the United States.
 
Short-term and Long-term Investments
 
Classification of investments as current or non-current is dependent upon management’s intended holding period, the investment’s maturity date and liquidity considerations based on market conditions. These investments are then evaluated and classified as available-for-sale or held-to-maturity in accordance with the provisions of the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 320, Investments – Debt and Equity Securities. This evaluation takes into consideration the Company’s past history of holding investments until maturity, projected cash flow estimates, future capital requirements, the existence of credit deterioration of the issuer and the Company’s overall investment strategy as established by management and approved by its Board of Directors.
 
If management has the positive intent and ability to hold its debt securities until maturity, they are classified as “held-to-maturity” and accounted for using the amortized-cost method. All other securities are classified as “available-for-sale” and accounted for at fair value with the realized gain or loss, net of tax, reported in current period income and unrealized gain or loss, net of tax, reported in other comprehensive income. The Company does not hold any investments for trading purposes and had no unrecognized gains or losses related to held-to-maturity investments at December 31, 2010 or 2009, as the fair value of those investments approximated cost.
 
F-11
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Fair Value of Financial Instruments
 
The fair value of the Company's assets and liabilities, which qualify as financial instruments under ASC 820, Fair Value Measurements and Disclosures, approximate the carrying amounts presented in the consolidated balance sheets.
 
Accounts Receivable
 
The Company carries its accounts receivable at cost less an allowance for returns and doubtful accounts. A trade receivable is considered to be past due if the receivable balance is outstanding beyond terms identified on the customer’s purchase order and accepted by the Company. On a periodic basis, the Company evaluates its accounts receivable and establishes an allowance for doubtful accounts based on past write-offs and collections and current credit conditions. The Company evaluates a number of factors to assess collectibility, including an evaluation of the creditworthiness of the customer, past due amounts, payment history, and current economic conditions. It is reasonably possible that the Company’s estimate of the allowance for doubtful accounts will change. Accounts are written-off against the reserve when management deems the accounts are no longer collectible. The Company also records a provision for estimated product returns and allowances in the period in which the related revenue is recorded. This provision against current gross revenue is based principally on historical rates of sales returns, but also factors in changes in the customer base, geographic economic conditions, and changes in the financial conditions of the Company’s customers.
 
Inventories
 
Inventories are stated at the lower of cost or market, with cost determined on a first-in, first-out basis. Inventory costs consist of material, direct labor and overhead. The Company periodically assesses inventory for obsolescence and excess and reduces the carrying value by an amount equal to the difference between its cost and the estimated market value based on assumptions about future demand and historical sales patterns.
 
Impairment of Long-Lived Assets
 
The Company annually assesses the recoverability of the carrying amounts of long-lived assets, including intangible assets, at year-end. An impairment loss would be recognized if expected undiscounted future cash flows are less than the carrying amount of the asset. This loss would be determined by calculating the difference by which the carrying amount of the asset exceeds its fair value. Based on the Company’s assessment as of December 31, 2010 and 2009, no long-lived assets were determined to be impaired.
 
Property and Equipment
 
Property and equipment is stated at cost less accumulated depreciation and amortization. Depreciation and amortization are computed using the straight-line method over the estimated useful lives of the assets ranging from two to 30 years. The Company recorded depreciation expense not included in cost of sales of approximately $2.7 million, $2.0 million, and $1.7 million for the years ended December 31, 2010, 2009, and 2008, respectively. Maintenance and repairs are charged to operations, while betterments and improvements are capitalized.
 
Intangible Assets
 
Intangible assets are capitalized and amortized over their estimated useful or economic lives using the straight-line method in conformity with ASC 350, Intangibles – Goodwill and Other, as follows:
 
  RP technology 11 years
  Capitalized software development costs 3 years
  Patents 10 years
  Trademarks 5 years

F-12
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The costs of software development, including significant product enhancements, incurred subsequent to establishing technological feasibility have been capitalized in accordance with ASC 985-20, Costs of Software to be Sold, Leased or Marketed. Costs incurred prior to establishment of technological feasibility are charged to research and development expense.
 
Unearned Revenues
 
The Company services and supports customers by providing warranties and selling maintenance agreements for its products. Unearned revenues are comprised of purchased and implied maintenance agreements covering future periods. Implied maintenance is the portion of revenue received at the time of a system sale that represents maintenance coverage commitments that were included in the sale that extend beyond the stated warranty period. Maintenance revenue is recognized in equal installments over the period of the agreement. Purchased maintenance is deferred in whole and amortized over the period of coverage ranging from one to five years.
 
Revenue Recognition
 
The Company derives revenue from sales of 3D printing, rapid prototyping (“RP”) and direct digital manufacturing (“DDM”) systems, consumables, and services. The Company recognizes revenue when (1) persuasive evidence of a final agreement exists, (2) delivery has occurred or services have been rendered, (3) the selling price is fixed or determinable, and (4) collectibility is reasonably assured. The Company’s standard terms are FOB shipping point, and, as such, most of the revenue from the sale of RP machines and consumables is recognized when shipped. Exceptions to this policy occur if a customer’s purchase order indicates an alternative term or provides that the equipment sold would be subject to certain contingencies, such as formal acceptance. In these instances, revenues would be recognized only upon satisfying the conditions established by the customer as contained in its purchase order to the Company. Revenue from sales-type leases for the Company’s high-performance systems is recognized at the time of lessee acceptance, which follows installation. Revenue from sales-type leases for the Company’s Dimension systems is recognized at the time of shipment, since either the customer or the reseller performs the installation. The Company recognizes revenue from sales-type leases at the net present value of future lease payments. Revenue from operating leases is recognized ratably over the lease period.
 
Service revenue is derived from sales of maintenance contracts, installation services, and training. Service revenue from maintenance contracts is recognized ratably over the term of the contract, typically one to two years. The Company offers warranty periods ranging from 90 days to one year. On certain sales that require a one-year warranty, the extended warranty is treated for revenue recognition purposes as a maintenance agreement. The fair value of this maintenance agreement is deferred and recognized ratably over the period of the extended warranty as an implied maintenance contract. Installation service revenues are recognized upon completion of the installation. Training revenues are recognized upon completion of the training.
 
In accordance with ASC 605, Revenue Recognition, when two or more product offerings are contained in a single arrangement, revenue is allocated between the elements based on their relative fair value, provided that each element meets the criteria for treatment as a separate unit of accounting. An item is considered a separate unit of accounting if it has value to the customer on a stand-alone basis and there is objective and reliable evidence of the fair value of the undelivered items. Fair value is generally determined based upon the price charged when the element is sold separately. In the absence of fair value for a delivered element, revenue is allocated first to the fair value of the undelivered elements and then the residual revenue is allocated to the delivered elements. In the absence of fair value for an undelivered element, the arrangement is accounted for as a single unit of accounting, resulting in a delay of revenue recognition for the delivered elements until all undelivered elements have been fulfilled.
 
Revenues from training and installation are unbundled and are recognized after the services have been performed. Most of the Company’s products are sold through distribution channels, with training and installation services offered by the resellers. For the Dimension products neither installation nor training is offered by the Company. The equipment manufactured and sold by the Company is subject to factory testing that replicates the conditions under which the customers intend to use the equipment. All of the systems are sold subject to published specifications, and all systems sales involve standard models.
 
F-13
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company assesses collectibility as part of the revenue recognition process. This assessment includes a number of factors such as an evaluation of the creditworthiness of the customer, past due amounts, past payment history, and current economic conditions. If it is determined that collectibility cannot be reasonably assured, the Company will decline shipment, request a down payment, or defer recognition of revenue until ultimate collectibility is reasonably assured.
 
The Company also records a provision for estimated product returns and allowances in the period in which the related revenue is recorded. This provision against current gross revenue is based principally on historical rates of sales returns, but also factors in changes in the customer base, geographic economic conditions, and changes in the financial conditions of the Company’s customers. There was no provision for product returns and allowances at December 31, 2010 or 2009.
 
Foreign Currency Hedge
 
The Company invoices sales to certain European distributors in Euros and such receivable balances are subject to fluctuations in the exchange rates of that currency in relation to the United States dollar. The Company’s strategy is to hedge most of its Euro-denominated accounts receivable positions by entering into 30-day foreign currency forward contracts on a month-to-month basis to reduce the risk that its earnings will be adversely affected by changes in currency exchange rates. The Company does not use derivative financial instruments for speculative or trading purposes. The Company enters into 30-day foreign currency forward contracts on the last day of each month and therefore the notional value of the contract equals the fair value at the end of each reporting period. As such, there is no related asset or liability or unrealized gains or losses recorded on the Balance Sheet as of the end of the period. All realized gains and losses related to hedging activities are recorded in current period earnings under the Statement of Operations caption “Foreign currency transaction losses, net”.
 
Advertising
 
Advertising costs are charged to operations as incurred and were approximately $2.8 million, $3.4 million, and $4.0 million, for 2010, 2009 and 2008, respectively.
 
Research and Development Costs
 
Expenditures for research, development and engineering of products and manufacturing processes are expensed as incurred, in accordance with ASC 730, Research and Development.
 
Sales Tax
 
Taxes collected from customers and remitted to governmental authorities are recorded on a net basis (excluded from revenues) in the Company’s Consolidated Statement of Operations.
 
Income Taxes
 
The Company complies with ASC 740, Income Taxes, (“ASC 740”) which requires an asset and liability approach to financial reporting of income taxes. Deferred income tax assets and liabilities are computed for differences between the financial statement and tax basis of assets and liabilities that will result in taxable or deductible amounts in the future, based on enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established, when necessary, to reduce the deferred income tax assets to the amount expected to be realized.
 
In accordance with ASC 740, the Company takes a two-step approach to recognizing and measuring uncertain tax positions (tax contingencies). The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount which is more than 50% likely of being realized upon ultimate settlement. The Company reevaluates these tax positions quarterly and makes adjustments as required.
 
F-14
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Earnings Per Share
 
The Company complies with ASC 260, Earnings Per Share, which requires dual presentation of basic and diluted income per common share for all periods presented. Basic net income per share excludes dilution and is computed by dividing net income by the weighted average number of shares outstanding for the periods that have net income. Diluted net income per share reflects the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock or resulted in the issuance of common stock that then share in the income of the Company. The difference between the number of common shares used to compute basic net income per share and diluted net income per share relates to additional common shares that would be issued upon the assumed exercise of stock options and warrants, net of the common shares that would hypothetically be repurchased using the proceeds received from the original exercise. The additional common shares amounted to 550,121 in 2010, 32,252 in 2009 and 402,829 in 2008. Total shares excluded from the dilution calculation, since their inclusion would have an anti-dilutive effect, amounted to 400 in 2010, 812,000 in 2009 and 265,000 in 2008.
 
Stock-Based Compensation
 
The Company calculates the fair value of stock-based option awards on the date of grant using the Black-Scholes option pricing model. The computation of expected volatility is based on historical volatility from traded options on our stock. The expected option term is calculated in accordance with ASC 718, Compensation – Stock Compensation. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury yield curve in effect at the time of grant. Each of the three factors requires the Company to use judgment and make estimates in determining the percentages and time periods used for the calculation. If the Company were to use different percentages or time periods, the fair value of stock-based option awards could be materially different.
 
Accrued Product Warranties
 
The Company’s products are covered by a warranty with periods ranging from ninety days to fifteen months from the date of sale to the end customer. A liability is recorded for future warranty costs in the same period in which related revenue is recognized. The liability is based on anticipated parts and labor costs utilizing historical experience. The Company periodically assesses the adequacy of the warranty reserves based on changes in these factors and records any necessary adjustments if actual experience indicates that adjustments are necessary. Future claims experience could be materially different from prior results because of the introduction of new, more complex products, a change in the Company’s warranty policy in response to industry trends, competition or other external forces, or manufacturing changes that could impact product quality. In the event that the Company determines that its current or future product repair and replacement costs exceed estimates, an adjustment to these reserves would be charged to earnings in the period such a determination is made. As of December 31, 2010 and 2009, the Company had $1.2 million and $0.7 million, respectively, accrued for future estimated warranty claims.
 
Comprehensive Income
 
The Company complies with ASC 220, Comprehensive Income, which establishes rules for the reporting and display of comprehensive income (loss) and its components. The Company reports the financial impact of translating its foreign subsidiaries’ financial statements from local currency to reporting currency as a component of comprehensive income (loss). The Company also holds securities classified as “available-for-sale” that are accounted for at fair value with the unrealized gain or loss, net of tax, reported in other comprehensive income (loss).
 
Recently Issued Accounting Pronouncements
 
In January 2010, the FASB issued Accounting Standards Update (“ASU”) 2010-6, Improving Disclosures About Fair Value Measurements, that amends existing disclosure requirements under ASC 820 by adding required disclosures about items transferring into and out of levels 1 and 2 in the fair value hierarchy; adding separate disclosures about purchases, sales, issuances, and settlements relative to level 3 measurements; and clarifying, among other things, the existing fair value disclosures about the level of disaggregation. This ASU is effective for interim and annual reporting periods beginning after December 15, 2009, except for Level 3 reconciliation disclosures, which are effective for interim and annual periods beginning after December 15, 2010. Additional disclosures required by this standard for 2010 are included in Note 10 – Fair Value Measurements. Since this standard impacts disclosure requirements only, the adoption of this standard did not have an impact on the Company’s consolidated results of operations or financial condition.
 
F-15
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
In July 2010, the FASB issued ASU 2010-20, Disclosures about the Credit Quality of Financing Receivables and the Allowance for Credit Losses, which amends ASC 310, Receivables. The purpose of the update is to improve transparency by companies that hold financing receivables, including loans, leases and other long-term receivables. The update requires such companies to disclose more information about the credit quality of their financing receivables and the credit reserves against them. ASU 2010-20 requires further disaggregated disclosures that improve financial statement users’ understanding of (1) the nature of an entity’s credit risk associated with its financing receivables and (2) the entity’s assessment of the risk in estimating its allowance for credit losses as well as changes in the allowance and the reasons for those changes. The new and amended disclosures as of the end of a reporting period are effective for interim and annual reporting periods ending on or after December 15, 2010. This did not have an impact on the Company’s consolidated results of operations and financial condition.
 
Note 2. Investments
 
Classification of investments as current or non-current is dependent upon management’s intended holding period, the investment’s maturity date and liquidity considerations based on market conditions. These investments are then evaluated and classified as available-for-sale or held-to-maturity in accordance with the provisions of ASC 320, Investments - Debt and Equity Securities. This evaluation takes into consideration the Company’s past history of holding investments until maturity, projected cash flow estimates, future capital requirements, the existence of credit deterioration of the issuer and the Company’s overall investment strategy as established by management and approved by the Company’s Board of Directors.
 
If management has the positive intent and ability to hold its debt securities until maturity, they are classified as “held-to-maturity” and accounted for using the amortized-cost method. All other securities are classified as “available-for-sale” and accounted for at fair value with the unrealized gain or loss, net of tax, reported in other comprehensive income. The Company does not hold any investments for trading purposes and had no unrecognized gains or losses related to held-to-maturity investments at December 31, 2010 or December 31, 2009, as the fair value of those investments approximated cost.
 
The Company invests in certificates of deposit, corporate bonds, tax-free government bonds, and Auction Rate Securities (“ARS”), all of which are insured. The following is a summary of amounts recorded on the Consolidated Balance Sheet for marketable securities (current and non-current) at December 31, 2010 and 2009.
 
F-16
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
        2010       2009
Bonds   $      6,837,521   $      8,113,361
Other securities     357     357
Certificates of deposit     1,960,000     7,960,000
Short-term investments - held to maturity     8,797,878     16,073,718
             
Auction rate securities     1,185,250     1,055,750
Long-term investments - available for sale securities     1,185,250     1,055,750
             
Auction rate securities     2,200,000     2,400,000
Bonds     50,304,650     1,107,318
Certificates of deposit     -     1,960,000
Long-term investments - held to maturity     52,504,650     5,467,318
             
Total investments   $ 62,487,778   $ 22,596,786
             

Short-term and long-term investments consist of certificates of deposit, corporate bonds, tax-free government bonds, and ARS. At December 31, 2010, the Company’s investments included:
The balance sheet caption titled “Long-term investments – available for sale securities” consists of a tax-free ARS. This balance represents the current estimated fair value of an ARS issued by Jefferson County, Alabama with a face value of $2.6 million and maturity in 2042. The investment is part of a multi-billion series of bonds issued by Jefferson County to build its sewer and water treatment system (“system”). The County entered into interest rate swaps to protect itself from rising interest rates, but the swaps proved ineffective and the revenue from the system will not adequately support the higher interest rates. However, with the collapse of the ARS market and the County’s financial condition, the rating of this ARS has gone from Aaa to Caa3. The Company has received $50,000 in principal payments on this ARS and no additional principal payments have become due. The Company has received all scheduled interest payments on this ARS through December 31, 2010. Due to the current financial condition of the County and the absence of an active market for this security, the Company only records interest income as cash payments are received.
 
With the assistance of outside consultants, the Company periodically reviews this ARS, including expected cash flows, assesses the credit risk, analyzes and extrapolates yield information on comparable composites, and reviews independent research from various public sources concerning the ARS market. Based upon a reevaluation that occurred in late 2010, the Company concluded that the fair value of this ARS had increased and the Company adjusted its carrying value to eliminate the amount of the previously recognized temporary impairment. The following table summarizes the activity of this investment from December 31, 2007 to December 31, 2010.
 
F-17
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Face value of investment as of December 31, 2007       $ 2,600,000  
Principal payment     (25,000 )
Temporary impairment - recognized in other comprehensive income     (195,000 )
Other-than-temporary impairment - recognized in other income     (1,270,750 )
Net carrying value at December 31, 2008     1,109,250  
         
Temporary impairment transferred to other-than-temporary impairment     40,500  
Other-than-temporary impairment - recognized in other income     (94,000 )
Net carrying value at December 31, 2009     1,055,750  
         
Principal payment     (25,000 )
Adjustment to temporary impairment - recognized in other comprehensive income     154,500  
Net carrying value at December 31, 2010   $      1,185,250  

Note 3. Inventories
 
Inventories consisted of the following at December 31:
 
        2010       2009
Finished goods   $ 7,045,840   $ 6,288,314
Raw materials     10,834,874     8,319,700
    $      17,880,714   $      14,608,014
             

Note 4. Net Investment in Sales-type Leases
 
Certain system sales made under lease arrangements are recorded as sales-type leases. Included in revenues for the years ended December 31, 2010, 2009 and 2008 are approximately $1.9 million, $1.7 million and $3.1 million, respectively, related to sales-type leases.
 
The Company’s net investment in sales-type leases consisted of the following at of December 31, 2010 and 2009:
 
        2010       2009
Future minimum lease payments receivable   $ 6,691,118     $ 7,713,133  
Less allowance for doubtful accounts     (189,338 )     (222,011 )
Net future minimum lease payment receivable     6,501,780       7,491,122  
Less unearned interest income     (337,423 )     (395,207 )
Net investment in sales-type leases   $      6,164,357     $      7,095,915  
                 

Future minimum lease payments due from customers under sales-type leases as of December 31, 2010 were as follows:
 
Year ending December 31,      
2011   $      3,464,982
2012     1,532,171
2013     1,017,402
2014     510,694
2015     165,869
    $ 6,691,118
       

F-18
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The interest income for sales-type leases amounted to approximately $277,000, $405,000, and $444,000 for the years ended December 31, 2010, 2009 and 2008, respectively.
 
Additional credit risk disclosures required by ASU 2010-20, Disclosures about the Credit Quality of Financing Receivables and the Allowance for Credit Losses, only apply to the Company’s lease receivables, which account for less than 4% of the Company’s total assets. The Company did not include additional disclosures based on the following factors:
Note 5. Property and Equipment
 
Property and equipment consisted of the following at December 31:
 
        2010       2009
Machinery and equipment   $      26,333,224     $      23,933,169  
Building and improvements     13,987,226       11,780,928  
Computer equipment and software     10,868,317       10,305,828  
Office equipment     2,581,119       2,473,521  
Furniture and fixtures     2,282,460       2,213,695  
      56,052,346       50,707,141  
Accumulated depreciation and amortization     (34,588,157 )     (29,352,906 )
      21,464,189       21,354,235  
                 
Capital work-in-progess     3,979,137       1,851,158  
Land and improvements     4,429,619       3,120,619  
    $ 29,872,945     $ 26,326,012  
                 

F-19
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 6. Intangible Assets
 
Intangible assets consisted of the following at December 31:
 
    2010   2009
    Gross       Gross    
    Carrying   Accumulated   Carrying   Accumulated
        Amount       Amortization       Amount       Amortization
RP technology   $ 5,548,064   $ 4,024,802   $ 5,548,417   $ 3,709,907
Capitalized software development costs     13,431,570     10,500,398     12,263,654     8,578,822
Patents     3,413,062     2,352,205     3,304,396     2,066,802
Trademarks     298,969     276,246     287,682     263,049
      22,691,665   $ 17,153,651     21,404,149   $ 14,618,580
Accumulated amortization     17,153,651           14,618,580      
Net book value of amortizable intangible assets     5,538,014           6,785,569      
Goodwill     867,700           867,700      
Net book value intangible assets   $ 6,405,714         $ 7,653,269      
                         

For the years ended December 31, 2010, 2009 and 2008, amortization of intangible assets charged to operations was approximately $2.5 million, $2.4 million and $2.1 million, respectively. The weighted average remaining amortization period for intangible assets as of December 31, 2010 and 2009 was approximately 2.2 and 2.8 years, respectively.
 
Estimated amortization expense, for all intangible assets, for the five years subsequent to December 31, 2010 is as follows:
 
Year ending December 31,      
2011   $      2,026,000
2012     1,250,000
2013     902,000
2014     555,000
2015     354,000

Note 7. Line of Credit
 
The Company had an available line of credit from a financial institution of $1.0 million as of December 31, 2009 that bears interest at defined rates based upon two different indexes. The credit line was allowed to expire in July of 2010 as the Company determined that it was no longer necessary. No amounts were outstanding at December 31, 2010 and 2009.
 
F-20
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 8. Accounts Payable and Other Current Liabilities
 
Accounts payable and other current liabilities consisted of the following at December 31:
 
  2010      2009
Trade $ 7,406,429   $ 4,833,992
Compensation, commissions and related benefits   3,891,146     2,993,844
Reserve for warranty expenses   1,204,450     677,757
Taxes   -     2,686,979
Other   1,906,603     1,682,226
  $       14,408,628   $       12,874,798
           
A summary of warranty activity for the years ended December 31, 2010 and 2009 is as follows:
 
  2010      2009
Beginning balance $ 677,757     $ 321,874  
Accruals for warranties issued during the period   1,991,014       1,280,163  
Warranty costs incurred during the period   (1,464,321 )     (924,280 )
Ending balance $       1,204,450     $       677,757  
               
Note 9. Unearned Revenues
 
Unearned revenues consisted of the following at December 31:
 
  2010      2009
Maintenance contracts $ 10,167,918   $ 9,223,806
Implied maintenance contracts   573,197     566,377
Other   820,406     888,244
  $       11,561,521   $       10,678,427
           
F-21
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 10. Income Taxes
 
The components of the Company's deferred tax assets (liabilities) at December 31, 2010 and 2009 were as follows:
 
  2010      2009
Current deferred tax assets:              
       Inventory reserves $ 776,000     $ 700,000  
       Deferred maintenance revenue   525,000       551,000  
       Allowance for doubtful accounts   393,000       330,000  
       State research and development              
              credit carryforward   203,000       158,000  
       Reserve for warranty expenses   449,000       252,000  
       Vacation accrual   313,000       239,000  
       Warrant cost accrual   795,000       -  
       Unrealized loss on foreign currency   -       47,000  
              Current deferred tax assets   3,454,000       2,277,000  
Current deferred tax liabilities:              
       Unrealized gain on foreign currency   (7,000 )     -  
Net current deferred tax assets $ 3,447,000     $ 2,277,000  
               
Long-term deferred tax assets:              
       Stock compensation expense $ 487,000     $ 458,000  
       Investment reserves   639,000       694,000  
       Amortization   973,000       820,000  
              Long-term deferred tax assets   2,099,000       1,972,000  
Long-term deferred tax liabilities:              
       Depreciation   (1,980,000 )     (1,047,000 )
       Software capitalization   (326,000 )     (237,000 )
Net long-term deferred tax assets (liabilities) $       (207,000 )   $       688,000  
               
Income before income taxes for the years ended December 31, 2010, 2009 and 2008 was as follows:
 
  2010      2009      2008
United States $       13,506,311   $       5,994,420   $       20,270,134
Foreign   329,027     187,852     463,353
  $ 13,835,338   $ 6,182,272   $ 20,733,487
                 
F-22
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The components of income tax expense for the years ended December 31, 2010, 2009 and 2008 were as follows:
 
  2010      2009      2008
Current                    
       Federal $ 4,336,929     $ 3,143,000     $ 5,976,000
       State   247,570       416,000       878,000
       Foreign   103,295       130,000       121,000
    4,687,794       3,689,000       6,975,000
                     
Deferred                    
       Federal   (160,000 )     (1,604,000 )     133,000
       State   (62,000 )     (19,000 )     10,000
    (222,000 )     (1,623,000 )     143,000
       Total Income taxes $       4,465,794     $       2,066,000     $       7,118,000
                     
The Company reflected a permanent book to tax difference in accounting for employee stock option transactions, in accordance with ASC 740. The Company adjusted additional paid-in capital by approximately $3.0 million, $(83,000) and $42,000 in the years ended December 31, 2010, 2009 and 2008 respectively, to account for the tax impact of the stock option transactions, in accordance with ASC 740.
 
A reconciliation of the statutory federal income tax rate and the effective tax rate for the years ended December 31, 2010, 2009, and 2008 is set forth below:
 
  2010      2009      2008
Federal statutory rate 35.0 %   35.0 %   35.0 %
State income taxes, net of                
       federal benefit 2.1     2.6     2.5  
Tax exempt interest income (0.8 )   (2.6 )   (2.0 )
Stock compensation expense 0.2     2.0     1.3  
Manufacturing deduction (3.5 )   (2.0 )   (1.4 )
Federal research and                
       development tax credit (1.9 )   (4.9 )   (2.1 )
Tax contingencies 1.3     2.4     0.9  
Other (0.1 )   0.9     0.1  
Effective income tax rate        32.3 %          33.4 %          34.3 %

At December 31, 2010 the Company had Minnesota tax credit carry-forwards of approximately $203,000. The Company expects to utilize its state research and development tax credit carry-forwards that would otherwise expire from 2018 through 2025.
 
Significant judgment is required in evaluating the Company’s tax positions and determining its provision for income taxes. During the ordinary course of business, there are many transactions and calculations for which the ultimate tax determination is uncertain. The Company establishes reserves for tax-related uncertainties based on estimates of whether, and the extent to which, additional taxes will be due. These reserves are established when the Company believes that certain positions might be challenged despite its belief that its tax return positions are fully supportable. The Company adjusts these reserves in light of changing facts and circumstances, such as the outcome of a tax audit or changes in the tax law. The provision for income taxes includes the impact of reserve provisions and changes to reserves that are considered appropriate. Accruals for tax contingencies are provided for in accordance with the requirements of ASC 740.
 
F-23
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company is subject to income taxes in the U.S., various states and certain foreign jurisdictions. It may be subject to examination by the Internal Revenue Service (“IRS”) for calendar years 2007 through 2010. Its Federal income tax returns are closed for all tax years up to and including 2006. The expiration of the statute of limitations related to the various state income tax returns that the Company and subsidiaries file varies by state and foreign jurisdiction.
 
At December 31, 2010 and 2009, the Company had unrecognized tax benefits of $1.4 million and $1.2 million, respectively. If recognized, these benefits would favorably impact the effective tax rate. A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:
 
  2010      2009
Balance at beginning of year $       1,232,000     $       1,223,000  
Additions for tax positions related to the current year   118,000       95,000  
Additions for tax positions related to previous years   255,000       -  
Reduction of reserve for statute expirations   (200,000 )     (86,000 )
Balance at end of year $ 1,405,000     $ 1,232,000  
               
The increase in tax liabilities is primarily due to potential U.S. federal and state adjustments related to positions taken in the Company’s 2010 income tax provision. The balance of the reserve for tax uncertainties includes $120,000 for estimated interest and penalties at December 31, 2010 and 2009. The Company currently estimates that unrecognized tax benefits will not change materially in the next twelve months.
 
We regularly assess the likelihood of tax adjustments in each of the tax jurisdictions in which we have operations and account for the related financial statement implications. Tax reserves have been established which we believe to be appropriate given the possibility of tax adjustments. Determining the appropriate level of tax reserves requires us to exercise judgment regarding the uncertain application of tax law. The amount of reserves is adjusted when information becomes available or when an event occurs indicating a change in the reserve is appropriate. Future changes in tax reserve requirements could have a material impact on our results of operations.
 
We are continually under examination by tax authorities in which we have operations. The years under examination vary by jurisdiction. We have received a notice of proposed adjustments to our filed Minnesota returns for tax years 2007 and 2008 in relation to the claimed research and development credit. Tax reserves have been established for a portion of this proposed change in tax, which we believe to be appropriate given the possibility of tax adjustments.
 
Undistributed earnings of the Company’s Germany subsidiary amounted to approximately $262,000 and $230,000 as of December 31, 2010 and 2009. The Company has not provided any additional U.S. federal or state income taxes or foreign withholding taxes on the undistributed earnings as such earnings have been indefinitely reinvested in the business as defined in the provisions of ASC 740. The determination of the amount of the unrecognized deferred tax liability related to the undistributed earnings is not practicable because of the complexities associated with its hypothetical calculation.
 
Note 11. Fair Value Measurements
 
As discussed in Note 1, the Company adopted the provisions of ASC 820, Fair Value Measurements, on January 1, 2008 for financial assets and liabilities and for non-financial assets and non-financial liabilities measured on a non-recurring basis on January 1, 2009. In January 2010, the FASB issued ASU 2010-6, Improving Disclosures About Fair Value Measurements, that amends existing disclosure requirements under ASC 820 by adding required disclosures about items transferring into and out of levels 1 and 2 in the fair value hierarchy; adding separate disclosures about purchases, sales, issuances, and settlements relative to level 3 measurements; and clarifying, among other things, the existing fair value disclosures about the level of disaggregation. This ASU was effective for interim and annual reporting periods beginning after December 15, 2009, except for Level 3 reconciliation disclosures, which are effective for interim and annual periods beginning after December 15, 2010.
 
F-24
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Fair value is defined as the exit price, or the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants as of the measurement date. A hierarchy has been established for inputs used in measuring fair value that maximizes the use of observable inputs and minimizes the use of unobservable inputs by requiring that the most observable inputs be used when available.
 
Observable inputs are inputs market participants would use in valuing the asset or liability developed based on market data obtained from sources independent of the Company. Unobservable inputs are inputs that reflect the Company’s assumptions about the factors market participants would use in valuing the asset or liability developed based upon the best information available in the circumstances. The hierarchy is broken down into three levels. Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities. Level 2 inputs include quoted prices for similar assets or liabilities in active markets, quoted prices for identical or similar assets or liabilities in markets that are not active, and inputs (other than quoted prices) that are observable for the asset or liability, either directly or indirectly. Level 3 inputs are unobservable inputs for the asset or liability. Categorization within the valuation hierarchy is based upon the lowest level of input that is significant to the fair value measurement.
 
Assets and Liabilities that are Measured at Fair Value on a Recurring Basis:
 
For financial assets held by the Company, fair value principally applies to available-for-sale marketable securities. These items were previously, and will continue to be, marked-to-market at each reporting period. The information in the following paragraphs and tables primarily addresses matters relative to these financial assets. The Company does not have any financial liabilities that are subject to fair value measurements. Separately, there were no material fair value measurements with respect to non-financial assets or liabilities that are recognized or disclosed at fair value in the Company’s financial statements on a recurring basis subsequent to the effective date of such accounting guidance.
 
The Company uses various valuation techniques, which are primarily based upon the market approach, with respect to its financial assets. As discussed in Note 2, one of the auction rate securities held by the Company has experienced a significant credit rating reduction since its acquisition. As a result, investments in auction rate securities are valued utilizing a quantitative and qualitative third-party analysis. The Company therefore classifies these securities as Level 3.
 
The following table provides a reconciliation of the beginning and ending balances of items measured at fair values on a recurring basis that used significant unobservable inputs and are classified as long-term investments – available for sale securities:
 
    Year ended December 31,
Auction rate securities      2010      2009
Beginning balance   $       1,055,750     $       1,109,250  
Total gains or (losses):                
       Included in earnings     -       (94,000 )
       Included in other comprehensive income     154,500       40,500  
Settlements     (25,000 )     -  
Ending balance   $ 1,185,250     $ 1,055,750  
                 
F-25
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Assets and Liabilities that are Measured at Fair Value on a Nonrecurring Basis:
 
The aspects of ASC 820 for which the effective date was deferred until January 1, 2009 relate to non-financial assets and liabilities that are measured at fair value but are recognized or disclosed at fair value on a nonrecurring basis.
 
At December 31, 2009, the Company recorded a $350,000 impairment related to a $1.4 million equity investment that is accounted for under the cost method as prescribed by ASC 325-20, Cost Method Investments. During the fourth quarter of 2009, the Company considered the entity’s current and projected decreases in revenue to be an impairment indicator and consequently performed a fair value analysis. The resulting impairment of $350,000 was considered to be other-than-temporary and was recognized as a charge to other income (expense).
 
Note 12. Material Commitments
 
The Company estimates that at December 31, 2010 and 2009, it had approximately $22.5 million and $13.6 million, respectively, of purchase commitments for inventory from vendors. The Company also rents certain of its facilities under non-cancellable operating leases, which expire through 2014. The Company intends to finance its future purchase commitments from existing cash and investments or from cash flows from operations.
 
Minimum annual operating lease payments as of December 31, 2010 are approximately as follows:
 
Year ending December 31,         
2011   $       543,357
2012     210,486
2013     65,189
2014     1,297
2015     -
Thereafter     -
    $ 820,329
       

Rent expense for the years ended December 31, 2010, 2009 and 2008 was approximately $669,000, $589,000 and $598,000, respectively.
 
Note 13. Restructuring Activities
 
Beginning January 1, 2009, in North America the Company began selling its Fortus 3D Production Systems through a select group of resellers from its established reseller channel, which formerly distributed only the Dimension 3D Printer line. This restructuring of the Company’s sales organization included costs related to workforce reductions, closure of certain leased facilities, rebranding expenses, and other contract termination charges that were recognized in 2008 and were settled during the first quarter of 2009.
 
In addition, the Company took certain cost-saving measures in the first quarter of 2009 that lowered fixed costs and curtailed some discretionary spending while maintaining a focus on the key goals and objectives of the Company’s long-term strategy. These cost-saving measures resulted in a charge of $779,000 in the first quarter of 2009, consisting primarily of severance costs related to a reduction in force. Final severance payments were completed during the third quarter of 2009 and the unused portion of the provision, noted as “adjustments” in the table below, was recorded in income for the current period.
 
F-26
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
A summary of the activity of these restructuring and other costs recognized in the Statement of Operations caption “Selling, general and administrative” is as follows:
 
  Employee-   Contract        
  Related Items and   Terminations and        
  Benefits      Other      Total
Accrued balance as of December 31, 2008 $       306,014     $       66,881     $       372,895  
Expenses incurred   779,000       -       779,000  
Cash payments   (810,707 )     (66,881 )     (877,588 )
Adjustments   (274,307 )     -       (274,307 )
Accrued balance as of December 31, 2009 $ -     $ -     $ -  

Note 14. Accounting for Collaborative Arrangements
 
In 2008, the Company fulfilled its responsibilities under a three-year, $3.6 million agreement with a Fortune 500 global manufacturing company to jointly advance its proprietary FDM technology for rapid manufacturing applications. This agreement entitled the Company to receive reimbursement payments as it achieved specific milestones stated in the agreement. This effort was focused around the Company’s high-performance systems and resulted in the commercial release of the Fortus 900mc. Because receipt of these payments represented reimbursements of costs actually incurred under this joint development project, all payments received were recorded as offsets to the research and development expenditures and are therefore not recognized as revenue.
 
Due to the success of this initial arrangement, the Company is continuing this relationship under similar terms and objectives. During the years ended December 31, 2010, 2009 and 2008, approximately $1.2 million, $2.2 million, and $0.3 million, respectively, of research and development expenses were offset by payments that were received from this company.
 
Note 15. Foreign Currency Hedge
 
The Company hedged between €2.3 million and €4.5 million during the year ended December 31, 2010, between €2.8 million and €5.0 million during the year ended December 31, 2009 and between €2.5 million and €5.1 million during the year ended December 31, 2008 related to accounts receivable that were denominated in Euros. The foreign currency forward contracts resulted in a currency gain of approximately $340,000 for the year ended December 31, 2010, a loss of $115,000 for the year ended December 31, 2009 and a gain of $235,000 for the year ended December 31, 2008.
 
The Company will continue to monitor exposure to currency fluctuations. Instruments that may be used to hedge future risks may include foreign currency forward, swap, and option contracts. These instruments may be used to selectively manage risks, but there can be no assurance that we will be fully protected against material foreign currency fluctuations.
 
Note 16. Common Stock
 
The Company has a common stock repurchase program, but did not repurchase any shares during the years ended December 31, 2010 and 2009. As of December 31, 2010, the Company had authorization to repurchase approximately $10.9 million of common stock under the stock repurchase program.
 
F-27
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 17. Fair Value of Warrant Related to OEM Agreement
 
During the first quarter of 2010, the Company signed a Master OEM Agreement (the “OEM Agreement”) with Hewlett-Packard Company (“HP”) to develop and manufacture an HP-branded 3D printer. In connection with the OEM Agreement, the Company issued a warrant to HP during the first quarter of 2010 to purchase 500,000 shares of common stock at an exercise price of $17.78 per share. The exercise price was determined by the 20 day average market closing price of the Company’s common stock immediately prior to the issuance of the warrant. The warrant vested immediately and has a seven-year term. The warrant was not exercised during 2010. The fair value of the warrant is properly classified as a reduction of revenue on the Consolidated Statement of Operation for the year ended December 31, 2010.
 
The Company used the Black-Scholes option-pricing model to determine the fair value of the warrant granted to HP. The following assumptions were applied in determining the compensation cost:
 
Risk-free interest rate   3.1 %
Expected option term   4.5 years  
Expected price volitility   47 %
Dividend yield   -  
Weighted average grant date fair value $       9.98  

The Company’s computation of expected volatility is based on a combination of historical and market-based implied volatility from traded options on the Company’s stock. The expected option term was calculated in accordance with ASC 718. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury yield curve in effect at the time of grant.
 
F-28
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 18. Stock Options and Warrants
 
The Company has various stock option plans that have been approved by stockholders. The plans provide for the granting of options to purchase up to 4,825,000 shares of the Company’s common stock to qualified employees of the Company, independent contractors, consultants, and other persons of which 4,012,634 had been granted and 812,366 shares remain available to be granted by the Company as of December 31, 2010. Options principally vest immediately or ratably over five years and are exercisable over a period ranging from five years to six years and one-month. The information presented below has been adjusted to reflect the Company’s two-for-one stock split in August 2007.
 
                    Weighted
  Number               Average
  of Options   Per Share   Exercise
  Outstanding      Exercise Price      Price
Shares under option                      
       at January 1, 2008        1,802,028     $       1.02      -      $       26.15   $       15.02
Granted in 2008 281,500       9.30 -   22.06     11.67
Exercised in 2008 (234,300 )     1.67 -   14.43     13.78
Expired in 2008 (53,050 )     1.02 -   14.30     11.78
Forfeited in 2008 (60,800 )     12.49 -   23.04     15.05
Shares under option                      
       at December 31, 2008 1,735,378       2.54 -   26.15     14.42
Granted in 2009 283,750       8.27 -   9.90     9.82
Exercised in 2009 (294,400 )     4.35 -   14.53     12.90
Expired in 2009 (122,800 )     3.81 -   14.43     14.30
Forfeited in 2009 (82,300 )     9.30 -   23.04     14.68
Shares under option                      
       at December 31, 2009 1,519,628       8.27 -   26.15     14.08
Granted in 2010 300,000       18.26 -   23.85     18.30
Exercised in 2010 (456,200 )     9.30 -   26.15     13.97
Forfeited in 2010 (46,900 )     9.30 -   23.04     14.68
Repurchased in 2010 (138,878 )     9.30 -   26.15     14.04
Shares under option                      
       at December 31, 2010 1,177,650     $ 8.27 - $ 26.15   $ 15.08
                       
F-29
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
A summary of stock options exercisable at December 31, 2010, 2009 and 2008 is as follows:
 
                  Weighted
  Number               Average
  of   Per Share   Exercise
  Shares      Exercise Price      Price
Options exercisable at                    
       December 31, 2010 441,850   $       8.27      -      $       26.15   $       14.95
                     
Options exercisable at                    
       December 31, 2009 735,478   $ 8.27 - $ 26.15   $ 14.49
                     
Options exercisable at                    
       December 31, 2008        1,199,078   $ 2.54 - $ 26.15   $ 13.57
                     
The following table summarizes information about stock options outstanding at December 31, 2010:
 
    Options Outstanding   Options Exercisable
    Number   Weighted-         Number      
    Outstanding   Average   Weighted-   Exercisable   Weighted-
    at   Remaining   Average   at   Average
Exercise   December 31,   Contractual   Exercise   December 31,   Exercise
Prices      2010      Life in Years      Price      2010      Price
$8.27 - 9.90     345,750          4.3   $       9.67     66,150   $       9.35
12.49 - 16.17     342,900   1.7     13.25     272,700     13.22
18.26 - 19.15     295,000   5.1     18.26     800     18.97
$21.96 - 26.15     194,000   2.9     23.11     102,200     23.16
      1,177,650         15.08     441,850     14.95
                             
Aggregate                            
intrinsic value   $       20,677,463             $       7,814,433      
                             
The weighted average life remaining on vested options is 2.0 years. The weighted average grant date fair value based on the Black-Scholes model was $6.13 for options granted in 2010 and $5.89 for options forfeited in 2010. The Company issues new shares of common stock upon exercise of stock options. The total intrinsic value of options exercised was approximately $8.2 million in 2010, $3.1 million in 2009 and $1.1 million in 2008. During the first quarter of 2010, the Company repurchased 138,878 vested stock options from 42 employees and directors.
 
F-30
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company used the Black-Scholes option-pricing model to determine the fair value of grants made in 2010, 2009 and 2008. The following assumptions were applied in determining the compensation cost:
 
  2010      2009      2008
Risk-free interest rate   2.3 %     2.0 %     3.9 %
Expected option term 4.5 years     4.5 years     4.5 years  
Expected price volitility   39 %     40 %     43 %
Dividend yield   -       -       -  
Weighted average grant date fair value $       6.13     $       3.59     $       4.54  

The Company’s computation of expected volatility is based on a combination of historical and market-based implied volatility from traded options on the Company’s stock. The expected option term was calculated in accordance with ASC 718. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury yield curve in effect at the time of grant.
 
As of December 31, 2010, there were 735,800 unvested options with a weighted average grant date fair value of $5.52 based on the Black-Scholes model. As of December 31, 2010, approximately $3.6 million of total unrecognized compensation expense related to unvested share-based compensation granted under the Company’s plans. That cost is expected to be recognized over a weighted-average period of 2.1 years. The fair value of option shares vested during the year 2010 was approximately $1.5 million.
 
In 2010, the Company issued a warrant to HP during the first quarter of 2010 to purchase 500,000 shares of common stock at an exercise price of $17.78 per share, which vested immediately and has a seven-year term. The warrant was not exercised during 2010. There were no outstanding warrants to purchase the Company’s common stock as of December 31, 2009 and no warrants were exercised during 2009. As of December 31, 2008, the Company had 310,500 warrants outstanding with exercise prices ranging from $11.56 to $13.82 with a weighted average price per share of $12.34. These remaining warrants expired on February 22, 2009 without being exercised. During 2008, 59,639 net shares were issued as a result of the exercise of warrants. Stock warrants totaling 139,500 shares were exercised at an average price of $11.99 per share; 79,861 shares were surrendered as payment, in lieu of cash, at an average price of $20.95 per share.
 
Note 19. Litigation
 
The Company is a party to various legal proceedings, the outcome of which, in the opinion of management, will not have a material adverse effect on the financial position, results of operations or cash flows of the Company.
 
Note 20. Export Sales
 
Export sales were as follows for the years ended December 31:
 
       2010      2009      2008
  Europe $ 34,362,430   $ 26,308,543   $ 37,430,146
  Asia Pacific   20,536,318     15,814,405     18,533,549
  Other   2,049,761     1,076,828     1,883,206
    $       56,948,509   $       43,199,776   $       57,846,901
                   
F-31
 

 

STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
At December 31, 2010, 2009 and 2008, accounts receivable included balances due from foreign customers of approximately $11.6 million, $11.7 million and $13.8 million, respectively.
 
Note 21. Retirement Plan
 
The Company has a defined contribution retirement plan (the “Plan”) under the provisions of Section 401(k) of the Internal Revenue Code (“IRC”) that covers all eligible employees as defined in the Plan. Participants may elect to contribute up to 50% of pre-tax annual compensation, as defined by the Plan, up to a maximum amount prescribed by the IRC. The Company, at its discretion, makes matching contributions equal to the lesser of $3,000 or 3% of the participant’s annual compensation. The Company, at its discretion, may make additional contributions, also subject to IRC limitations. Due to the weak economy, the Company suspended making discretionary matching contributions in February 2009, but reinstated matching contributions in September of 2010. For the years ended December 31, 2010, 2009 and 2008 the Company made 401(k) Plan contributions of approximately $219,000, $112,000 and $578,000, respectively.
 
Note 22. Subsequent Events
 
At December 31, 2010, the Company had a $1.05 million equity investment in Quickparts.com, Inc. (“Quickparts”), a manufacturing services company that provides customers with an online e-commerce system to procure low-volume and high-volume custom manufactured parts. This equity investment represented an 8.86% ownership interest in Quickparts and was accounted for under the cost method of accounting under ASC 325-20, Cost Method Investments. During February 2011, a third party acquired all of the outstanding stock of Quickparts. In connection with that sale, the Company received an initial payment of $1.7 million. Remaining payments of approximately $660,000 due to the Company over the ensuing 18 months are contingent upon satisfaction of certain indemnification obligations of the sellers, including the Company.
 
Note 23. Quarterly Results (unaudited)
 
    First   Second   Third   Fourth
        Quarter       Quarter       Quarter       Quarter
2010                          
Net sales   $ 23,006,319     $ 30,059,496   $ 30,258,549   $ 33,774,921
Gross profit     9,420,075       14,762,004     14,708,988     17,194,901
Net income (loss)     (443,101 )     2,332,155     3,175,550     4,304,936
Net income (loss) per common                          
       share:                          
              Basic   $ (0.02 )   $ 0.11   $ 0.15   $ 0.21
              Diluted     (0.02 )     0.11     0.15     0.20
                           
2009                          
Net sales   $       23,144,801     $       24,648,277   $       24,329,396   $       26,233,758
Gross profit     9,572,352       11,573,221     11,868,254     13,369,745
Net income (loss)     (703,929 )     849,571     1,578,800     2,391,829
Net income (loss) per common                          
       share:                          
              Basic   $ (0.03 )   $ 0.04   $ 0.08   $ 0.12
              Diluted     (0.03 )     0.04     0.08     0.12

F-32
 

 

SCHEDULE II
VALUATION AND QUALIFYING ACCOUNTS AND RESERVES

Years ended December 31, 2010, 2009, and 2008                          
                  
COLUMN A   Column B   Column C - Additions   Column D   Column E
    Balances at   Charged to               Balances
    beginning   costs and   Charged to         at end
Description       of period       expenses       other accounts       Deductions       of period
2010                              
Reserve for bad debts and allowances   $        1,125,112   $        332,363   $ -   $        173,550   $        1,283,925
Reserve for sales returns and other allowances     -     372,811      -     372,811     -
                               
2009                              
Reserve for bad debts and allowances     1,225,606     672,241     -     772,735     1,125,112
Reserve for sales returns and other allowances     121,556     -     -     121,556     -
                               
2008                              
Reserve for bad debts and allowances     1,169,464     441,321     -     385,179     1,225,606
Reserve for sales returns and other allowances     191,006     -     -     69,450     121,556

F-33
 

 

Exhibits
 
  EXHIBIT    
      NO.       DESCRIPTION
    3.1     Restated Certificate of Incorporation of the Company.(8)
                   
    3.2     Amended and Restated By-Laws of the Company.(7)
           
    4.1     Warrant to purchase 500,000 Shares of Common Stock dated January 18, 2010.(10)
           
    10.1     Non-Competition Agreement between the Company and S. Scott Crump, dated October 15, 1990.(1)
           
    10.2     Employee Confidentiality Agreement between the Company and S. Scott Crump, dated October 15, 1990.(1)
           
    10.3     Stratasys, Inc. 1998 Incentive Stock Option Plan.(4)*
           
    10.4     Stratasys, Inc. 2000 Incentive Stock Option Plan.(5)*
           
    10.5     Stratasys, Inc. 2002 Long-Term Performance and Incentive Plan.(6)*
           
    10.6     Stratasys, Inc. 2008 Long-Term Performance and Incentive Plan.(9)*
           
    10.7     Form of Option Agreement for employees.(9)*
           
    10.8     Form of Option Agreement for directors.(9)*
           
    10.9     Assignment, dated October 23, 1989, from S. Scott Crump to the Company with respect to a patent application for an apparatus and method for creating three-dimensional objects.(3)
           
    10.10     Assignment, dated June 5, 1992, from S. Scott Crump to the Company with respect to a patent application for a modeling apparatus for three dimensional objects.(3)
           
    10.11     Assignment, dated June 1, 1994, from S. Scott Crump, James W. Comb, William R. Priedeman, Jr., and Robert Zinniel to the Company with respect to a patent application for a process and apparatus of support removal for three-dimensional modeling.(3)
           
    10.12     Asset Purchase Agreement between the Company and IBM dated January 1, 1995.(2)
           
    10.13     Master OEM Agreement between Hewlett-Packard Company and Stratasys, Inc. dated as of January 18, 2010.(11)**
           
    10.14     Protective Rights Agreement between Stratasys, Inc. and Hewlett-Packard Company dated as of January 18, 2010.(11)
           
    14.1     Code of Business Conduct and Ethics.(9)
           
    21.1     Subsidiaries of the Company.(8)


 

  EXHIBIT    
      NO.       DESCRIPTION
        23.1         Consent of Grant Thornton LLP.(12)
           
    31.1     Certification pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.(12)
           
    31.2     Certification pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.(12)
           
    32.1     Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.(12)
           
    32.2     Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.(12)

  (1)   Incorporated by reference from the Company’s Registration Statement on Form SB-2 (File No. 33- 83638-C) filed September 2, 1994.
   
  (2)   Incorporated by reference from the Company’s Form 8-K, Amendment No. 2, dated January 1, 1995.
   
  (3)   Incorporated by reference from Amendment No. 1 to the Registration Statement on Form SB-2 (File No. 33-99108) filed December 20, 1995.
   
  (4)   Incorporated by reference from the Company’s definitive Proxy Statement on Schedule 14A with respect to the Company’s 1998 Annual Meeting of Stockholders.
   
  (5)   Incorporated by reference from the Company’s Registration Statement on Form S-8 (File No. 333- 32782) filed March 17, 2000.
   
  (6)   Incorporated by reference from the Company’s definitive Proxy Statement on Schedule 14A with respect to the Company’s 2002 Annual Meeting of Stockholders.
   
  (7)   Incorporated by reference from the Company’s Form 8-K filed July 31, 2007.
   
  (8)   Incorporated by reference from the Company’s Form 10-K for the year ended December 31, 2007.
   
  (9)   Incorporated by reference from the Company’s Form 10-K for the year ended December 31, 2008.
   
        (10)         Incorporated by reference from the Company’s Form 8-K filed January 19, 2010.
   
  (11)   Incorporated by reference from the Company’s Form 10-Q for the quarter ended March 31, 2010.
   
  (12)   Filed herewith.
   

*   Compensatory plan or arrangement.
     
**        Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Securities and Exchange Commission pursuant to the Company’s application regarding confidential treatment under Rule 406 of the Securities Act of 1933, as amended, or Rule 24b-2 of the Securities Exchange Act of 1934, as amended.


 

(c) Other required financial statements
 
     All other schedules called for under Regulation S-X are not submitted because they are not applicable or not required, or because the required information is included in the financial statements or notes thereto.
 
     Separate financial statements of the Registrant have been omitted because the Registrant is primarily an operating company. All subsidiaries included in the consolidated financial statements are majority owned, and none of the subsidiaries have indebtedness that is not guaranteed by the Registrant.
 

 

SIGNATURES
 
     Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
STRATASYS, INC.
 
 
By: /s/ S. SCOTT CRUMP
  S. Scott Crump
  President
Dated:      March 8, 2011

    Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
 
/s/ S. SCOTT CRUMP        Chairman of the Board of Directors,         
S. Scott Crump   President, Chief Executive Officer,   March 8, 2011
    Treasurer (Principal Executive Officer)    
         
/s/ ROBERT F. GALLAGHER   Chief Financial Officer (Principal   March 8, 2011
Robert F. Gallagher   Financial and Accounting Officer)    
         
/s/ RALPH E. CRUMP   Director   March 8, 2011
Ralph E. Crump        
         
/s/ EDWARD J. FIERKO   Director   March 8, 2011
Edward J. Fierko        
         
/s/ JOHN J. MCELENEY   Director   March 8, 2010
John J. McEleney        
         
/s/ CLIFFORD H. SCHWIETER   Director   March 8, 2010
Clifford H. Schwieter        
         
/s/ GREGORY L. WILSON   Director   March 8, 2010
Gregory L. Wilson