stratasys_10k.htm


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
 
(Mark One)
[ü] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934
  For the fiscal year ended December 31, 2009
  OR
[   ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934
  For the transition period from _______ to _______

Commission file number 1-13400
 
STRATASYS, INC.
(Exact name of registrant as specified in its charter)
 
Delaware 36-3658792
State or other jurisdiction of (I.R.S. Employer
incorporation or organization Identification No.)
 
7665 Commerce Way, Eden Prairie, Minnesota 55344
(Address of Principal Executive Offices) (Zip Code)
 
Registrant’s telephone number, including area code (952) 937-3000
 
Securities registered pursuant to Section 12(b) of the Act:  
Title of each class Name of each exchange on which registered
Common stock, $.01 par value NASDAQ Global Select Market

Securities registered pursuant section 12(g) of the Act:
None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes [   ] No [ü]
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes [   ] No [ü]
 
     Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for past 90 days. Yes [ü] No [   ]
 
     Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period than the registrant was required to submit and post such files). Yes [   ] No [   ]
 
     Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [ü]
 
     Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
 
Large accelerated filer [   ] Accelerated filer [ü]
Non-accelerated filer [   ] Smaller reporting company [   ]
     (Do not check if a smaller reporting company)
 
     Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [   ] No [ü]
 
     The aggregate market value of the registrant’s Common Stock held by non-affiliates of the registrant as of June 30, 2009, the last business day of the registrant’s most recently completed second quarter, was approximately $206,000,000. On such date, the closing price of the Registrant’s Common Stock, as quoted on the Nasdaq Global Select Market was $10.91.
 
     The registrant had 20,453,277 shares of common stock outstanding as of March 1, 2010.
 


DOCUMENTS INCORPORATED BY REFERENCE
 
     Portions of the registrant’s Definitive Proxy Statement to be filed with the Securities and Exchange Commission with respect to the registrant’s Annual Meeting of Stockholders scheduled to be held on May 6, 2010 are incorporated by reference into Part III of this Annual Report.
 


TABLE OF CONTENTS
 
      Page
Part I
 
Item 1. Business 1
Item 1A. Risk Factors 13
Item 1B. Unresolved Staff Comments 17
Item 2. Properties 17
Item 3. Legal Proceedings 18
Item 4. Reserved 18
 
Part II
 
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer  
Purchases of Equity Securities 19
Item 6. Selected Financial Data 21
Item 7. Management’s Discussion and Analysis of Financial Condition and
Results of Operation 22
Item 7A. Quantitative and Qualitative Disclosures About Market Risk 40
Item 8. Financial Statements and Supplementary Data 40
Item 9. Changes in and Disagreements with Accountants on Accounting and  
Financial Disclosure 40
Item 9A. Controls and Procedures 40
Item 9B. Other Information 41
 
Part III
 
Item 10. Directors, Executive Officers and Corporate Governance 42
Item 11. Executive Compensation 42
Item 12. Security Ownership of Certain Beneficial Owners and Management and  
Related Stockholder Matters 42
Item 13. Certain Relationships and Related Transactions, and Director Independence 42
Item 14. Principal Accountant Fees and Services 42
 
Part IV
 
Item 15. Exhibits and Financial Statement Schedules 43
Signatures  



PART I
 
Item 1. Business.
 
General Development of Business
 
     We are a worldwide leading manufacturer of three-dimensional (“3D”) printers and high-performance rapid prototyping (“RP”) systems for the office-based RP and direct digital manufacturing (“DDM”) markets. Our 3D printers and high-performance RP systems provide 3D computer-aided design (“CAD”) users a fast, office-friendly, and low-cost alternative for building functional 3D parts. We develop, manufacture and sell a broad product line of 3D printers and DDM systems (and related proprietary consumable materials) that create physical models from CAD designs. We also offer rapid prototyping and production part manufacturing services through our centers located in North America, Europe and Australia.
 
     We were incorporated in Delaware in 1989 and our executive offices are located in Eden Prairie, Minnesota. Our systems are based on our core patented fused deposition modeling (“FDM®”) technology and on our patented Genisys® technology, which we purchased from IBM in 1994. We sold our first commercial product in April 1992 and in February 2002, we introduced the first 3D printer in our Dimension® product line. The Dimension line offers modeling capabilities in durable ABS plastic using a desktop 3D printer platform. In May 2007, we began offering high-performance systems that were specifically designed for DDM, which is the production of end use parts and assembly tools. Other recent significant developments in our business are set forth below:
HP has agreed not to sell any other 3D printers manufactured by other companies throughout the world for the term of the Agreement. The term of the Agreement will be extended for additional one-year periods unless terminated on advance notice by either party. During the term of the Agreement, we have agreed not to sell comparable products covered by the Agreement directly or indirectly in the territory covered by the Agreement. The Agreement does not require HP to purchase any minimum quantity of products.
 
We have also entered into a Protective Rights Agreement with HP in which we have agreed to notify HP if (i) the we decide to engage in negotiations in response to an acquisition offer, (ii) we decide to investigate a potential acquisition of our company, or (iii) we become aware of an offer to purchase securities that would result in our acquisition. The Protective Rights Agreement will terminate on the earlier of three months after termination of the Agreement or our acquisition. In connection with the Agreement and the Protective Rights Agreement, we issued a warrant to HP to purchase 500,000 shares of common stock at an exercise price of $17.78 per share, which vests immediately.
 
We expect that the first products will be available to be shipped to HP customers in the first half of 2010. After the initial term, or by mutual agreement, the territory in which HP will have the exclusive right to sell the 3D printers covered by the Agreement may be expanded to additional countries worldwide.
1
 


Description of Business
 
     We develop, manufacture, market, and service a family of 3D printers and 3D Production Systems that enable engineers and designers to create physical models, tooling and prototypes out of plastic and other materials directly from a CAD workstation. Our high-performance systems are used both to create prototype models as well as to produce parts for end-user, or DDM, applications. Our 3D printers and high-performance systems can be used in office environments without expensive facility modification. In many industries, the models and prototypes required in product development are produced laboriously by hand-sculpting or machining, a traditional process that can take days or weeks. Our computerized modeling systems use our proprietary technology to make models and prototypes as well as end-use parts directly from a designer’s 3D CAD in a matter of hours. In addition to selling RP systems and 3D printers, our RedEye paid parts service makes and sells physical models, tooling and prototypes for RP and DDM applications based on our customers’ CAD files. We estimate that approximately 40% of our Fortus high-performance RP systems are used for DDM applications with some frequency.
 
     We believe that the 3D printers and Fortus 3D Production Systems using our FDM technology are the only systems commercially available that can produce prototypes and parts from industry product-grade plastic without relying on lasers. This affords our products a number of significant advantages over other commercially available 3D rapid prototyping technologies that rely primarily on lasers to create models. Such benefits include:
2
 


     Our systems can also run virtually unattended, producing models while designers perform other tasks.
 
     The process involved in the development of a 3D model using our systems begins with the creation of a 3D geometric design on a CAD workstation. The design is then imported into our proprietary software program, which mathematically slices the CAD design into horizontal layers that are automatically downloaded into the system. A spool of thin thermoplastic modeling material feeds into a moving FDM extrusion head, which heats the material to a semi-liquid state. This semi-liquid material is extruded, deposited and bonded, one ultra-thin layer at a time, on a base (the “X-Y Stage”) in a thermally-controlled modeling chamber. As the material is directed into place by the computer-controlled head, layer upon layer, the material bonds and solidifies, creating a precise and strong model.
 
     Based upon data and estimates furnished in the 2009 Wohlers Report, through 2008 we shipped approximately 36% of all RP systems since the industry’s inception in 1987. The 2009 Wohlers Report also states that we shipped 43% of all RP systems globally in 2008 and 50% of all 3D printers shipped globally in 2008.
 
Applications for High-Performance Systems and 3D Printers
 
     Both high-performance systems and 3D printers allow for the physical modeling of a design using a special class of machine technology. These systems take data created from CAD data, CT and MRI scan data or 3D digitized data to quickly produce models, using an additive approach. Traditionally, RP and 3D printing have been used by organizations to accelerate product development. Many companies use RP and 3D printing models to test form, fit and function to help improve the time to market.
 
     Frequently, users report rapid pay-back times by using RP and 3D printing, as they accelerate their product development cycle and reduce post-design flaws through more extensive design verification and testing.
 
     We also have opportunities for DDM. DDM involves the use of our systems for the direct manufacture of parts that are subsequently incorporated into the user’s end product or process. DDM is particularly attractive in applications that require short-run or low-volume parts that require rapid turn-around, and for which tooling would not be appropriate due to small volumes. Our Fortus 360mc, 400mc, and 900mc systems are well suited for these types of applications.
 
     An emerging portion of the DDM market segment is the production of manufacturing tools that aid in the customer’s production and assembly process. We believe this fabrication and assembly tool market is substantially larger than the $1.2 billion additive fabrication market that we currently serve. In addition, we have seen a growing number of applications for end-use parts.
 
     During the past five years, the largest growth segment of the additive fabrication market has been 3D printers. 3D printers are low-cost RP systems (typically under $40,000) that reside in the design/engineering office environment, allowing product development organizations quick access to a modeling system.
 
     We have shipped over 13,000 systems since our inception. A wide variety of design and manufacturing organizations use our systems. Current markets and applications include:
 
  • Aerospace
     
  • Consumer Products
     
  • Educational Institutions
     
  • Medical Systems
     
  • Mold Making
     
  • Direct digital manufacturing of custom parts 
     
  • Heavy Equipment
     
        
  • Automotive
     
  • Business Machines
     
  • Electronics
     
  • Medical Analysis
     
  • Tooling
     
  • Fixtures
     
  • Architecture
     
3
 


     Additional future applications include:
 
  • Free-form graphic design                                 
     
  • Gaming, art and animation
     
       
  • Secondary tooling 
     Among potential medical applications, rapid prototyping is being used to produce accurate models of internal organs, bones and skulls for pre-operative evaluations or modeling of prostheses. In such uses, our RP systems serve as a peripheral device for CT and MRI devices.
 
Products
 
     3D Printers and High-Performance Systems
 
     We have been developing and improving our line of products since our inception in 1989. Since our first commercial product was introduced in 1992, we have enhanced and expanded our product line. We have improved both the speed and the accuracy of our Fortus systems, expanded their build envelopes, introduced a number of new modeling materials and developed and introduced a low-cost 3D printer. We have also enhanced and upgraded the software that our systems use to read CAD files and build parts.
 
     Each of our products is based upon our patented FDM process, and our 3D printers also employ technology acquired from IBM. Our products are sold as integrated systems, consisting of an RP machine, the software to convert the CAD designs into a machine compatible format and modeling and support materials. Each of our products is compatible with an office environment and does not require an operator to be present while it is running.
 
     Our family of 3D printers and high-performance systems affords a customer’s product development team, including engineers, designers and managers, the ability to create prototypes through all stages of the development cycle. Our products meet the needs of a very demanding and diverse industrial base by offering a wide range of capability and price from which to choose. The domestic list prices of our systems range from $14,900 for the uPrint Personal 3D Printer to $400,000 for our high performance Fortus 900mc.
 
     The Dimension line of 3D printers allows users to create parts in ABSplus plastic. ABS usually offers the part strength required for true form, fit and functional testing. Dimension 3D printers operate in an office environment and offer speed, ease of use and networking capabilities at a competitive price. They feature our Catalyst EX® software, which offers a single push-button operation by automating all of the required build procedures. We introduced the uPrint Personal 3D Printer in January 2009 at a list price of $14,900 and expanded this line by releasing the uPrint Plus a year later with a larger build envelop than the uPrint, more features and a slightly higher price. Using Dimension’s proven FDM technology, the uPrint and uPrint Plus build models with Stratasys ABSplus — a material that is on average 40 percent stronger than our standard ABS material, making it ideally suited for testing the form, fit and function of models and prototypes. The Dimension 1200es SST, introduced in January 2008 and priced at $32,900, offers the ability to build larger parts and creates parts from our ABSplus material as well.
 
     The Fortus line of high-performance FDM systems incorporates our WaterWorks soluble support system and InSight Software. The patented WaterWorks process allows for the easy removal of supports from a completed prototype by simple immersion into a water-based solution. Because our support materials dissolve in a solution, most post-processing steps required in our competitors’ systems are not required with our systems. The InSight software used by our Fortus systems offers the customer an array of features that is more flexible than Catalyst EX, ranging from a fully automated build process to one that allows the user to customize each step. With the combination of ABS, WaterWorks and InSight software, the Fortus line offers the customer “hands free” operation of the entire prototype building process.
 
     The Fortus 400mc was introduced in July 2007 and represents an increase in repeatability, part accuracy and material strength over the Maxum, Vantage and Titan systems, which have been discontinued. In addition, in January 2008, we introduced the Fortus 360mc, which offers similar part quality to the Fortus 400mc, but fewer material choices and slower build speeds. Both of these systems can be configured to meet specific customer needs. Prices for these systems range from $75,000 to $225,000 depending on the configuration and needs of the customer.
 
4
 


     In December 2007, we introduced the Fortus 900mc, which represents our largest system ever. It is capable of building parts up to 4.5 feet measured on the diagonal, nine times larger than parts built by the Fortus 400mc. The Fortus 900mc uses ball-screw technology, which improves part accuracy, positional repeatability and tolerances. This new product is the direct result of a $3.6 million order from a Fortune 500 global manufacturing company entered into in September 2005 to advance our proprietary FDM® technology for direct digital manufacturing applications.
 
     We periodically discontinue manufacturing older products. We discontinued the Prodigy Plus system in 2007, the Vantage and Titan systems during 2008, and the Fortus 200mc and Maxum systems during 2009. Although we have discontinued the manufacture of these systems, we continue to provide service support in the field.
 
     Part Build Material
 
     We believe that FDM technology allows the use of a greater variety of production grade thermoplastic building materials than other RP technologies. We continue to develop filament modeling materials that meet our customers’ needs for increased speed, strength, accuracy, surface resolution, chemical and heat resistance, and color. These materials are processed into our patented filament form, which is then fed into the FDM systems. Our spool-based system has proven to be a significant advantage for our products over ultraviolet (“UV”) polymer systems or powder based systems, because our system allows the user to quickly change material by simply mounting the spool and feeding the desired filament into the FDM devices. Spools weigh from one pound to ten pounds, and the creation of a model may require from 0.1 pound to more than one pound of filament. The spool-based system also compares favorably with stereo lithography (“SLA”) UV polymer systems, because the spool-based system allows the customer to use it in an office environment and to purchase a single spool, as compared to an entire vat of SLA UV polymer, thereby reducing the customer’s up-front costs.
 
     Currently, we have nine modeling materials commercially available for use with our FDM technology:
5
 


     In addition to the modeling materials, we offer a proprietary water-soluble material, WaterWorks, used for support during the build process, which is later dissolved from the finished part. Other proprietary release materials are used for support and are removed from the final model by hand.
 
     Each material has specific characteristics that make it appropriate for various applications. The ability to use different materials allows the user to match the material to the end use application of the prototype, whether it is a pattern for tooling, a concept model, a functional prototype, a DDM manufacturing tool, or a DDM end use part. ABS and ABSplus are also offered in numerous colors, including white, black, red, blue, yellow, olive, nectarine and dark grey. We also offer a service to create custom colors for unique customer needs.
 
     The modeling and support filament used in the RP and DDM systems and 3D printers that we sell are consumable products that generate recurring revenue.
 
     Operating Software
 
     Our high-performance systems and 3D printers use one of two software products that convert the three-dimensional CAD databases into the appropriate code to operate our FDM system. The software products also provide a wide range of features, including automatic support generation, part scaling, positioning and nesting, as well as geometric editing capabilities. The software is not sold as a stand-alone product.
 
     Catalyst EX, our entry-level software product, enables users to build prototype parts at the push of a button. It was introduced in 2000 and is used on Dimension 1200es SST and BST, Dimension Elite, Dimension 768 BST and SST, and uPrint.
 
     Our InSight preprocessing software is used on the remainder of our Fortus products – Fortus 360mc, 400mc, and 900mc. It increases build speed and improves the design engineer’s control and efficiency over the entire build process. It has a broad set of features that facilitate the demanding applications ranging from a single “push button” for automatic preprocessing to individual editing and manipulation tools for each process step.
 
     We continuously improve both software products to meet the demands of our sophisticated customers. Our latest software enhancement was the release of Smart Supports, a software feature that reconfigures the way support material is structured in the build process in order to reduce support material usage by as much as 40%. Throughput enhancements, advanced build algorithms and features such as Smart Supports are intended to keep pace with complex industrial geometric designs while saving valuable operator time.
 
Services
 
     Maintenance, Leasing, Training and Contract Engineering
 
     We also provide a number of services in relation to our rapid prototyping business. We provide maintenance to our customers under our standard warranties and separate maintenance contracts. In the United States, we lease or rent Fortus 3D Production Systems and Dimension 3D printers under operating agreements to customers that do not desire to purchase them or enter into sales-type leases. We offer training to our customers, particularly on our high-performance systems. Finally, from time to time we offer contract engineering services to third parties in connection with the strategic development of our systems and services incorporating our proprietary technology.
 
     RedEye Paid Parts
 
     Our RedEye paid parts service offers customers the ability to purchase prototypes and end-use parts that we make for them from CAD files that they provide to us. We have a facility near our corporate headquarters dedicated to RedEye operations. Our RedEye on Demand website service, www.redeyeondemand.com, enables our customers to obtain quotes and order parts around the clock, seven days a week. RedEye on Demand offers unmatched expertise and production capacity using the latest in proven rapid prototyping and direct digital manufacturing technologies and processes.
 
6
 


Marketing, Distribution and Customers
 
     Marketing and Customers
 
     The focus of our marketing begins with the identification of customer needs. We feature a broad array of products that allow us to meet the precise needs of engineers, designers, educators, marketers and manufacturers. Our products range from uPrint, priced at $14,900, to a high productivity Fortus 900mc, priced up to $400,000. We currently offer eight systems between these price points meeting a variety of material, size and performance criteria.
 
     We have sold systems to the following representative customers:
 
  • Boeing
     
  • BMW
     
  • Dell
     
  • Ford Motor Company
     
  • Graco
     
  • Harley Davidson
     
  • Hewlett Packard
     
  • Honda
     
  • Hyundai
     
  • Intel
     
  • Lego
     
  • Lever
     
  • Lockheed Martin
     
  • Medtronic-Sofamar Danek
     
  • Mitsubishi Electronics
     
  • NASA
     
  • Nike
     
  • Pioneer Speaker
     
  • St. Jude Medical
     
  • Toro
     
  • Toyota
     
  • University of Texas
     
  • University of Wisconsin - Madison
     
  • Xerox
     
     No customer accounted for more than 10% of sales in 2009, 2008, or 2007.
 
     We use a variety of tactical marketing methods to reach potential customers:
 
  • Web-based marketing
     
  • Trade magazine articles
     
  • Brochures
     
  • Websites
     
  • Internet blogs
     
  • Press releases
     
  • Industry associations
  • Print advertisements
     
  • Direct mailings
     
  • Trade show demonstrations
     
  • Telemarketing programs
     
  • Broadcast e-mail
     
  • Webinars
     
  • Internet search engines
     
     In addition, we have developed domestic and international on-site demonstration capabilities.
 
     Sales Field Reorganization
 
     Beginning in 2009, we converted the existing Fortus and 3D printing sales organizations to a new structure that is divided into two groups based on geographical areas. The Americas sales organization covers North, Central and South America and the International sales organization covers all other areas of the world. In conjunction with this reorganization, we replaced our Fortus direct sales channel in the United States with a select group of existing resellers as further described below. This reorganization serves to better align our sales and marketing resources with our diverse customer base and, specifically in the United States, more than triples our sales support for high-end systems.
 
7
 


     Americas Sales Organization
 
     The Americas sales organization provides sales support to a network of over 100 reseller locations in North, Central and South America. On January 1, 2009, we began selling our Fortus 3D Production Systems through a select group of North American resellers that had previously distributed only the Dimension 3D printer product line. This sales strategy leverages our success with a network of independent regional resellers that we believe is the strongest sales channel in the industry and is similar to the structure that we have used outside of the Americas for several years. By replacing our Fortus 3D Production Systems direct sales channel with our existing reseller channel, we have converted a significant portion of our fixed selling costs to a variable cost structure.
 
     International Sales Organization
 
     The International sales organization uses a worldwide network of over 100 resellers to market, sell, and service our 3D printers and Fortus 3D Production Systems. Our International sales organization supports all major regions of the world outside of the Americas including Europe, the Middle East, Korea, Taiwan and China. We also operate international sales and service centers located in Frankfurt, Germany; Bologna, Italy; Bangalore, India; Hong Kong, Japan; and Shanghai, China.
 
     Reseller Network
 
     We use an extensive world-wide reseller network to market, sell and service our 3D printers, Fortus 3D Production Systems, consumable materials, maintenance service contracts and service parts. Almost all of the reseller outlets have 3D Printers available for tradeshows, product demonstrations, and other promotional activities. Many of them also enjoy a long-term presence in their respective territories making this distribution model highly effective relative to a direct sales model. In addition to our 3D Printers and 3D production systems, most resellers also sell and service a third-party 3D solid CAD software package.
 
     The uPrint maintenance and servicing is performed by a third-party service organization or by selected resellers in certain international locations. In 2009, we added a new type of reseller that will resell only the uPrint 3D printer, allowing us to broaden our overall distribution of that product.
 
     In January 2010, we signed a master original equipment manufacturer agreement (the “Agreement”) with Hewlett-Packard (“HP”) to develop and manufacture an HP-branded 3D printer. During the initial term of the Agreement, which expires September 30, 2011, we will manufacture a line of FDM (“Fused Deposition Modeling”) 3D printers and related accessories and consumables exclusively for HP for resale under the HP brand in France, Germany, Italy, Spain and the United Kingdom.
 
     HP has agreed not to sell 3D printers manufactured themselves or any other 3D printers manufactured by other companies throughout the world for the term of the Agreement. The term of the Agreement will be extended for additional one-year periods unless terminated on advance notice by either party. During the term of the Agreement, we have agreed not to sell comparable products covered by the Agreement directly or indirectly in the territory covered by the Agreement. The Agreement does not require HP to purchase any minimum quantity of products.
 
     We expect that the first products will be available to be shipped to HP customers in the first half of 2010. After the initial term, or by mutual agreement, the territory in which HP will have the exclusive right to sell the 3D printers covered by the Agreement may be expanded to additional countries worldwide. Ultimately, our mutual intention is for HP to sell our 3D printers globally.
 
     RedEye Paid Parts
 
     In 2006, we established a dedicated internal sales channel to offer our RedEye paid parts services through our RedEye on Demand instant Internet quoting system. This team is responsible for growing our paid parts service and nurturing customers who have RP and DDM part needs. Their objective is to insure the customer has a favorable experience when solving their internal part requirements. Besides a commitment to customer satisfaction, an essential objective of this operation is to increase the number of quality FDM parts in the marketplace, which, in turn, we believe will also support the expansion of our system sales. In 2007, we launched Redeye RPM, later rebranded as Redeye on Demand, in both Europe and Australia. In addition, in February 2008, we launched RedeyeArc.com specifically aimed at serving the architectural market.
 
     In December 2008, we announced that AutoCAD users can order digitally manufactured prototypes and production parts quickly and easily through an on-demand 3D printing capability supported by our RedEye paid parts service. AutoCAD 2009 subscription customers had access to this functionality via a bonus pack. Included in the bonus pack was on-line ordering capability, giving designers and engineers the ability to get instant quotes and place orders from our RedEye paid parts service. AutoCAD 2010 subscription customers continue to have access to this functionality.
 
8
 


     Customer Support
 
     Our Customer Support department provides on-site system installation and maintenance services and remote technical support to users of our products. We offer services on a time and material basis as well as through a number of post-warranty maintenance contracts with varying levels of support and pricing. Our help desk provides technical support via phone, fax, and e-mail to international customers, resellers, and to our field service personnel. We supply a toll-free telephone number that our domestic customers can utilize to request technical assistance, schedule service visits, order parts and supplies, or directly contact a manager within the Customer Support department.
 
     For our high performance systems, we employ a field service organization that performs system installation, basic operation training and maintenance training, and a full range of maintenance and repair services at customer sites. Field representatives have been trained and certified to service all of our products. Representatives are strategically located in regional offices across North America and are equipped with cellular phones and laptop computers. They have secure remote access to a customer service database containing service history and technical documentation to aid in troubleshooting and repairing systems.
 
     Customer Support is represented on all cross-functional product development teams within Stratasys to ensure that products are designed for serviceability and to provide our internal design and engineering departments with feedback on field issues. Failure analysis, corrective action, and continuation engineering efforts are driven by data collected in the field. Ongoing customer support initiatives include development of advanced diagnostic and troubleshooting techniques and comprehensive preventative maintenance programs, an expanded training and certification program for technical personnel, and improved communication between the field and the factory.
 
     The uPrint maintenance and servicing will be performed by a third-party service organization or by selected resellers in certain international locations.
 
     Warranty and Service
 
     We offer a one-year warranty on Fortus 3D Production Systems and uPrint systems worldwide. In addition we offer a one-year warranty on all systems sold internationally and systems sold into the education market domestically. All other domestically sold systems have a 90-day warranty. We also offer annual and multiple-year service and maintenance contracts for our systems. Annual service contracts for our systems are priced from approximately $2,000 to $49,000 per year domestically.
 
Manufacturing
 
     Our manufacturing process consists of assembling systems using purchased components from our proprietary designs and producing consumable filament to be used by our systems. We currently operate on a build-to-forecast basis and obtain all parts used in the manufacturing process either from distributors of standard electrical or mechanical parts or from custom fabricators of our proprietary designs. Our suppliers are measured by on-time performance and quality.
 
     We purchase major component parts for our Fortus 3D Production Systems and 3D printing systems from various outside suppliers, subcontractors and other sources and assemble them in our Minnesota facilities. Our production floor has been organized using demand-flow techniques (“DFT”) in order to maximize efficiency and quality. Using DFT, our production lines are balanced and as capacity constraints arise, we can avoid the requirements of reconfiguring our production floor.
 
     Computer-based Material Requirements Planning (“MRP”) is used for reordering to ensure on-time delivery of forecasted parts. All operators and assemblers are certified and trained on up-to-date assembly and test procedures including Assembly Requirement Documents, which originate in engineering. The assembly process includes semiautomated functional tests of key subassemblies. Key functional characteristics are verified through these tests and the results are stored in a statistical database. At the completion of assembly, we perform a complete power up and final quality tests to ensure the quality of our products before shipment to customers. The complete final quality tests must be run error free before the system can be cleared for shipment. We maintain a history log on all products that shows revision level configuration and a complete history during the manufacturing and test process. All issues on the system during the manufacturing process are logged, tracked and used to make continuous process improvements of our production processes. Other manufacturing strengths that are incorporated into our new designs are the commonality of designs among our different products as well as the incorporation of Six Sigma concepts. Our filament production utilizes Factory Physics® techniques to manage critical buffers of time, capacity and inventory to ensure product availability. We also utilize the “5S” method (Sort, Set-in-order, Shine, Standardize and Sustain) as part of our lean manufacturing initiatives to improve organization and efficiency. Additionally, we recycle many used filament cartridge parts.
 
9
 


     We maintain an inventory of parts to facilitate the timely assembly of products required by the production plan. While most components are available from multiple suppliers, certain components used in our systems and consumables are only available from single or limited sources. We consider these single-source suppliers to be very reliable, but the loss of one of these suppliers could result in the delay of the manufacture and delivery of those materials and compounds. This type of delay could require us to find and re-qualify the product supplied by one or more new vendors. Although we consider our relationships with our suppliers to be good, we continue to develop risk management plans for these critical suppliers.
 
Research, Development and Engineering
 
     We believe that ongoing research, development and engineering efforts are essential to our continued success. Accordingly, our engineering development efforts will continue to focus on improvements to the FDM technology and development of new modeling processes, materials, software, user applications and products. We have devoted significant time and resources to the development of a universally compatible and user-friendly software system. We are committed to designing products using the principles of Six Sigma. We continue to standardize our product platforms, leveraging each new design so that it will result in multiple product offerings that are developed faster and at reduced expense. The Fortus 360mc, 400mc, 900mc, Dimension, and uPrint products as well as the Catalyst and InSight software products are examples of this successful strategic initiative. For the years ended December 31, 2009, 2008 and 2007, our research, development and engineering expenses were approximately $7.7 million, $9.0 million and $7.5 million, respectively.
 
     Our filament development and production operation is located at our facilities in Eden Prairie, MN. We regard the filament formulation and manufacturing process as a trade secret and hold patent claims on filament usage in our products. We purchase raw material plastics for our consumable filament production from various large plastic suppliers.
 
Intellectual Property
 
     We consider our proprietary technology to be material to the development, manufacture, and sale of our products and services and seek to protect our technology through a combination of patents and confidentiality agreements with our employees and others. All patents and patent applications for rapid prototyping processes and apparatuses associated with the Stratasys FDM processes have been assigned to us by their inventors. As part of our purchase of rapid prototyping technology assets from IBM, we were also assigned the rights and title to three patents developed by IBM, which are used in several of our current product lines. We recorded these patents domestically and are in the process of recording them in certain foreign countries. The terms of two of these patents extend until April 12, 2011, and May 17, 2011, while the third patent has expired. The United States patents covering our proprietary FDM technology expire at various times between 2010 and 2030. In total, we currently own over 280 U.S. and international patents and patent applications.
 
     Our registered trademarks include:
 
  • Stratasys
     
  • Xpress 3D
     
  • Stratasys, Inc.
     
  • QuickSlice
  • Dimension BST
     
  • uPrint
     
  • BuildFDM
     
  • FDM
  • Dimension SST
     
  • Catalyst
     
  • Dimension
     
  • Redeye RPM
10
 


     Other trademarks include:
 
  • FDM Maxum
     
  • BASS
     
  • InSight
     
  • Fortus 200mc
     
  • Prodigy Plus
     
  • 3D Plotter
      
  • Fortus
  • FDM Titan
     
  • WaterWorks
     
     
  • Touchworks
     
  • Fortus 360mc
     
  • Prodigy
     
  • AutoGen
     
  • Genisys
  • SupportWorks
     
  • FDM Vantage
     
  • Fortus 900mc
     
  • Fortus 400mc
     
  • Redeye
     
  • FDM Quantum
     
  • Dimension Elite
     Each of the registered trademarks has a duration of 10 years and may be renewed every 10 years while it is in use. Trademark applications have also been filed in Japan and the European Community.
 
We have also registered a number of Internet domain names, including the following:
 
  • Stratasys.com
     
  • BuildFDM.com
     
  • 3Dprinter.com
     
  • Paidparts.com
     
  • Buildpolyjet.com
     
  • Xpress3D.com
  • Dimensionprinting.com
     
  • 3D-fax.com
     
  • webprototypes.com
     
  • buildup.com
     
  • RedeyeARC.com
     
  • printing3D.com
  • RedEyeRPM.com
     
  • DimensionDirect.com
     
  • prototype.com
     
  • webmodeling.com
     
  • Fortus.com
     
  • RedEyeonDemand.com
Backlog
 
     Our total backlog of system orders at December 31, 2009 was approximately $6.3 million, as compared with approximately $2.6 million at December 31, 2008. We estimate that most of our backlog will ship in the first half of 2010.
 
Seasonality
 
     Historically, our results of operations have been subject to seasonal factors. Stronger demand for our products has occurred in our fourth quarter primarily due to our customers’ capital expenditure budget cycles and our sales compensation incentive programs. Our first and third quarters have historically been our weakest quarters. Although the first quarter has been muted in recent years by the successful introduction of new products, it is typically a slow quarter for capital expenditures in general. The third quarter is typically when we see our largest volume of educational related sales, which normally qualify for special discounts as part of our long-term market penetration strategy.
 
Competition
 
     We compete in a marketplace that is still dominated by conventional methods of model-making and prototype development. Machinists and engineers working from blueprints or CAD files and using machining or manual methods generally perform the prototype development and fabrication. We believe that there is currently no other commercial producer of 3D modeling devices that uses a single-step, non-toxic technology similar to our FDM technology. Most of the 3D printing and other RP systems manufactured by our competitors involve additional post-processing steps, such as curing the part after construction of the model or prototype. Our FDM technology does not rely on the laser or light technology used by other commercial manufacturers in the RP industry.
 
11
 


     Our competitors employ a number of different technologies in their RP devices. 3D Systems and CMET use stereo lithography (“SLA”) in their products. 3D Systems and EOS GmbH produce machines that use selective laser sintering (“SLS”) to harden powdered material. Z Corp. uses inkjet technology to bond powdered materials such as starch. Solidscape, 3D Systems and Objet Geometries have developed prototyping systems that use inkjet technology to deposit resin material layer by layer. A smoothing or milling process is often required between each deposited layer to maintain accuracy in these processes, which reduces material yields. Envisiontec utilizes a photopolymer mask and a light process to build models and Solido uses a plastic sheet lamination technique. We believe that our FDM technology has important advantages over our competitors’ products. These advantages include:
     Based on data and estimates presented in the 2009 Wohlers Report, in 2008 we shipped more units globally than any other company in the RP industry, and we were the second largest in terms of revenue. Wohlers reports that we shipped 43% of total units shipped in the industry in 2008. We believe that this trend continued in 2009 as well.
 
Employees
 
     As of March 1, 2010, we had 361 full-time employees and 42 contractors or temporary employees. While we have separate internal departments, such as manufacturing, marketing, engineering and sales, many employees perform overlapping functions within the organization. No employee is represented by a union, and we have not experienced any work stoppages. We believe our employee relations are good.
 
Governmental Regulation
 
     We are subject to various local, state and federal laws, regulations and agencies that affect businesses generally. These include:
Environmental Regulation
 
     In the European marketplace, electrical and electronic equipment is required to comply with the Directive on Waste Electrical and Electronic Equipment (“WEEE”) and the Directive on Restriction of Use of Certain Hazardous Substances (“RoHS”). WEEE aims to prevent waste by encouraging reuse and recycling and RoHS restricts the use of six hazardous substances in electrical and electronic products. Our products and certain components of such products “put on the market” in the EU (whether or not manufactured in the EU) are potentially subject to WEEE and RoHS. We are actively monitoring the development of such directives and believe we are well positioned to comply with such directives in the required time frames.
 
Available Information
 
     We file annual, quarterly and current reports, proxy statements and other information with the Securities and Exchange Commission. You may read and copy any document we file at the SEC’s public reference room at 100 F Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 for information on the public reference room. The SEC maintains a website that contains annual, quarterly and current reports, proxy statements and other information that issuers (including Stratasys) file electronically with the SEC. The SEC’s website is www.sec.gov.
 
12
 


     Our website is www.stratasys.com. We make available free of charge through our Internet site, via a link to the SEC’s website at www.sec.gov, our annual reports on Form 10-K; quarterly reports on Form 10-Q; current reports on Form 8-K; Forms 3, 4 and 5 filed on behalf of our directors and executive officers; and any amendments to those reports filed or furnished pursuant to the Securities Exchange Act of 1934 as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC.
 
     We make available on www.stratasys.com our most recent annual report on Form 10-K, our quarterly reports on Form 10-Q for the current fiscal year and our most recent proxy statement, although in some cases these documents are not available on our site as soon as they are available on the SEC’s site. You will need to have on your computer the Adobe Acrobat Reader software to view these documents, which are in PDF format. If you do not have Adobe Acrobat, a link to Adobe’s Internet site, from which you can download the software, is provided. The information on our website is not incorporated by reference into this report.
 
Financial Information About Operations In the United States and Other Countries
 
     The information required by this item is incorporated by reference to our Financial Statements included elsewhere in this report. (See Part IV, Item 15, Note 19.)
 
Item 1A. Risk Factors.
 
     Many of the factors that affect our business and operations involve risk and uncertainty. The following describes the principal risks affecting us and our business. Additional risks and uncertainties, not presently known to us or currently deemed material, could negatively impact our results of operations or financial condition in the future.
 
We may not be able to introduce new high-performance systems and 3D printing systems and materials acceptable to the market or to improve the technology and software used in our current systems.
 
     Our ability to compete in the high-performance and 3D printing market depends, in large part, on our success in enhancing our existing product lines and in developing new products. Even if we successfully enhance existing systems or create new systems, it is likely that new systems and technologies that we develop will eventually supplant our existing systems or our competitors will create systems that will replace ours. The RP industry is subject to rapid and substantial innovation and technological change. We may be unsuccessful at enhancing existing systems or developing new systems or materials on a timely basis, and any of our products may be rendered obsolete or uneconomical by our or others’ technological advances.
 
If the 3D printing market does not continue to accept our systems, or if our Fortus high-performance systems do not meet the needs for DDM applications, our revenues may stagnate or decline.
 
     We derive a substantial portion of our sales from the sale of 3D printers and Fortus 3D Production Systems. If the market for 3D printers or 3D production systems declines or if competitors introduce products that compete successfully against ours, we may not be able to sustain the sales of those products. If that happens, our revenues may not increase and could decline.
 
If we are unable to maintain revenues and gross margins from sales of our existing products, our profitability will be adversely affected.
 
     Our current strategy is to attempt to manage the prices of our high-performance systems and 3D printers to expand the market and increase sales. In conjunction with that strategy, we are constantly seeking to reduce our direct manufacturing costs as well. Our engineering and selling, general and administrative expenses, however, generally do not vary substantially in relation to our sales. Accordingly, if our strategy is successful and we increase our revenues while maintaining our gross margins, our operating profits generally will increase faster as a percentage of revenues than the percentage increase in revenues. Conversely, if our revenues or gross margins decline, our operating profits generally will decline faster than the decline in revenues or gross margins. Therefore, declines in our revenues may lead to disproportionate reductions in our operating profits.
 
Hewlett-Packard may not expand distribution under our OEM Agreement beyond its initial territory of five European countries, and the OEM Agreement may not continue beyond its initial term ending on September 30, 2011.
 
     Our Agreement with HP has an initial term that ends on September 30, 2011, and has an initial territory of five European countries.  There can be no assurance that HP will expand the territory in which they sell our 3D printers and other products.  Furthermore, even though the Agreement will automatically be renewed for one-year terms unless either party terminates it on advance written notice, there can be no assurance that the Agreement will continue beyond its initial term or any renewal term.  If HP does not expand the territory or the Agreement is terminated, we will not achieve the anticipated benefits of entering into the Agreement, which include substantial additional revenue and profits as well as validation of our products in the market place.
 
Since we will be selling our 3D printers and related products to HP on an OEM basis, our margins on those products will be lower than those on the products that we presently sell, which may reduce our overall profitability.
 
     HP will be selling our 3D printers and related products through its own reseller network.  Accordingly, the prices we charge to HP for those products will be less than the prices we presently charge to our own reseller network.  As a result, our margins will be smaller on our sales to HP.  We intend to compensate for these smaller margins by expanding the market for our 3D printers, thereby substantially increasing the number of 3D printers sold and our overall revenues and profits. However, there can be no assurance that we will be able to increase our revenue sufficiently to maintain or increase our profitability.
 
13
 


If our present single or limited source suppliers become inadequate, our results of operations and financial condition may be adversely affected.
 
     We maintain an inventory of most of our necessary supplies, which facilitates the assembly of products required for production. While most components are available from multiple suppliers, certain components used in our systems and consumables are only available from single or limited sources. Should our present single or limited source suppliers become inadequate, we would be required to spend a significant amount of time and money researching alternate sources. We consider these suppliers to be very reliable. Although we believe we maintain adequate inventories of vendor-specific materials, the loss of a supplier of such vendor-specific materials or compounds could result in the delay in the manufacture and delivery of those materials and compounds. The delay could require us to find an alternate source, which would require us to re-qualify the product supplied by one or more new vendors. The loss of a single or limited source supplier could adversely affect our results of operations and financial condition.
 
If other manufacturers were to successfully develop and market consumables for use in our systems, our revenues and profits could be adversely affected.
 
     We presently sell substantially all of the consumables that our customers use in our systems. However, even though we attempt to protect against replication of our consumables through patents and trade secrets and we provide that our warranties are valid only if customers use consumables that we certify, it is possible that other manufacturers could develop consumables that could be used successfully in our systems. If our customers were to purchase consumables from our competitors, we would lose some of our sales and could be forced to reduce prices, which would impair our overall revenue and profitability.
 
If we fail to grow our RedEye paid parts service as anticipated, our net sales and profitability will be adversely affected.
 
     We are attempting to grow our RedEye paid parts service substantially. To this end, we have made significant infrastructure, technological and sales and marketing investments. These investments include a dedicated facility, increased staffing, use of a substantial number of our Fortus 3D Production Systems exclusively for Paid Parts, and the development and launch of our RedEye on Demand service, which enables customers to obtain quotes for and order parts over the Internet. If our RedEye paid parts service does not generate the level of sales required to support our investment, our net sales and profitability will be adversely affected.
 
A loss of a significant number of our resellers or channel managers would impair our ability to sell our products and services and could result in a reduction of sales and net income.
 
     We sell all of our products through resellers. We rely heavily on these resellers to sell our products to end users in their respective geographic regions. If a significant number of those resellers were to terminate their relationship with us or otherwise fail or refuse to sell our products, we may not be able to find replacements that are as qualified or as successful in selling our products. If we are unable to find qualified and successful replacements, our sales will suffer, which would have a material adverse effect on our net income.
 
We may not be able to adequately protect or enforce our intellectual property rights, which could harm our competitive position.
 
     Our success and future revenue growth will depend, in part, on our ability to protect our intellectual property. We rely primarily on patents, trademarks and trade secrets, as well as non-disclosure agreements and other methods, to protect our proprietary technologies and processes. Despite our efforts to protect our proprietary technologies and processes, it is possible that competitors or other unauthorized third parties may obtain, copy, use or disclose our technologies and processes. We cannot assure you that any of our existing or future patents will not be challenged, invalidated or circumvented. As such, any rights granted under these patents may not provide us with meaningful protection. We may not be able to obtain foreign patents or pending applications corresponding to our U.S. patent applications. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. If our patents do not adequately protect our technology, our competitors may be able to offer products similar to ours.
 
14
 


Our competitors may also be able to develop similar technology independently or design around our patents. Any of the foregoing events would lead to increased competition and lower revenue or gross margins, which would adversely affect our net income.
 
If our intangible assets become impaired, we may be required to record a significant charge to earnings.
 
     As of December 31, 2009, the net book value of our intangible assets was approximately $7.7 million. Accounting rules require us to take a charge against our earnings to the extent that any of these intangible assets are impaired. Accordingly, invalidation of our patents, trademarks or other intellectual property or the impairment of other intangible assets due to litigation, obsolescence, competitive factors or other reasons could result in a material charge against our earnings and have a material adverse effect on our results of operations.
 
If our investments become impaired, we may be required to record a significant charge to earnings.
 
     Our investments include tax-free Auction Rate Securities (ARS) and municipal government bonds, all of which are insured. Given the current volatility in interest rates and the potential impact of higher interest rates on the issuers of these securities, a significant increase in interest rates could impair the ability of one or more issuers to pay interest on, or principal of, these obligations. Defaults by these issuers or their insurers could cause an impairment of the value of our investments, resulting in a charge against our earnings. Any such charge could have a material adverse effect on our results of operations.
 
We operate a global business that exposes us to additional risks.
 
     Our sales outside of the United States accounted for approximately 44% of our consolidated net sales in 2009. We continue to expand into international markets. The future growth and profitability of our foreign market is subject to a variety of risks and uncertainties. Any of the following factors could adversely affect our sales to customers located outside of the United States:
Our operating results and financial condition may fluctuate.
 
     Our operating results and financial condition may fluctuate from quarter-to-quarter and year-to-year and are likely to continue to vary due to a number of factors, many of which are not within our control. If our operating results do not meet the expectations of securities analysts or investors, who may derive their expectations by extrapolating data from recent historical operating results, the market price of our common stock will likely decline. Fluctuations in our operating results and financial condition may be due to a number of factors, including, but not limited to, those listed below and those identified throughout this “Risk Factors” section:
15
 


Due to all of the foregoing factors, and the other risks discussed in this report, you should not rely on quarter-to-quarter comparisons of our operating results as an indicator of future performance.
 
Default in payment by one or more resellers that have large account receivable balances could adversely impact our results of operations and financial condition.
 
     From time to time, accounts receivable balances have been concentrated with certain resellers. Default by one or more of these resellers or customers could result in a significant charge against our current reported earnings. We have reviewed our policies that govern credit and collections, and will continue to monitor them in light of current payment status and economic conditions. Default by one or more of these resellers would result in a significant charge against our earnings and adversely affect our results of operations and financial condition.
 
If we are unable to retain our key operating personnel and attract additional skilled operating personnel, our development of new products will be delayed and our personnel costs will increase.
 
     Our growth plans require us to retain key employees in, and to hire additional skilled employees for, our operating departments, such as engineering and computer programming, to enhance existing products and develop new products. Our inability to retain and hire key engineers and other employees could have the effect of delaying our development and introduction of new products, which would adversely affect our revenues. In addition, a possible shortage of such personnel in the Minneapolis region could require us to pay more to retain and hire such employees, thereby increasing our costs.
 
Our common stock price has been and may continue to be highly volatile.
 
     During 2009, our common stock traded at prices ranging between $7.70 and $18.98. Investors may have difficulty selling our common stock following periods of volatility, because of the market’s adverse reaction to such volatility. Factors that we believe have caused or may cause this volatility include, among other things:
     Many of these factors are beyond our control. These factors may have a material adverse affect on the market price of our common stock, regardless of our operating performance.
 
If our internal controls over financial reporting do not comply with the requirements of the Sarbanes-Oxley Act, our business and stock price could be adversely affected.
 
     Section 404 of the Sarbanes-Oxley Act of 2002 requires us to evaluate the effectiveness of our internal controls over financial reporting as of the end of each year, and to include a management report assessing the effectiveness of our internal controls over financial reporting in all annual reports. Section 404 also requires our independent registered public accounting firm to report on the effectiveness of our internal controls over financial reporting.
 
16
 


     Our management, including our CEO and CFO, does not expect that our internal controls over financial reporting will prevent all error and fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, involving Stratasys have been, or will be detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and we cannot assure you that any design will succeed in achieving its stated goals under all potential future conditions. Over time, our controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
 
     Although our management has determined, and our independent registered public accounting firm has concluded in its audit, that our internal controls over financial reporting were effective as of December 31, 2009, we cannot assure you that our independent registered accounting firm will not identify a material weakness in our internal controls in the future. A material weakness in our internal controls over financial reporting would require management and our independent registered public accounting firm to evaluate our internal controls as ineffective. If our internal controls over financial reporting are not considered adequate, we may experience a loss of public confidence, which could have an adverse effect on our business and our stock price.
 
     The foregoing list is not exhaustive. There can be no assurance that we have correctly identified and appropriately assessed all factors affecting our business or that the publicly available and other information with respect to these matters is complete and correct. Additional risks and uncertainties not presently known to us or that we currently believe to be immaterial also may adversely impact our business. Should any risks or uncertainties develop into actual events, these developments could have material adverse effects on our business, financial condition, and results of operations.
 
     We assume no obligation (and specifically disclaim any such obligation) to update these Risk Factors or any other forward-looking statements contained in this Annual Report to reflect actual results, changes in assumptions or other factors affecting such forward-looking statements.
 
Item 1B. Unresolved Staff Comments.
 
     None.
 
Item 2. Properties.
 
     Our executive offices and production facilities presently comprise approximately 198,000 available square feet in three buildings in Eden Prairie, Minnesota, near Minneapolis.
 
     On August 1, 2001, we purchased our Eden Prairie manufacturing facility and land for approximately $3.0 million. The facility consists of 62,100 square feet, and is used for machine assembly, inventory storage, operations and sales support.
 
     In March 2004, we purchased an additional 43,900 square foot manufacturing facility for approximately $1.2 million. The facility is located near our manufacturing facility in Eden Prairie, Minnesota, and is used for our RedEye paid parts service.
 
     In November 2005, we purchased an additional 91,800 square foot manufacturing facility for approximately $5.1 million. By the end of 2008, we had substantially completed the improvements needed to make this facility suitable for our specific usage and had spent approximately $3.3 million. This facility is used for R&D, administrative, marketing and sales activities and is adjacent to our manufacturing facility in Eden Prairie, Minnesota. We expect it to accommodate our intermediate expansion requirements.
 
17
 


     We occupy a 40,835 square foot warehouse in Eden Prairie, Minnesota, for shipping and storage under a lease that expires in March 2012. We also occupy a 9,070 square foot facility in Minneapolis, Minnesota, for research and development under a lease that expires in September 2012. We are also responsible for real estate taxes, insurance, utilities, trash removal, and maintenance expenses at these facilities.
 
     We have two North American sales offices and one service office. We occupy 2,700 square feet of space in Novi, Michigan, a Detroit suburb, under a lease that expires in July 2010. We also occupy a 2,500 square foot sales office under a lease that expires in August 2011 and a 1,440 square foot service office under a lease that expires in August 2011, both of which are located in Ontario, California. We are also responsible for real estate taxes, insurance, utilities, trash removal, and maintenance expenses at these facilities.
 
     We have four international sales and service offices under lease. Our German subsidiary leases 8,041 square feet of space in Frankfurt, Germany under a lease that expires in June 2011. Our Italian subsidiary leases 1,300 square feet in Bologna, Italy under a lease that expires in December 2010. We occupy a 500 square foot sales office located in Hong Kong under a lease that expires in March 2011. We have a 1,100 square foot sales office in Bangalore, India, under a lease that expired in January 2010. We continue to occupy the space while we proceed with negotiations for a lease extension and believe that we will be able to renew the lease.
 
Item 3. Legal Proceedings.
 
     We are party to various legal matters, the outcome of which, in the opinion of management, will not have a material adverse effect on the Company’s financial position.
 
Item 4. Reserved.
 
18
 


PART II
 
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
 
Market Information
 
     Our common stock is traded on the Nasdaq Global Select Market under the symbol SSYS.
 
     The following table sets forth the high and low closing sale prices of our common stock for each quarter from January 1, 2008 through the fiscal year ended December 31, 2009 reported on the Nasdaq Global Select Market.
 
     High      Low
Closing Sale Prices
Fiscal Year Ended December 31, 2008
       January 1, 2008 – March 31, 2008   $ 27.32 $ 17.63
       April 1, 2008 – June 30, 2008 22.99 18.46
       July 1, 2008 – September 30, 2008 21.28 15.29
       October 1, 2008 – December 31, 2008 17.71 9.30
 
Fiscal Year Ended December 31, 2009
       January 1, 2009 – March 31, 2009 $      12.70 $ 7.70
       April 1, 2009 – June 30, 2009 13.94 8.60
       July 1, 2009 – September 30, 2009 17.21      10.32
       October 1, 2009 – December 31, 2009 18.98 14.85

Holders
 
     There were approximately 97 record and 7,694 beneficial owners of our common stock as of March 1, 2010.
 
Dividends
 
     We have not paid or declared any cash dividends to date. We intend to retain earnings, if any, to support the growth of our business.
 
19
 


Securities Authorized for Issuance Under Equity Compensation Plans
 
     The following table sets forth the number of securities to be issued upon the exercise of, and the weighted-average exercise price of, outstanding options, warrants and rights, and the number of securities remaining available for future issuance, under our equity compensation plans as of December 31, 2009:
 
Number of securities
Weighted average remaining available for
Number of securities exercise price of future issuance under
to be issued upon outstanding compensation plans
exercise of outstanding options, warrants (excluding securities
     options, warrants and rights      and rights      reflected in column (a))
(a) (b) (c)
Equity compensation plans
approved by security holders 735,478 $     14.49 1,112,366

Note: We do not have any equity compensation plans that have not been approved by security holders.
 
Performance Graph
 
     The following graph compares on a cumulative basis the yearly percentage change, assuming dividend reinvestment, over the last five fiscal years in (a) the total stockholder return on our Common Stock with (b) the total return on the Nasdaq (US) Composite Index, and (c) the total return on the information technology sector of the Standard & Poor’s SmallCap 600 Index (“S&P 600 Info Tech Index”). The S&P 600 Info Tech Index consists of 125 of the 600 stocks comprising the Standard & Poor’s SmallCap 600 Index, a capitalization-weighted index of domestic stocks chosen for market size, liquidity and industry representation. We are a component company of the S&P 600 Info Tech Index. The following graph assumes that $100 had been invested in each of Stratasys, the Nasdaq (US) Composite Index, and the S&P 600 Info Tech Index on December 31, 2004.
 
 
20
 


Item 6. Selected Financial Data.
 
     The selected consolidated financial data as of and for the five-year period ended December 31, 2009, should be read in conjunction with the Consolidated Financial Statements and related Notes for the year ended December 31, 2009, and the Management’s Discussion and Analysis of Financial Condition and Results of Operations.
 
Years Ended December 31,
(In Thousands, Except Per Share Amounts)
     2009      2008      2007      2006      2005
Statement of Operations Data:
Net sales $ 98,356 $ 124,495 $ 112,243 $ 103,809 $ 82,844
Gross profit 46,384 66,412 59,708 51,441 43,755
Research and development 7,737 8,973 7,465 6,699 6,354
Selling, general and administrative
       expenses 32,823 36,843 33,770 29,105 23,243
Operating income 5,824 20,596 18,473 15,637 14,157
Net income 4,116 13,615 14,324 11,164 10,603
Net income per basic common share 0.20 0.66 0.69 0.55 0.50
Weighted average basic shares
       outstanding 20,236 20,676 20,772 20,240 21,056
Net income per diluted common
       share $ 0.20 $ 0.65 $ 0.66 $ 0.54 $ 0.49
Weighted average diluted shares
       outstanding 20,268 21,079 21,567 20,723 21,489
Balance Sheet Data:
Working capital $ 82,838 $ 63,296 $ 64,100 $ 55,311 $ 47,524
Total assets 153,137 147,743 148,757      118,004      104,680
Long term debt --- --- --- --- ---
Stockholders’ equity $      129,583 $      122,562 $      123,834 $ 97,792 $ 86,269

21
 


Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operation.
 
Introduction
 
     Management’s Discussion and Analysis of Financial Condition and Results of Operations is intended to facilitate an understanding of our business and results of operations. It should be read in conjunction with our Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included elsewhere in this report. All amounts in the following discussions are stated in thousands, except employees, share and per share data, prices for systems, or as otherwise indicated.
 
General
 
     We develop, manufacture, and market a family of 3D printing, rapid prototyping (“RP”) and direct digital manufacturing (“DDM”) systems, which enable engineers and designers to create physical models, tooling, jigs, fixtures, prototypes, and end use parts out of production grade thermoplastic directly from a computer aided design (“CAD”) workstation.
 
     Our Market Strategy
 
     Our strategy in 2009 was three-fold:
22
 


    Description of Current Conditions
 
     Our revenue declined 21.0% in 2009 due primarily to the world-wide economic slow down that took hold in late 2008 and continued to soften demand for our products and services during 2009. The reduction in our revenue from systems, other products and other services was mainly attributable to both lower volume and prices. We shipped 1,918 units in 2009, a decrease of 266 units, or 12.2% from 2,184 in 2008. We also saw a decrease in the average selling price of our systems as a result of our long-term pricing strategy and to a lesser extent, from general market conditions that have resulted from constricted capital spending budgets amongst our customer base. Over the last three years, we believe that we have been the price leaders in the 3D printer market and have followed a strategy of continuing to move down the price elasticity curve as evidenced by our introduction of the uPrint in January 2009. The market environment for our high performance systems, while more competitive than the 3D printing market, has been driven mainly by system and material performance capabilities rather than price.
 
     As our installed base of systems has increased, the capacity to derive an increasing amount of revenue from sales of consumables, maintenance contracts, and other services has also increased. In 2009, total non-system revenue decreased by 6.1% as compared to the prior year due principally to the world-wide economic slow down. The decline in the other products and services revenue categories is closely related to the 34.0% decline in systems sales during 2009. Although a much smaller decline, revenue from our RedEye paid parts service declined due to an aggressive service bureau pricing environment. Revenue from maintenance contracts grew slightly in 2009 as this revenue is less susceptible to the economic environment given that most of it results from contracts signed in prior periods.
 
     Due to the weakness in the world economy, in early 2009 we reevaluated our fixed and variable cost structure in light of current sales expectations. As a result, we took certain cost-saving measures that lowered our fixed costs and curtailed some discretionary spending while maintaining a focus on the key goals and objectives of our long-term strategy. These cost-saving measures resulted in a first quarter charge of approximately $779,000, consisting primarily of severance costs related to a reduction in force. We estimate that these measures had an annualized cost savings of approximately $2.7 million.
 
     Given our strong cash position and no debt, we believe that we have adequate liquidity to fund our growth strategy in 2010. We plan on continuing to make investments in fixed assets, process improvements, information technology (“IT”), and human resource development activities that will be required for future growth. Our expense levels are based in part on our expectations of future sales and we will make adjustments as we consider appropriate. While we have adjusted, and will continue to adjust, our expense levels based on both actual and anticipated sales, fluctuations in sales in a particular period could adversely impact our operating results. Whereas our backlog as of December 31, 2009 was $6.3 million, it would not be sufficient to meet our budgeted sales targets should 2010 system orders further decline beyond the 2009 levels. 
 
23
 


     We expect growth to be largely dependent upon our ability to penetrate new markets and develop and market new RP, DDM and 3D printing systems, materials, applications, and services that meet the needs of our current and prospective customers. Our ability to implement our strategy for 2010 is subject to numerous uncertainties, many of which are described under “Risk Factors,” above, in this Management’s Discussion and Analysis of Financial Condition and Results of Operations and in the section below captioned “Forward Looking Statements and Factors That May Affect Future Results of Operations.” We cannot ensure that our efforts will be successful.
 
Results of Operations
 
     The following table sets forth certain statement of operations data as a percentage of net sales for the periods indicated. All items are included in or derived from our consolidated statement of operations.
 
For the twelve months ended December 31,      2009      2008      2007
Net sales 100.0 % 100.0 % 100.0 %
Cost of sales 52.8 % 46.7 % 46.8 %
Gross profit 47.2 % 53.3 % 53.2 %
Research & development 7.9 % 7.2 % 6.7 %
Selling, general and administrative 33.4 % 29.6 %   30.1 %
Operating income 5.9 % 16.5 % 16.5 %
Other income (expense) 0.4 % 0.1 % 1.7 %
Income before taxes 6.3 % 16.7 % 18.2 %
Income taxes 2.1 % 5.7 % 5.4 %
Net income 4.2 % 10.9 % 12.8 %

Net Sales
 
     Net sales of our products and services for the last three years, as well as the percentage change were as follows:
 
Year-over- Year-over-
     2009      Year Change      2008      Year Change      2007
Products $ 73,210 -26.0 % $ 98,969 10.9 % $ 89,280
Services 25,146 -1.5 % 25,526 11.2 % 22,963
$      98,356 -21.0 % $      124,495 10.9 % $      112,243
 

     Product Revenue
     Revenues derived from products (including systems, consumable materials and other products) decreased $25.8 million in 2009, or 26.0%, as compared to the prior year. The number of systems shipped decreased by 12.2%, or 266 units, to 1,918 as compared to 2,184 units shipped in 2008. This decrease in both revenue and number of systems shipped was primarily attributable to the worldwide economic slowdown that constricted capital spending budgets across all industries. Revenue derived from products decreased at a greater rate than system shipments due to a product mix that favored the lower-priced uPrint. Consumable revenue in 2009 decreased 4.3%, which was a much lower decline as compared to the decline in our system revenue. Consumable revenue is directly related to our installed base and is less susceptible to current market conditions than our revenue from system sales.
 
     During 2008, sales of Fortus systems grew with new product introductions and our focus on new applications within the DDM market. As we increased our installed base of systems in the field, we continued to see solid growth in consumables and maintenance revenue. Our Dimension systems sales were flat in 2008 due to the weak global economy.
 
24
 


     The primary drivers of the 2008 year-over-year growth in proprietary product sales were:
     In 2007 and the beginning of 2008, we discontinued distribution of Eden and Arcam products. We recognized approximately $0.2 million and $4.0 million of distributed sales in 2008 and 2007, respectively. We had no sales of these two distributed products in 2009. Adjusting for the impact of the terminated distributed agreements, net sales of our products and services for 2008 and 2007, and changes in net sales, were as follows:
 
  Year-over-
     2008      2007      Year Change
Products $ 98,782 $ 86,255 14.5 %
Services 25,526 22,002 16.0 %
       Net sales $      124,308 $      108,257 14.8 %
 

     Service Revenue 
     Service revenues predominately consist of the following components: maintenance, RedEye paid parts, and rentals. The 13% decrease in our RedEye paid parts service revenue in 2009 was partially offset by growth in our maintenance contract revenue. In 2008, we saw a 12% increase in our RedEye paid parts service as we continued to invest in reaching customers through trade shows, direct mailings and our RedEye on Demand website, which allows customers to order their parts over the Internet. In addition, in February, 2008 we launched RedEye.arc in an effort to reach the architectural market. Revenues from maintenance services on our proprietary systems saw revenue growth in 2008 of 10% as we continued to increase our installed base of systems.
 
     Revenue by Region 
     
Net sales and the percentage of net sales by region for the last three years, as well as the percentage change were as follows:
 
Year-over- Year-over-
2009 Year Change 2008 Year Change 2007
North America      $ 55,156      56 %      -17.3 %      $ 66,698      54 %      6.7 %      $ 62,525      56 %
Europe 26,309 27 % -29.7 % 37,430 30 % 37.9 % 27,144 24 %
Asia Pacific 15,814 16 % -14.7 % 18,534 15 % -6.4 % 19,806 18 %
Other 1,077 1 % -41.2 % 1,833 1 % -33.8 % 2,768 2 %
$      98,356 100 % -21.0 % $      124,495 100 % 10.9 % $      112,243 100 %
 

     Sales in all regions declined in 2009 due to lower volumes as a result of the economic slow down combined with an overall lower average selling price that resulted primarily from our introduction of the uPrint in January 2009 as part of our strategy of continuing to move down the price elasticity curve.
 
     Revenues in the North America region, accounted for approximately 56% of total revenue in 2009. The slight increase in sales percentage as compared to the prior year was primarily due to the launch of a our newest system, the uPrint, which had an earlier domestic launch than it did internationally.
 
     Revenues outside of North America accounted for approximately 44% of total revenue in 2009. The international decrease was led by lower system volumes in both the high-performance systems as well as 3D Printers, particularly in the first half of 2009.
 
     North American sales grew in 2008 primarily due to significant growth in our high-performance systems, higher maintenance revenue from a growing installed base and continued growth in our RedEye paid parts service. This growth was partially off-set by a $3.8 million decline in distributed product revenue that resulted from the discontinuation of our distributed products agreements in 2007.
 
25
 


     European sales grew dramatically during 2008 as a result of growth in our high-performance systems, expansion of our reseller network and a favorable US Dollar exchange rate through the first three quarters of 2008.
 
     Asia Pacific sales declined in 2008 as a result of weak sales within the Japanese market due to a decrease in overall demand. We believe sales in certain Asia Pacific countries were impacted by weak global economic conditions.
 
     Gross Profit
 
     Gross profit and gross profit as a percentage of sales for our products and services for 2009, 2008 and 2007, as well as the percentage changes in gross profit were as follows:
 
Year-over- Year-over-
     2009      Year Change      2008      Year Change      2007
Products $ 32,285 -37.1 % $ 51,297 5.2 % $ 48,739
Services 14,099 -6.7 % 15,116 37.8 % 10,969
$      46,384 -30.2 % $      66,413 11.2 % $      59,708
 
Percentage of Sales
Products 44.1 % 51.8 % 54.6 %
Services 56.1 % 59.2 % 47.8 %
Total 47.2 % 53.3 % 53.2 %

     Product gross profit decreased by $19.0 million, or 37.1%, to $32.3 million in 2009 as compared with $51.3 million in 2008. This decrease is primarily attributable to lower system revenues. The decrease was also attributable to the launch of our new uPrint system, which has a lower direct margin than our other systems and added to our fixed manufacturing overhead. In 2008, product gross profit increased by $2.6 million, or 5.2%, to $51.3 million in 2008 as compared with $48.7 million in 2007 despite a 10.9% increase in product revenue. Product gross margin as a percentage of sales declined in 2008 due to a less favorable product mix and increased software amortization.
 
     Gross profit from services decreased by 6.7% in 2009. This decrease is primarily attributable to an aggressive pricing environment experienced by our Paid Parts service. In 2008, service gross profit increased primarily from the following:
Operating Expenses
 
     Operating expenses and operating expense as a percentage of sales for 2009, 2008 and 2007, as well as the percentage change in operating expenses, were as follows:
 
Year-over- Year-over-
     2009      Year Change      2008      Year Change      2007
Research and development $ 7,737 -13.8 % $ 8,973 20.2 % $ 7,465
Selling, general & administrative 32,823 -10.9 % 36,843 9.1 % 33,770
$      40,560 -11.5 % $      45,816 11.1 % $      41,235
Percentage of Sales 41.2 % 36.8 % 36.7 %

     Research and development expenses decreased by 13.8% during 2009, as a result of a lower spending due to economic concerns, reduced headcount and higher joint development reimbursements. During 2008, research and development expenses increased by 20.2% as we remained committed to designing new products and materials, reducing costs on existing products, and improving the quality and reliability of all of our platforms. This spending was focused on accelerating our development efforts to address both the 3D printer and DDM market opportunities. Increases were primarily the result of increases in engineering headcount, partially offset by an increase in internally capitalized software. In 2009, 2008 and 2007, capitalized software additions were approximately $1.4 million, $2.1 million and $2.0 million, respectively. 
 
26
 


     In 2008, we satisfied our responsibilities under a three-year, $3.6 million agreement with a Fortune 500 global manufacturing company to jointly advance our proprietary FDM technology for rapid manufacturing applications. This effort was focused around our high-performance systems and resulted in the commercial release of the Fortus 900mc. The agreement entitled us to receive reimbursement payments as we achieved specific milestones stated in the agreement. During 2009, 2008 and 2007, we offset approximately $2.2 million, $0.3 million and $1.0 million, respectively, of R&D expenses with monies received from this customer. Due to the success of this initial arrangement, we are continuing this relationship under similar terms and objectives.
 
     Selling, general and administrative expenses decreased by 10.9% in 2009. This decrease was primarily attributable to: 1) a reduction in our direct sales force in January of 2009, which converted some of our selling expenses to a variable cost structure; 2) additional headcount reductions made in the first quarter of 2009; and 3) a continued effort to lower discretionary spending.
 
     In 2008, selling, general and administrative expenses increased 9.1% due to the growth in sales. These 2008 costs include approximately $545,000 in restructuring charges related to sales strategy for our Fortus high-end systems. Effective January 1, 2009, we began selling Fortus 3D Production Systems through a select group of North American resellers from our established reseller channel, which had previously distributed only the Dimension 3D printer product line. This sales strategy leverages our success with a network of independent regional resellers that we believe is the strongest sales channel in the industry and more than triples our sales support for high-end systems. This restructuring of our sales organization included costs related to workforce reductions, closure of certain leased facilities, rebranding expenses, and other contract termination charges that were recognized in 2008 and were settled during the first quarter of 2009.
 
     In addition, we took certain cost-saving measures in the first quarter of 2009 that lowered fixed costs and curtailed some discretionary spending while maintaining a focus on the key goals and objectives of our long-term strategy. These cost-saving measures resulted in a charge of $779,000 in the first quarter of 2009, consisting primarily of severance costs related to a reduction in workforce. Final severance payments were completed during the third quarter of 2009 and the unused portion of the provision, noted as “adjustments” in the table below, was recorded in income for the current period.
 
     A summary of the activity of these restructuring and other costs recognized in the Statement of Operations caption “Selling, general and administrative” are as follows:
 
Employee- Contract
Related Items Terminations
     and Benefits      and Other      Total
Accrued balance as of December 31, 2008 $ 306,014 $ 66,881 $ 372,895
Expenses incurred 779,000 - 779,000
Cash payments (810,707 )          (66,881 ) (877,588 )
Adjustments        (274,307 ) -      (274,307 )
Accrued balance as of December 31, 2009 $ - $ - $ -

27
 


Operating Income
 
     Operating income and operating income as a percentage of sales for 2009, 2008 and 2007, as well as the percentage change in operating income were as follows:
 
Year-over- Year-over-
     2009      Year Change      2008      Year Change      2007
Operating income $      5,824 -71.7 % $      20,596 11.5 % $      18,473
Percentage of Sales 5.9 % 16.5 % 16.5 %

     Operating income in 2009 declined by $14.8 million, primarily due to the significant drop in revenue, partially offset by reductions of indirect spending. Operating income as a percentage of sales in 2008 remained flat to 2007 but increased in dollar amount due to higher sales volume.
 
Other Income (Expenses)
 
     Other income and other income as a percentage of sales for 2009, 2008 and 2007, as well as the percentage change in operating income were as follows:
 
Year-over- Year-over-
     2009      Year Change      2008      Year Change      2007
Interest income $ 990 -51.4 % $ 2,037 -12.0 % $      2,316
Foreign currency transaction losses, net (233 ) -72.1 % (835 ) 66.0 % (503 )
Other      (398 ) -62.6 %      (1,065 ) -1501.3 % 76
$ 359 162.0 % $ 137 -92.7 % $ 1,889
Percentage of Sales 0.4 % 0.1 % 1.7 %

     While the 2009 cash and investment balance increased over 2008, interest income was lower as a result of a higher percentage of our holdings invested in low-yield government securities.
 
     We invoice sales to certain European distributors in Euros and reported results are therefore subject to fluctuations in the exchange rates of that currency in relation to the United States dollar. Our strategy is to hedge most of our Euro-denominated accounts receivable positions by entering into 30-day foreign currency forward contracts on a month-to-month basis to reduce the risk that our earnings will be adversely affected by changes in currency exchange rates. We do not use derivative financial instruments for speculative or trading purposes.
 
     We will continue to monitor exposure to currency fluctuations. Instruments to hedge risks may include foreign currency forward, swap, and option contracts. These instruments will be used to selectively manage risks, but there can be no assurance that we will be fully protected against material foreign currency fluctuations.
 
     In 2008, our hedging strategy resulted in a larger transaction loss due to the volatility of the US dollar relative to the euro. At December 31, 2009 we had approximately €4.7 million or $6.8 million net in Euro-denominated receivables and a €3.8 million or $5.5 million 30-day forward contract.
 
     Other income (expense) for 2009 includes a $350,000 reduction in the assessed fair value of an equity investment in another company that was considered to be other than temporary. The 2008 amount includes an impairment charge of approximately $1.3 million related to a $2.6 million investment in a Jefferson County, Alabama, municipal bond. In February 2008, the auction for this auction rate security failed and its rating has been reduced from AAA to CCC. With the assistance of outside consultants, we determined this investment has incurred both a temporary and other-than-temporary impairment loss.
 
28
 


Income Taxes
 
     Income taxes and income taxes as a percentage of net income before taxes for 2008 and 2007, as well as the percentage change were as follows:
 
Year-over- Year-over-
     2009      Year Change      2008      Year Change      2007
Income taxes $      2,066 -71.0 % $      7,118 17.9 % $      6,038
As a percent of income before income taxes 33.4 % 34.3 % 29.6 %

     The following is a reconciliation of the 2009 effective income tax rate compared with the 2008 and the 2008 effective income tax rate compared with the 2007 rate:
 
2009 Effective income tax rate 33.4 %
2009 percentage increase in research and development credits 2.8 %
2009 percentage increase in tax contingency reserve (1.5 %)
Other, net (0.4 %)
2008 Effective income tax rate 34.3 %
2007 income tax benefit recognized from prior year
       amendments for state research and development credits (3.7 %)
Other, net (1.0 %)
2007 Effective income tax rate 29.6 %
 

Net Income
 
     Net income and net income as a percentage of sales for 2009, 2008 and 2007, as well as the percentage change in net income were as follows:
 
Year-over- Year-over-
     2009      Year Change      2008      Year Change      2007
Net income $      4,116 -69.8 % $      13,615 -4.9 % $      14,324
Percentage of Sales   4.2 % 10.9 % 12.8 %

     For the reasons cited previously in this management discussion and analysis section, our net income for the year ended December 31, 2009 and 2008 was lower than the previous year.
 
29
 


Liquidity and Capital Resources
 
     A summary of our statement of cash flows for the three years ended December 31, 2009 is as follows:
 
2009       2008       2007
Net income $ 4,116 $ 13,615 $ 14,324
Depreciation and amortization 8,256 7,004 4,974
Stock-based compensation 1,137 1,322 955
Change in working capital and other 11,981 (7,450 ) 916
Net cash provided by operating and other activities 25,490 14,491   21,169
Net cash provided by (used in) investing activities (6,831 ) 13,290            (23,841 )
Net cash provided by (used in) in financing activities 1,583          (15,856 ) 9,321
Effect of exchange rate changes on cash 128     (191 ) 260
Net increase in cash and cash equivalents 20,370 11,734 6,909
Cash and cash equivalents, beginning of year   27,946 16,212 9,303
Cash and cash equivalents, end of year $        48,316 $ 27,946 $ 16,212
  
     Our cash and cash equivalents balance increased by $20.4 million to $48.3 million at December 31, 2009, from $27.9 million at December 31, 2008. The increase is primarily due to $25.5 million of cash flows from operations partially offset by $6.8 million spent for acquisitions of investments, property and equipment, and intangible assets.
 
     The net cash provided by our operating activities over the past three years has amounted to approximately $61.2 million, principally derived from $32.1 million in net income, plus $20.2 million in depreciation and amortization, $3.4 million in stock-based compensation, and $5.4 million attributable to changes in net working capital and other items.
 
     In 2009, the principal source of cash from our operating activities was our net income, as adjusted to exclude the effects of non-cash charges. Our 2009 net accounts receivable balance decreased by $7.3 million as compared to 2008. Although we continue to offer 180-day extended terms to our 3D printer resellers for demo units, we have seen a continued reduction in our days sales outstanding (“DSO”) as a result of increase collection efforts. DSO’s were 68 days in 2009, 78 days in 2008 and 86 days in 2007. We believe that adequate allowances have been established for any collectibility issues in our accounts receivable balance.
 
     For the years ended December 31, 2009, 2008, and 2007, our inventory balances were $14.6 million, $19.9 million, and $12.8 million, respectively. The decrease in inventory from 2008 to 2009 was principally due to increased focus on inventory management and lower overall demand for our product. The increase from 2007 to 2008 was principally due to last time buys for legacy systems, higher finished goods inventory required to support the launch of new products in late 2008 and early 2009, and increased consumable raw material inventory due to strategic buys and to support our increasing installed base.
 
     We have instituted better inventory management, but recognize that we have opportunities to make considerably more improvement in order to reduce overall inventory levels and improve turns. A significant portion of our inventory is dedicated to the fulfillment of our service contract and warranty obligations. As we have introduced new products over the past few years, there are more platforms and models to service than in the past, which increases the requirements to maintain spare parts inventory. With the introduction of these new products, older products have been discontinued, but a certain level of inventory is still required to fulfill our ongoing service contracts. Our procedures for dealing with this inventory are more fully explained in the section below captioned “Critical Accounting Policies.”
 
     Investments in sales-type leases provided cash of $1.3 million in 2009 and used cash of $1.1 million in 2008 and $1.2 million in 2007. In mid-2003 we introduced a U.S. leasing program that was principally designed for the Dimension systems. The program now includes customers in both our 3D printer and our Fortus high-performance system product lines and we plan to continue this leasing program for the foreseeable future.
 
30
 


     Accounts payable and other current accrued liabilities provided cash of $0.5 million and $5.6 million in 2009 and 2007, respectively, and used cash of $2.1 million in 2008. In 2009, the increase was related to the timing of payments for inventory purchases and employee compensation.
 
     Unearned revenue, principally consisting of purchased maintenance contracts and implied maintenance contracts, used cash of $2.1 million in 2009 and provided cash of $1.8 million in 2008 and $1.1 million in 2007. The decrease in the unearned revenue balance in 2009 was due to an increase in warranty periods from 90 days to one year for domestic Fortus systems, thereby reducing the amount of the original sale price that is deferred as an implied maintenance contract.
 
     Our investing activities used cash of $6.8 million in 2009 and $23.8 million in 2007 and provided cash of $13.3 million in 2008. In 2009, the purchase of investments, net of proceeds from sales of investments, used cash of $2.9 million. In 2008, the sale of investments provided approximately $23.9 million in cash from investing activities, whereas purchases of investments, net of proceeds, utilized cash of approximately $10.0 million in 2007.
 
     At December 31, 2009, our investments included:
     The balance sheet caption titled “Long-term investments – available for sale securities” consisted of approximately $1.1 million of a tax-free ARS. This balance represents the current estimated fair value of an ARS issued by Jefferson County, Alabama with a face value of $2.6 million. The investment is part of a multi-billion series of bonds issued by Jefferson County to build its sewer and water treatment system (“system”). The County entered into interest rate swaps to protect itself from rising interest rates, but the swaps proved ineffective and the revenue from the system will not adequately support the higher interest rates. The bond is insured by Financial Guaranty Insurance Company (“FGIC”) and matures in 2042. However, with the collapse of the ARS market, the weakened financial condition of FGIC, and the County’s financial condition, the rating of this ARS has gone from Aaa to Caa3. We have received $25,000 in principal payments on this ARS and no additional principal payments have become due. We have received all scheduled interest payments on this ARS through December 31, 2009. Due to the current financial condition of the County and the absence of an active market for this security, we only record interest income as cash payments are received.
 
     With the assistance of outside consultants, we have reviewed this ARS, including expected cash flows, assessed the credit risk, analyzed and extrapolated yield information on comparable composites, and reviewed independent research from various public sources concerning the ARS market. From that assessment, we concluded that during 2008 it had incurred both a temporary and other-than-temporary impairment and recognized impairments of $195,000 and $1,270,750, respectively. Based upon a reevaluation that occurred in late 2009, a portion of the temporary impairment is now considered other-than-temporary and an additional portion of the net carrying amount has also been considered as impaired on an other-than-temporary basis.
 
     At December 31, 2009, we recorded a $350,000 impairment related to a $1.4 million equity investment that is accounted for under the cost method as prescribed by ASC Topic 325-20 “Cost Method Investments”. During the fourth quarter, we considered the entity’s current and projected decreases in revenue to be an impairment indicator and consequently performed a fair value analysis. The resulting impairment of $350,000 was considered to be other-than-temporary and was recognized as a charge to other income.
 
31
 


     Property and equipment acquisitions totaled $2.3 million, $8.5 million, and $10.2 million in 2009, 2008, and 2007, respectively. Over the three-year period ended December 31, 2009, our principal property and equipment acquisitions were for manufacturing or engineering development equipment, tooling, leasehold improvements, and the acquisition of computer systems and software applications. Payments for intangible assets, including patents and capitalized software, amounted to $1.7 million, $2.4 million and $3.7 million in 2009, 2008, and 2007, respectively.
 
     Proceeds from the exercise of stock options provided cash of $1.6 million, $3.2 million and $8.5 million in 2009, 2008 and 2007, respectively. Financing activity included the repurchase of 1,089,575 shares of common stock for $19.1 million during the year ended December 31, 2008. There were no common stock repurchases during the years ended December 31, 2009 and 2007. As of December 31, 2009, the Company has authorization to repurchase approximately $10.9 million of additional common stock.
 
     For 2010, we expect to use our cash as follows;
     While we believe that the primary source of liquidity during 2010 will be derived from current cash balances and cash flows from operations, we have maintained a line of credit from a financial institution of $1.0 million as of December 31, 2009. The credit line bears interest at defined rates based upon two different indexes and expires in July, 2010. To date, we have not borrowed against this credit facility, but we do expect to renew upon expiration.
 
     Our total current assets amounted to $106.4 million at December 31, 2009, most of which consisted of cash and cash equivalents, investments, inventories and accounts receivable. Total current liabilities amounted to $23.6 million and we have no debt. We estimate that we will spend between approximately $8.0 million and $10.0 million in 2010 for property and equipment. We also estimate that as of December 31, 2009, we had approximately $13.6 million of purchase commitments for inventory from selected vendors. In addition to purchase commitments for inventory, we have future commitments for leased facilities. We intend to finance our purchase commitments from existing cash or from cash flows from operations. The future contractual cash obligations related to these commitments are as follows:
 
Year ending December 31,       Facilities       Inventory       Total
2010   $ 585,000 $ 13,557,000 $ 14,142,000
2011 470,000 -   470,000
2012 130,000   -   130,000
$        1,185,000 $        13,557,000 $        14,742,000
 
     We have no contractual obligations beyond 2012. In addition to the above disclosed contractual obligations, the reserve for tax contingencies was $1.2 million at December 31, 2009. Based on the uncertainties associated with the settlement of these items, we are unable to make reasonably reliable estimates of the period of potential settlements, if any, with taxing authorities.
 
32
 


Inflation
 
     We believe that inflation has not had a material effect on our operations or on our financial condition during the three most recent fiscal years.
 
Foreign Currency Transactions
 
     We invoice sales to certain European distributors in Euros and reported results are therefore subject to fluctuations in the exchange rates of that currency in relation to the United States dollar. Our strategy is to hedge most of our Euro-denominated accounts receivable positions by entering into 30-day foreign currency forward contracts on a month-to-month basis to reduce the risk that our earnings will be adversely affected by changes in currency exchange rates. We do not use derivative financial instruments for speculative or trading purposes. We enter into 30-day foreign currency forward contracts on the last day of each month and therefore the notional value of the contract equals the fair value at the end of the reporting period. As such, there is no related asset or liability or unrealized gains or losses recorded on the Balance Sheet as of the end of the period. All realized gains and losses related to hedging activities are recorded in current period earnings under the Statement of Operations caption “Foreign currency transaction losses, net”.
 
     We hedged between €2.8 million and €5.0 million during the year ended December 31, 2009 and between €2.5 million and €5.1 million during the year ended December 31, 2008 related to accounts receivable that were denominated in Euros. The foreign currency forward contracts resulted in a currency transaction loss of approximately $115,000 for the year ended December 31, 2009 and a gain of approximately $235,000 for the year ended December 31, 2008.
 
     We will continue to monitor exposure to currency fluctuations. Instruments that may be used to hedge future risks may include foreign currency forward, swap, and option contracts. These instruments may be used to selectively manage risks, but there can be no assurance that we will be fully protected against material foreign currency fluctuations.
 
Critical Accounting Policies
 
     We have prepared our consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America. This has required us to make estimates, judgments, and assumptions that affected the amounts we reported. Note 1 of Notes to Consolidated Financial Statements contains the significant accounting principles that we used to prepare our consolidated financial statements.
 
     We have identified several critical accounting policies that required us to make assumptions about matters that were uncertain at the time of our estimates. Had we used different estimates and assumptions, the amounts we recorded could have been significantly different. Additionally, if we had used different assumptions or different conditions existed, our financial condition or results of operations could have been materially different. The critical accounting policies that were affected by the estimates, assumptions, and judgments used in the preparation of our consolidated financial statements are listed below.
 
Revenue Recognition
 
     We derive revenue from sales of 3D printing, rapid prototyping (“RP”) and direct digital manufacturing (“DDM”) systems, consumables, and services. We recognize revenue when (1) persuasive evidence of a final agreement exists, (2) delivery has occurred or services have been rendered, (3) the selling price is fixed or determinable, and (4) collectibility is reasonably assured. Our standard terms are FOB shipping point, and as such most of the revenue from the sale of RP machines and consumables is recognized when shipped. Exceptions to this policy occur only if a customer’s purchase order indicates an alternative term or provides that the equipment sold would be subject to certain contingencies, such as formal acceptance. In these instances, revenues would be recognized only upon satisfying the conditions established by the customer as contained in its purchase order to us. Revenue from sales-type leases for our high-performance systems is recognized at the time of lessee acceptance, which follows installation. Revenue from sales-type leases for our Dimension systems is recognized at the time of shipment, since either the customer or the reseller performs the installation. We recognize revenue from sales-type leases at the net present value of future lease payments. Revenue from operating leases is recognized ratably over the lease period.
 
33
 


     We derive service revenue from sales of maintenance contracts, installation services, training, and our RedEye paid parts service. Service revenue from maintenance contracts is recognized ratably over the term of the contract, typically one to two years. We offer warranty periods ranging from 90 days to one year. On certain sales that require a one-year warranty, the extended warranty is treated for revenue recognition purposes as a maintenance agreement. The fair value of this maintenance agreement is deferred and recognized ratably over the period of the extended warranty as an implied maintenance contract. Installation service revenues are recognized upon completion of the installation. Training revenues are recognized upon completion of the training.
 
     In accordance with ASC 605, Revenue Recognition, when two or more product offerings are contained in a single arrangement, revenue is allocated between the elements based on their relative fair value, provided that each element meets the criteria for treatment as a separate unit of accounting. An item is considered a separate unit of accounting if it has value to the customer on a stand-alone basis and there is objective and reliable evidence of the fair value of the undelivered items. Fair value is generally determined based upon the price charged when the element is sold separately. In the absence of fair value for a delivered element, revenue is allocated first to the fair value of the undelivered elements and then the residual revenue is allocated to the delivered elements. In the absence of fair value for an undelivered element, the arrangement is accounted for as a single unit of accounting, resulting in a delay of revenue recognition for the delivered elements until all undelivered elements have been fulfilled.
 
     Revenues from training and installation are unbundled and are recognized after the services have been performed. Most of our products are sold through distribution channels, with training and installation services offered by the resellers. We do not offer training or installation for our Dimension products. The equipment that we manufacture and sell is subject to factory testing that replicates the conditions under which the customers intend to use the equipment. All of the systems are sold subject to published specifications, and all systems sales involve standard models.
 
     We assess collectibility as part of the revenue recognition process. This assessment includes a number of factors such as an evaluation of the creditworthiness of the customer, past payment history, and current economic conditions. If it is determined that collectibility cannot be reasonably assured, we will decline shipment, request a down payment, or defer recognition of revenue until ultimate collectibility is reasonably assured.
 
     We also record a provision for estimated product returns and allowances in the period in which the related revenue is recorded. This provision against current gross revenue is based principally on historical rates of sales returns, but also factors in changes in the customer base, geographic economic conditions, and changes in the financial conditions of our customers. There was no provision for product returns and allowances at December 31, 2009 and the provision for product returns and allowances was approximately $122,000 as of December 31, 2008.
 
Stock-Based Compensation
 
     We calculate the fair value of stock-based option awards on the date of grant using the Black-Scholes option pricing model. The computation of expected volatility is based on historical volatility from traded options on our stock. The expected option term is calculated in accordance with ASC 718, Compensation – Stock Compensation. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury yield curve in effect at the time of grant. Each of the three factors requires us to use judgment and make estimates in determining the percentages and time periods used for the calculation. If we were to use different percentages or time periods, the fair value of stock-based option awards could be materially different.
 
Allowance for Doubtful Accounts
 
     While we evaluate the collectibility of a sale as part of our revenue recognition process, we must also make judgments regarding the ultimate realization of our accounts receivable. A considerable amount of judgment is required in assessing the realization of these receivables, including the aging of the receivables and the creditworthiness of each customer. We may not be able to accurately and timely predict changes to a customer’s financial condition. If a customer’s financial condition should suddenly deteriorate, calling into question our ability to collect the receivable, our estimates of the realization of our receivables could be adversely affected. We might then have to record additional allowances for doubtful accounts, which could have an adverse effect on our results of operations in the period affected.
 
34
 


     Our allowance for doubtful accounts is adjusted quarterly using two methods. First, our overall reserves are based on a percentage applied to certain aged receivable categories that are predominately based on historical bad debt write-off experience. Then, we make an additional evaluation of overdue customer accounts, for which we specifically reserve. In our evaluation we use a variety of factors, such as past payment history, the current financial condition of the customer, and current economic conditions. We also evaluate our overall concentration risk, which assesses the total amount owed by each customer, regardless of its current status. As of December 31, 2009 and 2008, our allowance for doubtful accounts amounted to $0.9 and $1.0 million, respectively. The decrease in the reserve was primarily due to increased collection efforts and a maturing reseller network.
 
Inventories
 
     Our inventories are recorded at the lower of cost or market, with cost based on a first-in, first-out basis. We periodically assess this inventory for obsolescence and potential excess by reducing the difference between our cost and the estimated market value of the inventory based on assumptions about future demand and historical sales patterns. Our inventories consist of materials and products that are subject to technological obsolescence and competitive market conditions. If market conditions or future demand are less favorable than our current expectations, additional inventory write downs or reserves may be required, which could have an adverse effect on our reported results in the period the adjustments are made. Additionally, engineering or field change orders (“ECO” and “FCO”, respectively) introduced by our engineering group could suddenly create extensive obsolete and/or excess inventory. Although our engineering group considers the estimated effect that an ECO or FCO would have on our inventories, a mandated ECO or FCO could have an immediate adverse affect on our reported financial condition if it they required the use of different materials in either new production or our service inventory.
 
     Some of our inventory is returned to us by our customers and refurbished. This refurbished inventory, once fully repaired and tested, is functionally equivalent to new production and is utilized to satisfy many of our requirements under our warranty and service contracts. Upon receipt of the returned material, this inventory is recorded at a discount from original cost, and further reduced by estimated future refurbishment expense. While we evaluate this service material in the same way as our stock inventory (i.e., we periodically test for obsolescence and excess), this inventory is subject to changing demand that may not be immediately apparent. Adjustments to this service inventory, following an obsolescence or excess review, could have an adverse effect on our reported financial condition in the period when the adjustments are made. We review the requirements for service inventory for discontinued products using the number of active maintenance contracts per product line as the key determinant for inventory levels and composition. A sudden decline in the number of customers renewing service agreements in a particular period could lead to an unanticipated write down of this service inventory for a particular product line.
 
Intangible Assets
 
     Intangible assets are capitalized and amortized over their estimated useful or economic lives using the straight-line method in conformity with ASC 350, Intangibles – Goodwill and Other, as follows:
 
          RP technology 11 years
Capitalized software development costs 3 years
Patents 10 years
Trademarks 5 years

     The costs of software development, including significant product enhancements, incurred subsequent to establishing technological feasibility have been capitalized in accordance with ASC 985-20, Costs of Software to be Sold, Leased or Marketed. Costs incurred prior to establishment of technological feasibility are charged to research and development expense.
 
Income Taxes
 
     We comply with ASC 740, Income Taxes, which requires an asset and liability approach to financial reporting of income taxes. Deferred income tax assets and liabilities are computed for differences between the financial statement and tax basis of assets and liabilities that will result in taxable or deductible amounts in the future, based on enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established, when necessary, to reduce the deferred income tax assets to the amount expected to be realized.
 
35
 


     In accordance with ASC 740, Income Taxes, we take a two-step approach to recognizing and measuring uncertain tax positions (tax contingencies). The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount which is more than 50% likely of being realized upon ultimate settlement. We reevaluate these tax positions quarterly and make adjustments as required.
 
Impairment of Long-Lived Assets
 
     We adhere to ASC 360, Property, Plant, and Equipment, and annually assess the recoverability of the carrying amounts of long-lived assets, including intangible assets, at year-end. An impairment loss would be recognized if expected undiscounted future cash flows are less than the carrying amount of the asset. This loss would be determined by calculating the difference by which the carrying amount of the asset exceeds its fair value. Based on our assessment as of December 31, 2009, no long-lived assets were determined to be impaired.
 
Recently Issued Accounting Pronouncements
 
     In June 2009, the Financial Accounting Standards Board (“FASB”) issued a standard that established the FASB Accounting Standards CodificationTM (“ASC”) and amended the hierarchy of accounting principles generally accepted in the United States of America (U.S. GAAP) such that the ASC became the single source of authoritative nongovernmental U.S. GAAP. The ASC did not change current U.S. GAAP, but was intended to simplify user access to all authoritative U.S. GAAP by providing all the authoritative literature related to a particular topic in one place. All previously existing accounting standard documents were superseded and all other accounting literature not included in the ASC is considered non-authoritative. New accounting standards issued subsequent to June 30, 2009 are communicated by the FASB through Accounting Standards Updates (“ASUs”). This standard did not have an impact on our consolidated results of operations or financial condition. However, throughout the notes to the consolidated financial statements references that were previously made to various former authoritative U.S. GAAP pronouncements have been changed to coincide with the appropriate section of the ASC.
 
     In October 2009, the FASB issued ASU No. 2009-13, Multiple-Deliverable Revenue Arrangements—a consensus of the FASB Emerging Issues Task Force, that provides amendments to the criteria for separating consideration in multiple-deliverable arrangements. As a result of these amendments, multiple-deliverable revenue arrangements will be separated in more circumstances than under existing U.S. GAAP. The ASU does this by establishing a selling price hierarchy for determining the selling price of a deliverable. The selling price used for each deliverable will be based on vendor-specific objective evidence (“VSOE”) if available, third-party evidence if VSOE is not available, or estimated selling price if neither VSOE nor third-party evidence is available. A vendor will be required to determine its best estimate of selling price in a manner that is consistent with that used to determine the price to sell the deliverable on a standalone basis. This ASU also eliminates the residual method of allocation and will require that arrangement consideration be allocated at the inception of the arrangement to all deliverables using the relative selling price method, which allocates any discount in the overall arrangement proportionally to each deliverable based on its relative selling price. Expanded disclosures of qualitative and quantitative information regarding application of the multiple-deliverable revenue arrangement guidance are also required under the ASU. The ASU does not apply to arrangements for which industry specific allocation and measurement guidance exists, such as long-term construction contracts and software transactions. ASU No. 2009-13 is effective for us beginning January 1, 2011. We are currently evaluating the impact of this standard on the consolidated results of operations and financial condition.
 
     In May 2009, the FASB issued a new accounting standard regarding subsequent events. This standard incorporates into authoritative accounting literature certain guidance that already existed within generally accepted auditing standards, with the requirements concerning recognition and disclosure of subsequent events remaining essentially unchanged. This guidance addresses events which occur after the balance sheet date but before the issuance of financial statements. Under the new standard, as under previous practice, an entity must record the effects of subsequent events that provide evidence about conditions that existed at the balance sheet date and must disclose but not record the effects of subsequent events which provide evidence about conditions that did not exist at the balance sheet date. The guidance was effective for fiscal years and interim periods ended after June 15, 2009. We have evaluated any subsequent events through the date of this filing.
 
36
 


     In April 2009, the FASB issued an accounting standard which provides guidance on (1) estimating the fair value of an asset or liability when the volume and level of activity for the asset or liability have significantly declined; and (2) identifying transactions that are not orderly. The standard also amended certain disclosure provisions for fair value measurements and disclosures in ASC 820, Fair Value Measurements and Disclosures, to require, among other things, disclosures in interim periods of the inputs and valuation techniques used to measure fair value as well as disclosure of the hierarchy of the source of underlying fair value information on a disaggregated basis by specific major category of investment. This standard was effective for us prospectively beginning April 1, 2009. The adoption of this standard did not have a material impact on our consolidated results of operations or financial condition.
 
     In April 2009, the FASB issued an accounting standard which modifies the requirements for recognizing other-than-temporarily impaired debt securities and changes the existing impairment model for such securities. The standard also requires additional disclosures for both annual and interim periods with respect to both debt and equity securities. Under the standard, impairment of debt securities will be considered other-than-temporary if an entity (1) intends to sell the security, (2) more likely than not will be required to sell the security before recovering its cost, or (3) does not expect to recover the security’s entire amortized cost basis (even if the entity does not intend to sell). The standard further indicates that, depending on which of the above factor(s) causes the impairment to be considered other-than-temporary, (1) the entire shortfall of the security’s fair value versus its amortized cost basis or (2) only the credit loss portion would be recognized in earnings while the remaining shortfall (if any) would be recorded in other comprehensive income. The standard requires entities to initially apply its provisions to previously other-than-temporarily impaired debt securities existing as of the date of initial adoption by making a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. The cumulative-effect adjustment potentially reclassifies the noncredit portion of a previously other-than-temporarily impaired debt security held as of the date of initial adoption from retained earnings to accumulated other comprehensive income. This standard was effective for us beginning April 1, 2009. The adoption of this standard did not have a material impact on our consolidated results of operations or financial condition.
 
     In April 2009, the FASB issued an accounting standard regarding interim disclosures about fair value of financial instruments. The standard essentially expands the disclosure about fair value of financial instruments that was previously required only annually to also be required for interim period reporting. In addition, the standard requires certain additional disclosures regarding the methods and significant assumptions used to estimate the fair value of financial instruments. This standard was effective for us beginning April 1, 2009 on a prospective basis. The adoption of this standard did not have a material impact on our consolidated results of operations or financial condition.
 
     In April 2008, the FASB issued an accounting standard which amended the list of factors an entity should consider in developing renewal or extension assumptions used in determining the useful life of recognized intangible assets under ASC 350, Intangibles - Goodwill and Other. This new standard applies to (1) intangible assets that are acquired individually or with a group of other assets; and (2) intangible assets acquired in both business combinations and asset acquisitions. Under this standard, entities estimating the useful life of a recognized intangible asset must consider their historical experience in renewing or extending similar arrangements or, in the absence of historical experience, must consider assumptions that market participants would use about renewals or extensions. The guidance was effective for us beginning January 1, 2009 and did not have a material impact on the consolidated results of operations or financial condition.
 
     In March 2008, the FASB issued an accounting standard related to disclosures about derivative instruments and hedging activities in ASC 815, Derivatives and Hedging, which requires additional disclosures about an entity’s strategies and objectives for using derivative instruments, the location and amounts of derivative instruments in an entity’s financial statements, how derivative instruments and related hedged items are accounted for under ASC 815 and how derivative instruments and related hedged items affect its financial position, financial performance, and cash flows. Certain disclosures are also required with respect to derivative features that are credit risk related. The standard was effective for us beginning January 1, 2009 on a prospective basis. The adoption of this standard did not have a material impact on our consolidated results of operations or financial condition.
 
37
 


     In December 2007, the FASB ratified a standard related to accounting for collaborative arrangements which discusses how parties to a collaborative arrangement (that does not establish a legal entity within such arrangement) should account for various activities. The standard indicates that costs incurred and revenues generated from transactions with third parties (i.e. parties outside of the collaborative arrangement) should be reported by the collaborators on the respective line items in their income statements pursuant to ASC 605-45, Principal Agent Considerations. Additionally, the guidance provides that income statement characterization of payments between the participants in a collaborative arrangement should be based upon existing authoritative standards, analogy to such standards if not within their scope, or a reasonable, rational, and consistently applied accounting policy election. The guidance was effective for us beginning January 1, 2009 and was required to be applied retrospectively to all periods presented for collaborative arrangements that existed as of the date of adoption. This adoption did not have a material impact on the consolidated results of operations or financial condition and the required disclosures are provided in Note 14 – Accounting for Collaborative Arrangements.
 
     In September 2006, the FASB issued an accounting standard codified in ASC 820, Fair Value Measurements and Disclosures. This standard established a single definition of fair value and a framework for measuring fair value, set out a fair value hierarchy to be used to classify the source of information used in fair value measurements and required disclosures of assets and liabilities measured at fair value based on their level in the hierarchy. This standard applies under other accounting standards that require or permit fair value measurements. The Company adopted the standard as amended by subsequent FASB standards beginning January 1, 2008 on a prospective basis. One of the amendments deferred the effective date for one year relative to nonfinancial assets and liabilities that are measured at fair value, but are recognized or disclosed at fair value on a nonrecurring basis. This deferral applied to such items as nonfinancial assets and liabilities initially measured at fair value in a business combination (but not measured at fair value in subsequent periods) or nonfinancial long-lived asset groups measured at fair value for an impairment assessment. We adopted these remaining aspects of the fair value measurement standard prospectively beginning January 1, 2009. This adoption did not have a material impact on our consolidated results of operations or financial condition and the disclosures required by it are provided in Note 11 – Fair Value Measurements.
 
38
 


Forward-looking Statements and Factors That May Affect Future Results of Operations
 
     All statements herein that are not historical facts or that include such words as “expects”, “anticipates”, “projects”, “estimates”, “vision”, “could”, “potential”, “planning” or “believes” or similar words constitute forward-looking statements that we deem to be covered by and to qualify for the safe harbor protection covered by the Private Securities Litigation Reform Act of 1995 (the “1995 Act”). Investors and prospective investors in our Company should understand that several factors govern whether any forward-looking statement herein will be or can be achieved. Any one of these factors could cause actual results to differ materially from those projected herein.
 
     These forward-looking statements include the expected increases in net sales of RP, DDM, and 3D printing systems, services and consumables, and our ability to maintain our gross margins on these sales. The forward-looking statements include projected revenue and income in future quarters; the size of the 3D printing market; our objectives for the marketing and sale of our DimensionTM 3D printers and our FortusTM 3D Production Systems, particularly for use in direct digital manufacturing (DDM); the demand for our proprietary consumables; the expansion of our RedEye paid parts service; and our beliefs with respect to the growth in the demand for our products. They include our plans and objectives to introduce new products, to control expenses, to improve the quality and reliability of our systems, to respond to new or existing competitive products, and to improve profitability. The forward-looking statements included herein are based on current expectations that involve a number of risks and uncertainties, some of which are described in Item 1A, “Risk Factors” above. These forward-looking statements are based on assumptions, among others, that we will be able to:
     Assumptions relating to the foregoing involve judgments with respect to, among other things, future economic, geo-political, competitive, market and technological conditions, and future business decisions, all of which are difficult or impossible to predict accurately and many of which are beyond our control. Although we believe that the assumptions underlying the forward-looking statements contained herein are reasonable, any of those assumptions could prove inaccurate, and therefore there is and can be no assurance that the results contemplated in any such forward-looking statement will be realized. The impact of actual experience and business developments may cause us to alter our marketing plans, our capital expenditure budgets, or our engineering, selling, manufacturing or other budgets, which may in turn affect our results of operations or the success of our new product development and introduction. We may not be able to alter our plans or budgets in a timely manner, resulting in reduced profitability or losses.
 
     Due to the factors noted above and elsewhere in this Management’s Discussion and Analysis of Financial Condition and Results of Operations, our future earnings and stock price may be subject to significant volatility, particularly on a quarterly basis. Additionally, we may not learn of revenue or earnings shortfalls until late in a fiscal quarter, since we frequently receive a significant number of orders very late in a quarter. This could result in an immediate and adverse effect on the trading price of our common stock. Past financial performance should not be considered a reliable indicator of future performance, and investors should not use historical trends to anticipate results or trends in future periods.
 
39
 


Item 7A. Quantitative and Qualitative Disclosures About Market Risk.
 
Interest Rate Risk
 
     Our cash and cash equivalent investments are exclusively in short-term money market and sweep instruments with maturities of less than 90 days. These are subject to limited interest rate risk. A 10% change in interest rates would not have a material effect on our financial condition or results of operations. Our short- and long-term investments are invested in Auction Rate Securities and municipal government bonds that bear interest at rates of 1.4% to 6.0%. An immediate 10% change in interest rates would have no material effect on our financial condition or results of operations.
 
Foreign Currency Exchange Rate Risk
 
     We have not historically hedged sales from or expenses incurred by our European operations that have a functional currency in Euros. Therefore, a hypothetical 10% change in the exchange rates between the U.S. dollar and the Euro could increase or decrease our income before taxes by less than $0.4 million for the continued maintenance of our European facility. We hedged between €2.8 million and €5.0 million during the year ended December 31, 2009 and between €2.5 million and €5.1 million during the year ended December 31, 2008 of accounts receivable denominated in Euros. A hypothetical 10% change in the exchange rates between the US dollar and the Euro could increase or decrease income before taxes by between $0.7 million and $1.2 million.
 
Item 8. Financial Statements and Supplementary Data.
 
     This information appears following Item 15 of this report and is incorporated herein by reference.
 
Item 9. Changes In and Disagreements With Accountants on Accounting and Financial Disclosure.
 
     None.
 
Item 9A. Controls and Procedures.
 
Disclosure Controls and Procedures
 
     Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this report (the “Evaluation Date”). Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded as of the Evaluation Date that our disclosure controls and procedures were effective. Disclosure controls and procedures require that the information relating to us required to be disclosed in our Securities and Exchange Commission (“SEC”) reports (i) is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms, and (ii) is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
 
Internal Control over Financial Reporting
 
     Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we are responsible for establishing and maintaining an effective system of internal control over financial reporting (as defined in Rule 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934). Our management has conducted an assessment of our internal control over financial reporting based on the framework established by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control – Integrated Framework. Our management has prepared an annual report on internal control over financial reporting. Management’s report is included in this Annual Report on Form 10-K on page F-3. In addition, Grant Thornton, LLP, our independent registered public accounting firm, has prepared its report on the effectiveness of our internal control over financial reporting and such report is included on pages F-4 to F-5 of the consolidated financial statements.
 
40
 


Changes in Internal Control over Financial Reporting
 
     There have not been any changes in our internal control over financial reporting identified in connection with the assessment that occurred during the fourth quarter of 2009 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting. Our management has prepared an annual report on internal control over financial reporting.
 
Item 9B. Other Information.
 
     None.
 
41
 


PART III
 
Item 10. Directors, Executive Officers and Corporate Governance.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held May 6, 2010.
 
Item 11. Executive Compensation.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held May 6, 2010.
 
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held May 6, 2010.
 
Item 13. Certain Relationships and Related Transactions, and Director Independence.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held May 6, 2010.
 
Item 14. Principal Accountant Fees and Services.
 
     Incorporated herein by reference to our Definitive Proxy Statement with respect to our Annual Meeting of Stockholders scheduled to be held May 6, 2010.
 
42
 


PART IV
 
Item 15. Exhibits and Financial Statement Schedules.
 
(a) Documents
         
  1. Financial Statements --  
 
       Management’s Report on Internal Control Over Financial Reporting F-3
       Reports of Independent Registered Public Accounting Firm F-4 to F-6
       Consolidated Balance Sheets December 31, 2009 and 2008 F-7
       Consolidated Statements of Operations Years Ended December 31, 2009, 2008 and 2007 F-8
       Consolidated Statements of Changes in Stockholders’ Equity and Comprehensive  
       Income Years Ended December 31, 2009, 2008 and 2007 F-9
       Consolidated Statements of Cash Flows Years Ended December 31, 2009, 2008 and 2007 F-10
       Notes to Consolidated Financial Statements F-11 to F-32
 
2. Financial Statement Schedule --  
 
       Schedule II -- Valuation and Qualifying Accounts and Reserves F-33
 
43
 


STRATASYS, INC. AND SUBSIDIARIES
 
CONSOLIDATED FINANCIAL STATEMENTS
AND
REPORTS OF INDEPENDENT REGISTERED
PUBLIC ACCOUNTING FIRM
 
DECEMBER 31, 2009 AND 2008
 
F-1
 


CONTENTS
 
Management’s Report on Internal Controls over Financial Reporting F-3
 
Reports of Independent Registered Public Accounting Firms F-4-F-6
 
Consolidated Financial Statements
 
       Balance Sheets F-7
 
       Statements of Operations F-8
 
       Statements of Changes in Stockholders' Equity and Comprehensive Income F-9
   
       Statements of Cash Flows F-10
   
       Notes to Financial Statements F-11-F-32
   
Schedule II - Valuation and Qualifying Accounts and Reserves F-33

F-2
 


MANAGEMENT’S RESPONSIBILITY FOR FINANCIAL REPORTING
 
     Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting (as such term is defined in Rule 13a-15(f) under the Securities Exchange Act of 1934). The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with accounting principles generally accepted in the United States, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.
 
     Internal control over financial reporting is designed to provide reasonable assurance to the Company’s management and board of directors regarding the preparation of reliable financial statements for external purposes in accordance with accounting principles generally accepted in the United States. Internal control over financial reporting includes self-monitoring mechanisms and actions taken to correct deficiencies as they are identified. Because of the inherent limitations in any internal control, no matter how well designed, misstatements may occur and not be prevented or detected. Accordingly, even effective internal control over financial reporting can provide only reasonable assurance with respect to financial statement preparation. Further, the evaluation of the effectiveness of internal control over financial reporting was made as of a specific date, and continued effectiveness in future periods is subject to the risks that controls may become inadequate because of changes in conditions or that the degree of compliance with the policies and procedures may decline.
 
MANAGEMENT’S REPORT ON INTERNAL CONTROLS OVER FINANCIAL REPORTING
 
     Management conducted an evaluation of the effectiveness of the Company’s system of internal control over financial reporting as of December 31, 2009 based on the framework set forth in “Internal Control — Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on its evaluation, management concluded that, as of December 31, 2009, the Company’s internal control over financial reporting was effective.
 
/s/ S. SCOTT CRUMP
S. Scott Crump
Chief Executive Officer
 
 
/s/ ROBERT F. GALLAGHER
Robert F. Gallagher
Chief Financial Officer
 
 
Date: March 8, 2010

F-3
 


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
Board of Directors and Shareholders
Stratasys, Inc.
 
We have audited the accompanying consolidated balance sheets of Stratasys, Inc. (a Delaware Corporation) and subsidiaries (collectively, the “Company”) as of December 31, 2009 and 2008, and the related consolidated statements of operations, stockholders’ equity and comprehensive income, and cash flows for each of the three years in the period ended December 31, 2009. Our audits of the basic financial statements included the financial statement schedule listed in the index appearing under Item 15. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and financial schedule based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.
 
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Stratasys, Inc. and subsidiaries as of December 31, 2009 and 2008, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2009 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Stratasys, Inc.’s internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) and our report dated March __, 2010 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.
 
/s/ GRANT THORNTON LLP
Minneapolis, Minnesota
 
March 8, 2010

F-4
 


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
Board of Directors and Shareholders
Stratasys, Inc.
 
We have audited Stratasys, Inc. (a Delaware Corporation) and subsidiaries (collectively, the “Company”) internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on Stratasys, Inc.’s internal control over financial reporting based on our audit.
 
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
 
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
In our opinion, Stratasys, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control – Integrated Framework issued by COSO.
 
F-5
 


We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Stratasys, Inc. and subsidiaries as of December 31, 2009 and 2008, and the related consolidated statements of operations, changes in stockholders’ equity and comprehensive income, and cash flows for each of the three years in the period ended December 31, 2009, and our report dated March __, 2010 expressed an unqualified opinion on those financial statements.
 
/s/ GRANT THORNTON LLP
Minneapolis, Minnesota
 
March 8, 2010

F-6
 


STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Consolidated Balance Sheets
December 31,       2009       2008
ASSETS
 
Current assets
       Cash and cash equivalents $ 48,315,926 $ 27,945,799
       Short-term investments - held to maturity 16,073,718 4,835,055
       Accounts receivable, less allowance for doubtful
              accounts of $903,101 at December 31, 2009  
              and $1,017,521 at December 31, 2008 19,249,813 26,539,733
       Inventories 14,608,014 19,889,351
       Net investment in sales-type leases, less allowance    
              for doubtful accounts of $222,011 at December 31,
              2009 and $324,642 at December 31, 2008 3,618,876 3,870,472
       Prepaid expenses and other current assets   2,247,612 2,608,080
       Deferred income taxes 2,277,000   2,168,000
              Total current assets   106,390,959 87,856,490
Property and equipment, net 26,326,012 29,749,921
Other assets  
       Intangible assets, net 7,653,269 8,347,200
       Net investment in sales-type leases 3,477,039 4,545,977
       Deferred income taxes 688,000 -
       Long-term investments - available for sale 1,055,750 1,109,250
       Long-term investments - held to maturity 5,467,318 13,825,981
       Other non-current assets 2,078,165 2,308,214
              Total other assets 20,419,541 30,136,622
Total assets $ 153,136,512 $ 147,743,033
 
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities
       Accounts payable and other current liabilities $ 12,874,798 $ 11,795,238
       Unearned revenues 10,678,427 12,765,396
              Total current liabilities 23,553,225 24,560,634
Non-current liabilities
       Deferred tax liabilities - 620,000
              Total non-current liabilities - 620,000
Total liabilities 23,553,225 25,180,634
Commitments and contingencies
Stockholders' equity
       Common stock, $.01 par value, authorized 30,000,000 shares;
              26,053,318 and 25,909,603 issued as of 2009 and
              2008, respectively 260,533 259,096
       Capital in excess of par value 94,329,398 91,611,078
       Retained earnings 74,015,940 69,899,669
       Accumulated other comprehensive loss (18,159 ) (203,019 )
       Less cost of treasury stock, 5,687,631 shares
              as of 2009 and 2008 (39,004,425 ) (39,004,425 )
              Total stockholders' equity 129,583,287 122,562,399
Total liabilities and stockholders' equity $        153,136,512 $        147,743,033
   
See accompanying notes to consolidated financial statements.

F-7
 


STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Consolidated Statements of Operations
Years Ended December 31,       2009       2008       2007
 
Net sales
       Products $ 73,210,550 $ 98,969,152 $ 89,280,009
       Services 25,145,682 25,525,860 22,962,572
98,356,232 124,495,012 112,242,581
 
Cost of sales      
       Products 40,925,443 47,672,443 40,540,564
       Services 11,047,217 10,410,249   11,993,906
51,972,660 58,082,692   52,534,470
 
Gross profit 46,383,572 66,412,320 59,708,111
 
Operating expenses    
       Research and development   7,737,125     8,973,203 7,465,334
       Selling, general and administrative 32,822,727 36,842,665 33,769,880
40,559,852 45,815,868 41,235,214
 
Operating income 5,823,720 20,596,452 18,472,897
 
Other income (expense)
       Interest income, net 989,922 2,037,257 2,316,001
       Foreign currency transaction losses, net (232,767 ) (834,762 ) (503,309 )
       Other (398,603 ) (1,065,460 ) 76,468
358,552 137,035 1,889,160
 
Income before income taxes 6,182,272 20,733,487 20,362,057
       Income taxes 2,066,001 7,118,000 6,037,999
 
Net income $        4,116,271 $        13,615,487 $        14,324,058
 
Net income per common share
       Basic $ 0.20 $ 0.66 $ 0.69
       Diluted 0.20 0.65 0.66
 
Weighted average commons shares outstanding
       Basic 20,235,747 20,676,436 20,771,656
       Diluted 20,267,999 21,079,265 21,565,618  

See accompanying notes to consolidated financial statements.
 
F-8
 


STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Stratasys, Inc. and Subsidiaries
Consolidated Statements of Changes in Stockholders' Equity and Comprehensive Income
 
Years Ended December 31, 2009, 2008, and 2007
Accumulated
Other
Capital in Comprehensive Total
Common Stock Excess of Retained Income Treasury Stockholders' Comprehensive
    Shares Amount     Par Value     Earnings     (Loss)     Stock     Equity     Income
Balances, January 1, 2007 24,889,760     $ 248,898 $ 75,602,267 $ 41,960,124 $ (116,995 ) $ (19,902,375 ) $ 97,791,919    
Exercise of stock options and warrants 720,894 7,210 8,501,055   8,508,265
Income tax reductions relating to
       exercise of stock options 1,965,436 1,965,436
Stock based compensation 954,783   954,783
Net income   14,324,058 14,324,058 $ 14,324,058
Other comprehensive income,
       foreign currency translation adjustment 289,068 289,068 289,068
Total comprehensive income $    14,613,126
Balances, December 31, 2007 25,610,654 256,108 87,023,541 56,284,182 172,073 (19,902,375 ) 123,833,529
 
Exercise of stock options and warrants 298,949 2,988 3,224,060 3,227,048
Income tax reductions relating to
       exercise of stock options 41,881 41,881
Purchase of 1,087,575 shares of treasury stock (19,102,050 ) (19,102,050 )
Stock based compensation 1,321,596 1,321,596
Net income 13,615,487 13,615,487 $ 13,615,487
Other comprehensive income,
       unrealized loss on securities (128,000 ) (128,000 ) (128,000 )
       foreign currency translation adjustment (247,092 ) (247,092 ) (247,092 )
Total comprehensive income $ 13,240,395
Balances, December 31, 2008 25,909,603 259,096 91,611,078 69,899,669          (203,019 ) (39,004,425 ) 122,562,399
 
Exercise of stock options and warrants 143,715 1,437 1,664,061 1,665,498
Tax benefit shortfall relating to
       exercise of stock options (82,811 ) (82,811 )
Stock based compensation 1,137,070 1,137,070
Net income 4,116,271 4,116,271 $ 4,116,271
Other comprehensive income,
       unrealized loss on securities adjustment 26,500 26,500 26,500
       foreign currency translation adjustment 158,360 158,360 158,360
Total comprehensive income $           4,301,131
Balances, December 31, 2009 26,053,318 $    260,533 $    94,329,398 $    74,015,940 $ (18,159 ) $    (39,004,425 ) $    129,583,287  

F-9
 


STRATASYS, INC. AND SUBSIDIARIES
CONSOLIDATED FINANCIAL STATEMENTS
 
Consolidated Statements of Cash Flows
 
Years ended December 31,       2009       2008       2007
Cash flows from operating activities
       Net income $ 4,116,271 $      13,615,487 $      14,324,058
       Adjustments to reconcile net income to net cash
                     provided by (used in) operating activities:
              Deferred income taxes      (1,431,000 ) (51,000 ) (56,000 )
              Depreciation 5,827,113 4,810,237 3,608,601
              Amortization 2,428,540 2,193,609 1,365,735
              Stock-based compensation 1,137,070 1,321,597 954,783
              Loss (gain) on disposal of property and equipment 314,414 (61,784 ) 7,379
              Loss on write-down of investment 444,000 1,270,750 -
 
              Increase (decrease) in cash attributable to changes in
                     operating assets and liabilities:
                            Accounts receivable, net 7,289,920 (233,037 ) (1,271,388 )
                            Inventories 4,810,441 (6,875,415 ) (2,423,068 )
                            Net investment in sales-type leases 1,320,534 (1,057,814 ) (1,229,566 )
                            Prepaid expenses 360,468 (100,764 ) 861,270
                            Other assets (119,951 ) (964 ) (836,268 )
                            Accounts payable and other current liabilities 1,079,560 (2,121,903 ) 5,588,851
                            Unearned revenues (2,086,969 ) 1,800,925 1,087,752
                            Excess tax benefit from stock options - (18,747 ) (812,766 )
Net cash provided by operating activities 25,490,411 14,491,177 21,169,373
 
Cash flows from investing activities
              Proceeds from sale of investments 7,022,607 23,875,909 14,475,022
              Purchase of investments (9,920,000 ) - (24,459,978 )
              Proceeds from sale of property and equipment 38,445 315,726 63,630
              Acquisition of property and equipment (2,284,676 ) (8,494,145 ) (10,237,990 )
              Acquisition of intangible and other assets (1,687,126 ) (2,407,221 ) (3,682,017 )
Net cash provided by (used in) investing activities (6,830,750 ) 13,290,269 (23,841,333 )
 
Cash flows from financing activities
              Proceeds from exercise of stock options and warrants 1,582,687 3,229,259 8,508,265
              Excess tax benefit from stock options - 18,747 812,766
              Purchase of treasury stock - (19,104,261 ) -
Net cash provided by (used in) financing activities 1,582,687 (15,856,255 ) 9,321,031
 
Effect of exchange rate changes on cash 127,779 (191,163 ) 259,855
 
Net increase in cash and cash equivalents 20,370,127 11,734,028 6,908,926
Cash and cash equivalents, beginning of year 27,945,799 16,211,771 9,302,845
 
Cash and cash equivalents, end of year $ 48,315,926 $ 27,945,799 $ 16,211,771
 
       Supplemental Disclosures of cash flow information:
              Cash paid for taxes $ 626,407 $ 8,133,189 $ 3,011,834
              Transfer of fixed assets to inventory 245,329 242,701 422,950
              Transfer of inventory to fixed assets 716,225 3,118,720 740,388

See accompanying notes to consolidated financial statements.
 
F-10
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 1. Nature of Operations and Summary of Significant Accounting Policies
 
Nature of Operations
 
Stratasys, Inc. and subsidiaries (collectively the "Company") develops, manufactures, distributes and markets a family of rapid prototyping (“RP”), three-dimensional (“3D”) printing and direct digital manufacturing (“DDM”) systems that permit engineers and designers to create physical models and prototypes, made of various materials, utilizing three dimensional Computer Aided Design ("3D CAD") files at a CAD workstation. The Company sells these systems and the related consumable materials and maintenance worldwide. In addition, the Company offers both existing and potential customers the ability to purchase prototypes and parts that it makes for them from CAD files that they provide to the Company.
 
Principles of Consolidation
 
The accompanying consolidated financial statements include the accounts of Stratasys, Inc. and its wholly owned subsidiaries. All intercompany accounts and transactions have been eliminated in consolidation.
 
Use of Estimates
 
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
 
Reclassifications
 
Certain reclassifications have been made to the prior years’ financial statements to conform to the current year presentation. These reclassifications had no effect on previously reported results of operations.
 
Cash and Cash Equivalents
 
The Company considers all highly-liquid debt instruments purchased with maturities of three months or less when acquired to be cash equivalents. At December 31, 2009 and 2008, cash equivalents consisted of money market accounts aggregating approximately $46.1 million and $26.1 million, respectively. As of December 31, 2009 and 2008, and at various times during those years, balances of cash at financial institutions exceeded the federally insured limit. The Company has not experienced any losses in such accounts and believes it is not subject to any significant credit risk on cash and cash equivalents. At December 31, 2009 and 2008, cash balances held in foreign bank accounts were approximately $0.3 million and $0.9 million, respectively. Cash balances held in foreign accounts are subject to local banking laws and may bear higher or lower risk than cash deposited in the United States.
 
Short-term and Long-term Investments
 
Classification of investments as current or non-current is dependent upon management’s intended holding period, the investment’s maturity date and liquidity considerations based on market conditions. These investments are then evaluated and classified as available-for-sale or held-to-maturity in accordance with the provisions of the Accounting Standards Codification (“ASC”) 320, Investments – Debt and Equity Securities. This evaluation takes into consideration the Company’s past history of holding investments until maturity, projected cash flow estimates, future capital requirements, the existence of credit deterioration of the issuer and the Company’s overall investment strategy as established by management and approved by its Board of Directors.
 
If management has the positive intent and ability to hold its debt securities until maturity, they are classified as “held-to-maturity” and accounted for using the amortized-cost method. All other securities are classified as “available-for-sale” and accounted for at fair value with the realized gain or loss, net of tax, reported in current period income and unrealized gain or loss, net of tax, reported in other comprehensive income. The Company does not hold any investments for trading purposes and had no unrecognized gains or losses related to held-to-maturity investments at December 31, 2009 or 2008, as the fair value of those investments approximated cost.
 
F-11
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Fair Value of Financial Instruments
 
The fair value of the Company's assets and liabilities, which qualify as financial instruments under ASC 820, Fair Value Measurements and Disclosures, approximate the carrying amounts presented in the consolidated balance sheets.
 
Accounts Receivable
 
The Company carries its accounts receivable at cost less an allowance for returns and doubtful accounts. On a periodic basis, the Company evaluates its accounts receivable and establishes an allowance for doubtful accounts based on a history of past write-offs and collections and current credit conditions. The Company evaluates a number of factors to assess collectibility, including an evaluation of the creditworthiness of the customer, past payment history, and current economic conditions. It is reasonably possible that the Company’s estimate of the allowance for doubtful accounts will change. Accounts are written-off against the reserve when management deems the accounts are no longer collectible. The Company also records a provision for estimated product returns and allowances in the period in which the related revenue is recorded. This provision against current gross revenue is based principally on historical rates of sales returns, but also factors in changes in the customer base, geographic economic conditions, and changes in the financial conditions of the Company’s customers.
 
Inventories
 
Inventories are stated on the first-in, first-out method, at the lower of cost or market. Inventory costs consist of material, direct labor and overhead. The Company periodically assesses inventory for obsolescence and excess by reducing the carrying amount by an amount equal to the difference between its cost and the estimated market value based on assumptions about future demand and historical sales patterns.
 
Impairment of Long-Lived Assets
 
The Company complies with ASC 360, Property, Plant, and Equipment, and annually assesses the recoverability of the carrying amounts of long-lived assets, including intangible assets, at year-end. An impairment loss would be recognized if expected undiscounted future cash flows are less than the carrying amount of the asset. This loss would be determined by calculating the difference by which the carrying amount of the asset exceeds its fair value. Based on the Company’s assessment as of December 31, 2009, no long-lived assets were determined to be impaired.
 
Property and Equipment
 
Property and equipment is stated at cost less accumulated depreciation and amortization. Depreciation and amortization are computed using the straight-line method over the estimated useful lives of the assets ranging from two to 30 years. The Company recorded depreciation expense not included in cost of sales of approximately $2.0 million, $1.7 million, and $1.1 million for the years ended December 31, 2009, 2008, and 2007, respectively. Maintenance and repairs are charged to operations, while betterments and improvements are capitalized.
 
Intangible Assets
 
Intangible assets are capitalized and amortized over their estimated useful or economic lives using the straight-line method in conformity with ASC 350, Intangibles – Goodwill and Other, as follows:
 
          RP technology 11 years
  Capitalized software development costs 3 years
Patents 10 years
Trademarks 5 years
F-12
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The costs of software development, including significant product enhancements, incurred subsequent to establishing technological feasibility have been capitalized in accordance with ASC 985-20, Costs of Software to be Sold, Leased or Marketed. Costs incurred prior to establishment of technological feasibility are charged to research and development expense.
 
Unearned Revenues
 
The Company services and supports customers by providing warranties and selling maintenance agreements for its products. Unearned revenues are comprised of purchased and implied maintenance agreements covering future periods. Implied maintenance is the portion of revenue received at the time of a system sale that represents maintenance coverage commitments that were included in the sale that extend beyond the stated warranty period. Maintenance revenue is recognized in equal installments over the period of the agreement. The purchased maintenance is deferred in whole and amortized over the period of coverage ranging from one to five years.
 
Revenue Recognition
 
The Company derives revenue from sales of 3D printing, rapid prototyping (“RP”) and direct digital manufacturing (“DDM”) systems, consumables, and services. The Company recognizes revenue when (1) persuasive evidence of a final agreement exists, (2) delivery has occurred or services have been rendered, (3) the selling price is fixed or determinable, and (4) collectibility is reasonably assured. The Company’s standard terms are FOB shipping point, and as such most of the revenue from the sale of RP machines and consumables is recognized when shipped. Exceptions to this policy occur only if a customer’s purchase order indicates an alternative term or provides that the equipment sold would be subject to certain contingencies, such as formal acceptance. In these instances, revenues would be recognized only upon satisfying the conditions established by the customer as contained in its purchase order to the Company. Revenue from sales-type leases for the Company’s high-performance systems is recognized at the time of lessee acceptance, which follows installation. Revenue from sales-type leases for the Company’s Dimension systems is recognized at the time of shipment, since either the customer or the reseller performs the installation. The Company recognizes revenue from sales-type leases at the net present value of future lease payments. Revenue from operating leases is recognized ratably over the lease period.
 
Service revenue is derived from sales of maintenance contracts, installation services, and training. Service revenue from maintenance contracts is recognized ratably over the term of the contract, typically one to two years. The Company offers warranty periods ranging from 90 days to one year. On certain sales that require a one-year warranty, the extended warranty is treated for revenue recognition purposes as a maintenance agreement. The fair value of this maintenance agreement is deferred and recognized ratably over the period of the extended warranty as an implied maintenance contract. Installation service revenues are recognized upon completion of the installation. Training revenues are recognized upon completion of the training.
 
In accordance with ASC 605, Revenue Recognition, when two or more product offerings are contained in a single arrangement, revenue is allocated between the elements based on their relative fair value, provided that each element meets the criteria for treatment as a separate unit of accounting. An item is considered a separate unit of accounting if it has value to the customer on a stand-alone basis and there is objective and reliable evidence of the fair value of the undelivered items. Fair value is generally determined based upon the price charged when the element is sold separately. In the absence of fair value for a delivered element, revenue is allocated first to the fair value of the undelivered elements and then the residual revenue is allocated to the delivered elements. In the absence of fair value for an undelivered element, the arrangement is accounted for as a single unit of accounting, resulting in a delay of revenue recognition for the delivered elements until all undelivered elements have been fulfilled.
 
Revenues from training and installation are unbundled and are recognized after the services have been performed. Most of the Company’s products are sold through distribution channels, with training and installation services offered by the resellers. For the Dimension product neither installation nor training is offered by the Company. The equipment manufactured and sold by the Company is subject to factory testing that replicates the conditions under which the customers intend to use the equipment. All of the systems are sold subject to published specifications, and all systems sales involve standard models.
 
F-13
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company assesses collectibility as part of the revenue recognition process. This assessment includes a number of factors such as an evaluation of the creditworthiness of the customer, past payment history, and current economic conditions. If it is determined that collectibility cannot be reasonably assured, the Company will decline shipment, request a down payment, or defer recognition of revenue until ultimate collectibility is reasonably assured.
 
The Company also records a provision for estimated product returns and allowances in the period in which the related revenue is recorded. This provision against current gross revenue is based principally on historical rates of sales returns, but also factors in changes in the customer base, geographic economic conditions, and changes in the financial conditions of the Company’s customers. There was no provision for product returns and allowances at December 31, 2009, and the provision for product returns and allowances was approximately $122,000 as of December 31, 2008.
 
Foreign Currency Hedge
 
The Company invoices sales to certain European distributors in Euros and reported results are therefore subject to fluctuations in the exchange rates of that currency in relation to the United States dollar. The Company’s strategy is to hedge most of its Euro-denominated accounts receivable positions by entering into 30-day foreign currency forward contracts on a month-to-month basis to reduce the risk that its earnings will be adversely affected by changes in currency exchange rates. The Company does not use derivative financial instruments for speculative or trading purposes. The Company enters into 30-day foreign currency forward contracts on the last day of each month and therefore the notional value of the contract equals the fair value at the end of each reporting period. As such, there is no related asset or liability or unrealized gains or losses recorded on the Balance Sheet as of the end of the period. All realized gains and losses related to hedging activities are recorded in current period earnings under the Statement of Operations caption “Foreign currency transaction losses, net”.
 
Advertising
 
Advertising costs are charged to operations as incurred and were approximately $3.4 million, $4.0 million, and $3.5 million, for 2009, 2008 and 2007, respectively.
 
Research and Development Costs
 
The Company complies with ASC 730, Research and Development. Expenditures for research, development and engineering of products and manufacturing processes are expensed as incurred.
 
Sales Tax
 
Taxes collected from customers and remitted to governmental authorities are recorded on a net basis (excluded from revenues) in the Company’s Consolidated Statement of Operations.
 
Income Taxes
 
The Company complies with ASC 740, Income Taxes, which requires an asset and liability approach to financial reporting of income taxes. Deferred income tax assets and liabilities are computed for differences between the financial statement and tax basis of assets and liabilities that will result in taxable or deductible amounts in the future, based on enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established, when necessary, to reduce the deferred income tax assets to the amount expected to be realized.
 
In accordance with ASC 740, Income Taxes, the Company takes a two-step approach to recognizing and measuring uncertain tax positions (tax contingencies). The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount which is more than 50% likely of being realized upon ultimate settlement. The Company reevaluates these tax positions quarterly and makes adjustments as required.
 
F-14
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Earnings Per Share
 
The Company complies with ASC 260, Earnings Per Share, which requires dual presentation of basic and diluted income per common share for all periods presented. Basic net income per share excludes dilution and is computed by dividing net income by the weighted average number of shares outstanding for the periods that have net income. Diluted net income per share reflects the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock or resulted in the issuance of common stock that then share in the income of the Company. The difference between the number of common shares used to compute basic net income per share and diluted net income per share relates to additional common shares that would be issued upon the assumed exercise of stock options and warrants, net of the common shares that would hypothetically be repurchased using the proceeds received from the original exercise. The additional common shares amounted to 32,252 in 2009, 402,829 in 2008 and 793,962 in 2007. A total of 812,000, 265,000 and 258,000 shares were excluded from the dilution calculation for the years ended December 31, 2009, 2008 and 2007, respectively, since their inclusion would have an anti-dilutive effect.
 
Stock-Based Compensation
 
The Company calculates the fair value of stock-based option awards on the date of grant using the Black-Scholes option pricing model. The computation of expected volatility is based on historical volatility from traded options on our stock. The expected option term is calculated in accordance with ASC 718, Compensation – Stock Compensation. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury yield curve in effect at the time of grant. Each of the three factors requires the Company to use judgment and make estimates in determining the percentages and time periods used for the calculation. If the Company were to use different percentages or time periods, the fair value of stock-based option awards could be materially different.
 
Accrued Product Warranties
 
The Company’s products are covered by a warranty with periods ranging from ninety days to one year from the date of sale to the end customer. A liability is recorded for future warranty costs in the same period in which related revenue is recognized. The liability is based on anticipated parts and labor costs utilizing historical experience. The Company periodically assesses the adequacy of the warranty reserves based on changes in these factors and records any necessary adjustments if actual experience indicates that adjustments are necessary. Future claims experience could be materially different from prior results because of the introduction of new, more complex products, a change in our warranty policy in response to industry trends, competition or other external forces, or manufacturing changes that could impact product quality. In the event that the Company determines that our current or future product repair and replacement costs exceed estimates, an adjustment to these reserves would be charged to earnings in the period such a determination is made. As of December 31, 2009 and 2008, the Company had $0.7 million and $0.3 million, respectively, accrued for future estimated warranty claims.
 
Comprehensive Income
 
The Company complies with ASC 220, Comprehensive Income, which establishes rules for the reporting and display of comprehensive income (loss) and its components. The Company reports the financial impact of translating its foreign subsidiaries’ financial statements from local currency to reporting currency as a component of comprehensive income (loss).
 
F-15
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Recently Issued Accounting Pronouncements
 
In October 2009, the Financial Accounting Standards Board (“FASB”) issued ASU No. 2009-13, Multiple-Deliverable Revenue Arrangements—a consensus of the FASB Emerging Issues Task Force, that provides amendments to the criteria for separating consideration in multiple-deliverable arrangements. As a result of these amendments, multiple-deliverable revenue arrangements will be separated in more circumstances than under existing U.S. GAAP. The ASU does this by establishing a selling price hierarchy for determining the selling price of a deliverable. The selling price used for each deliverable will be based on vendor-specific objective evidence (“VSOE”) if available, third-party evidence if VSOE is not available, or estimated selling price if neither VSOE nor third-party evidence is available. A vendor will be required to determine its best estimate of selling price in a manner that is consistent with that used to determine the price to sell the deliverable on a standalone basis. This ASU also eliminates the residual method of allocation and will require that arrangement consideration be allocated at the inception of the arrangement to all deliverables using the relative selling price method, which allocates any discount in the overall arrangement proportionally to each deliverable based on its relative selling price. Expanded disclosures of qualitative and quantitative information regarding application of the multiple-deliverable revenue arrangement guidance are also required under the ASU. The ASU does not apply to arrangements for which industry specific allocation and measurement guidance exists, such as long-term construction contracts and software transactions. ASU No. 2009-13 is effective for the Company beginning January 1, 2011. The Company is currently evaluating the impact of this standard on the consolidated results of operations and financial condition.
 
In June 2009, the FASB issued a standard that established the FASB Accounting Standards Codification™ (“ASC”) and amended the hierarchy of accounting principles generally accepted in the United States of America (U.S. GAAP) such that the ASC became the single source of authoritative nongovernmental U.S. GAAP. The ASC did not change current U.S. GAAP, but was intended to simplify user access to all authoritative U.S. GAAP by providing all the authoritative literature related to a particular topic in one place. All previously existing accounting standard documents were superseded and all other accounting literature not included in the ASC is considered non-authoritative. New accounting standards issued subsequent to June 30, 2009 are communicated by the FASB through Accounting Standards Updates (“ASUs”). This standard did not have an impact on the Company’s consolidated results of operations or financial condition. However, throughout the notes to the consolidated financial statements references that were previously made to various former authoritative U.S. GAAP pronouncements have been changed to coincide with the appropriate section of the ASC.
 
In May 2009, the FASB issued a new accounting standard regarding subsequent events. This standard incorporates into authoritative accounting literature certain guidance that already existed within generally accepted auditing standards, with the requirements concerning recognition and disclosure of subsequent events remaining essentially unchanged. This guidance addresses events which occur after the balance sheet date but before the issuance of financial statements. Under the new standard, as under previous practice, an entity must record the effects of subsequent events that provide evidence about conditions that existed at the balance sheet date and must disclose but not record the effects of subsequent events which provide evidence about conditions that did not exist at the balance sheet date. The guidance was effective for fiscal years and interim periods ended after June 15, 2009. The Company has evaluated any subsequent events through the date of this filing.
 
In April 2009, the FASB issued an accounting standard which provides guidance on (1) estimating the fair value of an asset or liability when the volume and level of activity for the asset or liability have significantly declined; and (2) identifying transactions that are not orderly. The standard also amended certain disclosure provisions for fair value measurements and disclosures in ASC 820, Fair Value Measurements and Disclosures, to require, among other things, disclosures in interim periods of the inputs and valuation techniques used to measure fair value as well as disclosure of the hierarchy of the source of underlying fair value information on a disaggregated basis by specific major category of investment. This standard was effective for the Company prospectively beginning April 1, 2009. The adoption of this standard did not have a material impact on the Company’s consolidated results of operations or financial condition.
 
F-16
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
In April 2009, the FASB issued an accounting standard which modifies the requirements for recognizing other-than-temporarily impaired debt securities and changes the existing impairment model for such securities. The standard also requires additional disclosures for both annual and interim periods with respect to both debt and equity securities. Under the standard, impairment of debt securities will be considered other-than-temporary if an entity (1) intends to sell the security, (2) more likely than not will be required to sell the security before recovering its cost, or (3) does not expect to recover the security’s entire amortized cost basis (even if the entity does not intend to sell). The standard further indicates that, depending on which of the above factor(s) causes the impairment to be considered other-than-temporary, (1) the entire shortfall of the security’s fair value versus its amortized cost basis or (2) only the credit loss portion would be recognized in earnings while the remaining shortfall (if any) would be recorded in other comprehensive income. The standard requires entities to initially apply its provisions to previously other-than-temporarily impaired debt securities existing as of the date of initial adoption by making a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. The cumulative-effect adjustment potentially reclassifies the noncredit portion of a previously other-than-temporarily impaired debt security held as of the date of initial adoption from retained earnings to accumulated other comprehensive income. This standard was effective for the Company beginning April 1, 2009. The adoption of this standard did not have a material impact on the Company’s consolidated results of operations or financial condition.
 
In April 2009, the FASB issued an accounting standard regarding interim disclosures about fair value of financial instruments. The standard essentially expands the disclosure about fair value of financial instruments that was previously required only annually to also be required for interim period reporting. In addition, the standard requires certain additional disclosures regarding the methods and significant assumptions used to estimate the fair value of financial instruments. This standard was effective for the Company beginning April 1, 2009 on a prospective basis. The adoption of this standard did not have a material impact on the Company’s consolidated results of operations or financial condition.
 
In April 2008, the FASB issued an accounting standard which amended the list of factors an entity should consider in developing renewal or extension assumptions used in determining the useful life of recognized intangible assets under ASC 350, Intangibles - Goodwill and Other. This new standard applies to (1) intangible assets that are acquired individually or with a group of other assets; and (2) intangible assets acquired in both business combinations and asset acquisitions. Under this standard, entities estimating the useful life of a recognized intangible asset must consider their historical experience in renewing or extending similar arrangements or, in the absence of historical experience, must consider assumptions that market participants would use about renewals or extensions. The guidance was effective for the Company beginning January 1, 2009 and did not have a material impact on the consolidated results of operations or financial condition.
 
In March 2008, the FASB issued an accounting standard related to disclosures about derivative instruments and hedging activities in ASC 815, Derivatives and Hedging, which requires additional disclosures about an entity’s strategies and objectives for using derivative instruments, the location and amounts of derivative instruments in an entity’s financial statements, how derivative instruments and related hedged items are accounted for under ASC 815 and how derivative instruments and related hedged items affect its financial position, financial performance, and cash flows. Certain disclosures are also required with respect to derivative features that are credit risk related. The standard was effective for the Company beginning January 1, 2009 on a prospective basis. The adoption of this standard did not have a material impact on the Company’s consolidated results of operations or financial condition.
 
In December 2007, the FASB ratified a standard related to accounting for collaborative arrangements which discusses how parties to a collaborative arrangement (that does not establish a legal entity within such arrangement) should account for various activities. The standard indicates that costs incurred and revenues generated from transactions with third parties (i.e. parties outside of the collaborative arrangement) should be reported by the collaborators on the respective line items in their income statements pursuant to ASC 605-45, Principal Agent Considerations. Additionally, the guidance provides that income statement characterization of payments between the participants in a collaborative arrangement should be based upon existing authoritative standards, analogy to such standards if not within their scope, or a reasonable, rational, and consistently applied accounting policy election. The guidance was effective for the Company beginning January 1, 2009 and was required to be applied retrospectively to all periods presented for collaborative arrangements that existed as of the date of adoption. This adoption did not have a material impact on the consolidated results of operations or financial condition and the required disclosures are provided in Note 14 – Accounting for Collaborative Arrangements.
 
F-17
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
In September 2006, the FASB issued an accounting standard codified in ASC 820, Fair Value Measurements and Disclosures. This standard established a single definition of fair value and a framework for measuring fair value, set out a fair value hierarchy to be used to classify the source of information used in fair value measurements and required disclosures of assets and liabilities measured at fair value based on their level in the hierarchy. This standard applies under other accounting standards that require or permit fair value measurements. The Company adopted the standard as amended by subsequent FASB standards beginning January 1, 2008 on a prospective basis. One of the amendments deferred the effective date for one year relative to nonfinancial assets and liabilities that are measured at fair value, but are recognized or disclosed at fair value on a nonrecurring basis. This deferral applied to such items as nonfinancial assets and liabilities initially measured at fair value in a business combination (but not measured at fair value in subsequent periods) or nonfinancial long-lived asset groups measured at fair value for an impairment assessment. These remaining aspects of the fair value measurement standard were adopted by the Company prospectively beginning January 1, 2009. This adoption did not have a material impact on the consolidated results of operations or financial condition and the disclosures required by it are provided in Note 11 – Fair Value Measurements.
 
Note 2. Investments
 
Classification of investments as current or non-current is dependent upon management’s intended holding period, the investment’s maturity date and liquidity considerations based on market conditions. These investments are then evaluated and classified as available-for-sale or held-to-maturity in accordance with the provisions of ASC 320, Investments - Debt and Equity Securities. This evaluation takes into consideration the Company’s past history of holding investments until maturity, projected cash flow estimates, future capital requirements, the existence of credit deterioration of the issuer and the Company’s overall investment strategy as established by management and approved by the Company’s Board of Directors.
 
If management has the positive intent and ability to hold its debt securities until maturity, they are classified as “held-to-maturity” and accounted for using the amortized-cost method. All other securities are classified as “available-for-sale” and accounted for at fair value with the unrealized gain or loss, net of tax, reported in other comprehensive income. The Company does not hold any investments for trading purposes and had no unrecognized gains or losses related to held-to-maturity investments at December 31, 2009 or December 31, 2008, as the fair value of those investments approximated cost.
 
The Company invests in certificates of deposit, tax-free auction rate securities, government bonds, and municipal notes, all of which are insured. The following is a summary of amounts recorded on the Consolidated Balance Sheet for marketable securities (current and non-current) at December 31, 2009 and 2008.
 
2009       2008
Government bonds $ 8,113,361 $ 4,834,698
Other securities 357 357
Certificates of deposit 7,960,000 -
Short-term investments - held to maturity 16,073,718 4,835,055
 
Auction rate securities 1,055,750 1,109,250
Long-term investments - available for sale securities 1,055,750 1,109,250
 
Auction rate securities 2,400,000 2,400,000
Government bonds 1,107,318 11,425,981
Certificates of deposit 1,960,000 -
Long-term investments - held to maturity 5,467,318 13,825,981
 
Total investments $      22,596,786 $      19,770,286
 

F-18
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Short-term and long-term investments consist of certificates of deposit, tax-free government bonds, and Auction Rate Securities (“ARS”). At December 31, 2009, the Company’s investments included:
The balance sheet caption titled “Long-term investments – available for sale securities” consisted of approximately $1.1 million of a tax-free ARS. This balance represents the current estimated fair value of an ARS issued by Jefferson County, Alabama with a face value of $2.6 million. The investment is part of a multi-billion series of bonds issued by Jefferson County to build its sewer and water treatment system (“system”). The County entered into interest rate swaps to protect itself from rising interest rates, but the swaps proved ineffective and the revenue from the system will not adequately support the higher interest rates. The bond is insured by Financial Guaranty Insurance Company (“FGIC”) and matures in 2042. However, with the collapse of the ARS market, the weakened financial condition of FGIC, and the County’s financial condition, the rating of this ARS has gone from Aaa to Caa3. The Company has received $25,000 in principal payments on this ARS and no additional principal payments have become due. The Company has received all scheduled interest payments on this ARS through December 31, 2009. Due to the current financial condition of the County and the absence of an active market for this security, the Company only records interest income as cash payments are received.
 
With the assistance of outside consultants, the Company has reviewed this ARS, including expected cash flows, assessed the credit risk, analyzed and extrapolated yield information on comparable composites, and reviewed independent research from various public sources concerning the ARS market. From that assessment, the Company has concluded that during 2008 it had incurred both a temporary and other-than-temporary impairment and recognized impairments of $195,000 and $1,270,750, respectively. Based upon a reevaluation that occurred in late 2009, a portion of the temporary impairment is now considered other-than-temporary and an additional portion of the net carrying amount has also been considered as impaired on an other-than-temporary basis. The following table summarizes the activity of this investment from December 31, 2007 to December 31, 2009.
 
Face value of investment as of December 31, 2007 $ 2,600,000
Principal payment (25,000 )
Temporary impairment - recognized in other comprehensive income (195,000 )
Other-than-temporary impairment - recognized in other income      (1,270,750 )
Net carrying value at December 31, 2008 1,109,250
       
Temporary impairment transferred to other-than-temporary impairment 40,500
Other-than-temporary impairment - recognized in other income (94,000 )
Net carrying value at December 31, 2009 $ 1,055,750

Note 3. Inventories
 
Inventories consisted of the following at December 31:
 
2009       2008
Finished goods $ 6,288,314 $ 11,968,337
Raw materials 8,319,700 7,921,014
$      14,608,014 $      19,889,351
 

F-19
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 4. Net Investment in Sales-type Leases
 
The Company leases certain of its systems under agreements accounted for as sales-type leases. Included in revenues for the years ended December 31, 2009, 2008 and 2007 are approximately $1.7 million, $3.1 million and $2.3 million, respectively, of revenues related to sales-type leases. These non-cancelable leases expire over the next one to five years.
 
The following lists the components of the net investment in sales-type leases as of December 31, 2009 and 2008:
 
     2009      2008
Future minimum lease payments receivable $      7,713,133 $      8,741,091
Less allowance for doubtful accounts (222,011 ) (324,642 )
Net future minimum lease payment receivable 7,491,122 8,416,449
Less unearned interest income (395,207 ) (625,442 )
Net investment in sales-type leases $ 7,095,915 $ 7,791,007
 

Future minimum lease payments due from customers under sales-type leases as of December 31, 2009 were as follows:
 
Year ending December 31,
2010 $      4,061,405
2011 1,938,656
2012 881,936
2013 618,297
     2014 212,839
$ 7,713,133
 

The interest income for sales-type leases amounted to approximately $405,000, $444,000, and $329,000 for the years ended December 31, 2009, 2008 and 2007, respectively.
 
Note 5. Property and Equipment
 
Property and equipment consisted of the following at December 31:
 
     2009      2008
Machinery and equipment $ 23,933,169 $ 22,390,912
Building and improvements 11,780,928 10,974,508
Land and improvements 3,120,619 3,120,618
Computer equipment and software 10,305,828 9,650,394
Office equipment 2,473,521 2,472,412
Furniture and fixtures 2,213,695 2,160,242
Capital work-in-progress 1,851,158 2,847,798
55,678,918 53,616,884
 
Accumulated depreciation and amortization 29,352,906 23,866,963
$      26,326,012 $      29,749,921
 

F-20
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 6. Intangible Assets
 
Intangible assets consisted of the following at December 31:
 
2009 2008
Gross Gross
Carrying Accumulated Carrying Accumulated
     Amount      Amortization      Amount      Amortization
RP technology $ 5,548,417 $ 3,709,907 $ 5,523,255 $ 3,400,011
Capitalized software development costs      12,263,654 8,578,822 10,932,766 6,760,199
Patents 3,304,396      2,066,802 3,012,685 1,838,149
Trademarks 287,682 263,049 271,254 232,010
21,404,149 $ 14,618,580      19,739,960 $      12,230,369
Accumulated amortization 14,618,580 12,230,369
Net book value of amortizable intangible assets 6,785,569 7,509,591
Goodwill 867,700 837,609
Net book value intangible assets $ 7,653,269 $ 8,347,200
 

For the years ended December 31, 2009, 2008 and 2007, amortization of intangible assets charged to operations was approximately $2.4 million, $2.1 million and $1.3 million, respectively. The weighted average remaining amortization period for intangible assets as of December 31, 2009 and 2008 was approximately 2.8 and 3.6 years, respectively. The change in goodwill between 2009 and 2008 is due to translation as this amount is denominated in a foreign currency.
 
Estimated amortization expense, for all intangible assets, for the five years subsequent to December 31, 2009 is as follows:
 
Year ending December 31,
2010 $      2,295,000
2011   1,751,000
2012 939,000
2013 633,000
     2014 423,000

Note 7. Line of Credit
 
The Company had an available line of credit from a financial institution of $1.0 million as of December 31, 2009. The credit line bears interest at defined rates based upon two different indexes and expires in July, 2010. No amounts were outstanding at December 31, 2009 and 2008. The company expects to renew this line of credit upon expiration.
 
F-21
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 8. Accounts Payable and Other Current Liabilities
 
Accounts payable and other current liabilities consisted of the following at December 31:
 
     2009      2008
Trade $ 4,833,992 $ 6,002,138
Compensation, commissions and related benefits 2,993,844 3,962,650
Reserve for warranty expenses 677,757 321,874
Taxes 2,686,979 20,067
Other 1,682,226 1,488,509
$      12,874,798 $      11,795,238
 

A summary of warranty activity for the years ended December 31, 2009 and 2008 is as follows:
 
     2009      2008
Beginning balance $ 321,874 $ 270,858
Accruals for warranties issued during the period      1,280,163 454,007
Warranty costs incurred during the period (924,280 )      (402,991 )
Ending balance $ 677,757 $ 321,874
 

Note 9. Unearned Revenues
 
Unearned revenues consisted of the following at December 31:
 
     2009      2008
Maintenance contracts $ 9,223,806 $ 9,058,501
Implied maintenance contracts 566,377 2,990,228
Other 888,244 716,667
$      10,678,427 $      12,765,396
 

F-22
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 10. Income Taxes
 
The components of the Company's deferred tax assets (liabilities) at December 31, 2009 and 2008 were as follows:
 
     2009      2008
Current deferred tax assets:
       Inventory reserves $ 700,000 $ 713,000
       Deferred maintenance revenue 551,000 729,000
       Allowance for doubtful accounts 330,000 307,000
       State research and development  
              credit carryforward 158,000 224,000
       Reserve for warranty expenses 252,000 102,000
       Vacation accrual 239,000 167,000
       Reserve for sales returns, net - 46,000
              Current deferred tax assets 2,230,000 2,288,000
Current deferred tax liabilities:
       Unrealized gain on foreign currency 47,000 (120,000 )
Net current deferred tax assets $ 2,277,000 $ 2,168,000
 
Long-term deferred tax assets:
       Stock compensation expense 458,000 530,000
       Investment reserves 694,000 551,000
       Amortization 820,000 228,000
              Long-term deferred tax assets 1,972,000 1,309,000
Long-term deferred tax liabilities:
       Depreciation      (1,047,000 )      (1,673,000 )
       Software capitalization (237,000 ) (256,000 )
Net long-term deferred tax assets (liabilities) $ 688,000 $ (620,000 )
 

Income (loss) before income taxes for the years ended December 31, 2009, 2008 and 2007 was as follows:
 
     2009      2008      2007
United States $ 5,994,420 $ 20,270,134 $ 19,915,766
Foreign 187,852 463,353 446,291
$      6,182,272 $      20,733,487 $      20,362,057
 

F-23
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The components of income tax expense for the years ended December 31, 2009, 2008 and 2007 were as follows:
 
     2009      2008      2007
Current
       Federal $ 3,143,000 $ 5,976,000 $ 6,547,184
       State 416,000 878,000 (718,749 )
       Foreign 130,000 121,000 153,564
3,689,000 6,975,000 5,981,999
 
Deferred
       Federal (1,604,000 ) 133,000 (157,000 )
       State (19,000 ) 10,000 213,000
     (1,623,000 ) 143,000 56,000
       Total Income taxes $ 2,066,000 $      7,118,000 $      6,037,999
 

During the year ended December 31, 2009, approximately $83,000 was subtracted from additional paid-in capital in accordance with ASC 740, Income Taxes, reflecting the permanent book to tax difference in accounting for tax benefits related to employee stock option transactions. During the years ended December 31, 2008, and 2007, approximately $42,000, and $1,965,000, respectively, was added to additional paid-in capital to reflect the permanent book to tax difference in accounting for tax benefits related to employee stock option transactions.
 
A reconciliation of the statutory federal income tax rate and the effective tax rate for the years ended December 31, 2009, 2008 and 2007 is set forth below:
 
     2009      2008      2007
Federal statutory rate 35.0 %   35.0 %   35.0 %
State income taxes, net of
       federal benefit 2.6 2.5 1.9
Prior year amendments for state
       research and development credits - - (3.7 )
Tax exempt interest income (2.6 ) (2.0 ) (3.2 )
Stock compensation expense 2.0 1.3 0.7
Manufacturing deduction (2.0 ) (1.4 ) (1.8 )
Federal research and
       development tax credit (4.9 ) (2.1 ) (1.8 )
Tax contingencies 2.4 0.9 2.2
Other 0.9 0.1 0.3
Effective income tax rate    33.4 %      34.3 %      29.6 %
 

At December 31, 2009 the Company had Minnesota tax credit carry-forwards of approximately $158,000. The Company expects to utilize its state research and development tax credit carry-forwards that would otherwise expire from 2018 through 2023.
 
Significant judgment is required in evaluating the Company’s tax positions and determining its provision for income taxes. During the ordinary course of business, there are many transactions and calculations for which the ultimate tax determination is uncertain. The Company establishes reserves for tax-related uncertainties based on estimates of whether, and the extent to which, additional taxes will be due. These reserves are established when the Company believes that certain positions might be challenged despite its belief that its tax return positions are fully supportable. The Company adjusts these reserves in light of changing facts and circumstances, such as the outcome of a tax audit or changes in the tax law. The provision for income taxes includes the impact of reserve provisions and changes to reserves that are considered appropriate. Accruals for tax contingencies are provided for in accordance with the requirements of ASC 740. 
 
F-24
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company is subject to income taxes in the U.S., various states and certain foreign jurisdictions. It may be subject to examination by the Internal Revenue Service (“IRS”) for calendar years 2006 through 2009. Its Federal income tax returns are closed for all tax years up to and including 2005. The expiration of the statute of limitations related to the various state income tax returns that the Company and subsidiaries file varies by state and foreign jurisdiction.
 
At December 31, 2009 and 2008, the Company had unrecognized tax benefits of $1.2 million and $1.2 million, respectively. If recognized, these benefits would favorably impact the effective tax rate. A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:
 
     2009      2008
Balance at beginning of year $ 1,223,000 $ 1,021,593
Additions for tax positions related to the current year 95,000 244,208
Reduction of reserve for reassessment position (86,000 ) (42,801 )
Balance at end of year $      1,232,000 $      1,223,000
 

The increase in tax liabilities is primarily due to potential U.S. federal and state adjustments taken in the Company’s 2009 income tax provision. The Company’s policy is to include interest and penalties related to its tax contingencies in income tax expense. The Company currently estimates that unrecognized tax benefits will not change materially in the next twelve months.
 
Note 11. Fair Value Measurements
 
As discussed in Note 1 - Recently Issued Accounting Pronouncements, the Company adopted the provisions of ASC 820, Fair Value Measurements, on January 1, 2008 for financial assets and liabilities and for non-financial assets and non-financial liabilities measured on a non-recurring basis on January 1, 2009. Fair value is defined as the exit price, or the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants as of the measurement date. A hierarchy has been established for inputs used in measuring fair value that maximizes the use of observable inputs and minimizes the use of unobservable inputs by requiring that the most observable inputs be used when available.
 
Observable inputs are inputs market participants would use in valuing the asset or liability developed based on market data obtained from sources independent of the Company. Unobservable inputs are inputs that reflect the Company’s assumptions about the factors market participants would use in valuing the asset or liability developed based upon the best information available in the circumstances. The hierarchy is broken down into three levels. Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities. Level 2 inputs include quoted prices for similar assets or liabilities in active markets, quoted prices for identical or similar assets or liabilities in markets that are not active, and inputs (other than quoted prices) that are observable for the asset or liability, either directly or indirectly. Level 3 inputs are unobservable inputs for the asset or liability. Categorization within the valuation hierarchy is based upon the lowest level of input that is significant to the fair value measurement.
 
Assets and Liabilities that are Measured at Fair Value on a Recurring Basis:
 
For financial assets held by the Company, fair value principally applies to available-for-sale marketable securities. These items were previously, and will continue to be, marked-to-market at each reporting period. The information in the following paragraphs and tables primarily addresses matters relative to these financial assets. The Company does not have any financial liabilities that are subject to fair value measurements. Separately, there were no material fair value measurements with respect to non-financial assets or liabilities that are recognized or disclosed at fair value in the Company’s financial statements on a recurring basis subsequent to the effective date of such accounting guidance. 
 
F-25
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company uses various valuation techniques, which are primarily based upon the market approach, with respect to its financial assets. As discussed in Note 3, a portion of the auction rate securities held by the Company experienced a significant credit rating reduction since their acquisition. As a result, investments in auction rate securities are valued utilizing a quantitative and qualitative third-party analysis. The Company therefore classifies these securities as Level 3.
 
The following table provides a reconciliation of the beginning and ending balances of items measured at fair value on a recurring basis that used significant unobservable inputs at December 31:
 
Auction rate securities      2009      2008
Beginning balance $ 3,509,250 $ 18,800,000
Total gains or (losses):
       Included in earnings (94,000 ) (1,270,750 )
       Included in other comprehensive income 40,500 (195,000 )
Settlements -      (13,825,000 )
Ending balance 3,455,750 3,509,250
Classified as long-term investments - held to maturity      (2,400,000 ) (2,400,000 )
Classified as long-term investments - available for sale securities $ 1,055,750 $ 1,109,250
 

Assets and Liabilities that are Measured at Fair Value on a Nonrecurring Basis:
 
The aspects of ASC 820 for which the effective date was deferred until January 1, 2009 relate to non-financial assets and liabilities that are measured at fair value but are recognized or disclosed at fair value on a nonrecurring basis.
 
At December 31, 2009, the Company recorded a $350,000 impairment related to a $1.4 million equity investment that is accounted for under the cost method as prescribed by ASC Topic 325-20 “Cost Method Investments”. During the fourth quarter, the Company considered the entity’s current and projected decreases in revenue to be an impairment indicator and consequently performed a fair value analysis. The resulting impairment of $350,000 was considered to be other-than-temporary and was recognized as a charge to other income.
 
Note 12. Material Commitments
 
The Company estimates that at December 31, 2009 and 2008, it had approximately $13.6 million and $16.3 million, respectively, of purchase commitments for inventory from vendors. The Company also rents certain of its facilities under non-cancellable operating leases, which expire through 2011. The Company intends to finance its purchase commitments from existing cash and investments or from cash flows from operations.
 
Aggregate future minimum annual rental payments in the years subsequent to December 31, 2009 are approximately as follows:
 
Year ending December 31,
2010 $      585,000
2011 470,000
     2012 130,000

Rent expense for the years ended December 31, 2009, 2008 and 2007 was approximately $589,000, $598,000 and $894,000, respectively.
 
F-26
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 13. Restructuring Activities
 
Beginning January 1, 2009, in North America the Company began selling its Fortus 3D Production Systems through a select group of resellers from its established reseller channel, which formerly distributed only the Dimension 3D Printer line. This restructuring of the Company’s sales organization included costs related to workforce reductions, closure of certain leased facilities, rebranding expenses, and other contract termination charges that were recognized in 2008 and were settled during the first quarter of 2009.
 
In addition, the Company took certain cost-saving measures in the first quarter of 2009 that lowered fixed costs and curtailed some discretionary spending while maintaining a focus on the key goals and objectives of the Company’s long-term strategy. These cost-saving measures resulted in a charge of $779,000 in the first quarter of 2009, consisting primarily of severance costs related to a reduction in force. Final severance payments were completed during the third quarter of 2009 and the unused portion of the provision, noted as “adjustments” in the table below, was recorded in income for the current period.
 
A summary of the activity of these restructuring and other costs recognized in the Statement of Operations caption “Selling, general and administrative” is as follows:
 
Employee- Contract
Related Items and Terminations and
     Benefits      Other      Total
Accrued balance as of December 31, 2008 $ 306,014 $ 66,881 $ 372,895
Expenses incurred 779,000   - 779,000
Cash payments   (810,707 )                     (66,881 ) (877,588 )
Adjustments                   (274,307 ) -        (274,307 )
Accrued balance as of December 31, 2009 $ - $ - $ -

Note 14. Accounting for Collaborative Arrangements
 
In 2008, the Company fulfilled its responsibilities under a three-year, $3.6 million agreement with a Fortune 500 global manufacturing company to jointly advance its proprietary FDM technology for rapid manufacturing applications. This agreement entitled the Company to receive reimbursement payments as it achieved specific milestones stated in the agreement. This effort was focused around the Company’s high-performance systems and resulted in the commercial release of the Fortus 900mc. Because receipt of these payments represent reimbursements of costs actually incurred under this joint development project, all payments received were recorded as offsets to the research and development expenditures and are therefore not recognized as revenue.
 
Due to the success of this initial arrangement, the Company is continuing this relationship under similar terms and objectives. During the years ended December 31, 2009, 2008, and 2007, approximately $2.2 million, $0.3 million, and 1.0 million, respectively, of research and development expenses were offset by payments that were received from this company.
 
Note 15. Foreign Currency Hedge
 
The Company invoices sales to certain European distributors in Euros and reported results are therefore subject to fluctuations in the exchange rates of that currency in relation to the United States dollar. The Company’s strategy is to hedge most of its Euro-denominated accounts receivable positions by entering into 30-day foreign currency forward contracts on a month-to-month basis to reduce the risk that its earnings will be adversely affected by changes in currency exchange rates. The Company does not use derivative financial instruments for speculative or trading purposes. The Company enters into 30-day foreign currency forward contracts on the last day of each month and therefore the notional value of the contract equals the fair value at the end of the reporting period. As such, there is no related asset or liability or unrealized gains or losses recorded on the Balance Sheet as of the end of the period. All realized gains and losses related to hedging activities are recorded in current period earnings under the Statement of Operations caption “Foreign currency transaction losses, net”. 
 
F-27
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company hedged between €2.8 million and €5.0 million during the year ended December 31, 2009 and between €2.5 million and €5.1 million during the year ended December 31, 2008 related to accounts receivable that were denominated in Euros. The foreign currency forward contracts resulted in a currency translation loss of approximately $115,000 for the year ended December 31, 2009 and a gain of approximately $235,000 for the year ended December 31, 2008.
 
The Company will continue to monitor exposure to currency fluctuations. Instruments that may be used to hedge future risks may include foreign currency forward, swap, and option contracts. These instruments may be used to selectively manage risks, but there can be no assurance that we will be fully protected against material foreign currency fluctuations.
 
Note 16. Common Stock
 
In August 2007, the Company effected a two-for-one stock split of the Company’s common stock in the form of a common stock dividend. Prior year share and per-share information has been retroactively adjusted to reflect the stock split.
 
The Company has a common stock repurchase program and repurchased no shares during the year ended December 31, 2009. The Company repurchased 1,089,575 shares of common stock during the year ended December 31, 2008. As of December 31, 2009, the Company had authorization to repurchase approximately $10.9 million of additional common stock.
 
F-28
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 17. Stock Options and Warrants
 
The Company has various stock option plans that have been approved by stockholders. After giving effect to the Company’s two-for-one stock split, the plans provided for the granting of options to purchase up to 4,825,000 shares of the Company’s common stock to qualified employees of the Company, independent contractors, consultants, and other persons. Of those 4,825,000 shares approved for grant, 3,712,634 have been granted, leaving 1,112,366 shares available to be granted by the Company as of December 31, 2009. Options principally vest immediately or ratably over five years and are exercisable over a period ranging from five years to six years and one-month. The information presented below has been adjusted to reflect the Company’s two-for-one stock split.
 
Weighted
Number Average
of Options Per Share Exercise
     Outstanding      Exercise Price      Price
Shares under option
       at January 1, 2007 2,305,822 $ 0.92     -     $      17.92 $ 13.01
Granted in 2007 260,000      20.75 - 26.15 23.11
Exercised in 2007 (720,894 ) 1.02 - 14.66 11.81
Expired in 2007 (15,900 ) 1.00 - 2.83 1.84
Forfeited in 2007 (27,000 ) 1.02 - 14.43 13.16
Shares under option
       at December 31, 2007 1,802,028 1.02 26.15 15.02
Granted in 2008 281,500 9.30 - 22.06 11.67
Exercised in 2008 (234,300 ) 1.67 - 14.43 13.78
Expired in 2008 (53,050 ) 1.02 - 14.30 11.78
Forfeited in 2008 (60,800 ) 12.49 - 23.04 15.05
Shares under option
       at December 31, 2008 1,735,378 2.54 - 26.15 14.42
Granted in 2009 283,750 8.27 - 9.90 9.82
Exercised in 2009 (294,400 ) 4.35 - 14.53 12.90
Expired in 2009 (122,800 ) 3.81 - 14.43 14.30
Forfeited in 2009 (82,300 ) 9.30 - 23.04 14.68
Shares under option
            at December 31, 2009       1,519,628 $ 8.27 - $ 26.15 $ 14.08

F-29
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
A summary of stock options exercisable at December 31, 2009, 2008 and 2007 is as follows:
 
Weighted
Number Average
of Per Share Exercise
     Shares      Exercise Price      Price
Options exercisable at
       December 31, 2009 735,478 $      8.27     -     $      26.15 $ 14.49
 
Options exercisable at
       December 31, 2008 1,199,078 $ 2.54 - $ 26.15 $ 13.57
 
Options exercisable at
       December 31, 2007 1,411,978 $ 1.67 - $ 17.92 $ 14.34
 

The following table summarizes information about stock options outstanding at December 31, 2009:
 
Options Outstanding Options Exercisable
Number Weighted- Number
Outstanding Average Weighted- Exercisable Weighted-
at Remaining Average at Average
Exercise December 31, Contractual Exercise December 31, Exercise
Prices      2009      Life in Years      Price      2009      Price
8.27 - 9.90 414,250 5.1 $ 9.57 38,700 $ 8.93
10.92 - 13.22 421,200 2.7 12.63 257,200 12.43
14.17 - 14.48 424,178 0.9 14.44 350,178 14.44
16.17 - 26.15 260,000 3.9 22.82 89,400 23.01
1,519,628 14.08 735,478 14.49
Aggregate
intrinsic value $ 6,257,438 $ 2,554,579
 

The weighted average life remaining on vested options is 1.6 years. The weighted average grant date fair value based on the Black-Scholes model was $3.59 for options granted in 2009. The Company issues new shares of common stock upon exercise of stock options. The total intrinsic value of options exercised was approximately $3.1 million in 2009, $1.1 million in 2008 and $5.8 million in 2007.
 
The Company used the Black-Scholes option-pricing model to determine the fair value of grants made in 2009, 2008 and 2007. The following assumptions were applied in determining the pro forma compensation cost:
 
     2009      2008      2007
Risk-free interest rate 2.0% 3.9% 3.3%
Expected option term 4.5 years 4.5 years 4.5 years
Expected price volatility 40% 43% 47%
Dividend yield - - -

F-30
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
The Company’s computation of expected volatility is based on a combination of historical and market-based implied volatility from traded options on the Company’s stock. The expected option term was calculated in accordance with ASC 718, Compensation – Stock Compensation. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury yield curve in effect at the time of grant.
 
There were no outstanding warrants to purchase the Company’s common stock at December 31, 2009. As part of the sale of common stock and of other agreements, the Company had issued warrants to purchase the Company’s common stock. During 2008, 59,639 net shares were issued as a result of the exercise of warrants. Stock warrants totaling 139,500 shares were exercised at an average price of $11.99 per share; 79,861 shares were surrendered as payment, in lieu of cash, at an average price of $20.95 per share. As of December 31, 2008, the Company had 310,500 warrants outstanding with exercise prices ranging from $11.56 to $13.82 with a weighted average price per share of $12.34. These remaining warrants expired on February 22, 2009 without being exercised.
 
As of December 31, 2007, the Company had 450,000 warrants outstanding with at average per share price of $12.23. No warrants were issued or exercised in 2007.
 
As of December 31, 2009, there was approximately $3.1 million of total unrecognized compensation expense related to unvested share-based compensation granted under the Company’s plans. That cost is expected to be recognized over a weighted-average period of 2.3 years. The fair value of options shares vested during the year 2009 was approximately $1.1 million.
 
Note 18. Litigation
 
The Company is a party to various legal matters, the outcome of which, in the opinion of management, will not have a material adverse effect on the financial position, results of operations or cash flows of the Company.
 
Note 19. Export Sales
 
Export sales were as follows for the years ended December 31:
 
        2009         2008         2007
    Europe $      26,308,543 $      37,430,146 $      27,144,055
    Asia Pacific 15,814,405 18,533,549 19,806,049
    Other 1,076,828 1,883,206 2,767,662
$ 43,199,776 $ 57,846,901 $ 49,717,766
 
At December 31, 2009 and 2008, accounts receivable included balances due from foreign customers of approximately $11.7 million and $13.8 million, respectively.
 
Note 20. Retirement Plan
 
The Company has a defined contribution retirement plan (the “Plan”) under the provisions of Section 401(k) of the Internal Revenue Code (“IRC”) that covers all eligible employees as defined in the Plan. Participants may elect to contribute up to 50% of pre-tax annual compensation, as defined by the Plan, up to a maximum amount prescribed by the IRC. The Company, at its discretion, makes matching contributions equal to the lesser of $3,000 or 3% of the participant’s annual compensation. The Company, at its discretion, may make additional contributions, also subject to IRC limitations. Due to the weak economy, the company suspended making discretionary matching contributions in February 2009. For the years ended December 31, 2009, 2008 and 2007 the Company made 401(k) Plan contributions of approximately $112,000, $578,000 and $506,000, respectively.
 
F-31
 


STRATASYS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 21. Quarterly Results (unaudited)
 
First Second Third Fourth
        Quarter         Quarter         Quarter         Quarter
2009
       Net sales $      23,144,801 $      24,648,277 $      24,329,396 $      26,233,758
       Gross profit 9,572,352 11,573,221 11,868,254 13,369,745
       Net income (loss) (703,929 ) 849,571 1,578,800 2,391,829
       Net income (loss) per common share:
              Basic $ (0.03 ) $ 0.04 $ 0.08 $ 0.12
              Diluted (0.03 ) 0.04 0.08 0.12
 
2008
       Net sales $ 30,707,689 $ 31,274,922 $ 30,569,428 $ 31,942,973
       Gross profit 17,363,877 17,308,370 15,814,438 15,925,634
       Net income 3,798,569 4,096,056 3,709,567 2,011,295
       Net income per common share:
              Basic $ 0.18 $ 0.20 $ 0.18 $ 0.10
              Diluted 0.18 0.19 0.18 0.10

Note 22. Subsequent Events
 
On January 18, 2010, the Company entered into a Master OEM Agreement (the “Agreement”) with Hewlett-Packard Company (“HP”). During the initial term of the Agreement, which expires September 30, 2011, the Company will develop and manufacture a line of FDM (“Fused Deposition Modeling”) 3D printers and related accessories and consumables exclusively for HP for resale under the HP brand in France, Germany, Italy, Spain and the United Kingdom. HP has agreed not to sell any other 3D printers manufactured by other companies throughout the world for the term of the Agreement. The term of the Agreement will be extended for additional one-year periods unless terminated on advance notice by either party. During the term of the Agreement, the Company has agreed not to sell comparable products covered by the Agreement directly or indirectly in the territory covered by the Agreement. The Agreement does not require HP to purchase any minimum quantity of products.
 
The Company expects the first products will be available to be shipped to HP customers in the first half of 2010. After the initial term or by mutual agreement, the territory in which HP will have the exclusive right to sell the 3D printers covered by the Agreement may be expanded to additional countries worldwide.
 
The Company also entered into a Protective Rights Agreement with HP in which the Company has agreed to notify HP if (i) the Company decides to engage in negotiations in response to an acquisition offer, (ii) the Company decides to investigate a potential acquisition of the Company, or (iii) the Company becomes aware of an offer to purchase securities that would result in an acquisition of the Company. The Protective Rights Agreement will terminate on the earlier of three months after termination of the Agreement or an acquisition of the Company.
 
On January 18, 2010, in connection with the Agreement and the Protective Rights Agreement, the Company issued a warrant to HP to purchase 500,000 shares of common stock at an exercise price of $17.78 per share (the “Warrant”), which vests immediately. The Company relied on the exemption from registration contained in Section 4(2) of the Securities Act of 1933, as amended, and Regulation D, Rule 506 thereunder, for the issuance of the Warrant. The Company expects to take a non-cash charge of approximately $5.0 million during the first quarter of 2010 related to the value of these warrants.
 
F-32
 


SCHEDULE II
VALUATION AND QUALIFYING ACCOUNTS AND RESERVES
Years Ended December 31, 2009, 2008, and 2007
COLUMN A         Column B         Column C - Additions Column D Column E
Balances at Charged to Balances
beginning costs and Charged to at end
Description of period expenses         other accounts         Deductions         of period
2009
Reserve for bad debts and allowances $      1,225,606 $      672,241 $      - $      772,735       1,125,112
Reserve for sales returns and other allowances 121,556 - - 121,556 -
 
2008
Reserve for bad debts and allowances 1,169,464 441,321 - 385,179 1,225,606
Reserve for sales returns and other allowances 191,006 - - 69,450 121,556
 
2007
Reserve for bad debts and allowances 1,097,193 749,977 - 677,706 1,169,464
Reserve for sales returns and other allowances 168,644 170,700 - 148,338 191,006

F-33
 


(b) Exhibits
 
EXHIBIT
NO.         DESCRIPTION
3.1   Restated Certificate of Incorporation of the Company.(8)
 
3.2   Amended and Restated By-Laws of the Company.(7)
 
10.1   Non-Competition Agreement between the Company and S. Scott Crump, dated October 15, 1990.(1)
 
10.2   Employee Confidentiality Agreement between the Company and S. Scott Crump, dated October 15, 1990.(1)
 
10.3   Stratasys, Inc. 1998 Incentive Stock Option Plan.(4)*
 
10.4   Stratasys, Inc. 2000 Incentive Stock Option Plan.(5)*
 
10.5   Stratasys, Inc. 2002 Long-Term Performance and Incentive Plan.(6)*
 
10.6   Stratasys, Inc. 2008 Long-Term Performance and Incentive Plan.(9)*
 
10.7   Form of Option Agreement for employees.(9)*
 
10.8   Form of Option Agreement for directors.(9)*
 
10.9   Assignment, dated October 23, 1989, from S. Scott Crump to the Company with respect to a patent application for an apparatus and method for creating three-dimensional objects.(3)
 
10.10   Assignment, dated June 5, 1992, from S. Scott Crump to the Company with respect to a patent application for a modeling apparatus for three dimensional objects.(3)
 
10.11   Assignment, dated June 1, 1994, from S. Scott Crump, James W. Comb, William R. Priedeman, Jr., and Robert Zinniel to the Company with respect to a patent application for a process and apparatus of support removal for three-dimensional modeling.(3)
 
10.12   Asset Purchase Agreement between the Company and IBM dated January 1, 1995.(2)
 
14.1   Code of Business Conduct and Ethics.(9)
 
21.1   Subsidiaries of the Company.(8)
 
23.1   Consent of Grant Thornton LLP.(10)
 
31.1   Certification pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.(10)
 
31.2   Certification pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.(10)



EXHIBIT
NO.         DESCRIPTION
32.1 Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.(10)
   
32.2 Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.(10)

(1) Incorporated by reference from the Company’s Registration Statement on Form SB-2 (File No. 33- 83638-C) filed September 2, 1994.
          
(2) Incorporated by reference from the Company’s Form 8-K, Amendment No. 2, dated January 1, 1995.
 
(3) Incorporated by reference from Amendment No. 1 to the Registration Statement on Form SB-2 (File No. 33-99108) filed December 20, 1995.
 
(4) Incorporated by reference from the Company’s definitive Proxy Statement on Schedule 14A with respect to the Company’s 1998 Annual Meeting of Stockholders.
 
(5) Incorporated by reference from the Company’s Registration Statement on Form S-8 (File No. 333- 32782) filed March 17, 2000.
 
(6) Incorporated by reference from the Company’s definitive Proxy Statement on Schedule 14A with respect to the Company’s 2002 Annual Meeting of Stockholders.
 
(7) Incorporated by reference from the Company’s Form 8-K filed July 31, 2007.
 
(8) Incorporated by reference from the Company’s Form 10-K for the year ended December 31, 2007.
 
(9) Incorporated by reference from the Company’s Form 10-K for the year ended December 31, 2008.
 
(10) Filed herewith.
 
*
Compensatory plan or arrangement.
 
(c) Other required financial statements
 
     All other schedules called for under Regulation S-X are not submitted because they are not applicable or not required, or because the required information is included in the financial statements or notes thereto.
 
     Separate financial statements of the Registrant have been omitted because the Registrant is primarily an operating company. All subsidiaries included in the consolidated financial statements are majority owned, and none of the subsidiaries have indebtedness that is not guaranteed by the Registrant.
 


SIGNATURES
 
     Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
STRATASYS, INC.
 
 
By:  /s/ S. SCOTT CRUMP         
S. Scott Crump
President
Dated:  March 8, 2010

     Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
 
Chairman of the Board of Directors,
/s/ S. SCOTT CRUMP President, Chief Executive Officer, March 8, 2010
S. Scott Crump Treasurer (Principal Executive
Officer)
 
/s/ ROBERT F. GALLAGHER Chief Financial Officer (Principal March 8, 2010
Robert F. Gallagher Financial and Accounting Officer)
 
 
/s/ RALPH E. CRUMP Director March 8, 2010
Ralph E. Crump
 
 
/s/ EDWARD J. FIERKO Director March 8, 2010
Edward J. Fierko  
 
 
/s/ JOHN J. MCELENEY Director March 8, 2010
John J. McEleney
 
 
/s/ CLIFFORD H. SCHWIETER Director March 8, 2010
Clifford H. Schwieter
 
 
/s/ GREGORY L. WILSON Director March 8, 2010
Gregory L. Wilson