10-K
Table of Contents

 

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

Form 10-K

þ

Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

or

 

¨

Transition report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

 

For the fiscal year ended:

December 31, 2013

 

Commission file number:

001-34365

 

 

COMMERCIAL VEHICLE GROUP, INC.

(Exact name of Registrant as specified in its charter)

 

Delaware   41-1990662
(State of Incorporation)   (I.R.S. Employer Identification No.)
7800 Walton Parkway   43054
New Albany, Ohio   (Zip Code)
(Address of Principal Executive Offices)  

Registrant’s telephone number, including area code:

(614) 289-5360

 

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

 

Name of exchange on which registered

Common Stock, par value $.01 per share   The NASDAQ Global Select Market

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨      No  þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Schedule 15(d) of the Act.    Yes  ¨      No  þ

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ      No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  þ      No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer  ¨            Accelerated filer  þ            Non-accelerated filer  ¨            Smaller reporting company  ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨      No  þ

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold on June 28, 2013, was $234,387,690.

As of March 14, 2014, 29,717,553, shares of Common Stock of the Registrant were outstanding.

Documents Incorporated by Reference

Information required by Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K is incorporated by reference from the Registrant’s Proxy Statement for its annual meeting to be held May 15, 2014 (the “2014 Proxy Statement”).

 

 

 

 


Table of Contents

COMMERCIAL VEHICLE GROUP, INC.

Annual Report on Form 10-K

Table of Contents

 

         Page  
PART I   

Item 1.

 

Business

     1   

Item 1A.

 

Risk Factors

     19   

Item 1B.

 

Unresolved Staff Comments

     32   

Item 2.

 

Properties

     33   

Item 3.

 

Legal Proceedings

     34   

Item 4.

 

Mine Safety Disclosures

     34   
PART II   

Item 5.

 

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

     35   

Item 6.

 

Selected Financial Data

     38   

Item 7.

 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

     40   

Item 7A.

 

Quantitative and Qualitative Disclosures About Market Risk

     54   

Item 8.

 

Financial Statements and Supplementary Data

     56   

Item 9.

 

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

     90   

Item 9A.

 

Controls and Procedures

     90   

Item 9B.

 

Other Information

     93   
PART III   

Item 10.

 

Directors, Executive Officers and Corporate Governance

     93   

Item 11.

 

Executive Compensation

     95   

Item 12.

 

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

     96   

Item 13.

 

Certain Relationships, Related Transactions and Director Independence

     96   

Item 14.

 

Principal Accountant Fees and Services

     96   
PART IV   

Item 15.

 

Exhibits and Financial Statements Schedules

     97   

SIGNATURES

     102   

 

i


Table of Contents

CERTAIN DEFINITIONS

All references in this Annual Report on Form 10-K to the “Company,” “Commercial Vehicle Group,” “CVG,” “we,” “us,” and “our” refer to Commercial Vehicle Group, Inc. and its consolidated subsidiaries (unless the context otherwise requires).

FORWARD-LOOKING INFORMATION

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended. For this purpose, any statements contained herein that are not statements of historical fact, including without limitation, certain statements under “Item 1 — Business” and “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations” and located elsewhere herein regarding industry outlook, financial covenant compliance, anticipated effects of acquisitions, production of new products, plans for capital expenditures and our results of operations or financial position and liquidity, may be deemed to be forward-looking statements. Without limiting the foregoing, the words “believes,” “anticipates,” “plans,” “expects,” and similar expressions are intended to identify forward-looking statements. The important factors discussed in “Item 1A — Risk Factors,” among others, could cause actual results to differ materially from those indicated by forward-looking statements made herein and presented elsewhere by management from time to time. Such forward-looking statements represent management’s current expectations and are inherently uncertain. Investors are warned that actual results may differ from management’s expectations. Additionally, various economic and competitive factors could cause actual results to differ materially from those discussed in such forward-looking statements, including, but not limited to, factors which are outside our control, such as risks relating to (i) general economic or business conditions affecting the markets in which we serve; (ii) our ability to develop or successfully introduce new products; (iii) risks associated with conducting business in foreign countries and currencies; (iv) increased competition in the heavy-duty truck or construction market; (v) our failure to complete or successfully integrate additional strategic acquisitions; (vi) the impact of changes in governmental regulations on our customers or on our business; (vii) the loss of business from a major customer or the discontinuation of particular commercial vehicle platforms; (viii) our ability to obtain future financing due to changes in the lending markets or our financial position and (ix) our ability to comply with the financial covenants in our revolving credit facility. All subsequent written and oral forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by such cautionary statements.

 

ii


Table of Contents

PART I

 

Item 1. Business

Overview

Commercial Vehicle Group, Inc. is a Delaware (USA) corporation. We were formed as a privately-held company in August 2000. We became a publicly held company in 2004. The Company (and its subsidiaries) is a leading supplier of a full range of cab related products and systems for the global commercial vehicle market, including the heavy-duty (Class 8) truck market, the medium-and heavy-construction vehicle markets, the military, bus, agriculture, specialty transportation, mining, industrial equipment and off-road recreational (ATV/UTV) markets.

The Company has manufacturing operations in the United States, Mexico, United Kingdom, Czech Republic, Ukraine, China, India and Australia. Our products are primarily sold in North America, Europe, China, India and the Asia/Pacific regions. To a lesser extent, the Company also derives revenue from South and Central America, the Middle East and Africa.

Our products include static and suspension seat systems, electronic wire harness assemblies, controls and switches, interior trim systems (including instrument panels, door panels, headliners, cabinetry and floor systems), cab structures and components, interior and exterior finishes and mirrors and wiper systems specifically designed for applications in commercial vehicles.

We are differentiated from automotive industry suppliers by our ability to manufacture low volume, customized products on a sequenced basis to meet the requirements of our customers. We offer complete cab systems, including cab body assemblies, sleeper boxes, seats, interior trim, exterior trim, flooring, wire harnesses, panel assemblies and other structural components. Our products are used by a large number of the North American heavy truck, certain leading global medium/heavy-construction original equipment manufacturers (“OEMs”), and off-road recreational vehicle manufacturers which we believe creates an opportunity to cross-sell our products and offer a full range of cab related products and systems.

Demand for our heavy truck products is generally dependent on the number of new heavy truck commercial vehicles manufactured in North America, which in turn is a function of general economic conditions, interest rates, changes in governmental regulations, consumer spending, fuel costs and our customers’ inventory levels and production rates.

New heavy truck commercial vehicle demand has historically been cyclical and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the freight tonnage hauled by commercial vehicles. In 2010, North American Class 8 production levels increased approximately 30 percent over 2009, indicating a recovery in the heavy truck market. This recovery continued into 2011 as North American Class 8 production levels increased approximately 66 percent from 2010. The North American Class 8 market showed a modest increase in 2012 as production levels increased approximately 9 percent over 2011. According to a January 2014 report by ACT Research, a publisher of industry market research, North American Class 8 production levels in 2013 decreased to 245,496 units from 278,720 in 2012. ACT anticipates production will peak at 290,000 units in 2015 and decline to 285,000 in 2018. We believe the demand for new North American Class 8 vehicles will be driven by several factors, including growth in freight volumes and the replacement of aging vehicles.

New commercial vehicle demand in the global construction equipment market generally follows certain economic conditions around the world. Within the global construction equipment market, there are two classes of construction equipment, the medium/heavy equipment market (weighing over 12 metric tons) and the light construction equipment market (weighing below 12 metric tons). Demand in the medium/heavy construction equipment market is typically related to the level of larger scale infrastructure development projects such as

 

1


Table of Contents

highways, dams, water infrastructure, harbors, hospitals, airports, non-residential building and industrial development, as well as activity in the mining, resource extraction, forestry and other raw material based industries. Demand in the light construction equipment market is typically related to certain economic conditions such as the level of housing construction and other smaller-scale developments and projects. Our construction equipment products are primarily used in the medium/heavy construction equipment markets, with a growing emphasis on light and utility machines. The platforms that we currently participate in include: cranes, pavers, planers & profilers, dozers, loaders, graders, haulers, tractors, excavators, backhoes, trucks and compactors. Following a strong 2011, the global construction market continued to improve in the first half of 2012. During the second half of 2012 OEMs responded to softer demand by reducing dealer and channel inventories which negatively impacted their production schedules. In 2013, the global construction market increased by 7 percent. We experienced a decline in our 2013 global construction revenues when compared to 2012, principally due to customer destocking and overall industry declines in all regions we serve. According to Millmark Associates, the global construction equipment market is expected to increase moderately in 2014.

Industry

Within the commercial vehicle industry, we sell our products primarily to the global OEM truck market (approximately 46% of our 2013 revenues), the global construction OEM market (approximately 21% of our 2013 revenues), the military market (approximately 2% of our 2013 revenues) and the aftermarket and original equipment service organizations (approximately 15% of our 2013 revenues). The majority of the remaining 16% of our 2013 revenues was derived from other global commercial vehicle and specialty markets.

Commercial Vehicle Supply Market Overview

Commercial vehicles are used in a wide variety of end markets, including local and long-haul commercial trucking, bus, construction, mining, agricultural, military, general industrial, municipal, off-road recreation (ATV and UTV) and specialty vehicle markets, (e.g., fire and refuse removal vehicles). The commercial vehicle supply industry can generally be separated into two categories: (1) sales to OEMs, in which products are sold in relatively large quantities directly for use by OEMs in new commercial and construction vehicles; and (2) “aftermarket” sales, in which products are sold as replacements in varying quantities to a wide range of original equipment service organizations, wholesalers, retailers and installers. In the OEM market, suppliers are generally divided into tiers — “Tier 1” suppliers (similar to our company), that provide products directly to OEMs, and “Tier 2” or “Tier 3” suppliers, that sell products principally to other suppliers for integration into those suppliers’ own product offerings.

Our largest end market, the North American commercial truck industry, is supplied by heavy- and medium-duty commercial vehicle suppliers, as well as automotive suppliers. The commercial vehicle supplier industry is fragmented and comprised of several large companies and many smaller companies. In addition, the commercial vehicle supplier industry is characterized by relatively low production volumes and can have considerable barriers to entry, including the following:, (1) specific technical and manufacturing requirements, (2) high transition costs to shift production to new suppliers, (3) just-in-time delivery requirements and (4) strong brand name recognition. Foreign competition is growing with the globalization of the world economy.

Although OEM demand for our products is directly correlated with new vehicle production, suppliers like us can grow by increasing sales through the cross selling and bundling of products, further penetrating existing customers’ businesses, gaining new customers, expanding into new geographic markets, developing new products to meet changing customer needs and by increasing aftermarket sales. We believe that companies with a global presence, advanced technology, engineering and manufacturing and support capabilities, such as our company, are well positioned to take advantage of these opportunities.

North American Commercial Truck Market

Purchasers of commercial trucks include fleet operators, owner operators, governmental agencies and industrial end users. Commercial vehicles used for local and long-haul commercial trucking are generally

 

2


Table of Contents

classified by gross vehicle weight. Class 8 vehicles are trucks with gross vehicle weight in excess of 33,000 lbs. and Class 5 through 7 vehicles are trucks with gross vehicle weight from 16,001 lbs. to 33,000 lbs. The following table shows commercial vehicle production levels from 2009 through 2013 in North America:

 

     2009      2010      2011      2012      2013  
     (Thousands of units)  

Class 8 heavy trucks

     118         154         255         279         245   

Class 5-7 light and medium-duty trucks

     98         118         167         189         153   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

     216         272         422         468         398   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

Source: ACT N.A. Commercial Vehicle OUTLOOK (January 2014).

The following describes the major markets within the commercial vehicle market in which we compete:

Class 8 Truck Market

The global Class 8 or heavy truck manufacturing market is concentrated in three primary regions: North America, Europe and Asia-Pacific. The global Class 8 / heavy truck market is localized in nature due to the following factors: (1) the prohibitive costs of shipping components from one region to another, (2) the high degree of customization of Class 8 trucks to meet the region-specific demands of end-users and (3) the ability to meet just-in-time delivery requirements.

In 2010, North American Class 8 production levels increased approximately 30% over the prior-year period. We believe that the increase from 2009 to 2010 was a result of the strengthening in the North American economy and corresponding increase in the need for commercial vehicles to haul freight tonnage in North America. The strengthening in the North American economy continued into 2011 and 2012 as North American Class 8 production levels increased approximately 9% over 2011. According to ACT, unit production for 2013 decreased 12% from 2012 levels to 245,496 units. ACT estimates 2014 Class 8 truck production in North America to be 275,000 units.

The following table illustrates North American Class 8 truck build for the years 2011 to 2018:

North American Class 8 Truck Build Rates

(In thousands)

 

LOGO

“E” — Estimated

Source: ACT Commercial Vehicle OUTLOOK (January 2014).

 

3


Table of Contents

We believe the following factors are currently driving the North American Class 8 truck market:

Economic Conditions.    The North American truck industry is directly influenced by overall economic growth, consumer spending and the ability of our customers to access capital. Since truck OEMs supply the fleet lines of North America, their production levels generally match the demand for freight. The freight carried by these trucks includes consumer goods, machinery, food and beverages, construction equipment and supplies, electronic equipment and a wide variety of other materials. Since most of these items are driven by macroeconomic conditions, the truck industry tends to follow trends of gross domestic product. Generally, given the dependence of North American shippers on trucking as a freight alternative, general economic conditions have been a primary indicator of future truck builds.

Truck Replacement Cycle and Fleet Aging.    The average age of active Class 8 trucks is approximately 6.6 years in 2013. The average fleet age tends to run in cycles as freight companies permit their truck fleets to age during periods of lagging demand and then replenish those fleets during periods of increasing demand. Additionally, as truck fleets age, their maintenance costs typically increase. Freight companies must therefore continually evaluate the economics between repair and replacement. We believe that during the recent economic downturn, and following the 2006 pre-buy overbuild, vehicle mileage was reduced disproportionately to chronological age of heavy trucks based on less utilization and may influence future builds over the next several years. The chart below illustrates the approximate average age of active U.S. Class 8 trucks:

Average Age of Active U.S. Class 8 Trucks

(In years)

 

LOGO

“E” — Estimated

Source: ACT N.A. Commercial Vehicle OUTLOOK (January 2014).

Commercial Truck Aftermarket

Demand for aftermarket products is driven by the quality of OEM parts, the number of vehicles in operation, the average age of the vehicle fleet, vehicle usage and the average useful life of vehicle parts. Aftermarket sales tend to be at a higher margin, as truck component suppliers are able to leverage their already established fixed cost base and exert moderate pricing power with their replacement parts. The recurring nature of aftermarket revenue can be expected to provide some insulation to the overall cyclical nature of the industry, as it tends to provide a more stable stream of revenues. Brand equity and the extent of a company’s distribution network also contribute to the level of aftermarket sales. CVG has a widely recognized brand portfolio and participates in most retail sales channels including Original Equipment Dealer networks and independent distributors.

Commercial Construction Vehicle Market

New vehicle demand in the global construction equipment market generally follows certain economic conditions around the world. Within the construction market, there are two classes of construction equipment markets: the

 

4


Table of Contents

medium/heavy construction equipment market (weighing over 12 metric tons) and the light construction equipment market (weighing below 12 metric tons). Demand in the medium/heavy construction equipment market is typically related to the level of larger-scale infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development as well as activity in the mining, forestry and other raw material based industries. Demand in the light construction equipment market is typically related to certain economic conditions such as the level of housing construction and other smaller scale developments and projects. Our products are primarily used in the medium/heavy construction equipment market. During 2010 and 2011, the global construction market showed signs of recovery following a significant decline in 2009. That recovery continued into the first half of 2012 followed by an overall decline in the market and a lower than expected build rate in the second half of 2012. The global construction market experienced a pickup in 2013 of seven percent. According to a January 2014 report by Millmark Associates, a publisher of industry market research, global production units in the construction market for the primary products we market (pavers, dozers, excavators, graders, skid steers, compactors and loaders), experienced a modest increase of two percent in 2013 and are expected to increase from approximately 1.5 million units in 2014 to 1.8 million in 2018. We, however, did not benefit from the 2013 construction growth due to destocking and industry declines experienced in all regions we serve. The chart below illustrates the continued estimated growth in the global construction market for the products in which we market from 2011 to 2018:

 

LOGO

“E” — Estimated

Source: Millmark Global Equipment Production (January 2014).

Purchasers of medium/heavy construction equipment include construction companies, municipalities, local governments, rental fleet owners, quarrying and mining companies and forestry related industries. Purchasers of light construction equipment include contractors, rental fleet owners, landscapers, logistics companies and farmers. In the medium/heavy construction equipment market, we primarily supply OEMs with our seating and wire harness products.

Military Equipment Market

We supply products for heavy- and medium-payload tactical trucks that are used by various military customers. Sales and production of these vehicles can be influenced by overall defense spending both by the U.S. government and foreign governments and the presence of military conflicts and potential military conflicts throughout the world. Demand for these vehicles has declined as a result of the United States’ reduced role in the conflicts in Iraq and Afghanistan and defense budget reductions and sequestration that have resulted in lower demand for tactical wheeled vehicles. Military equipment will continue to be a volatile end market and given current political and governmental budgetary considerations, we do not anticipate it will improve significantly in the near term.

Agricultural Equipment Market

We market and sell most of our full range of products for small, medium and large agricultural equipment across a spectrum of machines including tractors, sprayers, bailers, farm telehandler equipment and harvesters. Sales and

 

5


Table of Contents

production of these vehicles can be influenced by rising or falling farm commodity prices, land values, profitability and balance sheet health of farms, and other factors such as increased mechanization in emerging economies, new uses for crop materials such as biofuels and other factors. In the medium to longer term, a combination of factors create the need for more productive agricultural equipment, such as: (1) population growth, (2) an evolving sophistication of dietary habits, (3) constraints on arable land and other macroeconomic and demographic factors.

Commercial Vehicle Industry Trends

Our performance and growth opportunities are related to trends in the commercial vehicle market including globalization, operator retention, operator comfort and safety. These trends include among others:

Globalization of Suppliers.    Commercial vehicle OEMs manufacture and sell their products in various geographic markets around the world. Having operations in the geographic markets in which OEMs produce their global platforms enables suppliers to meet OEMs’ needs more economically and more efficiently.

Increasing Global Competition.    Increased global competition is becoming a factor for suppliers in the North American market as manufacturers outside the United States begin to develop opportunities to increase sales through the penetration of the U.S. heavy-truck and construction markets.

Shift of Design, Engineering and Research and Development to Suppliers.    OEMs are focusing their efforts on brand development and overall vehicle design, instead of the design of individual vehicle systems. OEMs are increasingly looking to their suppliers to provide suggestions for new products, designs, engineering developments and manufacturing processes. As a result, strategic suppliers are gaining increased access to confidential planning information regarding OEMs’ future vehicle designs and manufacturing processes. Strategic suppliers with the capability to design and engineer systems have a greater opportunity to increase their percentage of vehicle content.

Broad Manufacturing Capabilities.    OEMs are seeking suppliers to manufacture or assemble systems and products utilizing alternative materials and processes in order to meet their demand for customized styling, performance or cost requirements. In addition, while OEMs seek to differentiate their vehicles through the introduction of innovative features, suppliers are proactively developing new products and manufacturing capabilities and processes to meet OEMs’ requirements.

Ongoing Supplier Consolidation.    We believe the worldwide commercial vehicle supply industry is continuing to consolidate as suppliers seek to achieve operating synergies through business combinations, shift production to locations with more flexible labor rules and practices, acquire complementary technologies, build stronger customer relationships and follow their OEM customers as they expand globally. Furthermore, the cost focus of most major OEMs has forced suppliers to reduce costs and improve productivity on an ongoing basis, including economies of scale through consolidation. Financial distress created by the global economic conditions in recent years has also impacted the trend in consolidating suppliers.

Competitive Strengths

Our competitive strengths include, but are not limited to, the following:

Market Positions and Brands.    We believe we are a leading supplier of seating systems and soft interior trim products, one of a few non-captive manufacturers of structural components and body systems (which can include cab body assemblies) for the North American commercial vehicle heavy truck market and one of the largest global suppliers of medium/heavy construction vehicle seating systems. Our strong position in the North American truck business leads us to believe we have processes in place to design, manufacture and introduce products that meet customers’ expectations in that market. Our major product brands include CVG™, Sprague Devices®, Moto Mirror®, RoadWatch®, KAB Seating™, National Seating™, Bostrom Seating®, Stratos™, ComforTEK®, FlameTEK™, FinishTEK™ and Mayflower®.

 

6


Table of Contents

Comprehensive Cab Product and Cab System Solutions.    We manufacture a broad base of products, utilized in the interior and the exterior of a commercial vehicle cab. We also utilize a variety of different processes, such as urethane molding, injection molding, large composite molding, thermoforming and vacuum forming, which enable us to meet each customer’s unique styling and cost requirements. We believe the breadth of our product offerings provide us with a potential opportunity for further customer penetration through cross-selling initiatives and by bundling our products to provide complete system solutions.

End-User Focused Product Innovation.    We believe that commercial vehicle market OEMs continue to focus on interior and exterior product design features that better serve the vehicle operator, and therefore seek suppliers that can provide product innovation. In response, we have built an engineering and research and development organization to assist OEMs in meeting those needs. We believe this helps us secure content on new as well as current platforms and models.

Flexible Manufacturing Capabilities.    Because commercial vehicle OEMs permit their customers to select from an extensive menu of cab options, our end users frequently request modified products in low volumes within a limited time frame. We have a variable cost structure and can efficiently leverage our flexible manufacturing capabilities to provide low volume, customized products to meet each customer’s styling, cost and just-in-time delivery requirements. We manufacture or assemble our products at facilities in North America, Europe, Asia and Australia.

Global Capabilities.    Because many of our customers manufacture and sell their products on a global basis, we believe we have a competitive advantage through dedicated sales, engineering, manufacturing and assembly capabilities on a global basis. We have these capabilities to support our customers in North America, Europe, China, India and Australia.

Relationships with Leading Customers and Major North American Fleets.    Because of our comprehensive product offerings, brand names and product features, we believe we are a long-term global supplier to many of the leading heavy truck, construction and specialty commercial vehicle manufacturers such as PACCAR, Caterpillar, Volvo/Mack, Navistar, Daimler Trucks, Deere & Co., Oshkosh Corporation, Komatsu and Škoda (which is part of the Volkswagen Group). In addition, through our sales and engineering teams, we maintain active relationships with the major heavy-duty truck fleet organizations that are end-users of our products such as Schneider National, Werner, Walmart, FedEx and JB Hunt.

Barriers to Entry.    Barriers to entry including investment and specific engineering requirements, transition costs for OEMs to shift production to new suppliers, just-in-time delivery requirements and brand name recognition.

Proven Management Team.    We believe that our management team has substantial depth of knowledge and expertise in critical operational areas and has demonstrated success in reducing costs, improving processes and expanding revenue through product, market and customer diversification.

Corporate Strategy

Our primary strategies are as follows:

Geographic Diversification.    To reduce our dependence on the cyclical North American Class 8 heavy-truck market, we may selectively pursue strategic acquisitions or develop new business operations in geographic areas outside the United States. We have sought and continue to seek new and independent growth opportunities through marketing and business development activities with local producers in existing and new markets outside the United States. We believe that our larger growth opportunity is based on the development of end markets outside the mature North American market, principally in Asia. We are specifically targeting the Chinese construction, truck and agriculture end markets and have established a [production and research and development facility] in Shanghai to address the needs of multi-national construction equipment manufacturers operating there. While we intend to continue examining acquisition candidates that meet our strategic growth criteria, we currently anticipate more focus will be placed on our organic growth opportunities and global expansion plans.

 

7


Table of Contents

End Market Diversification.    To reduce our dependence on our current number of product lines, we intend to continue to diversify our product lines and offerings through a combination of acquisitions and engineering and research and development activities. We have recently added capabilities in the application of customized industrial hydrographic films, paints and other interior and exterior finishes for recreational (ATV/UTV) markets, and in the passenger, school and coach bus end markets through acquisitions. In addition, we have developed several new products including the GSX range of global, modular seating for global heavy truck applications; molded thermally and acoustically efficient flooring; blast-resistant seats and fire-resistant interior trim materials for military applications; and impact resistant cladding for medium-duty trucks and vans. We believe we have an opportunity to leverage our expertise with construction and agriculture products into stronger organic growth in North America. We are focused on securing additional sales from our existing customer base, and we actively cross-market a diverse portfolio of products to our customers to increase our content on the vehicles manufactured by OEMs.

Increase Sales to the Aftermarket.    While commercial vehicles have a relatively long life, certain components, such as seats, wipers and mirrors, are replaced more frequently. We believe this provides increased opportunities for our aftermarket products as the number of vehicles in operation and the number of miles driven per vehicle increases. We believe that there are opportunities to leverage our brand recognition to increase our sales to the replacement aftermarket.

Develop Industry-Leading Technologies.    To enhance our competitiveness and support our end-market diversification efforts, we continue to focus on research and development activities to meet the constantly evolving and market-specific demands of our global customers and their end-users. Current development initiatives include the ergonomics of operator safety and comfort and the management of acoustic, thermal, aerodynamic and weight-saving technologies that are unique to large commercial and construction vehicles. Through these efforts we seek to improve our processes, increase our manufacturing efficiencies and ultimately improve our operating margins with minimized additional capital expenditures.

Capitalize on Operating Leverage.    We continuously seek ways to lower costs, enhance product quality and improve manufacturing efficiencies, and we continue to utilize our Lean Manufacturing CVG Operating System (“CVGOS”) philosophy. We intend to continue to develop and implement operating excellence programs that will drive best practices, improve productivity, maximize efficiencies and improve quality in every one of our manufacturing facilities world-wide. To optimize our manufacturing capacity and operating margins, we continuously review changing customer needs and our manufacturing footprint. We look for opportunities to improve efficiencies through plant consolidations and/or closures, moving to one operating system and opening new plants to continue to provide timely delivery and quality products at competitive prices while improving margins.

Products

We offer OEMs a broad range of products and system solutions for a variety of end market vehicle applications that include local and long-haul commercial trucking, bus, construction, mining, agricultural, military, general industrial, municipal, recreational and specialty vehicle. We believe fleets and OEMs continue to focus on cabs and interiors to help differentiate their products and improve operator comfort and retention. Although a portion of our products are sold directly to OEMs as finished components, we also supply “systems” or “subsystems,” which are groups of component parts located throughout the vehicle that operate together to provide a specific vehicle function. Systems currently produced by us include cab bodies, sleeper boxes, seating, interior trim, body panels, storage cabinets, floor covering, mirrors, windshield wipers, headliners, temperature measurement devices and wire harnesses. We classify our products into five general categories: (1) seats and seating systems, (2) electronic wire harnesses and panel assemblies, (3) trim systems and components, (4) cab structures, sleeper boxes, body panels and structural components and (5) mirrors, wipers and controls.

See Notes 2 and 10 to our audited consolidated financial statements in Item 8 in this Annual Report on Form 10-K for information on our significant customer revenues and related receivables, as well as revenues by product category and geographical location.

 

8


Table of Contents

Set forth below is a brief description of our products and their applications:

Seats and Seating Systems.    We design, engineer and produce seating systems for medium and heavy duty trucks, bus applications, special purpose vehicles, and for commercial vehicles used in the construction and agricultural industries. For the most part, our seats and seating systems are fully-assembled and ready for installation when they are delivered to the OEM. We offer a wide range of seats that include mechanical and air suspension seats, static seats and bus seats. As a result of our product design and product technology, we are a leader in designing seats with convenience features and enhanced safety. Seats and seating systems are the most complex and highly specialized products of our five product categories. Set forth below is a brief description of our principal products in this category:

Heavy Truck Seats.    We produce seats and seating systems for heavy trucks primarily in our North American operations, but also in China, Europe and Australia. Our heavy truck seating systems are designed to achieve maximum operator comfort by adding a wide range of manual and power features such as lumbar supports, cushion and back bolsters and leg and thigh supports. Our seats are built to meet customer requirements in low volumes and produced in numerous feature combinations to form a full-range product line with a wide level of price points.

Construction and Other Commercial Vehicle Seats.    We produce seats and seating systems for commercial vehicles used in the global construction and agricultural, bus, military, commercial transport and municipal industries. The principal focus of these seating systems is durability and operator safety. These seats are ergonomically designed for difficult working environments and to provide comfort and control throughout the range of seats.

Specialty and Other Seating Products.    We also manufacture office seating products. Our office chair was developed as a result of our experience supplying seats for the heavy truck, agricultural and construction industries and is fully adjustable to maximize comfort at work. Our office chairs are designed to suit many different office environments, such as emergency services, call centers, receptions, studios, boardrooms and general office.

Electronic Wire Harnesses and Panel Assemblies.    We produce a wide range of electronic wire harnesses and electrical distribution systems and related assemblies as well as panel assemblies used in commercial vehicles, engines, generators and other equipment. Set forth below is a brief description of our principal products in this category.

Electronic Wire Harnesses.    We offer a broad range of complex electronic wire harness assemblies that function as the primary current carrying devices used to provide electrical interconnections for gauges, lights, control functions, power circuits, powertrain and transmission sensors, emissions systems and other electronic applications on commercial vehicles. Our wire harnesses are highly customized to fit specific end-user requirements. We provide our wire harnesses for a wide variety of commercial vehicles, tactical vehicles, specialty trucks, automotive and other specialty applications, including heavy construction and forestry machines and mining trucks.

Panel Assemblies.    We assemble large, integrated components such as panel assemblies and cabinets for commercial vehicle OEMs and other heavy equipment manufacturers. The panels and cabinets we assemble are installed in key locations on a vehicle or unit of equipment, are integrated with our wire harness assemblies and provide user control over multiple operational functions and features.

Trim Systems and Components.    We design, engineer and produce trim systems and components mostly for the interior cabs of commercial vehicles, but have recently increased our product offerings to include exterior cladding as well. Our trim products are designed to provide a comfortable and durable interior for the vehicle

 

9


Table of Contents

occupants, as well as a variety of functional and safety features. The wide variety of features that can be selected by the heavy truck customer makes trim systems and components a complex and highly specialized product category. Set forth below is a brief description of our principal products in this category:

Trim Products.    Our trim products include door panels and other interior trim panels. Specific components include vinyl or cloth-covered appliqués, armrests, map pocket compartments, carpet and sound-reducing insulation. Our products are attractive, lightweight solutions from a traditional cut and sew approach to a contemporary “molded” styling theme.

Instrument Panels.    We produce and assemble instrument panels that can be integrated with the rest of the interior trim. The instrument panel is a complex system of coverings and foam, plastic and metal parts designed to house various components and act as a safety device for the vehicle occupant.

Body Panels (Headliners/Wall Panels).    Headliners consist of a substrate and a finished interior layer made of fabrics and other materials. While headliners are an important contributor to interior aesthetics, they also provide insulation from road noise and can serve as carriers for a variety of other components, such as visors, overhead consoles, grab handles, coat hooks, electrical wiring, speakers, lighting and other electronic and electrical products.

Storage Systems.    Our modular storage units and custom cabinetry are designed to improve comfort and optimize space for the operator. These storage systems are designed to be integrated with the interior trim. Our storage systems are constructed with durable materials and designed to last the life of the vehicle.

Floor Covering Systems.    We have an extensive and comprehensive portfolio of floor covering systems and dash insulators. Carpet flooring systems generally consist of tufted or non-woven carpet with a thermoplastic backcoating. Non-carpeted flooring systems, used primarily in commercial and fleet vehicles, offer improved wear and maintenance characteristics.

Sleeper Bunks.    We offer a wide array of design choices for upper and lower sleeper bunks for heavy trucks. All parts of our sleeper bunks can be integrated to match the rest of the interior trim. The dash insulator separates the passenger compartment from the engine compartment and prevents engine noise and heat from entering the passenger compartment.

Grab Handles and Armrests.    Our grab handles and armrests are designed and engineered with specific attention to aesthetics, ergonomics and strength.

Privacy Curtains.    We produce privacy curtains for use in sleeper cabs.

Plastics Decorating and Finishing.    We offer customers a wide variety of cost-effective finishes in paint, ultra violet, hard coating and customized industrial hydrographic films, paints and other interior and exterior finishes (simulated appearance of wood grain, carbon fiber, brushed metal, marbles, camouflage and custom patterns) used primarily in the heavy-truck and recreational vehicle (ATVs and UTVs) markets.

Cab Structures, Sleeper Boxes, Body Panels and Structural Components.    We design, engineer and produce complete cab structures, sleeper boxes, body panels and structural components for the commercial vehicle industry in North America. Set forth below is a description of our principal products in this category:

Cab Structures.    We design, manufacture and assemble complete cab structures used primarily in heavy trucks for major commercial vehicle OEMs in North America. Our cab structures, which are manufactured from both steel and aluminum, are delivered fully assembled and primed for paint.

Sleeper Boxes.    We design, manufacture and assemble sleeper boxes primarily for heavy trucks in North America. We manufacture both integrated sleeper boxes that are part of the overall cab structure as well as standalone assemblies depending on the customer application.

 

10


Table of Contents

Bumper Fascias and Fender Liners.    Our highly durable, lightweight bumper fascias and fender liners are capable of withstanding repeated impacts that could deform an aluminum or steel bumper.

Body Panels and Structural Components.    We produce a wide range of both steel and aluminum large exterior body panels and structural components for use in production of our cab structures and sleeper boxes.

Mirrors, Wipers and Controls.    We design, engineer and produce a wide range of mirrors, wipers and controls used in commercial vehicles. Set forth below is a brief description of our principal products in this category:

Mirrors.    We offer a wide range of round, rectangular, motorized and heated mirrors and related hardware, including brackets, braces and side bars. We have introduced both road and outside temperature devices that can be integrated into the mirror face or the vehicle’s dashboard through our RoadWatchTM family of products. These systems are principally utilized by municipalities throughout North America to monitor surface temperatures and assist them in efficiently dispersing chemicals for snow and ice removal.

Windshield Wiper Systems.    We offer application-specific windshield wiper systems and individual windshield wiper components for the commercial vehicle market.

Controls.    We offer a range of controls and control systems for window lifts, door locks and electric switch products.

Manufacturing

A description of the manufacturing processes we utilize for each of our principal product categories is set forth below:

 

   

Seats and Seating Systems.    Our seating operations utilize a variety of manufacturing techniques whereby foam and various other components along with fabric, vinyl or leather are affixed to an underlying seat frame. We also manufacture and assemble the seat frame, which involves complex welding. Generally, we utilize outside suppliers to produce the individual sub-components used to assemble the seat frame.

 

   

Electronic Wire Harnesses and Panel Assemblies.    We utilize several manufacturing techniques to produce the majority of our electronic wire harnesses and panel assemblies. Our processes, both manual and automated, are designed to produce complex, low- to medium-volume wire harnesses and panel assemblies in short time frames. Our wire harnesses and panel assemblies are both electronically and hand tested.

 

   

Trim Systems and Components.    Our trim systems process capabilities include injection molding, low-pressure injection molding, urethane molding and foaming processes, compression molding, heavy-gauge thermoforming and vacuum forming as well as various cutting, sewing, trimming and finishing methods.

 

   

Cab Structures, Sleeper Boxes, Body Panels and Structural Components.    We utilize a wide range of manufacturing processes to produce the majority of the steel and aluminum stampings used in our cab structures, sleeper boxes, body panels and structural components and a variety of both robotic and manual welding techniques in the assembly of these products. In addition, we have facilities with large capacity, fully automated E-coat paint priming systems allowing us to provide our customers with a paint-ready cab product. Due to their high cost, full body E-coat systems, such as ours, are rarely found outside of the manufacturing operations of the major OEMs. We also have large press lines which provide us with the in-house manufacturing flexibility for both aluminum and steel stampings delivered just-in-time to our cab assembly plants.

 

11


Table of Contents
   

Mirrors, Wipers and Controls.    We manufacture our mirrors, wipers and controls utilizing a variety of manufacturing processes and techniques. Our mirrors, wipers and controls are primarily assembled, utilizing semi-automatic work cells, electronically tested and packaged.

We have a broad array of processes to enable us to meet our commercial vehicle OEM customers styling and cost requirements. The vehicle cab is the most significant and appealing aspect to the operator of the vehicle, and consequently each commercial vehicle OEM has unique requirements as to feel, appearance and features.

The end markets for our products are highly specialized and our customers frequently request modified products in low volumes within an expedited delivery timeframe. As a result, we primarily utilize flexible manufacturing cells at the vast majority of our production facilities. Manufacturing cells are clusters of individual manufacturing operations and work stations grouped in a circular configuration, with the operators placed centrally within the configuration. This provides flexibility by allowing efficient changes to the number of operations each operator performs. When compared to the more traditional, less flexible assembly line process, cell manufacturing allows us to maintain our product output consistent with our OEM customers’ requirements and reduce the level of inventory.

When an end-user buys a commercial vehicle, the end-user will specify the seat and other features for that vehicle. Because each of our seating systems is unique, our manufacturing facilities have significant complexity which we manage by building in sequence. We build our seating systems as orders are received, and systems are delivered to the customer’s rack in the sequence in which vehicles come down the assembly line. We have systems in place that allow us to provide complete customized interior kits in boxes that are delivered in sequence. In many instances, we keep track of our build sequence by product identification numbers and components are identified by bar code. Sequencing reduces our cost of production because it eliminates warehousing costs and reduces waste and obsolescence, offsetting any increased labor costs. Several of our manufacturing facilities are strategically located near our customers’ assembly plants, which facilitates this process and minimizes shipping costs.

We employ just-in-time manufacturing and system sourcing in our operations to meet customer requirements for faster deliveries and to minimize our need to carry significant inventory levels. We utilize material systems to manage inventory levels and, in certain locations, we have inventory delivered as often as two times per day from a nearby facility based on the previous day’s order. This eliminates the need to carry excess inventory at our facilities.

Within our cyclical industry, we strive to maintain a certain portion of temporary labor to improve our ability to flex our costs and throughput as required by customer demand. We balance this by engaging our core employees to assist in making our processes efficient and improving our ability to realign capacity during fluctuating periods of increased or decreased production levels to achieve on-time delivery.

Raw Materials and Suppliers

A description of the principal raw materials we utilize for each of our principal product categories is set forth below:

 

   

Seats and Seating Systems.    The principal raw materials used in our seating systems include steel, aluminum, resin-based products and foam related products and are generally readily available and obtained from multiple suppliers under various supply agreements. Leather, vinyl, fabric and certain components are also purchased from multiple suppliers under supply agreements. Typically, our supply agreements are for a term of at least one year and are terminable by us for breach or convenience.

 

   

Electronic Wire Harnesses and Panel Assemblies.    The principal raw materials used to manufacture our electronic wire harnesses are wire and cable, connectors, terminals, switches, relays and various covering techniques involving braided yarn, braided copper, slit and non-slit conduit and foam molded via the reaction injection molding process. These raw materials are obtained from multiple suppliers and are generally readily available.

 

12


Table of Contents
   

Trim Systems and Components.    The principal raw materials used in our interior systems processes are resin and chemical products, foam, vinyl and fabric which are formed and assembled into end products. These raw materials are obtained from multiple suppliers, typically under supply agreements which are for a term of typically one year or more and terminable by us for breach or convenience.

 

   

Cab Structures, Sleeper Boxes, Body Panels and Structural Components.    The principal raw materials used in our cab structures, sleeper boxes, body panels and structural components are steel and aluminum, the majority of which we purchase in sheets. These raw materials are generally readily available and obtained from several suppliers, typically under purchase contracts which fix price and supply for up to one year.

 

   

Mirrors, Wipers and Controls.    The principal raw materials used to manufacture our mirrors, wipers and controls are steel, stainless steel and rubber, which are generally readily available and obtained from multiple suppliers. We also purchase sub-assembled products such as motors for our wiper systems and mirrors.

Our supply agreements generally provide for fixed pricing but do not require us to purchase any specified quantities. We have not experienced any significant shortages of raw materials and normally do not carry inventories of raw materials or finished products in excess of those reasonably required to meet production and shipping schedules, as well as service requirements. Steel, aluminum, petroleum-based products, copper, resin, foam, fabrics, wire and wire components comprise the most significant portion of our raw material costs. We typically purchase steel, copper and petroleum-based products at market prices that are fixed over varying periods of time less than a year. Due to the volatility in pricing over the last several years, we are using tools such as market index pricing and competitive bidding to assist in reducing our overall cost. We continue to closely align our customer pricing and material costs to minimize the impact of steel, copper and petrochemical price fluctuations. Certain component purchases and suppliers are directed by our customers, so we generally will pass through directly to the customer any cost changes from these components. We do not believe we are dependent on a single supplier or limited group of suppliers for our raw materials.

Customers and Marketing

We sell our products principally to the commercial vehicle OEM truck and construction markets. The following is a summary of our significant revenues by end market based on final destination customers and markets for each of the three years ended December 31:

 

     2013     2012     2011  

Heavy Truck OEM

     46     50     47

Construction

     21        23        25   

Aftermarket and OE Service

     15        13        14   

Other

     18        14        14   
  

 

 

   

 

 

   

 

 

 

Total

     100     100     100

Our principal customers include A.B. Volvo, PACCAR, Daimler Trucks and Caterpillar. We are a successful long-term supplier because of our comprehensive product offerings, leading brand names and product innovation. We have a manufacturing presence in China and through our marketing efforts in China we have started to capture business in both the truck and construction markets.

 

13


Table of Contents

The following is a summary of our significant revenues based on customers for the three years ended December 31:

 

     2013     2012     2011  

A.B. Volvo

     16     15     14

PACCAR

     15        19        18   

Daimler Trucks

     14        15        13   

Caterpillar

     8        10        11   

Other

     47        41        44   
  

 

 

   

 

 

   

 

 

 

Total

     100     100     100

Except as set forth in the above table, no other customer accounted for more than 10% of our revenues for the three years ended December 31, 2013.

Our European, Asian, Australian and Mexican operations collectively contributed approximately 25%, 21% and 24% of our revenues for the years ended December 31, 2013, 2012 and 2011, respectively. The change in revenue by geographic location in 2013 is primarily related to the impact of the economic conditions in North America, as well as these regions of the world and the related impact on end market demand.

Our OEM customers generally source business to us pursuant to written contracts, purchase orders or other firm commitments in terms of price, quality, technology and delivery. Awarded business generally covers the supply of all or a portion of a customer’s production and service requirements for a particular product program rather than the supply of a specific quantity of products. In general, these contracts, purchase orders and commitments provide that the customer can terminate the contract, purchase order or commitment if we do not meet specified quality, delivery and cost requirements. Although these contracts, purchase orders or other commitments may be terminated at any time by our customers (but not by us), such terminations have been minimal and have not had a material impact on our results of operations. In an effort to reduce our reliance on any one vehicle model, we produce products for a broad cross section of both new and more established models.

Generally, our contracts with our major OEM customers may provide for an annual prospective productivity cost reduction. These productivity cost reductions are generally calculated on an annual basis as a percentage of the previous year’s purchases by each customer. The reduction is achieved through engineering changes, material cost reductions, logistics savings, reductions in packaging cost and labor efficiencies. Historically, most of these cost reductions have been offset by both internal reductions and through the assistance of our supply base, although no assurances can be given that we will be able to achieve such reductions in the future. Our cost structure consists of a high percentage of variable costs that provides us with additional flexibility during economic cycles.

Our sales and marketing efforts with respect to our OEM sales are designed to create overall awareness of our engineering, design and manufacturing capabilities and to enable us to be selected to supply products for new and redesigned models by our OEM customers. Our sales and marketing staff work closely with our design and engineering personnel to prepare the materials used for bidding on new business, as well as to provide a consistent interface between us and our key customers. We currently have sales and marketing personnel located in every major region in which we operate. From time to time, we also participate in industry trade shows and advertise in industry publications.

Our principal customers for our aftermarket sales include OEM dealers and independent wholesale or retail distributors. Our sales and marketing efforts for our aftermarket sales are focused on support of these two distribution chains, as well as participation in industry trade shows and direct contact with major fleets.

Backlog

We do not generally obtain long-term, firm purchase orders from our customers. Rather, our customers typically place annual blanket purchase orders, but these orders do not obligate them to purchase any specific or

 

14


Table of Contents

minimum amount of products from us until a release is issued by the customer under the blanket purchase order. Releases are typically placed within 30 to 90 days of required delivery and may be canceled at any time. We do not believe that our backlog of expected product sales covered by firm purchase orders is a meaningful indicator of future sales since orders may be rescheduled or canceled.

Competition

Within each of our principal product categories, we compete with a variety of independent suppliers and with OEMs’ in-house operations, primarily on the basis of price, breadth of product offerings, product quality, technical expertise, development capability, product delivery and product service. A summary of our estimated market position and primary independent competitors is set forth below:

Seats and Seating Systems.    We believe we have a strong market position in North America supplying seats and seating systems to the commercial vehicle heavy truck market. We also believe we have a strong market position in the medium/heavy construction equipment industry on a worldwide basis. Our primary independent competitors in the North American commercial vehicle market include Sears Manufacturing Company, Isringhausen, Grammer AG and Seats, Inc., and our primary competitors in the European and Asian commercial vehicle market include Grammer AG; Isringhausen; Rong Chang and Tiancheng (China); Hanil (Korea), Harita and Pinnacle (India).

Electronic Wire Harnesses and Panel Assemblies.    We supply low-to-medium-volume complex, electronic wire harnesses and related assemblies used in the global heavy equipment, commercial vehicle, heavy truck and specialty and military vehicle markets. Our principal competitors for electronic wire harnesses include large diversified suppliers such as Delphi Automotive PLC, Leoni, Nexans SA, PKC Group, Stoneridge, St. Clair and Fargo Assembly as well as many smaller independent companies.

Trim Systems and Components.    We believe we have a strong position in the North American commercial vehicle heavy truck market with respect to our soft interior trim products and a leading presence in the hard interior trim market. We face competition from a number of different competitors with respect to each of our trim system products and components. Overall, our primary independent competitors are ConMet, Inteva, Superior, Blachford Ltd. and Magna.

Cab Structures, Sleeper Boxes, Body Panels and Structural Components.    We are a strong non-captive supplier in the North American commercial vehicle heavy truck market with respect to our cab structural components, cab structures, sleeper boxes and body panels. Our principal competitors are Magna, International Equipment Solutions (formerly Crenlo), Worthington Industries (formerly Angus Palm), McLaughlin Body Company and Defiance Metal Products.

Mirrors, Wipers and Controls.    We are a strong supplier in the North American commercial vehicle heavy truck market with respect to our windshield wiper systems and mirrors. We face competition from a number of different competitors with respect to each of our principal products in this category. Our principal competitors for mirrors are Hadley, Retrac, and Lang-Mekra. Our principal competitors for windshield wiper systems are Doga, Wexco, Trico and Valeo.

Research and Development

Our research and development centers support our ability to offer superior quality and technologically advanced products to our customers at competitive prices. We offer industrial engineering, product design, CAE/FEA simulation and testing and evaluation services that are necessary in today’s global markets. With our resources for acoustics, thermal efficiency, benchmarking, multi-axis durability, biomechanics, comfort, prototyping and process prove-out, we design complete integrated solutions for the end-user (heavy and medium duty trucks, construction and agriculture vehicles and niche vehicles) supporting the fleet manager and the OEM.

 

15


Table of Contents

We engage in global engineering and research and development activities that improve the reliability, performance and cost-effectiveness of our existing products and support the design and development and testing of new products for existing and new applications.

We work with our customers’ engineering and development teams at the beginning of the concept design process for new components and assemblies and systems, or the re-engineering processes for existing components and assemblies, in order to leverage production efficiency and quality. These processes take place well in advance of production. Due to the compressive nature of our business, development time is critical. Our customers are continuously searching for advanced products while maintaining cost, quality and performance deliverables.

Product development cycles are lessening every year and we believe we are staffed with experienced engineers and have equipment and technology to support early design involvement that can result in products that meets or exceeds the customer’s design and performance requirements and is more efficient to manufacture. In addition, our ability to support our products and customers with extensive involvement enhances our position for bidding on such business. We work aggressively to ensure that our quality and delivery metrics distinguish us from our competitors by focusing on delivering our customers integrated products that have superior content, comfort and safety.

Consistent with our value-added engineering focus, we place a large emphasis on the relationships with the engineering departments of our customers. These relationships not only help us to identify new business opportunities but also enable us to compete based on the quality of our products and services, rather than exclusively on price.

Research and development costs expensed for the year ended December 31, 2013 totaled $6.0 million.

Intellectual Property

Our principal intellectual property consists of product and process technology, a limited number of U.S. and foreign patents, trade secrets, trademarks and copyrights. Although our intellectual property is important to our business operations and in the aggregate constitutes a valuable asset, we do not believe that any single patent, trade secret, trademark or copyright, or group of patents, trade secrets, trademarks or copyrights is critical to the success of our business. Our policy is to seek statutory protection for all significant intellectual property embodied in patents, trademarks and copyrights. As we diversify and globalize our geography, we may encounter localized laws and practices that are not as stringent or enforceable as those in developed markets and thus risk intellectual property infringement.

Our major product brands include CVG™, Sprague Devices®, Moto Mirror®, RoadWatch®, KAB Seating™, National Seating™, Bostrom Seating®, Stratos™, ComforTEK®, FlameTEK™, FinishTEK™ and Mayflower®. We believe that our brands are valuable and are increasing in value with the growth of our business, but that our business is not dependent on such brands. We own U.S. federal trademark registrations for several of our brands.

Seasonality

OEMs’ production requirements can fluctuate as the demand for new vehicles softens during the holiday seasons in North America, Europe, Asia and Australia as OEM manufacturers generally close their production facilities, reducing work days, at various times during the year.

Employees

As of December 31, 2013, we had approximately 6,480 permanent employees, of whom approximately 18% were salaried and the remainders hourly. As of December 31, 2013, approximately 52% of the employees in our

 

16


Table of Contents

North American operations were unionized, with the majority of union represented personnel based in Mexico. Approximately 63% of our employees of our European, Asian and Australian operations were represented by shop steward committees. We did not experience any material strikes, lockouts or work stoppages during 2013 and consider our relationship with our employees to be satisfactory. On an as-needed basis during peak periods, contract and temporary employees are utilized. During periods of weak demand, we respond to reduced volumes through flexible scheduling, furloughs and reductions in force as necessary.

Environmental Matters

We are subject to foreign, federal, state and local laws and regulations governing the protection of the environment and occupational health and safety, including laws regulating air emissions, wastewater discharges, and the generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the soil, ground or air; and the health and safety of our colleagues. We are also required to obtain permits from governmental authorities for certain of our operations. We cannot assure you that we are, or have been, in complete compliance with such environment and safety laws, regulations and permits. If we violate or fail to comply with these laws, regulations or permits, we could be fined or otherwise sanctioned by regulators. In some instances, such a fine or sanction could have a material adverse effect on us. We are also subject to laws imposing liability for the cleanup of contaminated property. Under these laws, we could be held liable for costs and damages relating to contamination at our past or present facilities and at third-party sites to which we sent waste containing hazardous substances. The amount of such liability could be material.

Several of our facilities are either certified as, or are in the process of being certified as, ISO 9001, 14000 or 14001 (the international environmental management standard) compliant or are developing similar environmental management systems. Although we have made, and will continue to make, capital expenditures to implement such environmental programs and comply with environmental requirements, we do not expect to make material capital expenditures for environmental controls in 2014. The environmental laws to which we are subject have become more stringent over time, and we could incur material costs or expenses in the future to comply with environmental laws.

Certain of our operations generate hazardous substances and wastes. If a release of such substances or wastes occurs at or from our properties, or at or from any offsite disposal location to which substances or wastes from our current or former operations were taken, or if contamination is discovered at any of our current or former properties, we may be held liable for the costs of cleanup and for any other response by governmental authorities or private parties, together with any associated fines, penalties or damages. In most jurisdictions, this liability would arise whether or not we had complied with environmental laws governing the handling of hazardous substances or wastes.

Government Regulations

Although the products we manufacture and supply to commercial vehicle OEMs are not subject to significant government regulation, our business is indirectly impacted by the extensive governmental regulation applicable to commercial vehicle OEMs. These regulations primarily relate to emissions and noise standards imposed by the Environmental Protection Agency (“EPA”), state regulatory agencies, such as the California Air Resources Board (“CARB”), and other regulatory agencies around the world. Commercial vehicle OEMs are also subject to the National Traffic and Motor Vehicle Safety Act and Federal Motor Vehicle Safety Standards promulgated by the National Highway Traffic Safety Administration. Changes in emission standards and other proposed governmental regulations could impact the demand for commercial vehicles and, as a result, indirectly impact our operations. For example, in 2011, the EPA and National Highway Traffic Safety Administration adopted a program to reduce greenhouse gas emissions and improve the fuel efficiency of medium-and heavy-duty vehicles. These standards will phase in with increasing stringency in each model year from 2014 to 2018. Any changes in EPA or CARB regulations can have an impact on production volumes for new vehicles and, as a

 

17


Table of Contents

result, indirectly impact our operations. To the extent that current or future governmental regulation has a negative impact on the demand for commercial vehicles, our business, financial condition or results of operations could be adversely affected.

Available Information

We maintain a website on the Internet at www.cvgrp.com. We make available free of charge through our website, by way of a hyperlink to a third-party Securities Exchange Commission (SEC) filing website, our Annual Reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports electronically filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act of 1934. Such information is available as soon as such reports are filed with the SEC. Additionally, our Code of Ethics may be accessed within the Investor Relations section of our website. Information found on our website is not part of this Annual Report on Form 10-K or any other report filed with the SEC.

Executive Officers of Registrant

The following table sets forth certain information with respect to our executive officers as of March 14, 2014:

 

Name

   Age   

Principal Positions

Kevin R.L. Frailey

   47    President of Electrical Systems

Timo Haatanen

   44    President of Global Aftermarket and Structures

Richard P. Lavin

   61    President and Chief Executive Officer and Director

Patrick Miller

   46    President of Global Truck and Bus

C. Timothy Trenary

   57    Executive Vice President and Chief Financial Officer

The following biographies describe the business experience of our executive officers:

Kevin R.L. Frailey has served as President of Global Construction, Agriculture and Military since August 2013. Mr. Frailey served as President and General Manager of Global Electrical Systems from July 2010 to July 2013. From December 2008 to July 2010, Mr. Frailey served as the Executive Vice President and General Manager for Electrical Systems and prior thereto served as the Executive Vice President of Business Development from February 2007 to December 2008. Prior to joining us, Mr. Frailey served as Vice President and General Manager for Joint Ventures and Business Strategy at ArvinMeritor’s Emissions Technologies Group from 2003 to early 2007. From 1988 to 2007, Mr. Frailey held several key management positions in engineering, sales and worldwide supplier development at ArvinMeritor. In addition, during that time Mr. Frailey served on the boards of various joint ventures, most notably those of Arvin Sango, Inc. and AD Tech Co., Ltd.

Timo Haatanen has served as President of Global Aftermarket and Structures since August 2013, and prior thereto served as the Managing Director of Europe since joining the company in September 2012. Mr. Haatanen held various executive positions at PACCAR Inc. and FLUKE Corporation prior to joining the company. Mr. Haatanen returned to the United States in 2007 as General Manager, Sales for the Peterbilt Motors Company. Mr. Haatanen was also a non-statutory member of the board of management at DAF Trucks N.V. in the Netherlands and was responsible for Purchasing and Supplier Quality for DAF Trucks and Leyland Trucks in Europe.

Richard P. Lavin has served as director since August 2013 and as President and Chief Executive Officer since May 2013. Prior to joining us in May 2013, Mr. Lavin was the Group President of Construction Industries and Growth Markets at Caterpillar Inc. from December 2007 to December ... 2012. Mr. Lavin served as Vice President of Human Resources for Caterpillar Inc. from 2001 to 2004 and served as its Vice President of

 

18


Table of Contents

Operations for Asia Pacific Division from July 2004 to December 2007. From joining Caterpillar in 1984 to 2001, Mr. Lavin served in a number of key leadership roles, including Product Manager, Director of Corporate Human and Labor Relations, Director of Compensation and Benefits and Attorney. Mr. Lavin has been a Director for USG Corporation since November 2009 and ITT Corporation since May 2013. Mr. Lavin served as a Director of US-China Business Council, the U.S.-India Business Council and the U.S. Korea Business Council. Mr. Lavin also was a member of The Conference Board and the Chicago Council on Global Affairs. Mr. Lavin served on the International Advisory Council of Guanghua School of Management at Peking University and serves on the Board of Trustees at Bradley University.

Patrick Miller has served as President of Global Truck and Bus since August 2013, and prior thereto served as Vice President and General Manager of the Aftermarket division. Mr. Miller also served in roles for CVG as Senior Vice President of Purchasing and Logistics, Vice President of North American Operations, and Vice President and General Manager of the Cab Structures Division. Prior to joining the company in 2005, Mr. Miller held various leadership positions in operations, sales, and product engineering for ArvinMeritor, Alcoa, and Hayes Lemmerz supplying component systems to the light vehicle and heavy duty truck OEMs.

C. Timothy Trenary has served as the Executive Vice President and Chief Financial Officer since October 2013. Mr. Trenary served as Executive Vice President and Chief Financial Officer of ProBuild Holdings LLC, a privately held North American supplier of building materials, from 2010 to 2013. Prior to that, Mr. Trenary served as Senior Vice President & Chief Financial Officer of EMCON Technologies Holdings Limited, a privately held global automotive parts supplier, from 2008 to 2010, and as Vice President and Chief Financial Officer of DURA Automotive Systems, Inc., a publicly held global automotive parts supplier, from 2007 to 2008.

 

Item 1A. Risk Factors

You should carefully consider the risks described below before making an investment decision. These are not the only risks we face.

If any of these certain risks and uncertainties were to actually occur, our business, financial condition or results of operations could be materially adversely affected. In such case, the trading price of our common stock could decline and you may lose all or part of your investment.

 

 

The agreement governing our revolving credit facility and the indenture governing our debt instruments contain covenants that may restrict our current and future operations, particularly our ability to respond to changes in our business or to take certain actions. If we are unable to comply with these covenants, our business, results of operations and liquidity could be materially and adversely affected.

Our revolving credit facility requires us to maintain certain financial ratios. Our revolving credit facility and our other debt instruments require us to comply with various operational and other covenants. If there were an event of default under our debt instruments that was not cured or waived, the holders of the defaulted debt could cause all amounts outstanding with respect to that debt to be due and payable immediately. We cannot assure you that our assets or cash flow would be sufficient to fully repay borrowings under our outstanding debt instruments, either upon maturity or if accelerated, upon an event of default, or that we would be able to refinance or restructure the payments on those debt instruments on acceptable terms.

If we do not comply with the financial and other covenants relating to our revolving credit facility and we are unable to obtain necessary waivers or amendments, we would be precluded from borrowing under the facility, which could have a material adverse effect on our business, financial condition and liquidity. If we are unable to borrow under the facility, we will need to meet our capital requirements using other sources but, alternative sources of liquidity may not be available on acceptable terms. In addition, if we do not comply with the financial and other covenants under the revolving credit facility, the lender could declare an event of default, and our indebtedness under the facility could be declared immediately due and payable, resulting in an event of

 

19


Table of Contents

default under our debt instruments. The lender under our revolving credit facility would also have the right in these circumstances to terminate any commitments it has to provide further borrowings. Any of these events would have a material adverse effect on our business, financial condition and liquidity.

In addition, the agreement governing the revolving credit facility contains covenants that, among other things, restrict our ability to:

 

   

incur liens;

 

   

incur or assume additional debt or guarantees or issue preferred stock;

 

   

pay dividends, or make redemptions and repurchases, with respect to capital stock;

 

   

prepay, or make redemptions and repurchases of, subordinated debt;

 

   

make loans and investments;

 

   

make capital expenditures;

 

   

engage in mergers, acquisitions, asset sales, sale/leaseback transactions and transactions with affiliates;

 

   

place restrictions on the ability of subsidiaries to pay dividends or make other payments to the issuer;

 

   

change the business conducted by us or our subsidiaries; and

 

   

amend the terms of subordinated debt.

 

 

Our substantial amount of indebtedness may adversely affect our cash flow and our ability to operate our business, remain in compliance with debt covenants and make payments on our indebtedness.

The aggregate amount of our outstanding indebtedness was $250.0 million as of December 31, 2013. Our indebtedness, combined with our lease and other financial obligations and contractual commitments could have other important consequences to our stockholders, including:

 

   

make it more difficult for us to satisfy our obligations with respect to our indebtedness, including the revolving credit facility and the other debt instruments, and any failure to comply with the obligations of any of our debt instruments, including financial and other restrictive covenants, could result in an event of default under the revolving credit facility and the indenture governing the debt instruments;

 

   

the possibility that we may be unable to generate cash sufficient to pay, when due, the principal of, interest on or other amounts due in respect of our indebtedness;

 

   

make us more vulnerable to adverse changes in general economic, industry and competitive conditions;

 

   

require us to dedicate a substantial portion of our cash flow from operations to payments on our indebtedness, thereby reducing the availability of our cash flows to fund working capital, capital expenditures, acquisitions and other general corporate purposes;

 

   

limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;

 

   

place us at a competitive disadvantage compared to our competitors that have less debt; and

 

   

limit our ability to borrow additional amounts for working capital, capital expenditures, acquisitions, debt service requirements, or execution of our business strategy or other purposes.

Any of these factors could materially adversely affect our business, financial condition and results of operations.

 

20


Table of Contents
 

We have identified a material weakness in our internal control over financial reporting which could, if not remediated, result in material misstatements in our financial statements.

Our management is responsible for establishing and maintaining adequate internal control over our financial reporting, as defined in Rule 13a-15(f) under the Securities Exchange Act. As disclosed in Item 9A, management identified a material weakness in our internal control over financial reporting relating to system access controls resulting in inadequate segregation of duties. A material weakness is a deficiency or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. As a result of this material weakness, our management concluded that our internal control over financial reporting was not effective based on criteria set forth by the Committee of Sponsoring Organization of the Treadway Commission in Internal Control—An Integrated Framework (1992). We are in the process of developing and implementing our remediation plans to address the material weakness.

If our remedial measures are insufficient to address the material weakness, or if additional material weaknesses or significant deficiencies in our internal control are discovered or occur in the future, our consolidated financial statements may contain material misstatements and we could be required to restate our financial results.

 

 

Volatility and cyclicality in the commercial vehicle market could adversely affect us.

Our profitability depends in part on the varying conditions in the commercial vehicle market. This market is subject to considerable volatility as it moves in response to cycles in the overall business environment and is particularly sensitive to the industrial sector of the economy. Sales of commercial vehicles have historically been cyclical, with demand affected by such economic factors as industrial production, construction levels, demand for consumer durable goods, interest rates and fuel costs.

In addition, tightening of credit in financial markets may adversely affect the ability of our customers to obtain financing for significant truck orders. For example, North American Class 8 production in 2013 decreased approximately 8% over the prior year period. We cannot provide any assurance as to the length or level of the recovery from the recent decline, and any future decline would have an adverse impact on our business and results of operations. Any extended downturn could materially affect our business and results of operations. We also cannot predict the industry will follow past cyclical patterns that might include strong preorders in advance of new emissions standards or declines driven by post-EPA standards or economic conditions. Changes in these patterns may adversely affect our business and results of operations.

 

 

Our results of operations could be significantly adversely affected by a continuing, or any future, downturn in the U.S. and global economy which naturally is accompanied by related declines in infrastructure development and other construction projects.

Our results of operations are directly impacted by changes in the U.S. economy and global economic conditions which are naturally accompanied by related declines in infrastructure development and other construction projects because, among other things:

 

   

Demand for our heavy truck products is generally dependent on the number of new heavy truck commercial vehicles manufactured in North America. Historically, the demand for heavy truck commercial vehicles, and commercial vehicles to haul freight tonnage has significantly declined during periods of weakness in the North American economy.

 

   

Demand for our construction products is also dependent on the overall vehicle demand for new commercial vehicles in the global construction equipment market.

 

   

Demand in the medium/heavy-duty construction equipment market, which is the market in which our products are primarily used, is typically related to the level of larger-scale infrastructure development projects.

 

21


Table of Contents
   

Demand in the light construction equipment market is typically related to certain economic conditions such as the level of housing construction and other smaller-scale developments and projects. If we experience periods of low demand for our products in the future, it could have a negative impact on our revenues, operating results and financial position.

 

 

Economic conditions and disruptions in the credit and financial markets could have an adverse effect on our business, financial condition and results of operations.

Recently, the financial markets experienced a period of unprecedented turmoil, including the bankruptcy, restructuring or sale of certain financial institutions and the intervention of the U.S. federal government. Disruptions in the credit and financial markets may have a material adverse effect on our liquidity and financial condition if our ability to borrow money to finance our operations were to be impaired. A crisis in the financial markets may also have a material adverse impact on the availability and cost of credit in the future. Our ability to pay our indebtedness will depend on our future performance, which will be affected by, among other things, prevailing economic conditions. Tightening of credit in financial markets may also adversely affect the ability of our customers to obtain financing for significant truck orders and the ability of our suppliers to provide us with sufficient raw materials for our products, either of which could adversely affect our business and results of operations.

 

 

Our major OEM customers may exert significant influence over us.

The commercial vehicle component supply industry has traditionally been highly fragmented and serves a limited number of large OEMs. As a result, OEMs have historically had a significant amount of leverage over their outside suppliers. Generally, our contracts with major OEM customers provide for an annual productivity cost reduction. Historically, we have been able to generally mitigate these customer-imposed cost reductions requirements through product design changes, increased productivity and similar programs with our suppliers. However, if we are unable to generate sufficient production cost savings in the future to offset these cost reductions, our gross margin and profitability would be adversely affected. In addition, changes in OEMs’ purchasing policies or payment practices could have an adverse effect on our business.

 

 

Our profitability could be adversely affected if the actual production volumes for our customers’ vehicles are significantly lower than expected.

We incur costs and make capital expenditures based upon estimates of production volumes for our customers’ vehicles. While we attempt to establish a price for our components and systems that will compensate for variances in production volumes, if the actual production of these vehicles is significantly less than anticipated, our gross margin on these products would be adversely affected. We enter into agreements with our customers at the beginning of a given platform’s life to supply products for that platform. Once we enter into such agreements, fulfillment of the supply requirements is our obligation for the entire production life of the platform, with terms ranging from five to seven years, and we have somewhat limited provisions to terminate such contracts. We may become committed to supply products to our customers at selling prices that are not sufficient to cover the direct cost to produce such products. We cannot predict our customers’ demands for our products. If customers representing a significant amount of our revenues were to purchase materially lower volumes than expected, or if we are unable to keep our commitment under the agreements, it would have a material adverse effect on our business, financial condition and results of operations.

 

 

Our customer base is concentrated and the loss of business from a major customer or the discontinuation of particular commercial vehicle platforms could reduce our revenues.

Sales to A.B. Volvo, PACCAR, Daimler Truck and Caterpillar accounted for approximately 16%, 15%, 14% and 8%, respectively, of our revenue in 2013, and our ten largest customers accounted for approximately 74% of our revenue in 2013. Even though we may be selected as the supplier of a product by an OEM for a particular vehicle, our OEM customers issue blanket purchase orders, which generally provide for the supply of

 

22


Table of Contents

that customer’s annual requirements for that vehicle, rather than for a specific number of our products. If the OEM’s requirements are less than estimated, the number of products we sell to that OEM will be accordingly reduced. In addition, the OEM may terminate its purchase orders with us at any time. The loss of any of our largest customers or the loss of significant business from any of these customers could have a material adverse effect on our business, financial condition and results of operations.

 

 

If we are unable to obtain raw materials at favorable prices, it could adversely impact our results of operations and financial condition.

Numerous raw materials are used in the manufacture of our products. Steel, aluminum, petroleum-based products, copper, resin, foam, fabrics, wire and wire components account for the most significant portion of our raw material costs. Although we currently maintain alternative sources for most raw materials, our business is subject to the risk of price increases and periodic delays in delivery. For example, we are being assessed surcharges on certain purchases of steel, copper and other raw materials. If we are unable to purchase certain raw materials required for our operations for a significant period of time, our operations would be disrupted, and our results of operations would be adversely affected. In addition, if we are unable to pass on the increased costs of raw materials to our customers, this could adversely affect our results of operations and financial condition.

 

 

Our inability to compete effectively in the highly competitive commercial vehicle component supply industry could result in lower prices for our products, loss of market share and reduced gross margins, which could have an adverse effect on our revenues and operating results.

The commercial vehicle component supply industry is highly competitive. Some of our competitors are companies that are larger and have greater financial and other resources than we do. In some cases, we compete with divisions of our OEM customers. Our products primarily compete on the basis of price, breadth of product offerings, product quality, technical expertise and development capability, product delivery and product service. Increased competition may lead to price reductions resulting in reduced gross margins and loss of market share.

Current and future competitors may make strategic acquisitions or establish cooperative relationships among themselves or with others, foresee the course of market development more accurately than we do, develop products that are superior to our products, produce similar products at lower cost than we can, or adapt more quickly to new technologies, industry or customer requirements. By doing so, they may enhance their ability to meet the needs of our customers or potential future customers more competitively. These developments could limit our ability to obtain revenues from new customers or maintain existing revenues from our customer base. We may not be able to compete successfully against current and future competitors and the failure to do so may have a material adverse effect on our business, operating results and financial condition.

 

 

We may fail to recuperate our investment in design and development costs incurred for some customers, which could result in lower margins.

In some cases, we may not have clauses in our customer agreements that guarantee that we will recoup the design and development costs that we incurred to develop a product. In other cases, we share the design costs with the customer and thereby have some risk that not all the costs will be covered if the project does not go forward or if it is not as profitable as expected.

 

 

Our inability to successfully achieve operational efficiencies could result in the incurrence of additional costs and expenses that could adversely affect our reported earnings.

As part of our business strategy, we continuously seek ways to lower costs, improve manufacturing efficiencies and increase productivity in our existing operations and intend to apply this strategy to those operations acquired through acquisitions. We may be unsuccessful in achieving these objectives which could adversely affect our operating results and financial condition.

Additionally, aspects of the data upon which the company’s business strategy is based may be incomplete or unreliable, which could lead to errors in the strategy, which in turn could adversely affect the company’s performance. Also, not all business strategy can be based on data, and to the extent that it is based on assumptions and judgments that are untested, then it could be unsound and thereby lead to performance below expectations.

 

23


Table of Contents
 

Equipment failures, delays in deliveries or catastrophic loss at any of our facilities could lead to production or service curtailments or shutdowns.

We manufacture or assemble our products at facilities in North America, Europe, Asia and Australia. An interruption in production or service capabilities at any of these facilities as a result of equipment failure or other reasons could result in our inability to produce our products. In the event of a stoppage in production at any of our facilities, even if only temporary, or if we experience delays as a result of events that are beyond our control, delivery times to our customers could be severely affected. Any significant delay in deliveries to our customers could lead to increased returns or cancellations. Our facilities are also subject to the risk of catastrophic loss due to unanticipated events such as fires, explosions, violent weather conditions or acts of God. We may also experience plant shutdowns or periods of reduced production as a result of equipment failure, delays in deliveries or catastrophic loss, which could have a material adverse effect on our business, results of operations and financial condition.

 

 

We could experience disruption in our supply or delivery chain, which could cause one or more of our customers to halt or delay production.

We, as with other component manufactures in the commercial vehicle industry, ship products to the customers throughout the world so they are delivered on a “Just-in-time” basis in order to maintain low inventory levels. Our suppliers (external suppliers as well as our own production sites) also use a similar method. However, this “Just-in-time” method makes the logistics supply chain in our industry very complex and very vulnerable to disruptions.

The potential loss of one of our suppliers or our own production sites could be caused by a myriad of potential problems, such as closures of one of our own or one of our suppliers’ plants or critical manufacturing lines due to strikes, mechanical breakdowns, electrical outages, fires, explosions, political upheaval, as well as logistical complications due to weather, volcanic eruptions, earthquakes, flooding or other natural disasters, mechanical failures, delayed customs processing and more. Additionally, as we expand in growth markets, the risk for such disruptions is heightened. The lack of even a small single subcomponent necessary to manufacture one of our products, for whatever reason, could force us to cease production, even for a prolonged period. Similarly, a potential quality issue could force us to halt deliveries while we validate the products. Even where products are ready to be shipped or have been shipped, delays may arise before they reach our customer. Our customers may halt or delay their production for the same reason if one of their other suppliers fails to deliver necessary components. This may cause our customers to suspend their orders or instruct us to suspend delivery of our products, which may adversely affect our financial performance.

When we cease timely deliveries, we have to absorb our own costs for identifying and solving the “root cause” problem as well as expeditiously producing replacement components or products. Generally, we must also carry the costs associated with “catching up,” such as overtime and premium freight.

Additionally, if we are the cause for a customer being forced to halt production the customer may seek to recoup all of its losses and expenses from us. These losses and expenses could be very significant and may include consequential losses such as lost profits. Thus, any supply-chain disruption, however small, could potentially cause the complete shutdown of an assembly line of one of our customers, and any such shutdown could expose us to material claims of compensation. Where a customer halts production because of another supplier failing to deliver on time, we may not be fully compensated, if at all, and therefore our business and financial results could be materially adversely affected.

 

 

Volatility in the commercial vehicle market could result from manmade and natural disasters and other global business disruptions.

Volatility in the commercial vehicle market could result from manmade and natural disasters and other global business disruptions. Such catastrophic events may disrupt the commercial vehicle supply chain and materially adversely affect global production levels in our industry. The impact from disasters resulting in wide-spread destruction may not be immediately apparent. It is particularly difficult to assess the impact of

 

24


Table of Contents

catastrophic losses on our suppliers and end customers, who themselves may not fully understand the impact of such events on their businesses. Accordingly, there is no assurance our results of operations will not be materially affected as a result of the impact of future disasters.

 

 

We may be unable to successfully introduce new product and, as a result, our businesses and financial position and results of operations could be materially and adversely affected.

Developing product innovations has been and will continue to be a significant part of our business strategy. We believe it is important we continue to meet our customers’ demands for product innovation, improvement and enhancement, including the continued development of new-generation products, design improvements and innovations that improve the quality and efficiency of our products. However, such development will require us to continue to invest in research and development and sales and marketing. We are also subject to the risks generally associated with product development, including lack of market acceptance, delays in product development and failure of products to operate properly. We may, as a result of these factors, be unable to meaningfully focus on product innovation as a strategy and may therefore be unable to meet our customers’ demands for product innovation, which could have a material adverse effect on our business, operating results and financial condition.

 

 

Our operating results, revenues and expenses may fluctuate significantly from quarter-to-quarter or year-to-year, which could have an adverse effect on the market price of our common stock.

Our operating results, revenues and expenses have in the past varied and may in the future vary significantly from quarter-to-quarter or year-to-year. These fluctuations could have an adverse effect on the market price of our common stock.

Our operating results may fluctuate as a result of these and other events and factors:

 

   

the size, timing, volume and execution of significant orders and shipments;

 

   

changes in the terms of our sales contracts;

 

   

the timing of new product announcements by us and our competitors;

 

   

changes in our pricing policies or those of our competitors;

 

   

market acceptance of new and enhanced products;

 

   

announcement of technological innovations or new products by us or our competitors;

 

   

the length of our sales cycles;

 

   

conditions in the commercial vehicle industry;

 

   

changes in our operating expenses;

 

   

personnel changes;

 

   

new business acquisitions;

 

   

changes in foreign currency exchange rates; and

 

   

seasonal factors.

We base our operating expense budgets primarily on expected revenue trends. Certain of our expenses are relatively fixed and as such we may be unable to adjust expenses quickly enough to offset any unexpected revenue shortfall. Accordingly, any shortfall in revenue may cause significant variation in operating results in any quarter or year.

It is possible that in one or more future quarters or years, our operating results may be below the expectations of public market analysts and investors and may result in changes in analysts’ estimates. In such events, the trading price of our common stock may be adversely affected.

 

25


Table of Contents

In the past, companies that have experienced volatility in the market price of their stock have been the subject of securities class action litigation. If we become involved in securities class action litigation in the future, it could result in substantial costs and diversion of management attention and resources, thus harming our business.

 

 

We are subject to certain risks associated with our foreign operations.

We have operations in Europe, Asia, Australia and Mexico, which accounted in the aggregate for approximately 25%, 21% and 24% of our total revenues for the years ended December 31, 2013, 2012 and 2011, respectively. There are certain risks inherent in our international business activities including, but not limited to:

 

   

the difficulty of enforcing agreements and collecting receivables through certain foreign legal systems;

 

   

foreign customers, who may have longer payment cycles than customers in the U.S.;

 

   

material foreign currency exchange rate fluctuations affecting our ability to match revenue received with costs paid in the same currency;

 

   

tax rates in certain foreign countries, which may exceed those in the U.S. withholding requirements or the imposition of tariffs, exchange controls or other restrictions, including restrictions on repatriation, on foreign earnings;

 

   

intellectual property protection difficulties;

 

   

general economic and political conditions, along with major differences in business culture and practices, including the challenges of dealing with business practices that may impact the company’s compliance efforts, in countries where we operate;

 

   

the difficulties associated with managing a large organization spread throughout various countries; and

 

   

complications in complying with a variety of laws and regulations related to doing business with and in foreign countries, some of which may conflict with U.S. law or may be vague or difficult to comply with.

Additionally, our international business activities are also subject to risks arising from violations of U.S. laws such as the U.S. Foreign Corrupt Practices Act and similar anti-bribery laws in other jurisdictions, and various export control and trade embargo laws and regulations, including those which may require licenses or other authorizations for transactions relating to certain countries and/or with certain individuals identified by the U.S. government. If we fail to comply with applicable laws and regulations, we could suffer civil and criminal penalties that could adversely affect our results of operations and financial condition.

As we continue to expand our business on a global basis, we are increasingly exposed to these risks. Our success will be dependent, in part, on our ability to anticipate and effectively manage these and other risks associated with foreign operations. These and other factors may have a material adverse effect on our international operations, business, financial condition and results of operations.

 

 

We have invested substantial resources in markets where we expect growth and we may be unable to timely alter our strategies should such expectations not be realized.

Our future growth is dependent on our making the right investments at the right time to support product development and manufacturing capacity in areas where we can support our customer base. We have identified the Asia Pacific region, specifically China and India, as key markets likely to experience substantial growth, and accordingly have made and expect to continue to make substantial investments, both directly and through participation in various partnerships and joint ventures, in numerous manufacturing operations, technical centers and other infrastructure to support anticipated growth in those regions. If we are unable to deepen existing and develop additional customer relationships in these regions, we may not only fail to realize expected rates of return on our existing investments, but we may incur losses on such investments and be unable to timely redeploy the invested capital to take advantage of other markets, potentially resulting in lost market share to our competitors. Our results will also suffer if these regions do not grow as quickly as we anticipate.

 

26


Table of Contents
 

Our business in China is subject to aggressive competition and is sensitive to economic and market conditions.

Maintaining a strong position in the Chinese market is a key component of our global growth strategy. The commercial vehicle market in China is highly competitive, with competition from many of the largest global manufacturers and numerous smaller domestic manufacturers. As the size of the Chinese market continues to increase, we anticipate that additional competitors, both international and domestic, will seek to enter the Chinese market and that existing market participants act aggressively to increase their market share. Increased competition may result in price reductions, reduced margins and our inability to gain or hold market share. In addition, our business in China is sensitive to economic and market conditions that drive sales volume in China. If we are unable to maintain our position in the Chinese market or if commercial vehicle sales in China decrease or do not continue to increase, our business and financial results could be materially adversely affected.

 

 

Our products may be rendered less attractive by changes in competitive technologies.

Changes in competitive technologies may render certain of our products less attractive. Our ability to anticipate changes in technology and to successfully develop and introduce new and enhanced products on a timely basis will be a significant factor in our ability to remain competitive. There can be no assurance that we will be able to achieve the technological advances that may be necessary for us to remain competitive. We are also subject to the risks generally associated with new product introductions and applications, including lack of market acceptance, delays in product development and failure of products to operate properly, all of which could adversely affect our business, results of operations and growth potential.

 

 

We may be subject to product liability claims, recalls or warranty claims, which could be expensive, damage our reputation and result in a diversion of management resources.

As a supplier of products and systems to commercial vehicle OEMs, we face an inherent business risk of exposure to product liability claims in the event that our products, or the equipment into which our products are incorporated, malfunction and result in personal injury or death. Product liability claims could result in significant losses as a result of expenses incurred in defending claims or the award of damages.

In addition, we may be required to participate in recalls involving systems or components sold by us if any prove to be defective, or we may voluntarily initiate a recall or make payments related to such claims as a result of various industry or business practices or the need to maintain good customer relationships. Such a recall would result in a diversion of management resources. While we do maintain product liability insurance, we cannot assure you that it will be sufficient to cover all product liability claims, that such claims will not exceed our insurance coverage limits or that such insurance will continue to be available on commercially reasonable terms, if at all. Any product liability claim brought against us could have a material adverse effect on our results of operations.

Moreover, we warrant the workmanship and materials of many of our products under limited warranties and have entered into warranty agreements with certain OEMs that warranty certain of our products in the hands of these OEMs’ customers, in some cases for as long as seven years. Accordingly, we are subject to risk of warranty claims in the event that our products do not conform to our customers’ specifications or, in some cases in the event that our products do not conform to their customers’ expectations. It is possible for warranty claims to result in costly product recalls, significant repair costs and damage to our reputation, all of which would adversely affect our results of operations.

 

 

We have only limited protection for our proprietary rights in our intellectual property, which makes it difficult to prevent third parties from infringing upon our rights.

Our success depends to a certain degree on our ability to protect our intellectual property and to operate without infringing on the proprietary rights of third parties. While we have been issued patents and have registered trademarks with respect to many of our products, our competitors could independently develop similar

 

27


Table of Contents

or superior products or technologies, duplicate our designs, trademarks, processes or other intellectual property or design around any processes or designs on which we have or may obtain patents or trademark protection. In addition, it is possible third parties may have or acquire licenses for other technology or designs that we may use or desire to use, requiring us to acquire licenses to, or to contest the validity of, such patents or trademarks of third parties. Such licenses may not be made available to us on acceptable terms, if at all, or we may not prevail in contesting the validity of third party rights.

In addition to patent and trademark protection, we also protect trade secrets, “know-how” and other confidential information against unauthorized use or disclosure by persons who have access to them, such as our employees and others, through contractual arrangements. These arrangements may not provide meaningful protection for our trade secrets, know-how or other confidential information in the event of any unauthorized use, misappropriation or disclosure. If we are unable to maintain the proprietary nature of our technologies, our revenues could be materially adversely affected.

As we diversify and globalize our geographic footprint, we may encounter laws and practices in emerging markets that are not as stringent or enforceable as those present in developed markets, and thus incur a higher risk of intellectual property infringement, which could adversely affect our results of operations.

 

 

Our products may be susceptible to claims by third parties that our products infringe upon their proprietary rights.

As the number of products in our target markets increases and the functionality of these products further overlaps, we may become increasingly subject to claims by a third party that our technology infringes such party’s proprietary rights. Regardless of their merit, any such claims could be time consuming and expensive to defend, may divert management’s attention and resources, could cause product shipment delays and could require us to enter into costly royalty or licensing agreements. If successful, a claim of infringement against us and our inability to license the infringed or similar technology and/or product could have a material adverse effect on our business, operating results and financial condition.

 

 

We may be unable to complete strategic acquisitions or we may encounter unforeseen difficulties in integrating acquisitions.

We may pursue acquisition targets that will allow us to continue to expand into new geographic markets, add new customers, provide new products, manufacturing and service capabilities and increase penetration with existing customers. However, we expect to face competition for acquisition candidates, which may limit the number of our acquisition opportunities and may lead to higher acquisition prices. Moreover, acquisition of businesses may require additional debt financing, resulting in additional leverage. The covenants relating to our indenture and debt instruments may further limit our ability to complete acquisitions. There can be no assurance we will find attractive acquisition candidates or successfully integrate acquired businesses into our existing business. If the expected synergies from acquisitions do not materialize or we fail to successfully integrate such new businesses into our existing businesses, our results of operations could also be adversely affected.

 

 

We may be unable to successfully implement our business strategy and, as a result, our businesses and financial position and results of operations could be materially and adversely affected.

Our ability to achieve our business and financial objectives is subject to a variety of factors, many of which are beyond our control. For example, we may not be successful in implementing our strategy if unforeseen factors emerge diminishing the expected growth in the commercial vehicle markets we supply, or we experience increased pressure on our margins. In addition, we may not succeed in integrating strategic acquisitions, and our pursuit of additional strategic acquisitions may lead to resource constraints, which could have a negative impact on our ability to meet customers’ demands, thereby adversely affecting our relationships with those customers. As a result of such business or competitive factors, we may decide to alter or discontinue aspects of our business strategy and may adopt alternative or additional strategies. Any failure to successfully implement our business strategy could adversely affect our business, results of operations and growth potential.

 

28


Table of Contents
 

We could incur restructuring and impairment charges as we continue to evaluate our portfolio of assets and identify opportunities to restructure our business in an effort to optimize our cost structure.

As we continue to evaluate our manufacturing footprint in order to improve our cost structure and remove excess, underperforming, or assets that no longer fit our goals, we could incur restructuring charges in order to close facilities, such as, lease termination charges, severance charges and impairment charges of leasehold improvements and/or machinery and equipment.

Also, if we decide to close or consolidate facilities, we may face execution risks which could adversely affect our ability to serve our customers and could lead to loss of business adversely affecting our business, results of operations and financial condition.

 

 

Our earnings may be adversely affected by changes to the carrying values of our tangible and intangible assets as a result of recording any impairment charges deemed necessary.

We are required to perform impairment tests whenever events and circumstances indicate the carrying value may not be recoverable. Significant and unanticipated changes in circumstances, such as the general economic environment, changes or downturns in our industry as a whole, termination of any of our customer contracts, restructuring efforts and general workforce reductions, may result in a charge for impairment that can materially and adversely affect our reported net income and our stockholders’ equity.

We have taken, are taking, and may take future restructuring actions to realign and resize our production capacity and cost structure to meet current and projected operational and market requirements. Charges related to these actions or any further restructuring actions may have a material adverse effect on our results of operations and financial condition. We cannot assure that any current or future restructuring will be completed as planned or achieve the desired results.

Additionally, from time to time in the past, we have recorded asset impairment losses relating to specific plants and operations. Generally, we record asset impairment losses when we determine that our estimates of the future undiscounted cash flows from an operation will not be sufficient to recover the carrying value of that facility’s building, fixed assets and production tooling. For goodwill, we perform a qualitative assessment of whether it is more likely than not that the reporting unit’s fair value is less than its carrying amount. If the fair value of the reporting unit is less than its carrying amount, we compare its implied fair value of goodwill to its carrying amount. If the carrying amount of goodwill exceeds its implied fair value, the reporting unit would recognize an impairment loss for that excess. We cannot assure we will not incur such charges in the future as changes in economic or operating conditions impacting the estimates and assumptions could result in additional impairment.

 

 

Our businesses are subject to statutory environmental and safety regulations in multiple jurisdictions, and the impact of any changes in regulation and/or the violation of any applicable laws and regulations by our businesses could result in a material and adverse effect on our financial condition and results of operations.

We are subject to foreign, federal, state, and local laws and regulations governing the protection of the environment and occupational health and safety, including laws regulating air emissions, wastewater discharges, generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the soil, ground or air; and the health and safety of our colleagues. We are also required to obtain permits from governmental authorities for certain of our operations. We believe we are in material compliance with such environmental and safety laws, and regulations. Certain of our operations generate hazardous substances and wastes. If a release of such substances or wastes occurs at or from our properties, or at or from any offsite disposal location to which substances or wastes from our current or former operations were taken, or if contamination is discovered at any of our current or former properties, we may be held liable for the costs of cleanup and for any other response by governmental authorities or private parties, together with any associated fines, penalties or damages. In most jurisdictions, this liability would arise whether or not we had complied with environmental laws governing the handling of hazardous substances or wastes.

 

29


Table of Contents

Several of our facilities are either certified as, or are in the process of being certified as ISO 9001, 14000, 14001 or TS16949 (the international environmental management standard) compliant or are developing similar environmental management systems. Although we have made, and will continue to make, capital expenditures to implement such environmental programs and comply with environmental requirements, we do not expect to make material capital expenditures for environmental controls in 2014.

The environmental laws to which we are subject have become more stringent over time, and we could incur material costs or expenses in the future to comply with environmental laws. If we violate or fail to comply with these laws and regulations or do not have the requisite permits, we could be fined or otherwise sanctioned by regulators. In some instances, such a fine or sanction could have a material and adverse effect on our financial condition and results of operations.

 

 

We may be adversely affected by the impact of government regulations on our OEM customers.

Although the products we manufacture and supply to commercial vehicle OEMs are not subject to significant government regulation, our business is indirectly impacted by the extensive governmental regulation applicable to commercial vehicle OEMs. These regulations primarily relate to emissions and noise standards imposed by the U.S. Environmental Protection Agency (“EPA”), state regulatory agencies in North America, such as the California Air Resources Board (“CARB”), and other regulatory agencies around the world. Commercial vehicle OEMs are also subject to the National Traffic and Motor Vehicle Safety Act and Federal Motor Vehicle Safety Standards promulgated by the National Highway Traffic Safety Administration in the U.S. Changes in emission standards and other proposed governmental regulations could impact the demand for commercial vehicles and, as a result, indirectly impact our operations. For example, new emission standards governing heavy-duty (Class 8) diesel engines that went into effect in the U.S. on October 1, 2002 and January 1, 2007 resulted in significant purchases of new trucks by fleet operators prior to such dates and reduced short term demand for such trucks in periods immediately following such dates. New emission standards for truck engines used in Class 5 to 8 trucks imposed by the EPA and CARB became effective in 2010. In 2011, the EPA and National Highway Traffic Safety Administration adopted a program to reduce greenhouse gas emissions and improve the fuel efficiency of medium-and heavy-duty vehicles. These standards will phase in with increasing stringency in each model year from 2014 to 2018. To the extent that current or future governmental regulation has a negative impact on the demand for commercial vehicles, our business, financial condition or results of operations could be adversely affected.

 

 

We may be adversely affected by new regulations relating to conflict minerals.

In August 2012, the SEC adopted new disclosures and reporting requirements for companies whose products contain certain minerals and their derivatives, namely tin, tantalum, tungsten or gold, known as conflict minerals. Companies must report annually whether or not such minerals originate from the Democratic Republic of Congo (DRC) and adjoining countries and in some cases to perform extensive due diligence on their supply chains for such minerals. The implementation of these new requirements could adversely affect the sourcing, availability and pricing of materials used in the manufacturing of our products. In addition, we will incur additional costs to comply with the disclosure requirements, including cost related to determining the source of any of the relevant minerals used in our products. Since our supply chain is complex, the due diligence procedures we implement may not enable us to ascertain with sufficient certainty the origins for these minerals or determine that these minerals are DRC conflict free, which may harm our reputation, as well as incur costs associated with an audit. We may also face difficulties in satisfying customers who may require that our products be certified as DRC conflict free, which could harm our relationships with these customers and/or lead to a loss of revenue. These new requirements also could have the effect of limiting the pool of suppliers from which we source these minerals, and we may be unable to obtain conflict-free minerals at prices similar to the past, which could increase our costs and adversely affect our financial condition or results of operations.

 

30


Table of Contents
 

Vertical integration by our customers could materially adversely affect our financial statements.

Demand for our products could be materially reduced if our customers significantly vertically integrate their operations. Our business and results of operations could be adversely affected by vertical integration by our customers.

 

 

We could be adversely affected if transitions in senior management are not successful.

Our operations depend to a large extent on the efforts of our senior management. In May 2013, our Board of Directors appointed Richard Lavin as President and Chief Executive Officer replacing Mervin Dunn upon his retirement. In November 2013, our Board of Directors appointed C. Timothy Trenary as the Chief Financial Officer replacing Chad Utrup who announced his resignation in October 2013. In addition, several other members of senior management have joined the Company since the beginning of 2013.

We seek to develop and retain an effective management team through the proper positioning of existing key employees and the addition of new management personnel where necessary. Our results of operations could be adversely affected if transitions in senior management are not successful or if we are unable to sustain an effective management team.

 

 

If we are unable to recruit or retain skilled personnel, our business, operating results and financial condition could be materially adversely affected.

Retaining labor with the right skills at competitive wages can be difficult in certain markets in which we are doing business, particularly those locations that are seeing much inbound investment and have highly mobile workforces. Conversely, attracting sufficiently well-educated and talented management, especially middle-management employees, in certain markets can be challenging.

Our future success depends on our continuing ability to attract, train, integrate and retain highly skilled personnel, as competition for these employees is intense. We may not be able to retain our current skilled personnel or attract, train, integrate or retain other highly skilled personnel in the future. If we lose the services of our skilled workforce, or if we are unable to attract, train, integrate and retain the highly skilled personnel we need, our business, operating results and financial condition could be materially adversely affected.

 

 

We may be adversely impacted by labor strikes, work stoppages and other matters.

The hourly workforces at our Shadyside, Ohio facility and Mexico operations are unionized. The unionized employees at our North American facilities, with the majority being represented in Mexico, represented approximately 52% of our employees as of December 31, 2013. We have experienced limited unionization efforts at certain of our other North American facilities from time to time. In addition, approximately 63% of our employees of our European, Asian and Australian operations were represented by a shop steward committee, which may seek to limited our flexibility in our relationship with these employees. We may encounter future unionization efforts or other types of conflicts with labor unions or our employees.

Many of our OEM customers and their suppliers also have unionized work forces. Work stoppages or slow-downs experienced by OEMs or their other suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled commercial vehicles. In the event that one or more of our customers or their suppliers experience a material work stoppage, such work stoppage could have a material adverse effect on our business.

 

 

Provisions in our charter documents and Delaware law could discourage potential acquisition proposals, could delay, deter or prevent a change in control and could limit the price certain investors might be willing to pay for our stock.

Certain provisions of our certificate of incorporation and by-laws may inhibit changes in control of our company not approved by our board of directors. These provisions include:

 

   

a classified board of directors with staggered terms;

 

   

a prohibition on stockholder action through written consents;

 

31


Table of Contents
   

a requirement that special meetings of stockholders be called only by the board of directors;

 

   

advance notice requirements for stockholder proposals and director nominations;

 

   

limitations on the ability of stockholders to amend, alter or repeal the by-laws; and

 

   

the authority of the board of directors to issue, without stockholder approval, preferred stock with such terms as the board of directors may determine and additional shares of our common stock.

We are also afforded the protections of Section 203 of the Delaware General Corporation Law, which would prevent us from engaging in a business combination with a person who becomes a 15% or greater stockholder for a period of three years from the date such person acquired such status unless certain board or stockholder approvals were obtained. These provisions could limit the price that certain investors might be willing to pay in the future for shares of our common stock.

 

 

Tax legislation initiatives or challenges to our tax positions could adversely affect our results of operations and financial condition.

We are a multinational corporation with operations in the United States and international jurisdictions. As such, we are subject to the tax laws and regulations of the U.S. federal, state and local governments and many international jurisdictions. From time to time, various legislative initiatives may be proposed that could adversely affect our tax positions. There can be no assurance that our effective tax rate or tax payments will not be adversely affected by these initiatives. In addition, U.S. federal, state and local, as well as international, tax laws and regulations are extremely complex and subject to varying interpretations. There can be no assurance that our tax position will not be challenged by relevant tax authorities or that we would be successful in any such challenge.

 

 

Litigation against us could be costly and time consuming to defend, as a result, our businesses and financial position could be materially and adversely affected.

We are regularly subject to legal proceedings and claims that arise in the ordinary course of business, such as workers’ compensation claims, OSHA investigations, employment disputes, unfair labor practice charges, examination by the Internal Revenue Service, customer and supplier disputes, intellectual property disputes, environmental claims and product liability claims arising out of the conduct of our business. Litigation may result in substantial costs and may divert management’s attention and resources from the operation of our business, which could have a material adverse effect on our business, results of operations or financial condition.

 

 

Security breaches and other disruptions could compromise our information and expose us to liability, which would cause our business and reputation to suffer.

In the ordinary course of our business, we collect and store sensitive data, including intellectual property, our proprietary business information and that of our customers, suppliers and business partners, and personally identifiable information of our customers and employees, in our data centers and on our networks. The secure processing, maintenance and transmission of this information is critical to our operations and business strategy. Despite our security measures, our information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other disruptions. Any such breach could compromise our networks and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information, regulatory penalties, disrupt our operations and the services we provide to customers, damage our reputation, and cause a loss of confidence in our products and services, which could adversely affect our business and our results of operations.

 

Item 1B. Unresolved Staff Comments

None.

 

32


Table of Contents
Item 2. Properties

Our corporate office is located in New Albany, Ohio. Several of our manufacturing facilities are located near our OEM customers to reduce our distribution costs, reduce risk of interruptions in our delivery schedule, further improve customer service and provide our customers with reliable delivery of products and services. The following table provides selected information regarding our principal facilities as of December 31, 2013:

 

Location

  

Primary Product/Function

  

Ownership Interest

Piedmont, Alabama

   Seats & Mirrors    Owned

Douglas, Arizona

   Warehouse    Leased

Dalton, Georgia

   Trim & Warehouse    Leased

Monona, Iowa

   Wire Harness Assembly    Owned

Edgewood, Iowa

   Wire Harness Assembly    Leased

Michigan City, Indiana

   Wipers, Switches    Leased

Wixom, Michigan

   Engineering    Leased

Kings Mountain, North Carolina

   Cab, Sleeper Box, Assembly    Owned

Concord, North Carolina

   Injection Molding    Leased

Norwalk, Ohio

   Idle    Owned / Leased

Shadyside, Ohio

   Stamping of Steel and Aluminum Structural and Exposed Stamped Components    Owned

Chillicothe, Ohio

   Interior Trim & Warehouse    Owned / Leased

New Albany, Ohio

   Corporate Headquarters / R&D    Leased

Tigard, Oregon

   Interior Trim & Warehouse    Leased

Vonore, Tennessee

   Seats, Mirrors & Warehouse    Owned / Leased

Dublin, Virginia

   Interior Trim & Warehouse    Owned / Leased

Agua Prieta, Mexico

   Wire Harness Assembly    Leased

Saltillo, Mexico

   Interior Trim & Seats    Leased

Northampton, United Kingdom

   Seats    Leased

Brisbane, Australia

   Seat Assembly    Leased

Sydney, Australia

   Seat Assembly    Leased

Shanghai, China

   Seats / R&D    Leased

Beijing, China

   Seat Assembly    Leased

Xuzhou, China

   Warehouse    Leased

Brandys nad Orlici, Czech Republic

   Seats    Owned

Liberec, Czech Republic

   Wire Harness Assembly    Leased

Baska (State of Gujarat) India

   Seat Assembly    Leased

Pune (State of Maharashtra), India

   Seat Assembly    Leased

Dharwad (State of Karnataka), India

   Seat Assembly    Leased

L’viv, Ukraine

   Wire Harness Assembly    Leased

We also have leased sales and service offices located in the U.S., Belgium, Australia, Sweden, Czech Republic and France. Our owned domestic facilities are subject to liens securing our obligations under our revolving credit facility and 7.875% senior secured notes due 2019. See Note 8 to our audited consolidated financial statements in Item 8 in this Annual Report on Form 10-K.

 

33


Table of Contents

Utilization of our facilities varies with North American, European, Asian and Australian commercial vehicle production and general economic conditions in such regions. All locations are principally used for manufacturing or assembly, except for our Wixom, Michigan and New Albany, Ohio facilities, which are administrative offices, and our leased warehouse facilities in Douglas, Arizona; Dalton, Georgia; Chillicothe, Ohio; Tigard, Oregon; Vonore, Tennessee; Dublin, Virginia and Xuzhou, China.

 

Item 3. Legal Proceedings

We become involved from time-to-time in litigation incidental to our business, including, but not limited to, customer and supplier disputes, product liability claims, product warranty claims, employment-related claims, environmental claims and examinations by the Internal Revenue Service. Although the ultimate resolution of the these litigation matters is inherently unpredictable and cannot be forecast with certainty, we intend to vigorously defend ourselves and do not currently believe that the outcome of any pending litigation will have a material adverse effect on our financial position, results of operations or cash flows.

 

Item 4. Mine Safety Disclosures

Not applicable.

 

34


Table of Contents

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Our common stock is traded on the NASDAQ Global Select Market under the symbol “CVGI.” The following table sets forth the high and low sale prices for our common stock, for the periods indicated as regularly reported by the NASDAQ Global Select Market:

 

     High      Low  

Year Ended December 31, 2013:

     

Fourth Quarter

   $ 9.95       $ 6.85   

Third Quarter

   $ 8.41       $ 6.85   

Second Quarter

   $ 8.45       $ 6.78   

First Quarter

   $ 9.04       $ 7.31   

Year Ended December 31, 2012:

     

Fourth Quarter

   $ 8.98       $ 6.69   

Third Quarter

   $ 9.75       $ 7.27   

Second Quarter

   $ 12.95       $ 7.83   

First Quarter

   $ 14.00       $ 9.01   

As of March 14, 2014, there were 164 holders of record of our outstanding common stock.

We have not declared or paid any dividends to the holders of our common stock in the past and do not anticipate paying dividends in the foreseeable future. Any future payment of dividends is within the discretion of the Board of Directors and will depend upon, among other factors, the capital requirements, operating results and financial condition of CVG. In addition, our ability to pay cash dividends is limited under the terms of the Second Amended and Restated Loan and Security Agreement (“Second ARLS Agreement”) and the indenture governing the 7.875% notes, as described in more detail under “Management’s Discussion and Analysis — Liquidity and Capital Resources — Debt and Credit Facilities.”

 

35


Table of Contents

The following graph compares the cumulative five-year total return to holders of Commercial Vehicle Group, Inc.’s common stock to the cumulative total returns of the NASDAQ Composite Index and two peer groups: a New Peer Group that includes Meritor Inc., WABCO Holdings, Inc., Titan International Inc., Modine Manufacturing Co., EnPro Industries Inc., Accuride Corporation, Stoneridge Inc., Altra Industrial Motion Corp., L.B. Foster Company, Fuel Systems Technologies Inc., Core Molding Technologies Inc. and Williams Controls Inc. During 2013, Altra Holdings Inc. changed its name to Altra Industrial Motion Corp. Additionally, during 2013, Cascade Corp. and Williams Controls Inc. were acquired in separate transactions. As such, they are no longer included in the peer group. The graph assumes that the value of the investment in the Company’s common stock, in the peer group and the index (including reinvestment of dividends) was $100 on December 31, 2008 and tracks it through December 31, 2013.

 

LOGO

 

*

Based on $100 invested on December 31, 2008 in stock or index, including reinvestment of dividends.

 

      12/31/2008        12/31/2009        12/31/2010        12/31/2011        12/31/2012        12/31/2013    

  Commercial Vehicle Group, Inc.

     100.00           644.09           1,747.31           970.46           881.82           780.85     

  NASDAQ Composite

     100.00           145.34           171.70           170.33           200.34           280.80     

  Old Peer Group

     100.00           153.57           268.99           174.92           215.20           293.06     

  New Peer Group

     100.00           159.30           279.63           176.05           213.95           298.74     

The information in the graph and table above is not “solicitation material,” is not deemed “filed” with the Securities and Exchange Commission and is not to be incorporated by reference in any of our filings under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date of this annual report, except to the extent that we specifically incorporate such information by reference.

 

36


Table of Contents

The following table sets forth information in connection with purchases made by, or on behalf of, us or any affiliated purchaser, of shares of our common stock during the quarterly period ended December 31, 2013:

 

     (a) Total
Number of
Shares (or Units)
Purchased
     (b) Average
Price Paid
per Share
(or Unit)
     (c) Total
Number of
Shares (or
Units)
Purchased as
Part of
Publicly
Announced
Plans or
Programs
     (d) Maximum
Number (or
Approximate
Dollar Value)  of
Shares (or Units)
that May Yet Be
Purchased Under
the Plans or
Programs
 

Month #1

           

(October 1, 2013 through

October 31, 2013)

     99,094       $ 8.50                   

Month #2

           

(November 1, 2013 through

November 31, 2013)

                               

Month #3

           

(December 1, 2013 through

December 31, 2013)

                               

We did not repurchase any of our common stock on the open market as part of a stock repurchase program during the fourth quarter of 2013. However, our employees surrendered 99,094 shares of our common stock in 2013 to satisfy tax withholding obligations on the vesting of restricted stock awards issued under our Fourth Amended and Restated Equity Incentive Plan.

Unregistered Sales of Equity Securities

We did not sell any equity securities during 2013 that were not registered under the Securities Act of 1933, as amended.

 

37


Table of Contents
Item 6. Selected Financial Data

The following table sets forth selected consolidated financial data regarding our business and certain industry information and should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and our consolidated financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K.

Material Events Affecting Financial Statement Comparability:

Our acquisitions of Bostrom Seating (“Bostrom”) and Stratos Seating (“Stratos”) in 2011 materially impacted our results of operations and as a result, our consolidated financial statements for the years ended December 31, 2013, 2012 and 2011 are not comparable to the results of the prior periods presented without consideration of the information provided in Note 4 to our consolidated financial statements contained in Item 8 of our Annual Report on Form 10-K for the year ended December 31, 2011.

 

     Years Ended December 31,  
     2013     2012     2011     2010     2009  
     (Dollars in thousands, except share and per share data)  

Statement of Operations Data:

          

Revenues

   $ 747,718      $ 857,916      $ 832,022      $ 597,779      $ 458,569   

Cost of revenues

     667,989        741,378        716,430        522,982        448,912   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Gross profit

     79,729        116,538        115,592        74,797        9,657   

Selling, general and administrative expenses

     71,711        71,949        65,521        56,111        47,874   

Amortization expense

     1,580        493        346        240        389   

Goodwill and intangible asset impairment

                                 30,135   

Long-lived asset impairment

                                 17,272   

Restructuring costs

                   669        1,730        3,651   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Operating income (loss)

     6,438        44,096        49,056        16,716        (89,664

Other expense (income)

     139        69        353        (4,780     (11,119

Interest expense

     21,087        20,945        19,570        16,834        15,133   

Loss on early extinguishment of debt

                   7,448               1,254   

Expense relating to debt exchange

                                 2,902   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Income (loss) before (benefit) provision for
income taxes

     (14,788     23,082        21,685        4,662        (97,834

(Benefit) provision for income taxes

     (2,337     (26,948     3,095        (1,825     (16,299
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net income (loss)

     (12,451     50,030        18,590        6,487        (81,535
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Less: Non-controlling interest in subsidiary’s loss

     (6     (47     (15              
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net income (loss) attributable to CVG stockholders

   $ (12,445   $ 50,077      $ 18,605      $ 6,487      $ (81,535
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Income (loss) per share attributable to common stockholders:

          

Basic

   $ (0.44   $ 1.77      $ 0.67      $ 0.25      $ (3.74

Diluted

   $ (0.44   $ 1.76      $ 0.66      $ 0.24      $ (3.74

Weighted average common shares outstanding:

          

Basic

     28,230        28,230        27,848        26,247        21,811   

Diluted

     28,428        28,428        28,190        26,994        21,811   

 

38


Table of Contents
     Years Ended December 31,  
     2013     2012     2011     2010     2009  
     (Dollars in thousands, except share and per share data)  

Balance Sheet Data (at end of each period):

          

Working capital (current assets less current liabilities)

   $ 185,159      $ 195,318      $ 193,783      $ 116,077      $ 75,785   

Total assets

     432,441        439,665        406,884        286,207        250,509   

Total liabilities, excluding debt

     122,463        123,357        144,109        121,332        125,630   

Total debt

     250,000        250,000        250,000        164,987        162,644   

Total CVG stockholders’ equity (deficit)

     59,945        66,286        12,766        (112     (37,765

Total non-controlling interest

     33        22        9                 

Total stockholders’ equity (deficit)

     59,978        66,308        12,775        (112     (37,765

Other Data:

          

Net cash provided by (used in):

          

Operating activities

   $ 19,153      $ 24,049      $ 7,794      $ 17,563      $ 18,181   

Investing activities

     (12,949     (42,759     (32,376     (9,955     (7,745

Financing activities

     (937     (1,178     (70,930     24,730        (5,616

Depreciation and amortization

     20,581        14,067        12,576        11,564        16,667   

Capital expenditures, net

     13,666        18,641        22,291        10,645        6,140   

North American Heavy-duty (Class 8) Truck Production (units) 1

     245,000        279,000        255,000        154,000        118,000   

 

(1)

Source: ACT N.A. Commercial Vehicle OUTLOOK (January 2014).

 

39


Table of Contents
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

You should read the following management’s discussion and analysis in conjunction with the information set forth under “Item 6 — Selected Financial Data” and our consolidated financial statements and the notes thereto included in Item 8 in this Annual Report on Form 10-K. The statements in this discussion regarding industry outlook, our expectations regarding our future performance, liquidity and capital resources and other non-historical statements in this discussion are forward-looking statements. See “Forward-Looking Information” on page ii of this Annual Report on Form 10-K. These forward-looking statements are subject to numerous risks and uncertainties, including, but not limited to, the risks and uncertainties described under “Item 1A — Risk Factors.” Our actual results may differ materially from those contained in or implied by any forward-looking statements.

Company Overview

We are a leading supplier of a full range of cab related products and systems for the global commercial vehicle market, including the heavy-duty (Class 8) truck market, the medium/ and heavy-construction vehicle markets, military, bus, automotive and agriculture markets, the specialty transportation markets and recreational markets. Our products include static and suspension seat systems, electronic wire harness assemblies, controls and switches, cab structures and components, interior trim systems (including instrument panels, door panels, headliners, cabinetry and floor systems), interior and exterior finishes and mirrors and wiper systems specifically designed for applications in commercial vehicles.

We are differentiated from automotive industry suppliers by our ability to manufacture low volume customized products on a sequenced basis to meet the requirements of our customers. We believe that we have a leading position in several of our major markets and that we are a leading supplier in the North American commercial vehicle market offering complete cab systems, including cab body assemblies, sleeper boxes, seats, interior trim, flooring, wire harnesses, panel assemblies and other structural components. We believe our products are used by a majority of the North American heavy truck and certain leading global construction OEMs, which we believe creates an opportunity to cross-sell our products and offer a full range of cab related products and systems.

Business Overview

Demand for our heavy truck products is generally dependent on the number of new heavy truck commercial vehicles manufactured in North America, which in turn is a function of general economic conditions, interest rates, changes in governmental regulations, consumer spending, fuel costs, freight costs and our customers’ inventory levels and production rates. New heavy truck commercial vehicle demand has historically been cyclical and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the freight tonnage hauled by commercial vehicles. The North American Class 8 market showed a modest increase in 2012 as production levels increased approximately 9% over 2011. According to a January 2014 report by ACT Research, a publisher of industry market research, North American Class 8 production levels are expected to increase from 248,000 in 2013, peak at 290,000 in 2015, decline to 270,000 in 2017 and increase to 285,000 in 2018. We believe the demand for new Class 8 vehicles will be driven by several factors, including growth in freight volumes and the replacement of aging vehicles. ACT forecasts that the total U.S. freight composite will increase from 12.3 trillion in 2012 to 15.0 trillion in 2017. ACT estimates that the average age of active U.S. Class 8 trucks is 6.6 years in 2012, down slightly from 6.7 years in 2011, which was the highest average vehicle age over the previous 13 years. As vehicles age, their maintenance costs typically increase. ACT forecasts that the vehicle age will decline as aging fleets are replaced.

In 2013, approximately 46% of our revenue was generated from sales to North American heavy-duty truck OEMs. Our remaining revenue in 2013 was primarily derived from sales to OEMs in the global construction equipment market, aftermarket, OE service organizations, military market and other commercial vehicle

 

40


Table of Contents

specialty markets. Demand for our products is driven to a significant degree by preferences of the end-user of the commercial vehicle, particularly with respect to heavy-duty (Class 8) trucks. Unlike the automotive industry, commercial vehicle OEMs generally afford the end-user the ability to specify many of the component parts that will be used to manufacture the commercial vehicle, including a wide variety of cab interior styles and colors, the brand and type of seats, type of seat fabric and color and specific mirror styling. In addition, certain of our products are only utilized in heavy-duty (Class 8) trucks, such as our storage systems, sleeper boxes, sleeper bunks and privacy curtains, and, as a result, changes in demand for heavy-duty (Class 8) trucks or the mix of options on a vehicle can have a greater impact on our business than changes in the overall demand for commercial vehicles. To the extent that demand for higher content vehicles increases or decreases, our revenues and gross profit will be impacted positively or negatively.

Demand for our construction products is dependent on the overall vehicle demand for new commercial vehicles in the global construction equipment market and generally follows certain economic conditions around the world. Our products are primarily used in the medium/heavy construction equipment markets (weighing over 12 metric tons). Demand in the medium/heavy construction equipment market is typically related to the level of larger scale infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development, as well as activity in the mining, forestry and other raw material based industries. OEM demand for our products is directly correlated with new vehicle production. We generally compete for new business at the beginning of the development of a new vehicle platform and upon the redesign of existing programs. New platform development generally begins at least one to three years before the marketing of such models by our customers. Contract durations for commercial vehicle products generally extend for the entire life of the platform, which is typically five to seven years.

Along with the U.S., we have operations in Europe, Asia, Australia and Mexico. Our operating results are, therefore, impacted by exchange rate fluctuations to the extent we translate our foreign operations from their local currencies into U.S. dollars. Changes in these foreign currencies as compared to the U.S. dollar resulted in an approximately $1.7 million decrease in our revenues in 2013 as compared to 2012 and changes to these foreign currencies as compared to the U.S. dollar resulted in an approximately $4.2 million increase in our revenues in 2012 as compared to 2011. Because our costs were generally impacted to the same degree as our revenue, this exchange rate fluctuation did not have a material impact on our net income in 2013 as compared to 2012 and in 2012 as compared to 2011.

During 2013, we conducted an in-depth evaluation of the Company. That evaluation led to the identification of key initiatives intended to enhance the Company’s growth prospects and profitability. As a part of this process, the Company undertook a spans and layers analysis, resulting in a reduction in force; all of which are expected to result in ongoing efficiencies and cost savings. Management anticipates it will reinvest a significant part of those savings to implement a number of the identified initiatives.

During 2014, management plans to incorporate the initiatives it identified during the evaluation process into a comprehensive strategic plan intended to create a performance-based culture that is concentrated on becoming more efficient, more global, better centered on product development and more engaged with customers. The primary goals of the plan are expected to center on delivering increased organic growth, more fully developed sales and marketing efforts and deeper penetration of the Chinese, North American and other world markets.

As we formulate a plan to grow our business globally, we recognize customer expectations in markets outside the U.S. will be different in terms of technology, features and price point. To help drive this effort, we undertook a re-organization and began the implementation of several new market focused initiatives.

We intend to continue examining acquisition candidates that meet our strategic growth criteria including the addition of new customers, diversified global expansion opportunities or technology acquisition and development opportunities. However, we currently anticipate more focus will be placed on our organic growth opportunities and global expansion plans than merger and acquisition activities.

 

41


Table of Contents

Recently Issued Accounting Pronouncements

See Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K for a description of recently issued and/or adopted accounting pronouncements.

Results of Operations

The table below sets forth certain operating data expressed as a percentage of revenues for the periods indicated:

 

     2013     2012     2011  

Revenues

     100.0     100.0     100.0

Cost of revenues

     89.3        86.4        86.1   
  

 

 

   

 

 

   

 

 

 

Gross profit

     10.7        13.6        13.9   

Selling, general and administrative expenses

     9.6        8.4        7.9   

Amortization expense

     0.2        0.1          

Restructuring costs

                   0.1   
  

 

 

   

 

 

   

 

 

 

Operating income

     0.9        5.1        5.9   

Other expense (income)

                     

Interest expense

     2.8        2.4        2.4   

Loss on early extinguishment of debt

                   0.9   
  

 

 

   

 

 

   

 

 

 

Income before (benefit) provision for income taxes

     (1.9     2.7        2.6   

(Benefit) provision for income taxes

     (0.3     (3.0     0.4   
  

 

 

   

 

 

   

 

 

 

Net (loss) income

     (1.6     5.7        2.2   

Less: Non-controlling interest in subsidiary’s loss

                     
  

 

 

   

 

 

   

 

 

 

Net (loss) income attributable to CVG stockholders

     (1.6 )%      5.7     2.2

Year Ended December 31, 2013 Compared to Year Ended December 31, 2012

Revenues.    Revenues decreased $110.2 million, or 12.8%, to $747.7 million for the year ended December 31, 2013 from $857.9 million for the year ended December 31, 2012. This change resulted primarily from:

 

   

a 20% decrease in OEM North American heavy-duty (class 8) truck production and fluctuations in production levels for other North American end markets resulting in approximately $85.0 million decrease in revenues;

 

   

a 23% decrease in Global Construction production revenue driven by customer destocking resulting in approximately $45.7 million decrease in revenues;

 

   

a 43% decrease in Military production driven by a significant decline in US government military defense spending resulting in $11.7 million decrease in revenues;

 

   

a 24% increase in OEM Bus resulting in a $5.0 million increase in revenues; and

 

   

a 59% increase in other markets driven primarily by Automotive, Aftermarket, Office Seating and Specialty production resulting in a $27.4 million increase in revenues.

Cost of Revenues.    Cost of revenues consists primarily of raw materials and purchased components for our products, wages and benefits for our employees and other expenses such as manufacturing supplies, rent and utilities costs related to our operations. Cost of revenues decreased approximately $73.4 million, or 9.9%, to $668.0 million for the year ended December 31, 2013 from $741.4 million for the year ended December 31, 2012. This decrease resulted from a decline in raw material and purchased components costs of $57.9 million, a decrease in wages and benefits costs of $20.1 million associated with a decline in sales volume. This was offset by an increase in overhead costs of $4.6 million due primarily to impairment of machinery and IT equipment.

 

42


Table of Contents

Gross Profit.    Gross profit decreased $36.8 million to $79.5 million for the year ended December 31, 2013 from $116.5 million for the year ended December 31, 2012. As a percentage of revenues, gross profit decreased to 10.7% for the year ended December 31, 2013 from 13.6% for the year ended December 31, 2012. This decrease in gross profit resulted from a decline in sales volume and impairments of machinery and equipment and IT systems totaling $2.7 million recorded in the second half of the current year.

Selling, General and Administrative Expenses.    Selling, general and administrative expenses primarily consists of wages and benefits and other expenses such as marketing, travel, legal, audit, rent and utilities costs which are not directly or indirectly associated with the manufacturing of our products. Selling, general and administrative expenses were consistent at $71.7 million for the year ended December 31, 2013 compared to $71.9 million for the year ended December 31, 2012. Cost savings were achieved primarily via reductions in workforce, bonus and travel totaling $7.3 million; however, these savings were offset by costs incurred to implement strategic initiatives, such as a change in executive leadership, consulting expenses and employee separation costs totaling $7.1 million.

Amortization Expense.    Amortization expense consists of amortization costs for intangible assets including customer receivables and trade names. Amortization expense increased to $1.6 million for the year ended December 31, 2013 from approximately $0.4 million for the year ended December 31, 2012 due to a full year of amortization of intangibles from the VSPL and Finishtek acquisitions made in the fourth quarter of 2012.

Other Expense (Income).    Other expense primarily consists of foreign currency gains and losses. Other expense was consistent at $0.1 million for the years ended December 31, 2013 and 2012.

Interest Expense.    Interest expense increased $0.2 million to $21.1 million for the year ended December 31, 2013 from $20.9 million for the year ended December 31, 2012.

(Benefit) Provision for Income Taxes.    Our benefit for income taxes decreased $24.6 million to a benefit of $2.3 million for the year ended December 31, 2013, compared to an income tax benefit of $26.9 million for the year ended December 31, 2012. This decrease in the current year tax benefit was primarily driven by a non-recurring benefit associated with the release of domestic valuation allowances that resulted in an income tax benefit in 2012 of $26.9 million. -For additional information regarding the deviation from statutory income tax rates, refer to Note 10 of our consolidated financial statements in Item 8 in this Annual Report on
Form 10-K.

Net Income/(Loss).    Net income decreased $62.5 million to a loss of $12.5 million for the year ended December 31, 2013 compared to net income of $50.0 million for the year ended December 31, 2012, as a result of the factors discussed above.

Non-controlling Interest in Subsidiary’s Loss.    Included in net loss is a loss of approximately $6 thousand and $47 thousand, respectively, for the year ended December 31, 2013 and 2012 representing the non-controlling interest of our joint venture in India.

Net Income/(Loss) Attributable to CVG Stockholders.    Net loss attributable to CVG stockholders decreased $62.5 million to $12.4 million for the year ended December 31, 2013 compared to $50.1 million for the year ended December 31, 2012 as a result of the factors discussed above.

Year Ended December 31, 2012 Compared to Year Ended December 31, 2011

Revenues.    Revenues increased $25.9 million, or 3.1%, to $857.9 million for the year ended December 31, 2012 from $832.0 million for the year ended December 31, 2011. This change resulted primarily from:

 

   

a 9% increase in North American heavy-duty (class 8) truck production, fluctuations in production levels for other North American end markets and net new business awards resulting in approximately $41.0 million of increased revenues;

 

43


Table of Contents
   

a decrease in production levels due to lower demand in our European, Australian and Asian markets resulting in approximately $12.4 million of decreased revenues; and

 

   

unfavorable foreign exchange fluctuations from the translation of our foreign operations into U.S. Dollars resulting in a decrease of approximately $4.2 million of revenues.

Cost of Revenues.    Cost of revenues consists primarily of raw materials and purchased components for our products, wages and benefits for our employees and other overhead expenses such as manufacturing supplies, rent and utilities costs related to our operations. Cost of revenues increased approximately $24.9 million, or 3.5%, to $741.4 million for the year ended December 31, 2012 from $716.4 million for the year ended December 31, 2011. This increase was primarily driven by an increase in raw material and purchased components costs of approximately $22.2 million and an increase in other overhead costs of approximately $4.2 million, partially offset by a decrease in wages and benefits costs of approximately $1.5 million.

Gross Profit.    Gross profit increased $0.9 million to $116.5 million for the year ended December 31, 2012 from $115.6 million for the year ended December 31, 2011. As a percentage of revenues, gross profit decreased to 13.6% for the year ended December 31, 2012 from 13.9% for the year ended December 31, 2011. This decrease resulted primarily from higher raw material and purchased components costs.

Selling, General and Administrative Expenses.    Selling, general and administrative expenses primarily consists of wages and benefits and other overhead expenses such as marketing, travel, legal, audit, rent and utilities costs which are not directly or indirectly associated with the manufacturing of our products. Selling, general and administrative expenses increased $6.4 million, or 9.8%, to $71.9 million for the year ended December 31, 2012 from $65.5 million for the year ended December 31, 2011. The increase resulted primarily from increased wages and benefits of approximately $1.1 million and increased marketing, travel and other development expenses of approximately $5.3 million to support new product initiatives and future growth.

Amortization Expense.    Amortization expense increased to approximately $0.4 million for the year ended December 31, 2012 from approximately $0.3 million for the year ended December 31, 2011.

Other Expense (Income).    The $0.1 million and $0.4 million of expense for the year ended December 31, 2012 and 2011, respectively, primarily related to foreign currency exchange losses.

Interest Expense.    Interest expense increased $1.4 million to $20.9 million for the year ended December 31, 2012 from $19.6 million for the year ended December 31, 2011. This increase was primarily the result of higher average outstanding debt obligations resulting from the issuance of our $250.0 million of 7.875% notes.

(Benefit) Provision for Income Taxes.    Our benefit for income taxes increased $30.0 million to a benefit of $26.9 million for the year ended December 31, 2012, compared to an income tax provision of $3.1 million for the year ended December 31, 2011. This overall tax benefit was primarily driven by the release of domestic valuation allowances of $53.5 million that had been established against deferred assets in prior years, offset by current year utilization of domestic deferred tax assets as well as tax expense recorded on the income generated by our non-U.S. locations, which are currently not subject to valuation allowances, such as China and Australia. For additional information regarding the deviation from statutory income tax rates, refer to Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K.

Net Income.    Net income increased $31.4 million to $50.0 million compared to $18.6 million for the year ended December 31, 2011, primarily as a result of the factors discussed above.

Non-controlling Interest in Subsidiary’s Loss.    Included in net income is a loss of approximately $47 thousand and $15 thousand, respectively, for the year ended December 31, 2012 and 2011 representing the non-controlling interest of our joint venture in India.

 

44


Table of Contents

Net Income Attributable to CVG Stockholders.    Net income attributable to CVG stockholders increased $31.5 million to $50.1 million compared to $18.6 million for the year ended December 31, 2011, primarily as a result of the factors discussed above.

Liquidity and Capital Resources

Cash Flows

Our primary sources of liquidity during the year ended December 31, 2013 were cash generated from the sale of our various products to our customers throughout the year. We believe that cash from operations, existing cash reserves, and availability under our revolving credit facility will provide adequate funds for our working capital needs, planned capital expenditures and cash interest payments through 2014. However, no assurance can be given that this will be the case. We did not borrow under our revolving credit facility during 2013.

For the year ended December 31, 2013, cash provided by operations was approximately $19.2 million compared to approximately $24.0 million in the year ended December 31, 2012. This decrease was primarily the result of lower net income, partially offset by reductions in working capital employed as a consequence of the reduction in sales. Cash flow from operations benefited by a reduction in the number of days on hand of inventory at December 31, 2013 compared to December 31, 2012. This improvement is principally a consequence of the decline in North American heavy duty (class 8) build in the last half of 2012 that resulted in higher than normal inventory levels at year end. For the year ended December 31, 2012, cash provided by operations was approximately $24.0 million compared to approximately $7.8 million in the year ended December 31, 2011. This increase was primarily the result of a reduction in accounts receivable, which was partially offset by higher inventory as production volumes increased and lower accounts payable.

Net cash used in investing activities was approximately $12.9 million for the year ended December 31, 2013 compared to approximately $42.8 million for the year ended December 31, 2012 and approximately $32.4 million for the year ended December 31, 2011. The amounts used in the year ended December 31, 2013, included purchases of new equipment and tooling. The amounts used in the year ended December 31, 2012, included approximately $17.3 million related to capital expenditure purchases related to upgrades, replacements or new equipment, machinery and tooling and approximately $24.5 million related to our acquisitions of Vijayjyot (“VSPL”) and Daltek. The amounts used in the year ended December 31, 2011, primarily related to capital expenditure purchases of approximately $21.3 million and our acquisition of Bostrom and Stratos for approximately $11.1 million.

Net cash used in financing activities totaled approximately $0.9 million for the year ended December 31, 2013, compared to net cash used of $1.2 million for the year ended December 31, 2012 and net cash provided of approximately $70.9 million for the year ended December 31, 2011. The net cash used in financing activities for the year ended December 31, 2013 primarily related to the surrender of common stock by employees upon vesting of their restricted stock. The net cash used in financing activities for the year ended December 31, 2012 primarily related to the surrender of common stock by employees upon vesting of their restricted stock. The net cash provided by financing activities for the year ended December 31, 2011 primarily related to the net proceeds from the issuance of our 7.875% notes as part of our debt refinancing.

As of December 31, 2013, cash held by foreign subsidiaries was approximately $19.6 million. If we were to repatriate any portion of these funds back to the U.S., we would accrue and pay the appropriate withholding and income taxes on amounts repatriated. We do not intend to repatriate funds held by our foreign affiliates, but intend to use the cash to fund the growth of our foreign operations.

Debt and Credit Facilities

As of December 31, 2013, our outstanding indebtedness consisted of an aggregate of $250.0 million of 7.875% notes due 2019 (the “7.875% notes”). In addition, we had $2.8 million of outstanding letters of credit

 

45


Table of Contents

under various financing arrangements and an additional $29.7 million of borrowing capacity under our revolving credit facility, which is subject to an availability block.

Revolving Credit Facility

On November 15, 2013, the Company and some of our subsidiaries, as borrowers (collectively, the “borrowers”) entered into a Second ARLS Agreement with Bank of America, N.A. as agent and lender, which amended and restated the Amended and Restated Loan and Security Agreement, dated as of April 26, 2011.

The material terms of the Second ARLS Agreement include the following:

 

   

A facility in the amount of up to $40.0 million with the ability to increase up to an additional $35.0 million under certain conditions;

 

   

Availability is subject to borrowing base limitations and an availability block equal to the amount of debt and foreign cash management services Bank of America, N.A. or its affiliates makes available to the Company’s foreign subsidiaries;

 

   

Availability of up to an aggregate amount of $10.0 million for the issuance of letters of credit, which reduces the total amount available;

 

   

Extension of the maturity date to November 15, 2018;

 

   

Amendments to certain covenants to provide additional flexibility, including (i) conditioning permitted distributions on minimum availability, fixed charge coverage ratio and other requirements, (ii) conditioning permitted foreign investments on minimum availability, fixed charge coverage ratio and other requirements, (iii) conditioning permitted acquisitions on minimum availability, fixed charge coverage ratio and other requirements and (iv) permitting certain sale-leaseback transactions;

 

   

Permitting the repurchase of the Company’s 7.875% notes due 2019 under certain circumstances; and

 

   

Reduction of the fixed charge coverage ratio maintenance requirement to 1.0:1.0 and reduction of the availability threshold for triggering compliance with the fixed charge coverage ratio, as described below.

With the Second ARLS Agreement, the applicable margin is based on average daily availability under the revolving credit facility as follows:

 

Level

   Average Daily
Availability
   Base Rate Loans     LIBOR
Revolver Loans
 

III

   ³ $20,000,000      0.50 %     1.50 %

II

   > $10,000,000 but < $20,000,000      0.75 %     1.75 %

I

   £ $10,000,000      1.00 %     2.00 %

As of December 31, 2013, $4.7 million in deferred fees relating to the revolving credit facility and our 7.875% notes were being amortized over the remaining life of the agreements.

As of December 31, 2013, we did not have borrowings under the revolving credit facility. In addition, as of December 31, 2013, we had outstanding letters of credit of $2.8 million and borrowing availability of $37.2 million under the revolving credit facility.

The borrowers’ obligations under the revolving credit facility are secured by a first-priority lien (subject to certain permitted liens) on substantially all of our tangible and intangible assets, as well as 100% of the capital stock of the direct domestic subsidiaries of each borrower and 65% of the capital stock of each foreign subsidiary directly owned by a borrower. The borrowers are jointly and severally liable for the obligations under the revolving credit facility and unconditionally guarantee the prompt payment and performance thereof.

Until December 31, 2013, the applicable margin was set at Level III. Thereafter, the applicable margin will be subject to increase or decrease by the agent on the first day of the calendar month following each fiscal quarter

 

46


Table of Contents

end. If the agent is unable to calculate average daily availability for a fiscal quarter because of our failure to deliver a borrowing base certificate when required, the applicable margin will be set at Level I until the first day of the calendar month following receipt of a borrowing base certificate.

We pay a commitment fee to the lenders equal to 0.25% per annum of the unused amounts under the revolving credit facility.

Terms, Covenants and Compliance Status

The Second ARLS Agreement requires the maintenance of a minimum fixed charge coverage ratio calculated based upon consolidated EBITDA (as defined in the Second ARLS Agreement) as of the last day of each of the Company’s fiscal quarters. The borrowers are not required to comply with the fixed charge coverage ratio requirement for as long as the borrowers maintain at least $7.5 million of borrowing availability under the revolving credit facility. If borrowing availability is less than $7.5 million at any time, we would be required to comply with a fixed charge coverage ratio of 1.0:1.0 as of the end of any fiscal quarter, and would be required to continue to comply with these requirements until we have borrowing availability of $7.5 million or greater for 60 consecutive days. Because the Company had borrowing availability in excess of $10.0 million from January 1, 2013 through November 15, 2013 and borrowing availability in excess of $7.5 million from November 15, 2013 through December 31, 2013, the Company was not required to comply with the minimum fixed charge coverage ratio covenant during the year ended December 31, 2013.

The Second ARLS Agreement contains other customary restrictive covenants, and customary reporting and other affirmative covenants. See Note 8 to our audited consolidated financial statements in Item 8 in this Annual Report on Form 10-K for information on the covenants. The Company was in compliance with these covenants as of December 31, 2013.

The Second ARLS Agreement contains customary events of default, including, without limitation:

 

   

nonpayment of obligations under the revolving credit facility when due;

 

   

material inaccuracy of representations and warranties;

 

   

violation of covenants in the Second ARLS Agreement and certain other documents executed in connection with it;

 

   

breach or default of agreements related to debt in excess of $5.0 million that could result in acceleration of that debt; revocation or attempted revocation of guarantees;

 

   

denial of the validity or enforceability of the loan documents or failure of the loan documents to be in full force and effect;

 

   

certain judgments in excess of $2.0 million;

 

   

the inability of an obligor to conduct any material part of its business due to governmental intervention, loss of any material license, permit, lease or agreement necessary to the business;

 

   

cessation of an obligor’s business for a material period of time;

 

   

impairment of collateral through condemnation proceedings;

 

   

certain events of bankruptcy or insolvency; certain Employee Retirement Income Securities Act events; and

 

   

a change in control of the Company.

Certain of the defaults are subject to exceptions, materiality qualifiers, grace periods and baskets customary for credit facilities of this type.

Voluntary prepayments of amounts outstanding under the revolving credit facility are permitted at any time, without premium or penalty.

 

47


Table of Contents

The Second ARLS Agreement requires the borrowers to make mandatory prepayments with the proceeds of certain asset dispositions and upon the receipt of insurance or condemnation proceeds to the extent the borrowers do not use the proceeds for the purchase of assets useful in the borrowers’ businesses.

7.875% Senior Secured Notes due 2019

The 7.875% notes were issued pursuant to an indenture, dated as of April 26, 2011 (the “7.875% Notes Indenture”), by and among CVG, certain of our subsidiaries party thereto, as guarantors (the “guarantors”) and U.S. Bank National Association, as trustee. Interest is payable on the 7.875% notes on April 15 and October 15 of each year until their maturity date of April 15, 2019.

The 7.875% notes are senior secured obligations of CVG. Our obligations under the 7.875% notes are guaranteed by the guarantors. The obligations of CVG and the guarantors under the 7.875% notes are secured by a second-priority lien (subject to certain permitted liens) on substantially all of the property and assets of CVG and the guarantors, and a pledge of 100% of the capital stock of CVG’s domestic subsidiaries and 65% of the voting capital stock of each foreign subsidiary directly owned by CVG and the guarantors. The liens, the security interests and all of the obligations of CVG and the guarantors and all provisions regarding remedies in an event of default are subject to an intercreditor agreement among CVG, certain of its subsidiaries, the agent for the revolving credit facility and the collateral agent for the 7.875% notes.

The 7.875% Notes Indenture contains restrictive covenants, including, without limitation, limitations on our ability and the ability of our restricted subsidiaries to: incur additional debt; restrict dividends or other payments of subsidiaries; make investments; engage in transactions with affiliates; create liens on assets; engage in sale/leaseback transactions; and consolidate, merge or transfer all or substantially all of our assets and the assets of our restricted subsidiaries. In addition, subject to certain exceptions, the 7.875% Notes Indenture does not permit us to pay dividends on, redeem or repurchase our capital stock or make other restricted payments unless certain conditions are met, including (i) no default under the 7.875% Notes Indenture has occurred and is continuing, (ii) we and our subsidiaries maintain a consolidated coverage ratio of 2.0 to 1.0 on a pro forma basis and (iii) the aggregate amount of the dividends or payments made under this restriction would not exceed 50% of consolidated net income from October 1, 2010 to the end of the most recent fiscal quarter (or, if consolidated net income for such period is a deficit, minus 100% of such deficit), plus cash proceeds received from certain issuances of capital stock, plus certain other amounts. These covenants are subject to important qualifications and exceptions set forth in the 7.875% Notes Indenture. We were in compliance with these covenants as of December 31, 2013.

The 7.875% Notes Indenture provides for events of default (subject in certain cases to customary grace and cure periods) which include, among others:

 

   

nonpayment of principal or interest when due;

 

   

breach of covenants or other agreements in the 7.875% Notes Indenture;

 

   

defaults in payment of certain other indebtedness;

 

   

certain events of bankruptcy or insolvency; and

 

   

certain defaults with respect to the security interests.

Generally, if an event of default occurs, the trustee or the holders of at least 25% in principal amount of the then outstanding 7.875% notes may declare the principal of and accrued but unpaid interest on all of the 7.875% notes to be due and payable immediately. All provisions regarding remedies in an event of default are subject to the Intercreditor Agreement.

We may redeem the 7.875% notes, in whole or in part, at any time prior to April 15, 2014 at a redemption price equal to 100% of the principal amount, plus accrued and unpaid interest, if any, to the redemption date, plus the “make-whole” premium in the 7.875% Notes Indenture. We evaluated the “make-whole” premium under ASC 815-15 and determined that the premium is not required to be bifurcated from the 7.875% notes and

 

48


Table of Contents

accounted for as a separate derivative instrument. We may redeem the 7.875% notes, in whole or in part, at any time on or after April 15, 2014 at the optional redemption prices set forth in the 7.875% Notes Indenture, plus accrued and unpaid interest, if any, to the redemption date. Not more than once during each twelve-month period ending on April 15, 2012, April 15, 2013 and April 15, 2014, we may redeem up to $25.0 million of the aggregate principal amount of the 7.875% notes at a redemption price equal to 103% of the principal amount, plus accrued and unpaid interest, if any, to the redemption date. In addition, at any time on or prior to April 15, 2014, on one or more occasions, we may redeem up to 35% of the aggregate principal amount of the 7.875% notes with the net proceeds of certain equity offerings, as described in the 7.875% Notes Indenture, at a redemption price equal to 107.875% of the principal amount thereof, plus accrued and unpaid interest, if any, to the redemption date. If we experience certain change of control events, holders of the 7.875% notes may require us to repurchase all or part of their notes at 101% of the principal amount thereof, plus accrued and unpaid interest, if any, to the repurchase date.

Covenants and Liquidity

We continue to operate in a challenging economic environment, and our ability to comply with the covenants in the Second ARLS Agreement may be affected in the future by economic or business conditions beyond our control. Based on our current forecast, we believe that we will be able to maintain compliance with the fixed charge coverage ratio covenant, if applicable, and other covenants in the Second ARLS Agreement for the next twelve months; however, no assurances can be given that we will be able to comply. We base our forecasts on historical experience, industry forecasts and various other assumptions that we believe are reasonable under the circumstances. If actual results are substantially different than our current forecast, or if we do not realize a significant portion of our planned cost savings or sustain sufficient cash or borrowing availability, we could be required to comply with our financial covenants, and there is no assurance that we would be able to comply with such financial covenants. If we do not comply with the financial and other covenants in the Second ARLS Agreement, and we are unable to obtain necessary waivers or amendments from the lender, we would be precluded from borrowing under the Second ARLS Agreement, which could have a material adverse effect on our business, financial condition and liquidity. If we are unable to borrow under the Second ARLS Agreement, we will need to meet our capital requirements using other sources and alternative sources of liquidity may not be available on acceptable terms. In addition, if we do not comply with the financial and other covenants in the Second ARLS Agreement, the lender could declare an event of default under the Second ARLS Agreement, and our indebtedness thereunder could be declared immediately due and payable, which would also result in an event of default under the 7.875% notes. Any of these events would have a material adverse effect on our business, financial condition and liquidity.

We believe that cash on hand, cash flow from operating activities together with available borrowings under the Second ARLS will be sufficient to fund currently anticipated working capital, planned capital spending, certain strategic initiatives and debt service requirements for at least the next 12 months. No assurance can be given, however, that this will be the case.

Contractual Obligations and Commercial Commitments

The following table reflects our contractual obligations as of December 31, 2013:

 

     Payments Due by Period  
     Total      Less than
1 Year
     1-3 Years      3-5 Years  
     (In thousands)  

Long-term debt obligations

   $ 250,000       $       $       $   

Estimated interest payments

     105,602         19,961         39,977         39,922   

Operating lease obligations

     31,139         10,563         9,496         3,777   

Pension and other post-retirement funding

     47,293         3,830         8,043         8,812   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 434,034       $ 34,353       $ 57,515       $ 52,510   
  

 

 

    

 

 

    

 

 

    

 

 

 

 

49


Table of Contents

We have recorded a liability of approximately $0.1 million of unrecognized tax benefits, and we are uncertain as to if or when such amounts may be settled. Related to the unrecognized tax benefits not included in the table above, the Company has also recorded a liability for potential penalties and interest of approximately $0.1 million.

Since December 31, 2013, there have been no material changes outside the ordinary course of business to our contractual obligations as set forth above. Capital lease agreements entered into by us are not material in total.

In addition to the obligations noted above, we have obligations reported as other long-term liabilities that consist primarily of long-term restructuring reserves, long-term performance awards and other items. We also enter into agreements with our customers at the beginning of a given platform’s life to supply products for the entire life of that vehicle platform, which is typically five to seven years. These agreements generally provide for the supply of a customer’s production requirements for a particular platform, rather than for the purchase of a specific quantity of products. Accordingly, our obligations under these agreements are not reflected in the contractual obligations table above.

As of December 31, 2013, we were not party to significant purchase obligations for goods or services.

Off-Balance Sheet Arrangements

We use standby letters of credit to guarantee our performance under various contracts and arrangements, principally in connection with our workers’ compensation liabilities and for leases on equipment and facilities. These letter of credit contracts are usually extended on a year-to-year basis. As of December 31, 2013, we had outstanding letters of credit of $2.8 million. We do not believe that these letters of credit will be required to be drawn.

We currently have no non-consolidated special purpose entity arrangements.

Critical Accounting Policies and Estimates

Our consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”). For a comprehensive discussion of our significant accounting policies, see Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K.

The preparation of our consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. We evaluate our estimates and assumptions on an ongoing basis, particularly relating to accounts receivable reserves, inventory reserves, goodwill, intangible and long-lived assets, income taxes, warranty reserves and pension and other post-retirement benefit plans. We base our estimates on historical experience and various other assumptions that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets, liabilities and equity that are not readily apparent from other sources. Actual results and outcomes could differ materially from these estimates and assumptions. See Item 1A — Risk Factors in this Annual Report on Form 10-K for additional information regarding risk factors that may impact our estimates.

Revenue Recognition — We recognize revenue when (1) delivery has occurred or services have been rendered, (2) persuasive evidence of an arrangement exists, (3) there is a fixed or determinable price and (4) collectability is reasonably assured. Our products are generally shipped from our facilities to our customers, which is when legal title passes to the customer for substantially all of our revenues. We enter into agreements with our customers at the beginning of a given platform’s life to supply products for that platform. Once we enter

 

50


Table of Contents

into such agreements, fulfillment of our purchasing requirements is our obligation for the entire production life of the platform, with terms generally ranging from five to seven years, and we have no provisions to terminate such contracts.

Inventory Reserves — Inventories are valued at the lower of first-in, first-out cost or market. Cost includes applicable material, labor and overhead. We value our finished goods inventory at a standard cost that is periodically adjusted to approximate actual cost. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based primarily on our estimated production requirements driven by expected market volumes. Excess and obsolete provisions may vary by product depending upon future potential use of the product.

Goodwill, Intangible and Long-Lived Assets — Goodwill represents the excess of consideration transferred over the fair value of net assets acquired. We review goodwill for impairment annually, utilizing the one-step qualitative assessment, in the second fiscal quarter and whenever events or changes in circumstances indicate the carrying value may not be recoverable. In conducting the qualitative assessment, we consider relevant events and circumstances that affect the fair value or carrying amount of the reporting unit. Such events and circumstances could include macroeconomic conditions, industry and market considerations, overall financial performance, entity and reporting unit specific events, cost factors and capital markets pricing. We consider the extent to which each of the adverse events and circumstances identified affect the comparison of the reporting unit’s fair value with its carrying amount. We place more weight on the events and circumstances that most affect the reporting unit’s fair value or the carrying amount of its net assets. We consider positive and mitigating events and circumstances that may affect its determination of whether it is more likely than not that the fair value of the reporting unit is less than its carrying amount. These factors are all considered by management in reaching its conclusion about whether to perform the first step of the impairment test.

If the reporting unit’s fair value is determined to be more likely than not impaired based on the one-step qualitative approach, we then perform a quantitative valuation to estimate the fair value of our reporting unit. Implied fair value of goodwill is determined by considering both the income and market approach. Determining the fair value of a reporting unit is judgmental in nature and involves the use of significant estimates and assumptions. These estimates and assumptions include revenue growth rates and operating margins used to calculate projected future cash flows, risk-adjusted discount rates, future economic and market conditions and determination of appropriate market comparables. We base our fair value estimates on assumptions we believe to be reasonable but that are inherently uncertain.

For further information on our goodwill and intangible assets, see Notes 2 and 9 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K.

Income Taxes — We recognize deferred tax assets and liabilities for the expected future tax consequences of events that have been included in our financial statements or tax returns. Deferred tax assets and liabilities are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax laws and rates. In assessing the realizability of deferred tax assets, we consider whether it is more likely than not that some, or a portion, of the deferred tax assets will not be realized. We provide a valuation allowance for deferred tax assets when it is more likely than not that a portion of such deferred tax assets will not be realized. We recognize tax positions initially in the financial statements when it is more likely than not the position will be sustained upon examination by the tax authorities. Such tax positions are initially and subsequently measured as the largest amount of tax benefit that is greater than 50% likely of being realized upon ultimate settlement with the tax authority assuming full knowledge of the position and all relevant facts.

Warranty Reserves — We are subjected to warranty claims for products that fail to perform as expected due to design or manufacturing deficiencies. Customers continue to require their outside suppliers to guarantee or warrant their products and bear the cost of repair or replacement of such products. Depending on the terms under which we supplied products to our customers, a customer may hold us responsible for some or all of the repair or replacement costs of defective products, when the product supplied did not perform as represented. Our policy is

 

51


Table of Contents

to reserve for estimated future customer warranty costs based on historical trends and current economic factors. The amount of such estimates for warranty liability was approximately $4.5 million and $3.2 million at December 31, 2013 and 2012, respectively.

Pension and Other Post-Retirement Benefit Plans — We sponsor pension plans that cover certain hourly and salaried employees in the U.S. and United Kingdom. Our policy is to make annual contributions to the plans to fund the normal cost as required by local regulations. In addition, we have another post-retirement benefit plan for certain U.S. operations, retirees and their dependents.

Our Assumptions

The determination of pension and other post-retirement benefit plan obligations and related expenses requires the use of assumptions to estimate the amount of the benefits that employees earn while working, as well as the present value of those benefits. Our assumptions are determined based on current market conditions, historical information and consultation with and input from third-party actuaries. Due to the significant management judgment involved, our assumptions could have a material impact on the measurement of our pension and other post-retirement benefit expenses and obligations.

Significant assumptions used to measure our annual pension and other post-retirement benefit expenses include:

 

   

discount rate;

 

   

expected return on plan assets; and

 

   

health care cost trend rates.

Discount Rate — The discount rate represents the interest rate that should be used to determine the present value of future cash flows currently expected to be required to settle the pension and other post-retirement benefit obligations. In estimating this rate, we consider rates of return on high quality fixed-income investments included in various published bond indexes. We consider the Citigroup Pension Discount Curve, for U.S. pensions, and the Barclay’s Capital Non-Gilt AA Rated Sterling Bond Index, for non-U.S. pensions, in the determination of the appropriate discount rate assumptions. The weighted average rate we used to measure our pension obligation as of December 31, 2013 was 4.57% for the U.S. and 4.4% for the non-U.S pension plans.

Expected Long-Term Rate of Return — The expected return on pension plan assets is based on our historical experience, our pension plan investment strategy and our expectations for long-term rates of return. Our pension plan investment strategy is reviewed annually and is established based upon plan liabilities, an evaluation of market conditions, tolerance for risk and cash requirements for benefit payments. We use a third-party advisor to assist us in determining our investment allocation and modeling our long-term rate of return assumptions. For 2013 and 2012, we assumed an expected long-term rate of return on plan assets of 7.5% for the U.S. pension plans. For 2013 and 2012, we assumed an expected long-term rate of return on plan assets of 5.8% for the non-U.S. pension plans.

 

52


Table of Contents

Changes in the discount rate and expected long-term rate of return on plan assets within the range indicated below would have had the following impact on 2013 pension and other post-retirement benefits results (in thousands):

 

     1 Percentage
Point Increase
    1 Percentage
Point Decrease
 

(Decrease) increase due to change in assumptions used to determine net periodic benefit costs for the year ended December 31, 2013:

    

Discount rate

   $ (148   $ 130   

Expected long-term rate of return on plan assets

   $ (515   $ 764   

(Decrease) increase due to change in assumptions used to determine benefit obligations for the year ended December 31, 2013:

    

Discount rate

   $ (10,376   $ 12,972   

We believe we are in compliance with the requirements of the Affordable Care Act and do not anticipate any major changes or cost issues in the immediate future. We will continue to evaluate the situation to understand both potential impacts and any opportunities the Act may present. Affordable Care Act changes implemented to date include:

 

   

Expansion of coverage for older children up to age 26

 

   

Elimination of lifetime maximum benefit limits

 

   

Elimination of preexisting condition exclusions for children

 

   

Limited reimbursement under Flexible Spending Accounts for over the counter medications

 

   

Women’s Preventive Care — expansion of preventive services without co-pays or deductibles

 

   

Flex Spending Limits — reduction in annual limit for flex spending accounts from $5,000 to $2,500 Increase in

 

   

Medicare tax by 0.9 percent on wages over $200,000 for single filers, $250,000 for joint filers and $125,000 for those who are married filing separately.

 

   

W-2 Reporting of Benefits — W-2 forms will be required to show the non-taxable cost of employer health care coverage.

Health Care Cost Trend Rates — The health care cost trend rates represent the annual rates of change in the cost of health care benefits based on estimates of health care inflation, changes in health care utilization or delivery patterns, technological advances and changes in the health status of the plan participants. For measurement purposes, a 7.0% and 6.5% annual rate of increase in the per capita cost of covered health care benefits was assumed for 2013 and 2012, respectively. The rate was assumed to decrease gradually to 5.0% through 2018 and remain constant thereafter. Assumed health care cost trend rates can have a significant effect on the amounts reported for other post-retirement benefit plans.

Differences in the ultimate health care cost trend rates within the range indicated below would have had the following impact on 2013 other post-retirement benefit results (in thousands):

 

     1 Percentage
Point Increase
     1 Percentage
Point Decrease
 

Increase (Decrease) from change in health care cost trend rates

     

Other post-retirement benefit expense

   $ 5       $ (5

Other post-retirement benefit liability

   $ 17       $ (16

 

53


Table of Contents
Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Interest Rate Risk

We are exposed to various market risks, including changes in foreign currency exchange rates and interest rates. Market risk is the potential loss arising from adverse changes in market rates and prices, such as foreign currency exchange and interest rates. We do not enter into derivatives or other financial instruments for trading or speculative purposes. We do enter into financial instruments, from time to time, to manage and reduce the impact of changes in foreign currency exchange rates and interest rates and to hedge a portion of future anticipated currency transactions. The counterparties are primarily major financial institutions.

We manage our interest rate risk by balancing the amount of our fixed rate and variable rate debt. For fixed rate debt, interest rate changes affect the fair market value of such debt but do not impact earnings or cash flows. Conversely for variable rate debt, interest rate changes generally do not affect the fair market value of such debt, but do impact future earnings and cash flows, assuming other factors are held constant. None of our debt was variable rate debt at December 31, 2013 and 2012. Holding other variables constant (such as foreign exchange rates and debt levels), a one percentage point change in interest rates would not have a material impact on pre-tax earnings and cash flows.

Foreign Currency Risk

Foreign currency risk is the risk that we will incur economic losses due to adverse changes in foreign currency exchange rates. We use forward exchange contracts to hedge certain of the foreign currency transaction exposures. We estimate our projected revenues and purchases in certain foreign currencies or locations, and will hedge a portion or all of the anticipated long or short position. The contracts typically run from one month up to eighteen months. All existing forward foreign exchange contracts have been marked-to-market and the fair value of contracts recorded in the consolidated balance sheets with the offsetting noncash gain or loss recorded in our consolidated statements of income (loss). We do not hold or issue foreign exchange options or forward contracts for trading purposes.

Outstanding foreign currency forward exchange contracts at December 31, 2013 are more fully described in the notes to our consolidated financial statements in Item 8 of this Annual Report on Form 10-K. The fair value of our contracts at December 31, 2013 amounted to a net asset of $0.2 million, which was included in other current assets in our consolidated balance sheets. The fair value of our contracts at December 31, 2012 amounted to an asset of $0.4 million, which is included in other current assets in our consolidated balance sheets. None of these contracts have been designated as cash flow hedges; thus, the change in fair value at each reporting date is reflected as a noncash charge (income) in our consolidated statement of operations.

Our primary exposures to foreign currency exchange fluctuations are Euro/British pound, Japanese yen/Chinese yuan, Euro/U.S. dollar and Mexican peso/U.S. dollar. At December 31, 2013 and 2012, the potential reduction in earnings from a hypothetical instantaneous 10 percent adverse change in quoted foreign currency spot rates applied to foreign currency sensitive instruments would be immaterial based on the assumption that all of the foreign currencies to which we are exposed would simultaneously decrease by 10 percent.

Foreign Currency Transactions

A portion of our revenues during the year ended December 31, 2013 were derived from manufacturing operations outside of the U.S. The results of operations and the financial position of our operations in these other countries are primarily measured in their respective currency and translated into U.S. dollars. A portion of the expenses generated in these countries is in currencies different from which revenue is generated. As discussed above, from time to time, we enter into forward exchange contracts to mitigate a portion of this currency risk. The reported income of these operations will be higher or lower depending on a weakening or strengthening of the U.S. dollar against the respective foreign currency.

 

54


Table of Contents

A portion of our assets at December 31, 2013 are based in our foreign operations and are translated into U.S. dollars at foreign currency exchange rates in effect as of the end of each period, with the effect of such translation reflected as a separate component of stockholders’ investment. Accordingly, our stockholders’ investment will fluctuate depending upon the weakening or strengthening of the U.S. dollar against the respective foreign currency.

Effects of Inflation

Inflation potentially affects us in two principal ways. First, any borrowings under our revolving credit facility would be tied to prevailing short-term interest rates that may change as a result of inflation rates, translating into changes in interest expense. Second, general inflation can impact material purchases, labor and other costs. In many cases, we have limited ability to pass through inflation-related cost increases due to the competitive nature of the markets that we serve. In the past few years, however, inflation has not been a significant factor.

 

55


Table of Contents
Item 8. Financial Statements and Supplementary Data

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Documents Filed as Part of this Annual Report on Form 10-K

 

     Page  

Reports of Independent Registered Public Accounting Firm

     57   

Consolidated Balance Sheets as of December 31, 2013 and 2012

     59   

Consolidated Statements of Income (Loss) for the years ended December 31, 2013, 2012 and 2011

     60   

Consolidated Statements of Comprehensive Income (Loss) for the years ended December  31, 2013, 2012 and 2011

     61   

Consolidated Statements of Stockholders’ Equity (Deficit) for the years ended December  31, 2013, 2012 and 2011

     62   

Consolidated Statements of Cash Flows for the years ended December 31, 2013, 2012 and 2011

     63   

Notes to Consolidated Financial Statements

     64   

Item 15 — Exhibits and Financial Statement Schedules

     96   

 

56


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders

Commercial Vehicle Group, Inc.:

We have audited the accompanying consolidated balance sheets of Commercial Vehicle Group, Inc. and subsidiaries as of December 31, 2013 and 2012, and the related consolidated statements of income (loss), comprehensive income (loss), stockholders’ equity (deficit), and cash flows for the years then ended. In connection with our audits of the consolidated financial statements, we also have audited financial statement schedule, Schedule II “Valuation and Qualifying Accounts” as of and for the years ended December 31, 2013 and 2012. These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Commercial Vehicle Group, Inc. and subsidiaries as of December 31, 2013 and 2012, and the results of their operations and their cash flows for the years ended December 31, 2013 and 2012, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule as of and for the years ended December 31, 2013 and 2012, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Commercial Vehicle Group, Inc.’s internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control — Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated March 17, 2014 expressed an adverse opinion on the effectiveness of the Company’s internal control over financial reporting.

/s/ KPMG LLP

Columbus, Ohio

March 17, 2014

 

57


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Commercial Vehicle Group, Inc.

We have audited the accompanying consolidated statements of operations, comprehensive income, stockholders’ equity (deficit), and cash flows of Commercial Vehicle Group, Inc. and subsidiaries (the “Company”) for the year ended December 31, 2011. Our audit also included the financial statement schedule listed in Item 15 for the year ended December 31, 2011. These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on the consolidated financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the 2011 consolidated financial statements present fairly, in all material respects, the results of the Company’s operations and their cash flows for the year ended December 31, 2011, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the 2011 financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, present fairly, in all material respects, the information set forth therein.

/s/ Deloitte & Touche LLP

Columbus, Ohio

March 13, 2012

 

58


Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

December 31, 2013 and 2012

 

    2013     2012  
   

(In thousands, except

share and per share

amounts)

 
ASSETS   

CURRENT ASSETS:

   

Cash

  $ 72,695      $ 68,369   

Accounts receivable, net of allowances of $2,302 and $3,393, respectively

    119,069        114,573   

Inventories

    80,133        88,481   

Deferred income taxes

    8,180        8,381   

Other current assets

    7,536        6,446   
 

 

 

   

 

 

 

Total current assets

    287,613        286,250   
 

 

 

   

 

 

 

PROPERTY, PLANT AND EQUIPMENT

   

Land and buildings

    29,701        30,731   

Machinery and equipment

    162,476        157,873   

Construction in progress

    5,109        12,059   

Less accumulated depreciation

    (118,410     (117,359
 

 

 

   

 

 

 

Property, plant and equipment, net

    78,876        83,304   

GOODWILL

    8,220        8,986   

INTANGIBLE ASSETS, net of accumulated amortization of $4,159 and $2,647, respectively

    20,348        23,001   

DEFERRED INCOME TAXES

    24,468        23,615   

OTHER ASSETS

    12,916        14,509   
 

 

 

   

 

 

 

TOTAL ASSETS

  $ 432,441      $ 439,665   
 

 

 

   

 

 

 
LIABILITIES AND STOCKHOLDERS’ EQUITY   

CURRENT LIABILITIES:

   

Accounts payable

  $ 68,280      $ 58,063   

Accrued liabilities and other

    34,285        32,869   
 

 

 

   

 

 

 

Total current liabilities

    102,565        90,932   
 

 

 

   

 

 

 

LONG-TERM DEBT

    250,000        250,000   

PENSION AND OTHER POST-RETIREMENT BENEFITS

    17,249        28,273   

OTHER LONG-TERM LIABILITIES

    2,686        4,152   
 

 

 

   

 

 

 

Total liabilities

    372,500        373,357   
 

 

 

   

 

 

 

COMMITMENTS AND CONTINGENCIES (Note 12)

   

STOCKHOLDERS’ EQUITY:

   

Preferred stock $.01 par value; 5,000,000 shares authorized; no shares issued and outstanding; common stock $.01 par value; 60,000,000 shares authorized; 28,860,143 and 28,463,479 shares issued and outstanding, respectively

    296        290   

Treasury stock purchased from employees; 689,248 and 590,154, respectively

    (6,095     (5,264

Additional paid-in capital

    229,137        223,822   

Retained deficit

    (137,122     (124,677

Accumulated other comprehensive loss

    (26,308     (27,885
 

 

 

   

 

 

 

Total CVG stockholders’ equity

    59,908        66,286   

Non-controlling interest

    33        22   
 

 

 

   

 

 

 

Total stockholders’ equity

    59,941        66,308   
 

 

 

   

 

 

 

TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY

  $ 432,441      $ 439,665   
 

 

 

   

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

59


Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME (LOSS)

Years Ended December 31, 2013, 2012 and 2011

 

     2013     2012     2011  
    

(In thousands, except share and

per share amounts)

 

REVENUES

   $ 747,718      $ 857,916      $ 832,022   

COST OF REVENUES

     667,989        741,378        716,430   
  

 

 

   

 

 

   

 

 

 

Gross Profit

     79,729        116,538        115,592   

SELLING, GENERAL AND ADMINISTRATIVE EXPENSES

     71,711        71,949        65,521   

AMORTIZATION EXPENSE

     1,580        493        346   

RESTRUCTURING COSTS

                   669   
  

 

 

   

 

 

   

 

 

 

Operating Income

     6,438        44,096        49,056   

OTHER EXPENSE

     139        69        353   

INTEREST EXPENSE

     21,087        20,945        19,570   

LOSS ON EARLY EXTINGUISHMENT OF DEBT

                   7,448   
  

 

 

   

 

 

   

 

 

 

(Loss) Income Before (Benefit) Provision for Income Taxes

     (14,788     23,082        21,685   

(BENEFIT) PROVISION FOR INCOME TAXES

     (2,337     (26,948     3,095   
  

 

 

   

 

 

   

 

 

 

NET (LOSS) INCOME

     (12,451     50,030        18,590   
  

 

 

   

 

 

   

 

 

 

Less: Non-controlling interest in subsidiary’s loss

     (6     (47     (15
  

 

 

   

 

 

   

 

 

 

NET (LOSS) INCOME ATTRIBUTABLE TO CVG STOCKHOLDERS

   $ (12,445   $ 50,077      $ 18,605   
  

 

 

   

 

 

   

 

 

 

EARNINGS (LOSS) PER COMMON SHARE:

      

Basic

   $ (0.44   $ 1.77      $ 0.67   
  

 

 

   

 

 

   

 

 

 

Diluted

   $ (0.44   $ 1.76      $ 0.66   
  

 

 

   

 

 

   

 

 

 

WEIGHTED AVERAGE SHARES OUTSTANDING:

      

Basic

     28,584        28,230        27,848   
  

 

 

   

 

 

   

 

 

 

Diluted

     28,584        28,428        28,190   
  

 

 

   

 

 

   

 

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

60


Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

Years Ended December 31, 2013, 2012 and 2011

 

     2013     2012     2011  
     (In thousands)  

Net income (loss)

   $ (12,451   $ 50,030      $ 18,590   
  

 

 

   

 

 

   

 

 

 

Other comprehensive (loss) income:

      

Foreign currency translation adjustments

     (4,338     1,692        (1,416

Minimum pension liability, net of tax

     5,910        (1,721     (6,730
  

 

 

   

 

 

   

 

 

 

Other comprehensive income (loss)

     1,572        (29     (8,146
  

 

 

   

 

 

   

 

 

 

Comprehensive (loss) income

   $ (10,879   $ 50,001      $ 10,444   
  

 

 

   

 

 

   

 

 

 

Less: Comprehensive loss attributed to noncontrolling interests

     (11     (9     (16
  

 

 

   

 

 

   

 

 

 

Comprehensive (loss) income attributable to CVG stockholders

   $ (10,868   $ 50,010      $ 10,460   
  

 

 

   

 

 

   

 

 

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

61


Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (DEFICIT)

Years Ended December 31, 2013, 2012 and 2011

 

    Common Stock     Treasury
Stock
    Additional
Paid-In
Capital
    Retained
Deficit
    Accum.
Other
Comp.
Loss
    Total CVG
Stockholders’
Equity
(Deficit)
    Non-
Controlling
Interest
    Total  
    Shares     Amount                
    (In thousands, except share data)  

BALANCE — December 31, 2010

    27,756,759      $ 280      $ (2,851   $ 215,491      $ (193,359   $ (19,673   $ (112   $      $ (112
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Issuance of restricted stock

    555,832        5                                    5               5   

Surrender of common stock by employees

    (141,662            (1,208                          (1,208            (1,208

Share-based compensation expense

                         3,621                      3,621               3,621   

Total comprehensive income (loss)

                                18,605        (8,145     10,460        (16     10,444   

Non-controlling interests

                                                     25        25   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

BALANCE — December 31, 2011

    28,170,929      $ 285      $ (4,059   $ 219,112      $ (174,754   $ (27,818   $ 12,766      $ 9      $ 12,775   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Issuance of restricted stock

    455,834        5                                    5               5   

Surrender of common stock by employees

    (163,284            (1,205                          (1,205            (1,205

Share-based compensation expense

                         4,710                      4,710               4,710   

Total comprehensive income (loss)

                                50,077        (67     50,010        (9     50,001   

Non-controlling interests

                                                     22        22   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

BALANCE — December 31, 2012

    28,463,479      $ 290      $ (5,264   $ 223,822      $ (124,677   $ (27,885   $ 66,286      $ 22      $ 66,308   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Issuance of restricted stock

    495,758        6                                    6               6   

Surrender of common stock by employees

    (99,094            (831                          (831            (831

Share-based compensation expense

                         5,315                      5,315               5,315   

Total comprehensive income (loss)

                                (12,445     1,577        (10,868     (11     (10,879

Non-controlling interests

                                                     22        22   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

BALANCE — December 31, 2013

    28,860,143      $ 296      $ (6,095   $ 229,137      $ (137,122   $ (26,308   $ 59,908      $ 33      $ 59,941   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

62


Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

Years Ended December 31, 2013, 2012 and 2011

 

     2013     2012     2011  
     (In thousands)  

CASH FLOWS FROM OPERATING ACTIVITIES:

      

Net income (loss)

   $ (12,451   $ 50,030      $ 18,590   
  

 

 

   

 

 

   

 

 

 

Adjustments to reconcile net income (loss) to net cash provided by operating activities:

      

Depreciation and amortization

     20,583        14,067        12,576   

Provision for doubtful accounts

     2,520        2,599        4,324   

Noncash amortization of debt financing costs

     1,132        1,132        1,254   

Loss on early extinguishment of debt

                   7,448   

Amortization of bond discount/premium, net

                   (345

Pension plan contributions

     (3,103     (2,649     (2,860

Shared-based compensation expense

     5,278        4,710        3,621   

Loss on sale of assets

     142        126        326   

Deferred income tax benefit

     (398     (30,762     (1,004

Noncash (gain) loss on forward exchange contracts

     264        (765     347   

Change in other operating items:

      

Accounts receivable

     (6,934     15,126        (39,844

Inventories

     8,553        (6,748     (9,962

Prepaid expenses

     (1,250     1,559        1,295   

Accounts payable and accrued liabilities

     11,457        (25,273     9,824   

Income taxes payable

     (1,683     (1,243     2,002   

Pension obligation

     (1,387     1,613        513   

Other operating activities, net

     (3,569     527        (311
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     19,154        24,049        7,794   
  

 

 

   

 

 

   

 

 

 

CASH FLOWS FROM INVESTING ACTIVITIES:

      

Purchases of property, plant and equipment

     (12,626     (17,323     (21,325

Proceeds from disposal/sale of property, plant and equipment

     322        125        63   

Post-acquisition and acquisition payments, net of cash received

            (24,520     (11,114

Other investing activities, net

     (645     (1,041       
  

 

 

   

 

 

   

 

 

 

Net cash used in investing activities

     (12,949     (42,759     (32,376
  

 

 

   

 

 

   

 

 

 

CASH FLOWS (USED IN) PROVIDED BY FINANCING ACTIVITIES:

      

Proceeds from issuance of common stock under equity incentive plans

     38        5        5   

Surrender of common stock by employees

     (831     (1,205     (1,208

Repayment of long-term debt

                   (170,929

Borrowings of long-term debt

                   250,000   

Debt issuance costs and other

     (144     22        (6,938
  

 

 

   

 

 

   

 

 

 

Net cash (used in) provided by financing activities

     (937     (1,178     70,930   
  

 

 

   

 

 

   

 

 

 

EFFECT OF CURRENCY EXCHANGE RATE CHANGES ON CASH

     (942     302        (984
  

 

 

   

 

 

   

 

 

 

NET INCREASE (DECREASE) IN CASH

     4,326        (19,586     45,364   

CASH:

      

Beginning of period

     68,369        87,955        42,591   
  

 

 

   

 

 

   

 

 

 

End of period

   $ 72,695      $ 68,369      $ 87,955   
  

 

 

   

 

 

   

 

 

 

SUPPLEMENTAL CASH FLOW INFORMATION:

      

Cash paid for interest

   $ 19,958      $ 19,944      $ 20,512   
  

 

 

   

 

 

   

 

 

 

Cash paid for income taxes, net

   $ 2,344      $ 4,566      $ 1,184   
  

 

 

   

 

 

   

 

 

 

Unpaid purchases of property and equipment included in accounts payable

   $ 1,040      $ 1,318      $ 966   
  

 

 

   

 

 

   

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

63


Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Years Ended December 31, 2013, 2012 and 2011

 

1.

Organization

Commercial Vehicle Group, Inc. and its subsidiaries (“CVG” or the “Company”) is a leading supplier of a full range of cab related products and systems for the global commercial vehicle market, including the heavy-duty (Class 8) truck market, the medium—and heavy-construction vehicle markets, military, bus and agriculture markets, the specialty transportation markets and recreational (ATV/UTV) markets. Our products include static and suspension seat systems, electronic wire harness assemblies, controls and switches, cab structures and components, interior trim systems (including instrument panels, door panels, headliners, cabinetry and floor systems), interior and exterior finishes and mirrors and wiper systems specifically designed for applications in commercial vehicles. We have facilities located in the U.S. in Alabama, Arizona, Georgia, Indiana, Illinois, Iowa, Michigan, North Carolina, Ohio, Oregon, Tennessee and Virginia and outside of the U.S. in Australia, China, Czech Republic, India, Mexico, Ukraine and the United Kingdom.

 

2.

Significant Accounting Policies

Principles of Consolidation — The accompanying consolidated financial statements include the accounts of our wholly-owned or controlled subsidiaries. All intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates — The preparation of consolidated financial statements in conformity with U.S. generally accepted accounting principles (“U.S. GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results may differ materially from those estimates. Certain reclassifications have been made to prior year amounts to conform to current year presentation.

Cash — Cash consists of deposits with high credit-quality financial institutions.

Accounts Receivable — Trade accounts receivable are stated at current value less allowances, which approximates fair value. We review our receivables on an ongoing basis to ensure that they are properly valued and collectible. This is accomplished through two contra-receivable accounts — returns and allowances and allowance for doubtful accounts.

Returns and allowances are used to record estimates of returns or other allowances resulting from quality, delivery, discounts or other issues affecting the value of receivables. This account is estimated based on historical trends and current market conditions, with the offset to net sales.

The allowance for doubtful accounts is used to record the estimated risk of loss related to the customers’ inability to pay. This allowance is maintained at a level that we consider appropriate based on factors that affect collectability, such as the financial health of our customers, historical trends of charge-offs and recoveries and current economic market conditions. As we monitor our receivables, we identify customers that may have payment problems, and we adjust the allowance accordingly, with the offset to selling, general and administrative expense. Account balances are charged off against the allowance when recovery is considered remote.

Inventories — Inventories are valued at the lower of first-in, first-out cost or market. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based primarily on our estimated production requirements driven by expected market volumes. Excess and obsolete provisions may vary by product depending upon future potential use of the product.

 

64


Table of Contents

Property, Plant and Equipment — Property, plant and equipment are stated at cost, net of accumulated depreciation. For financial reporting purposes, depreciation is computed using the straight-line method over the following estimated useful lives:

 

Buildings and improvements

     15 to 40 years   

Machinery and equipment

     3 to 20 years   

Tools and dies

     3 to 7 years   

Computer hardware and software

     3 to 5 years   

Expenditures for maintenance and repairs are charged to expense as incurred. Expenditures for major betterments and renewals that extend the useful lives of property, plant and equipment are capitalized and depreciated over the remaining useful lives of the asset. When assets are retired or sold, the cost and related accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized in the results of operations. Leasehold improvements are amortized using the straight-line method over the estimated useful lives of the improvements or the term of the lease, whichever is shorter. Accelerated depreciation methods are used for tax reporting purposes. Depreciation expense for the years ended December 31, 2013 and 2012 was approximately $19.0 million and $13.6 million, respectively.

We review long-lived assets for recoverability whenever events or changes in circumstances indicate that carrying amounts of an asset group may not be recoverable. Our asset groups are established by determining the lowest level of cash flows available. If the estimated undiscounted cash flows are less than the carrying amounts of such assets, we recognize an impairment loss in an amount necessary to write down the assets to fair value as estimated from expected future discounted cash flows. Estimating the fair value of these assets is judgmental in nature and involves the use of significant estimates and assumptions. We base our fair value estimates on assumptions we believe to be reasonable, but that are inherently uncertain.

Goodwill — Goodwill represents the excess of acquisition purchase price over the fair value of net assets acquired. We review goodwill for impairment annually, utilizing the one-step qualitative assessment, in the second fiscal quarter and whenever events or changes in circumstances indicate the carrying value may not be recoverable. In conducting the qualitative assessment, we consider relevant events and circumstances that affect the fair value or carrying amount of the reporting unit. Such events and circumstances could include macroeconomic conditions, industry and market considerations, overall financial performance, entity and reporting unit specific events, cost factors and capital markets pricing. We consider the extent to which each of the adverse events and circumstances identified affect the comparison of the reporting unit’s fair value with its carrying amount. We place more weight on the events and circumstances that most affect the reporting unit’s fair value or the carrying amount of its net assets. We consider positive and mitigating events and circumstances that may affect its determination of whether it is more likely than not that the fair value of the reporting unit is less than its carrying amount. These factors are all considered by management in reaching its conclusion about whether to perform the first step of the impairment test.

If the reporting unit’s fair value is determined to be more likely than not impaired based on the one-step qualitative approach, we then perform a quantitative valuation to estimate the fair value of our reporting unit. Implied fair value of goodwill is determined by considering both the income and market approach. Determining the fair value of a reporting unit is judgmental in nature and involves the use of significant estimates and assumptions. These estimates and assumptions include revenue growth rates and operating margins used to calculate projected future cash flows, risk-adjusted discount rates, future economic and market conditions and determination of appropriate market comparables. We base our fair value estimates on assumptions we believe to be reasonable but that are inherently uncertain.

Intangible Assets — Definite-Lived — We review definite-lived intangible assets for recoverability whenever events or changes in circumstances indicate that carrying amounts may not be recoverable. If the

 

65


Table of Contents

estimated undiscounted cash flows are less than the carrying amount of such assets, we recognize an impairment loss in an amount necessary to write down the assets to fair value as estimated from expected future discounted cash flows. Estimating the fair value of these assets is judgmental in nature and involves the use of significant estimates and assumptions. We base our fair value estimates on assumptions we believe to be reasonable, but that are inherently uncertain. Definite-lived intangible assets are amortized on a straight-line basis over the estimated life of the asset.

See Note 9 for additional information on our goodwill and intangible assets.

Revenue Recognition — We recognize revenue when 1) delivery has occurred or services have been rendered, 2) persuasive evidence of an arrangement exists, 3) there is a fixed or determinable price, and 4) collectability is reasonably assured. Our products are generally shipped from our facilities to our customers, which is when title passes to the customer for substantially all of our revenues.

Warranty — We are subject to warranty claims for products that fail to perform as expected due to design or manufacturing deficiencies. Customers continue to require their outside suppliers to guarantee or warrant their products and bear the cost of repair or replacement of such products. Depending on the terms under which we supply products to our customers, a customer may hold us responsible for some or all of the repair or replacement costs of defective products, when the product supplied did not perform as represented. Our policy is to record provisions for estimated future customer warranty costs based on historical trends and current economic factors. These amounts, as they relate to the years ended December 31, 2013 and 2012 are included within accrued expenses in the accompanying consolidated balance sheets. The following presents a summary of the warranty provision for the years ended December 31 (in thousands):

 

     2013     2012  

Balance — Beginning of the year

   $ 3,239      $ 2,777   

Provisions for new warranties issued

     5,084        2,614   

Changes in provision for preexisting warranties

     107        113   

Deduction for payments made

     (3,914     (2,286

Currency translation adjustment

     13        21   
  

 

 

   

 

 

 

Balance — End of year

   $ 4,529      $ 3,239   
  

 

 

   

 

 

 

Research and Development Costs — Research and development costs are expensed as incurred and included in selling, general and administration expenses. Research and development costs charged to expense for the years ended December 31, 2013 and 2012 were approximately $6.0 million and $6.4 million, respectively.

Income Taxes — We recognize deferred tax assets and liabilities for the expected future tax consequences of events that have been included in our financial statements or tax returns. Deferred tax assets and liabilities are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax laws and rates. In assessing the realizability of deferred tax assets, we consider whether it is more likely than not that some, or a portion, of the deferred tax assets will not be realized. We provide a valuation allowance for deferred tax assets when it is more likely than not that a portion of such deferred tax assets will not be realized. We recognize tax positions initially in the financial statements when it is more likely than not the position will be sustained upon examination by the tax authorities. Such tax positions are initially and subsequently measured as the largest amount of tax benefit that is greater than 50% likely of being realized upon ultimate settlement with the tax authority assuming full knowledge of the position and all relevant facts.

Comprehensive (Loss) Income — Comprehensive (loss) income reflects the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources. Comprehensive (loss) income represents net loss adjusted for foreign currency translation adjustments and minimum pension liability adjustments. We disclose comprehensive loss in the consolidated statements of comprehensive (loss) income. See footnote 16 for a rollforward of activity in comprehensive loss.

 

66


Table of Contents

Fair Value of Financial Instruments — The fair value framework requires the categorization of assets and liabilities into three levels based upon the assumptions (inputs) used to price the assets or liabilities. Level 1 provides the most reliable measure of fair value, whereas Level 3 generally requires significant management judgment. The three levels are defined as follows:

Level 1 — Unadjusted quoted prices in active markets for identical assets and liabilities.

Level 2 — Observable inputs other than those included in Level 1. For example, quoted prices for similar assets or liabilities in active markets or quoted prices for identical assets or liabilities in inactive markets.

Level 3 — Significant unobservable inputs reflecting management’s own assumptions about the inputs used in pricing the asset or liability.

Concentrations of Credit Risk — Financial instruments that potentially subject us to concentrations of credit risk consist primarily of cash and accounts receivable. We sell products to various companies throughout the world in the ordinary course of business. We routinely assess the financial strength of our customers and maintain allowances for anticipated losses. Customers that accounted for a significant portion of consolidated revenues for each of the three years ended December 31 were as follows:

 

     2013     2012     2011  

A.B. Volvo

     16     15     14

PACCAR

     16        19        18   

Daimler Trucks

     14        15        13   

Caterpillar

     7        10        11   

Navistar

     7        7        9   

Deere & Co.

     5        5        4   

As of December 31, 2013 and 2012, net receivables from these customers represented approximately 60% and 58% of total receivables, respectively.

Foreign Currency Translation — Our functional currency is the local currency. Accordingly, all assets and liabilities of our foreign subsidiaries are translated using exchange rates in effect at the end of the period and revenue and costs are translated using average exchange rates for the period. The related translation adjustments are reported in accumulated other comprehensive loss in stockholders’ equity. Translation gains and losses arising from transactions denominated in a currency other than the functional currency of the entity involved are included in the results of operations.

Foreign Currency Forward Exchange Contracts — We use forward exchange contracts to hedge certain of the foreign currency transaction exposures. We estimate our projected revenues and purchases in certain foreign currencies or locations, and hedge a portion or all of the anticipated long or short position. The contracts typically run from one month up to eighteen months. All forward foreign exchange contracts have been marked-to-market and the fair value of contracts recorded in the consolidated balance sheets with the offsetting non-cash gain or loss recorded in our consolidated statements of income (loss). We do not hold or issue foreign exchange options or forward contracts for trading purposes.

Recently Issued Accounting Pronouncements — In July 2012, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2012-02, “Intangibles — Goodwill and Other.” The ASU gives companies the option to first perform a qualitative assessment to determine whether it is more likely than not that an indefinite-lived intangible asset is impaired. If a company determines that it is more likely than not that the fair value of such an asset exceeds its carrying amount, it would not need to calculate the fair value of the asset in that year. However, if a company concludes otherwise, it must calculate the fair value of the asset, compare that value with its carrying amount and record an impairment charge, if any. The Company adopted this guidance in fiscal 2013.

 

67


Table of Contents

In February 2013, the FASB issued ASU No. 2013-02, Comprehensive Income (Topic 220): Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income. ASU 2013-02 requires an entity to provide information about the amounts reclassified out of accumulated other comprehensive income by component. In addition, an entity is required to present, either on the face of the statement where net income is presented or in the notes, significant amounts reclassified out of accumulated comprehensive income by the respective line items of net income but only if the amount reclassified is required under U.S. GAAP to be reclassified to net income in its entirety in the same reporting period. For other amounts that are not required under U.S. GAAP to be reclassified in their entirety to net income, an entity is required to cross-reference to other disclosures required under U.S. GAAP that provide additional detail about those amounts. ASU 2013-02 does not change the requirements for reporting net income or other comprehensive income in financial statements. The new standard is effective for reporting periods beginning after December 15, 2013. The Company will implement the provisions of ASU 2013-02 as of January 1, 2014.

In July 2013, the FASB issued ASU 2013-11, Income Taxes (Topic 740): Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists. ASU 2013-11 requires an unrecognized tax benefit, or a portion of an unrecognized tax benefit, to be presented in the financial statements as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax loss, or a tax credit carryforward. ASU 2013-11 is effective for fiscal years, and interim periods within those years, beginning after December 15, 2013. The new standard is to be applied prospectively but retrospective application is permitted. The Company has previously implemented the provisions of ASU 2013-11 which are reflected in the years ended December 31, 2013, 2012 & 2010.

 

3.

Fair Value Measurement

At December 31, 2013, our financial instruments consist of cash, accounts receivable, accounts payable, accrued liabilities and our revolving credit facility. The carrying value of these instruments approximates fair value as a result of the short duration of such instruments or due to the variability of the interest cost associated with such instruments. The fair values of our derivative assets and liabilities measured on a recurring basis as of December 31 are categorized as follows (in thousands):

 

     2013      2012  
     Total      Level 1      Level 2      Level 3      Total      Level 1      Level 2      Level 3  

Derivative assets 1

   $ 259       $       $ 259       $       $ 419       $       $ 419       $   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Derivative liabilities 1

   $ 105       $       $ 105       $       $ 1       $       $ 1       $   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

(1)

Based on observable market transactions of spot and forward rates.

Our derivative assets and liabilities represent foreign exchange contracts that are measured at fair value using observable market inputs such as forward rates, interest rates, our own credit risk and our counterparties’ credit risks. Based on these inputs, the derivative assets and liabilities are classified as Level 2.

The following table summarizes the notional amount of our open foreign exchange contracts at December 31 (in thousands):

 

     2013      2012  
     U.S. $
Equivalent
     U.S.
Equivalent
Fair Value
     U.S. $
Equivalent
     U.S.
Equivalent
Fair Value
 

Commitments to buy currencies:

           

Mexican peso

   $ 11,157       $ 11,311       $ 10,066       $ 10,484   
  

 

 

    

 

 

    

 

 

    

 

 

 

We consider the impact of our credit risk on the fair value of the contracts, as well as the ability to execute obligations under the contract.

 

68


Table of Contents

The following table summarizes the fair value and presentation in the consolidated balance sheets for derivatives not designated as accounting hedges at December 31 (in thousands):

 

     Asset Derivatives  
     2013      2012  
     Balance Sheet
Location
   Fair Value      Balance Sheet
Location
   Fair Value  

Foreign exchange contracts

  

Other current assets

   $ 259      

Other current assets

   $ 419   
     

 

 

       

 

 

 
     Liability Derivatives  
     2013      2012  
     Balance Sheet
Location
   Fair Value      Balance Sheet
Location
   Fair Value  

Foreign exchange contracts

  

Accrued liabilities

   $ 105      

Accrued liabilities

   $ 1   
     

 

 

       

 

 

 

The following table summarizes the effect of derivative instruments on the consolidated statements of income (loss) for derivatives not designated as accounting hedges at December 31 (in thousands):

 

              2013             2012      
     Location of (Loss) Gain
Recognized in Income on
Derivatives
   Amount of (Loss) Gain
Recognized in Income  on
Derivatives
 

Foreign exchange contracts

  

Cost of Revenues

   $ (264   $ 765   

The carrying amounts and fair values of our long-term debt at December 31 are as follows (in thousands):

 

     2013      2012  
     Carrying
Amount
     Fair Value      Carrying
Amount
     Fair Value  

Long-term debt

   $ 250,000       $ 250,000       $ 250,000       $ 248,750   

The following methods were used to estimate the fair value of each class of financial instruments:

Long-term debt.    The fair value of long-term debt obligations is based on quoted market prices or on rates available on debt with similar terms and maturities.

There were no material fair value measurements of our long-lived assets and definite-lived intangible assets measured on a non-recurring basis as of December 31, 2013 or 2012.

 

4.

Business Combinations

On November 5, 2012, we acquired all of the seat assembly assets related to VSPL for cash consideration of approximately $14.0 million and contingent consideration estimated at $1.7 million. No additional contingent consideration was paid on the first anniversary of closing as the results did not exceed the EBITDA threshold. The additional contingent consideration estimated to be paid based on the second anniversary of the closing date is $1.1 million. Total purchase price shall not exceed approximately $16.2 million. VSPL supplies seats primarily for the passenger, school and coach bus markets in India. VSPL has three leased facilities, one each in the Baska (State of Gujarat), Pune (State of Maharashtra) and Dharwad (State of Karnataka) regions of India. The acquisition of VSPL is consistent with our intent to grow and expand into the India commercial vehicle market and complements our existing initiatives in the construction and truck markets of India.

On December 28, 2012, we acquired all of the assets related to Daltek, LLC (“Daltek”) for total consideration of approximately $13.2 million (the “Daltek acquisition”). The consideration consisted of $10.6 million cash paid upon closing, with $2.5 million deferred until 18 months following closing. Daltek is a

 

69


Table of Contents

company specializing in the application of customized industrial hydrographic films, paints and other interior and exterior finishes. Daltek has two leased facilities in Dalton, Georgia. The acquisition of Daltek complements our existing exterior and interior trim products and is consistent with our plan to grow and diversify outside of the Class 8 market. Pro forma results for our 2012 acquisitions would not be materially different than as reported.

In 2011, we entered into a joint venture (the “Joint Venture”) with Hema Engineering Industries Limited (“Hema”) for the production of seats and seating components for the India commercial vehicle market and for the supply of seats and components to our other global locations. At the date of the Joint Venture, we held a 90% ownership and Hema held a 10% ownership in the Joint Venture, which we deemed a voting interest entity. In connection with the VSPL acquisition, our ownership interest increased to approximately 99% and Hema holds approximately 0.26 percent ownership in the Joint Venture. Hema has the option to increase its ownership interest in the Joint Venture to 10% within 18 months from November 12, 2012. As a result, we consolidate the Joint Venture in our consolidated financial statements according to the voting model.

On January 28, 2011, we acquired all of the assets and certain liabilities related to Bostrom Seating, Inc. (“Bostrom”) for cash consideration of approximately $8.8 million (the “Bostrom acquisition”). Bostrom is a seat supplier to the North American heavy truck, aftermarket, bus and specialty vehicle markets. Bostrom has one owned manufacturing facility in Piedmont, Alabama. The acquisition of Bostrom further expands our North American presence in certain key end markets and enhances our overall aftermarket position.

On July 27, 2011, we acquired certain assets of Stratos Seating (“Stratos”) for cash consideration of approximately $2.3 million (the “Stratos acquisition”). Stratos is a seat supplier to the Australian military, truck and specialty vehicle markets. Stratos is located in Wetherill Park, Sydney, Australia. The acquisition of Stratos expands our Australian presence in the military and truck markets and enhances our overall product offering with the addition of the unique Stratos suspension system and military seating products.

 

5.

Inventories

Inventories consisted of the following as of December 31 (in thousands):

 

     2013      2012  

Raw materials

   $ 52,455       $ 57,355   

Work in process

     11,895         13,659   

Finished goods

     15,783         17,467   
  

 

 

    

 

 

 
   $ 80,133       $ 88,481   
  

 

 

    

 

 

 

 

6.

Accrued and Other Liabilities

Accrued and other liabilities consisted of the following as of December 31 (in thousands):

 

     2013      2012  

Compensation and benefits

   $ 14,654       $ 17,428   

Interest

     4,255         4,274   

Warranty costs

     4,529         3,239   

Deferred revenue

     2,100         145   

Legal and professional fees

     1,704         1,240   

Contingent consideration

     1,132           

Accrued freight

     1,085         874   

Taxes payable

     316         1,750   

Other

     4,510         3,919   
  

 

 

    

 

 

 
   $ 34,285       $ 32,869   
  

 

 

    

 

 

 

 

70


Table of Contents
7.

Debt

Debt consisted of the following at December 31 (in thousands):

 

     2013      2012  

7.875% senior secured notes due April 15, 2019

   $ 250,000       $ 250,000   

Revolving Credit Facility

On November 15, 2013, the Company and certain of the Company’s subsidiaries, as borrowers (together with the Company, the “borrowers”) entered into a Second ARLS Agreement (as so amended and restated, the “Second ARLS Agreement”) with Bank of America, N.A. as agent and lender, which amended and restated the Amended and Restated Loan and Security Agreement, dated as of April 26, 2011, by and among the Company, the borrowers and Bank of America, N.A., as agent and lender, as amended, governing the Company’s revolving credit facility.

Among other things, the Second ARLS Agreement extended the maturity of the revolving credit facility to November 15, 2018 and amended the applicable margin, as described below. The Second ARLS Agreement included amendments to certain covenants to provide additional flexibility, including amendments to (i) eliminate the aggregate cap on permitted distributions and instead condition such distributions on minimum availability, fixed charge coverage ratio and other requirements, (ii) eliminate the aggregate cap on permitted foreign investments and instead condition such foreign investments on minimum availability, fixed charge coverage ratio and other requirements, (iii) eliminate the aggregate cap on purchase consideration for permitted acquisitions and instead condition such acquisitions on minimum availability, fixed charge coverage ratio and other requirements and (iv) permitting certain sale-leaseback transactions. In addition, the covenant restricting payment of certain debt was amended to permit repurchases of the Company’s 7.875% senior secured notes due 2019 if certain conditions are met. The Second ARLS Agreement also amended the financial covenant to reduce the fixed charge coverage ratio maintenance requirement to 1.0:1.0 and reduced the availability threshold for triggering compliance with the fixed charge coverage ratio, as described below.

The size of the revolving credit facility was unchanged by the Second ARLS Agreement and remains at $40 million, but the borrowers may request an increase in revolver commitments from time to time in an aggregate amount of up to $35 million, as long as the requested increase does not breach any subordinated debt agreement of the borrowers or the indenture governing the Company’s 7.875% senior secured notes due 2019. Availability under the revolving credit facility is subject to borrowing base limitations and an availability block equal to the amount of debt and foreign cash management servicesBank of America, N.A. or its affiliates makes available to the Company’s foreign subsidiaries. Up to an aggregate of $10.0 million is available to the borrowers for the issuance of letters of credit, which reduces availability under the revolving credit facility.

As a result of the Second ARLS Agreement, the applicable margin is based on average daily availability under the revolving credit facility as follows:

 

Level

  

Average Daily

Availability

   Base Rate Loans     LIBOR
Revolver Loans
 

III

   ³ $20,000,000      0.50 %     1.50 %

II

   > $10,000,000 but < $20,000,000      0.75 %     1.75 %

I

   £ $10,000,000      1.00 %     2.00 %

Until December 31, 2013, the applicable margin was set at Level III. Thereafter, the applicable margin will be subject to increase or decrease by the agent on the first day of the calendar month following each fiscal quarter end. If the agent is unable to calculate average daily availability for a fiscal quarter due to borrower’s failure to

 

71


Table of Contents

deliver a borrowing base certificate when required, the applicable margin will be set at Level I until the first day of the calendar month following receipt of a borrowing base certificate.

The Company pays a commitment fee to the lenders equal to 0.25% per annum of the unused amounts under the revolving credit facility. As of December 31, 2013, approximately $4.7 million in deferred fees relating to the revolving credit facility and our 7.875% notes were being amortized over the remaining life of the agreements.

As of December 31, 2013, we did not have borrowings under the revolving credit facility. In addition, as of December 31, 2013, we had outstanding letters of credit of approximately $2.8 million and borrowing availability of $37.2 million under the revolving credit facility.

The borrowers’ obligations under the revolving credit facility are secured by a first-priority lien (subject to certain permitted liens) on substantially all of the tangible and intangible assets of the borrowers, as well as 100% of the capital stock of the direct domestic subsidiaries of each borrower and 65% of the capital stock of each foreign subsidiary directly owned by a borrower. Each of CVG and each other borrower is jointly and severally liable for the obligations under the revolving credit facility and unconditionally guarantees the prompt payment and performance thereof.

Terms, Covenants and Compliance Status

The Second ARLS Agreement requires the maintenance of a minimum fixed charge coverage ratio calculated based upon consolidated EBITDA (as defined in the revolving credit facility) as of the last day of each of the Company’s fiscal quarters. The borrowers are not required to comply with the fixed charge coverage ratio requirement for as long as the borrowers maintain at least $7.5 million of borrowing availability under the revolving credit facility. If borrowing availability is less than $7.5 million at any time, the borrowers would be required to comply with a fixed charge coverage ratio of 1.0:1.0 as of the end of any fiscal quarter, and would be required to continue to comply with these requirements until the borrowers have borrowing availability of $7.5 million or greater for 60 consecutive days. Because the Company had borrowing availability in excess of $10.0 million from January 1, 2013 through November 15, 2013 and borrowing availability in excess of $7.5 million from November 15, 2013 through December 31, 2013, the Company was not required to comply with the minimum fixed charge coverage ratio covenant during the year ended December 31, 2013.

The Second ARLS Agreement contains customary restrictive covenants, including, without limitation, limitations on the ability of the borrowers and their subsidiaries to incur additional debt and guarantees; grant liens on assets; pay dividends or make other distributions; make investments or acquisitions; dispose of assets; make payments on certain indebtedness; merge, combine with any other person or liquidate; amend organizational documents; file consolidated tax returns with entities other than other borrowers or their subsidiaries; make material changes in accounting treatment or reporting practices; enter into restrictive agreements; enter into hedging agreements; engage in transactions with affiliates; enter into certain employee benefit plans; amend subordinated debt or the indenture governing the 7.875% senior secured notes due 2019; and other matters customarily restricted in loan agreements. The Second ARLS Agreement also contains customary reporting and other affirmative covenants. The Company was in compliance with these covenants as of December 31, 2013.

The Second ARLS Agreement contains customary events of default, including, without limitation, nonpayment of obligations under the revolving credit facility when due; material inaccuracy of representations and warranties; violation of covenants in the Second ARLS Agreement and certain other documents executed in connection therewith; breach or default of agreements related to debt in excess of $5.0 million that could result in acceleration of that debt; revocation or attempted revocation of guarantees; denial of the validity or enforceability of the loan documents or failure of the loan documents to be in full force and effect; certain judgments in excess of $2.0 million; the inability of an obligor to conduct any material part of its business due to governmental

 

72


Table of Contents

intervention, loss of any material license, permit, lease or agreement necessary to the business; cessation of an obligor’s business for a material period of time; impairment of collateral through condemnation proceedings; certain events of bankruptcy or insolvency; certain Employee Retirement Income Securities Act events; and a change in control of the Company. Certain of the defaults are subject to exceptions, materiality qualifiers, grace periods and baskets customary for credit facilities of this type.

Voluntary prepayments of amounts outstanding under the revolving credit facility are permitted at any time, without premium or penalty.

The Second ARLS Agreement requires the borrowers to make mandatory prepayments with the proceeds of certain asset dispositions and upon the receipt of insurance or condemnation proceeds to the extent the borrowers do not use the proceeds for the purchase of assets useful in the borrowers’ businesses.

7.875% Senior Secured Notes due 2019

The 7.875% notes were issued pursuant to an indenture, dated as of April 26, 2011 (the “7.875% Notes Indenture”), by and among CVG, certain of our subsidiaries party thereto, as guarantors (the “guarantors”), and U.S. Bank National Association, as trustee. Interest is payable on the 7.875% notes on April 15 and October 15 of each year until their maturity date of April 15, 2019.

The 7.875% notes are senior secured obligations of CVG. Our obligations under the 7.875% notes are guaranteed by the guarantors. The obligations of CVG and the guarantors under the 7.875% notes are secured by a second-priority lien (subject to certain permitted liens) on substantially all of the property and assets of CVG and the guarantors, and a pledge of 100% of the capital stock of CVG’s domestic subsidiaries and 65% of the voting capital stock of each foreign subsidiary directly owned by CVG and the guarantors. The liens, the security interests and all of the obligations of CVG and the guarantors and all provisions regarding remedies in an event of default are subject to an intercreditor agreement among CVG, certain of its subsidiaries, the agent for the revolving credit facility and the collateral agent for the 7.875% notes.

The 7.875% Notes Indenture contains restrictive covenants and events of default (subject to certain customary grace periods). We were in compliance with these covenants and were not in default as of December 31, 2013. We may redeem the 7.875% notes, in whole or in part, at any time prior to April 15, 2014 at a redemption price equal to 100% of the principal amount thereof, plus accrued and unpaid interest, if any, to the redemption date, plus the “make-whole” premium set forth in the 7.875% Notes Indenture. We evaluated the “make-whole” premium under ASC 815-15 and determined that the premium is not required to be bifurcated from the 7.875% notes and accounted for as a separate derivative instrument. We may redeem the 7.875% notes, in whole or in part, at any time on or after April 15, 2014 at the optional redemption prices set forth in the 7.875% Notes Indenture, plus accrued and unpaid interest, if any, to the redemption date. Not more than once during each twelve-month period ending on April 15, 2012, April 15, 2013 and April 15, 2014, we may redeem up to $25.0 million of the aggregate principal amount of the 7.875% notes at a redemption price equal to 103% of the principal amount thereof, plus accrued and unpaid interest, if any, to the redemption date. In addition, at any time on or prior to April 15, 2014, on one or more occasions, we may redeem up to 35% of the aggregate principal amount of the 7.875% notes with the net proceeds of certain equity offerings, as described in the 7.875% Notes Indenture, at a redemption price equal to 107.875% of the principal amount thereof, plus accrued and unpaid interest, if any, to the redemption date. If we experience certain change of control events, holders of the 7.875% notes may require us to repurchase all or part of their notes at 101% of the principal amount thereof, plus accrued and unpaid interest, if any, to the repurchase date.

 

73


Table of Contents
8.

Goodwill and Intangible Assets

Our intangible assets as of December 31 were comprised of the following (in thousands):

 

     December 31, 2013  
     Weighted-
Average
Amortization
Period
     Gross
Carrying
Amount
     Accumulated
Amortization
    Net
Carrying
Amount
 

Definite-lived intangible assets:

          

Trademarks/Tradenames

     23 years       $ 9,680       $ (3,090   $ 6,590   

Customer relationships

     15 years         14,828         (1,069     13,759   
     

 

 

    

 

 

   

 

 

 
      $ 24,508       $ (4,159   $ 20,349   
     

 

 

    

 

 

   

 

 

 

 

     December 31, 2012  
     Weighted-
Average
Amortization
Period
     Gross
Carrying
Amount
     Accumulated
Amortization
    Net
Carrying
Amount
 

Definite-lived intangible assets:

          

Trademarks/Tradenames

     23 years       $ 9,911       $ (2,556   $ 7,355   

Customer relationships

     15 years         15,737         (91     15,646   
     

 

 

    

 

 

   

 

 

 
      $ 25,648       $ (2,647   $ 23,001   
     

 

 

    

 

 

   

 

 

 

The aggregate intangible asset amortization expense was approximately $1.5 million, $0.5 million and $0.3 million for the fiscal years ended December 31, 2013, 2012 and 2011, respectively.

The estimated intangible asset amortization expense for the five succeeding fiscal years ending after December 31, 2013, is as follows (in thousands):

 

2014

   $ 1,505   

2015

   $ 1,350   

2016

   $ 1,350   

2017

   $ 1,350   

2018

   $ 1,350   

The changes in the carrying amounts of goodwill for the years ended December 31 are as follows (in thousands):

 

     2013     2012  

Balance — Beginning of the year

   $ 8,986      $   

Additional acquisitions recorded

            9,093   

Currency translation adjustment

     (766     (107
  

 

 

   

 

 

 

Balance — End of the year

   $ 8,220      $ 8,986   
  

 

 

   

 

 

 

 

74


Table of Contents
9.

Income Taxes

Pre-tax income (loss) consisted of the following for the years ended December 31 (in thousands):

 

     2013     2012      2011  

Domestic

   $ (20,863   $ 13,315       $ 12,135   

Foreign

     6,075        9,767         9,550   
  

 

 

   

 

 

    

 

 

 

Total

   $ (14,788   $ 23,082       $ 21,685   
  

 

 

   

 

 

    

 

 

 

A reconciliation of income taxes computed at the statutory rates to the reported income tax (benefit) provision for the years ended December 31 is as follows (in thousands):

 

     2013     2012     2011  

Federal provision at statutory rate

   $ (5,176   $ 8,079      $ 7,590   

U.S./foreign tax rate differential

     (809     665        555   

Foreign non-deductible expenses

     1,174        1,557          

Foreign tax provision

     114        83        582   

State taxes, net of federal benefit

     1,009        1,194        37   

Change in uncertain tax positions

     (253     (359     184   

Change in valuation allowance

     856        (43,804     (3,951

Tax credits

     (326     (37     (259

Share-based compensation

     636        539        325   

Reduction of prior year’s tax attributes

            255        (1,424

Permanent goodwill

                   (412

Entity reclassification gain

            4,167          

Other

     438        713        (132
  

 

 

   

 

 

   

 

 

 

(Benefit) provision for income taxes

   $ (2,337   $ (26,948   $ 3,095   
  

 

 

   

 

 

   

 

 

 

The (benefit) provision for income taxes for the years ended December 31 is as follows (in thousands):

 

    2013     2012     2011  
    Current
Provision
    Deferred
Provision
    Total
Provision
    Current
Provision
    Deferred
Provision
    Total
Provision
    Current
Provision
    Deferred
Provision
    Total
Provision
 

Federal

  $ (2,689   $ (1,837   $ (4,526   $ (6,295   $ (31,676   $ (37,971   $ (240   $ (817   $ (1,057

State and local

    17        994        1,011        854        1,023        1,877        857        (533     324   

Foreign

    731        447        1,178        9,281        (135     9,146        3,482        346        3,828   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total

  $ (1,941   $ (396   $ (2,337   $ 3,840      $ (30,788   $ (26,948   $ 4,099      $ (1,004   $ 3,095   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

75


Table of Contents

A summary of deferred income tax assets and liabilities as of December 31 is as follows (in thousands):

 

     2013     2012  

Current deferred tax assets (liabilities):

    

Accounts receivable

   $ 202      $ 306   

Inventories

     3,265        3,318   

Warranty costs

     2,302        1,874   

Foreign exchange contracts

     (58     (157

Accrued benefits

     1,993        1,945   

Other accruals not currently deductible for tax purposes

     1,044        1,453   
  

 

 

   

 

 

 
     8,748        8,739   
  

 

 

   

 

 

 

Valuation allowance

     (568     (532
  

 

 

   

 

 

 

Net current deferred tax assets

   $ 8,180      $ 8,207   
  

 

 

   

 

 

 

Noncurrent deferred tax (liabilities) assets:

    

Amortization and fixed assets

   $ 8,516      $ 13,620   

Pension obligation

     4,913        8,828   

Net operating loss carryforwards

     27,613        18,365   

Tax credit carryforwards

     1,823        1,631   

Stock options

     410        608   

Other temporary differences not currently available for tax purposes

     (2,617     (2,478
  

 

 

   

 

 

 
     40,658        40,574   
  

 

 

   

 

 

 

Valuation allowance

     (16,621     (16,960
  

 

 

   

 

 

 

Net noncurrent deferred tax assets

   $ 24,037      $ 23,614   
  

 

 

   

 

 

 

Total deferred tax asset

   $ 32,217      $ 31,821   
  

 

 

   

 

 

 

As of December 31, 2013, we had total deferred assets of $60.9 million, which was offset by $17.2 million of valuation allowances. Our total deferred tax liabilities were $11.5 million. Our overall deferred tax position was a net deferred tax asset of $32.2 million.

As a result of certain realization requirements, the table of deferred tax assets and liabilities shown above does not include certain deferred tax assets at December 31, 2013, that arose directly from tax deductions related to equity compensation in excess of compensation recognized for financial reporting. Equity will be increased by $2.1 million if and when such deferred tax assets are ultimately realized. We use tax law ordering for purposes of determining when excess tax benefits have been realized.

We assess whether valuation allowances should be established against deferred tax assets based on consideration of all available evidence, both positive and negative, using a “more likely than not” standard. This assessment considers, among other matters, the nature, frequency and severity of recent losses, forecasts of future profitability, the duration of statutory carryforward periods, our experience with tax attributes expiring unused and tax planning alternatives. In making such judgments, significant weight is given to evidence that can be objectively verified.

During 2012, we generated sufficient earnings to support a three-year cumulative history of domestic pre-tax book earnings. When combined with the review of other positive and negative evidence, we determined that it was appropriate to release the entire $53.5 million of valuation allowances associated with all federal and state deferred tax assets existing at December 31, 2011. We continued to carry a valuation allowance of $17.5 million related to net deferred assets in international jurisdictions that have a multiple year cumulative loss at December 31, 2012. As of December 31, 2013, we determined that a valuation allowance of $17.2 million was

 

76


Table of Contents

needed against certain foreign deferred tax assets. This amount represents our total net deferred assets in international jurisdictions that have a multiple year cumulative loss. In the event that our actual results differ from our estimates or we adjust these estimates in future periods, the effects of these adjustments could materially impact our financial position and results of operations. As of December 31, 2013 and 2012, our net deferred tax asset position in our financials was $32.2 million and $31.8 million, respectively.

As of December 31, 2013, we had $59.8 million of foreign, $25.9 million of federal and $80.0 million of state net operating loss carryforwards available to offset future taxable income. Utilization of these losses is subject to the tax laws of the applicable tax jurisdiction and may be limited by the ability of certain subsidiaries to generate taxable income in the associated tax jurisdiction. Our net operating loss carryforwards expire beginning in 2014 and continue through 2033, except for certain tax jurisdictions with no expiration dates.

As of December 31, 2013, we had $1.3 million of research and development tax credits being carried forward related to our U.S. operations. Utilization of these credits may be limited by the ability to generate federal taxable income in future years and will expire beginning in 2027 and continue through 2033. We also had $0.5 million of alternative minimum tax credit carryforward that do not expire.

As of December 31, 2013, undistributed earnings from our foreign affiliates were $37.7 million. We do not intend to repatriate these funds and consider these funds to be permanently reinvested in accordance with ASC 740-30. Deferred taxes have not been provided on these unremitted earnings as determination of the liability is not practical because the liability would be dependent on circumstances existing if and when remittance occurs.

As of December 31, 2013 cash of $19.6 million was held by foreign subsidiaries. If we were to repatriate any portion of these funds back to the U.S., we would need to accrue and pay the appropriate withholding and income taxes on amounts repatriated. We do not intend to repatriate funds held by our foreign affiliates, but intend to use the cash to fund the growth of our foreign operations.

We operate in multiple jurisdictions and are routinely under audit by federal, state and international tax authorities. Exposures exist related to various filing positions which may require an extended period of time to resolve and may result in income tax adjustments by the taxing authorities. Reserves for these potential exposures have been established which represent management’s best estimate of the probable adjustments. On a quarterly basis, management evaluates the reserve amounts in light of any additional information and adjusts the reserve balances as necessary to reflect the best estimate of the probable outcomes. However, actual results may differ from these estimates. The resolution of these matters in a particular future period could have an impact on our consolidated statement of operations and provision for income taxes.

We file federal income tax returns in the U.S. and income tax returns in various states and foreign jurisdictions. With few exceptions, we are no longer subject to income tax examinations by any of the taxing authorities for years before 2008. We currently have no tax examinations in process.

As of December 31, 2013 and 2012, we provided a liability of $0.2 million and $0.4 million, respectively, of unrecognized tax benefits related to various federal and state income tax positions, all of which would impact our effective tax rate, if recognized.

We accrue interest and penalties related to unrecognized tax benefits through income tax expense. We had $0.1 million and $0.2 million accrued for the payment of interest and penalties at December 31, 2013 and December 31, 2012, respectively. Accrued interest and penalties are included in the $0.2 million of unrecognized tax benefits.

Approximately $0.2 million of unrecognized tax reserves, interest and penalties will be released within the next 12 months due to the statute of limitations.

 

77


Table of Contents

A reconciliation of the beginning and ending amount of unrecognized tax benefits (including interest and penalties) at December 31 is as follows (in thousands):

 

     2013     2012     2011  

Balance — Beginning of the year

   $ 444      $ 851      $ 666   

Gross increase — tax positions in prior periods

            162        235   

Gross decreases — tax positions in prior periods

     (257     (523     (48

Gross increases — current period tax positions

     2        20          

Lapse of statute of limitations

            (66     (2
  

 

 

   

 

 

   

 

 

 

Balance — End of the year

   $ 189      $ 444      $ 851   
  

 

 

   

 

 

   

 

 

 

 

10.

Segment Reporting and Geographic Locations

Operating segments are defined as components of an enterprise that are evaluated regularly by the company’s chief operating decision maker. Due to the manner in which our chief operating decision maker regularly assesses performance and decides how to allocate resources, we have a single operating segment.

The following table presents revenues and long-lived assets for each of the geographic areas in which we operate (in thousands):

 

     Years Ended December 31,  
     2013      2012      2011  
     Revenues      Long-lived
Assets
     Revenues      Long-lived
Assets
     Revenues      Long-lived
Assets
 

United States

   $ 557,389       $ 63,404       $ 674,106       $ 67,821       $ 611,240       $ 69,438   

United Kingdom

     50,281         2,329         57,623         2,890         71,389         3,353   

All other countries

     140,048         13,143         126,187         12,593         149,393         3,881   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 
   $ 747,718       $ 78,876       $ 857,916       $ 83,304       $ 832,022       $ 76,672   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Revenues are attributed to geographic locations based on the location of where the product is sold. Included in all other countries are intercompany sales eliminations.

The following is a summary composition by product category of our revenues (dollars in thousands):

 

    Years Ended December 31,  
    2013     2012     2011  
    Revenues     %     Revenues     %     Revenues     %  

Seats and seating systems

  $ 314,440        42      $ 362,631        42      $ 357,994        43   

Electronic wire harnesses and panel assemblies

    152,947        21        175,051        21        179,595        22   

Trim systems and components

    150,605        20        170,110        20        156,849        19   

Cab structures, sleeper boxes, body panels and structural components

    74,219        10        86,701        10        83,692        10   

Mirrors, wipers and controls

    55,507        7        63,423        7        53,892        6   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 
  $ 747,718        100      $ 857,916        100      $ 832,022        100   
 

 

 

     

 

 

     

 

 

   

 

11.

Commitments and Contingencies

Leases — We lease office, warehouse and manufacturing space and certain equipment under non-cancelable operating lease agreements that require us to pay maintenance, insurance, taxes and other expenses in addition to annual rentals. The anticipated future lease costs are based in part on certain assumptions and we will continue to monitor these costs to determine if the estimates need to be revised in the future. Lease expense was

 

78


Table of Contents

approximately $16.8 million, $15.0 million and $16.0 million in 2013, 2012 and 2011, respectively. Capital lease agreements entered into by us are immaterial in total. Future minimum annual rental commitments at December 31, 2013 under these operating leases are as follows (in thousands):

 

Year Ending December 31,

      

2014

     10,563   

2015

     5,954   

2016

     3,542   

2017

     2,313   

2018

     1,463   

Thereafter

     7,304   

Guarantees — We accrue for costs associated with guarantees when it is probable that a liability has been incurred and the amount can be reasonably estimated. The most likely cost to be incurred is accrued based on an evaluation of currently available facts, and where no amount within a range of estimates is more likely, the minimum is accrued. We record a liability for the fair value of such guarantees in the balance sheet. As of December 31, 2013, we had no such guarantees.

Litigation — We are subject to various legal actions and claims incidental to our business, including those arising out of alleged defects, product warranties and employment-related and environmental matters. Management believes that we maintain adequate insurance to cover these claims. We have established reserves for issues that are probable and estimable in amounts management believes are adequate to cover reasonable adverse judgments not covered by insurance. Based upon the information available to management and discussions with legal counsel, it is the opinion of management that the ultimate outcome of the various legal actions and claims that are incidental to our business will not have a material adverse impact on the consolidated financial position, results of operations or cash flows; however, such matters are subject to many uncertainties and the outcomes of individual matters are not predictable with assurance.

 

12.

Stockholders’ Equity (Deficit)

Common Stock — Our authorized capital stock consists of 60,000,000 shares of common stock with a par value of $0.01 per share.

Preferred Stock — Our authorized capital stock consists of 5,000,000 shares of preferred stock with a par value of $0.01 per share, with no shares outstanding as of December 31, 2013.

Earnings Per Share — Basic earnings per share is determined by dividing net income by the weighted average number of common shares outstanding during the year. Diluted earnings per share, and all other diluted per share amounts presented, is determined by dividing net income by the weighted average number of common shares and potential common shares outstanding during the period as determined by the Treasury Stock Method. Potential common shares are included in the diluted earnings per share calculation when dilutive. Diluted

 

79


Table of Contents

earnings per share for years ended December 31, 2013, 2012 and 2011 includes the effects of potential common shares consisting of common stock issuable upon exercise of outstanding stock options when dilutive (in thousands, except per share amounts):

 

    2013     2012     2011  

Net income (loss) attributable to common stockholders — basic and diluted

  $ (12,445   $ 50,077      $ 18,605   
 

 

 

   

 

 

   

 

 

 

Weighted average number of common shares outstanding

    28,584        28,230        27,848   

Dilutive effect of outstanding stock options and restricted stock grants after application of the treasury stock method

           198        342   
 

 

 

   

 

 

   

 

 

 

Dilutive shares outstanding

    28,584        28,428        28,190   
 

 

 

   

 

 

   

 

 

 

Basic earnings (loss) per share attributable to common stockholders

  $ (0.44   $ 1.77      $ 0.67   
 

 

 

   

 

 

   

 

 

 

Diluted earnings (loss) per share attributable to common stockholders

  $ (0.44   $ 1.76      $ 0.66   
 

 

 

   

 

 

   

 

 

 

As of December 31, 2013, diluted earnings per share excludes approximately 855 thousand shares of nonvested restricted stock and 206 thousand shares of outstanding stock options as the effect would have been anti-dilutive. As of December 31, 2012, diluted earnings per share excludes approximately 467 thousand shares of nonvested restricted stock and 470 thousand shares of outstanding stock options as the effect would have been anti-dilutive. As of December 31, 2011, diluted earnings per share excludes approximately 291 thousand shares of nonvested restricted stock and 470 thousand shares of outstanding stock options as the effect would have been anti-dilutive.

Dividends — We have not declared or paid any cash dividends in the past. The terms of the Loan and Security Agreement and the 7.875% Notes Indenture restricts the payment or distribution of our cash or other assets, including cash dividend payments.

 

13.

Performance Awards

Awards, defined as cash, shares or other awards, may be granted to employees under the Fourth Amended and Restated Equity Incentive Plan. The Award is earned and payable based upon the Company’s relative “Total Shareholder Return” in terms of ranking as compared to the “Peer Group” over a three-year period (the “Performance Period”). Total Shareholder Return is determined by the percentage change in value (positive or negative) over the applicable measurement period as measured by dividing (A) the sum of (I) the cumulative value of dividends and other distributions paid on the Common Stock (or the publicly traded common stock of the applicable Peer Group company) for the applicable measurement period, and (II) the difference (positive or negative) between each such company’s “Starting Stock Price” and “Ending Stock Price,” by (B) the Starting Stock Price. The award is to be paid out at the end of the Performance Period in cash if the employee is employed through the end of the Performance Period. If the employee is not present during the entire Performance Period, the award will be forfeited. These grants were accounted for as cash settlement awards for which the fair value of the award fluctuates based on the change in Total Shareholder Return in relation to the “Peer Group”. Performance awards were granted in November 2013 and 2012 under the Fourth Amended and Restated Equity Incentive Plan. The awards granted in 2013 totaled $1.4 million and specify that payments will be made in cash. Awards granted in 2012 totaled $0.7 million, net of forfeitures of $1.2 million and specify that payments will be made in cash. These 2012 awards will vest in November 2015 and the 2013 awards will vest in 2016. Compensation expense was recognized totaling $0.2 million for the years ended December 31, 2013 and 2012. The expense to be recorded in future periods totals $1.7 million for the unvested portion of the awards.

 

80


Table of Contents
14.

Share-Based Compensation

We estimate our pre-tax share-based compensation expense to be approximately $3.6 million in 2014 based on our current share-based compensation arrangements. The pre-tax share-based compensation expense that has been charged against income for the share-based compensation arrangements was approximately $5.3 million, $4.7 million and $3.6 million for the years ended December 31, 2013, 2012 and 2011, respectively.

Stock Option Grants — In October 2004, we granted options to purchase 598,950 shares of common stock at $15.84 per share. These options have a ten-year term and vest ratably in three equal annual installments commencing on October 20, 2005. As of December 31, 2008, there was no amount remaining of unearned compensation related to nonvested stock options granted in October 2004 under the amended and restated equity incentive plan.

Restricted Stock Awards — Restricted stock is a grant of shares of common stock that may not be sold, encumbered or disposed of, and that may be forfeited in the event of certain terminations of employment, prior to the end of a restricted period set by the compensation committee of the board of directors. A participant granted restricted stock generally has all of the rights of a stockholder, unless the compensation committee determines otherwise. The following table summarizes information about restricted stock grants (in millions, except for share data):

 

Grant

  Shares    

Vesting Schedule

  Unearned
Compensation
    Remaining
Period (in
months)
 

November 2011

    443,250     

3 equal annual installments commencing on October 20, 2012

  $ 1.2        10   

November 2012

    494,151     

3 equal annual installments commencing on October 20, 2013

  $ 2.0        22   

August 2013

    100,000     

3 equal annual installments commencing on October 20, 2014

  $ 0.7        34   

November 2013

    470,997     

3 equal annual installments commencing on October 20, 2014

  $ 2.9        34   

As of December 31, 2013, there was approximately $6.8 million of unearned compensation expense related to non-vested share-based compensation arrangements granted under our equity incentive plans. This expense is subject to future adjustments for vesting and forfeitures and will be recognized on a straight-line basis over the remaining period listed above for each grant.

We currently estimate the forfeiture rate for November 2013, November 2012 and November 2011 restricted stock awards at 8.2%, 8.2% and 8.2%, respectively, for all participants of each plan. A summary of the status of our stock options as of December 31, 2013 and changes during the twelve-month period ending December 31, 2013 is presented below:

 

Stock Options

   Options
(000’s)
    Weighted-
Average
Exercise
Price
     Weighted-
Average
Remaining
Contractual
Life (Years)
     Aggregate
Intrinsic
Value (000’s)
 

Outstanding at December 31, 2012

     476      $ 15.69         1.9       $ 14   

Exercised

     (7     5.54         

Forfeited

     (263     15.84         
  

 

 

   

 

 

    

 

 

    

 

 

 

Outstanding at December 31, 2013

     206      $ 15.84         0.9       $   
  

 

 

   

 

 

    

 

 

    

 

 

 

Exercisable at December 31, 2013

     206      $ 15.84         0.9       $   
  

 

 

   

 

 

    

 

 

    

 

 

 

Nonvested, expected to vest at December 31, 2013

          $               $   
  

 

 

   

 

 

    

 

 

    

 

 

 

 

81


Table of Contents

The following table summarizes information about our nonvested restricted stock grants as of December 31, 2013:

 

     Nonvested Restricted Stock  
     Shares
(000’s)
    Weighted-
Average
Grant-Date
Fair Value
 

Nonvested at December 31, 2012

     908      $ 10.10   

Granted

     571        6.96   

Vested

     (489     11.05   

Forfeited

     (135     9.30   
  

 

 

   

 

 

 

Nonvested at December 31, 2013

     855      $ 7.59   
  

 

 

   

 

 

 

The weighted-average grant-date fair value for the years ended December 31, 2013, 2012 and 2011 was $6.96, $7.85 and $11.49, respectively. We expect employees to surrender approximately 161 thousand shares of our common stock in connection with the vesting of restricted stock during 2014 to satisfy income tax withholding obligations.

As of December 31, 2013, a total of 625,052 shares were available from the 4.6 million shares authorized for award under our Fourth Amended and Restated Equity Incentive Plan, including cumulative forfeitures.

Repurchase of Common Stock — We did not repurchase any of our common stock on the open market as part of a stock repurchase program during 2013; however, our employees surrendered 99 thousand shares of our common stock to satisfy tax withholding obligations on the vesting of restricted stock awards issued under our Fourth Amended and Restated Equity Incentive Plan.

 

15.

Defined Contribution Plans, Pension and Other Post-Retirement Benefit Plans

Defined Contribution Plans — We sponsor various 401(k) employee savings plans covering all eligible employees, as defined. Eligible employees can contribute on a pre-tax basis to the plan. In accordance with the terms of the 401(k) plans, we elect to match a certain percentage of the participants’ contributions to the plans, as defined. We recognized expense associated with these plans of approximately $2.2 million, $2.2 million and $1.0 million in 2013, 2012 and 2011, respectively.

Pension and Other Post-Retirement Benefit Plans — We sponsor pension and other post-retirement benefit plans that cover certain hourly and salaried employees in the U.S. and United Kingdom. Our policy is to make annual contributions to the plans to fund the minimum contributions as required by local regulations.

 

82


Table of Contents

The change in benefit obligation, plan assets and funded status as of December 31 consisted of the following (in thousands):

 

     U.S. Pension Plans     Non-U.S. Pension Plans     Other
Post-retirement
Benefit Plans
 
     2013     2012     2013     2012     2013     2012  

Change in benefit obligation:

            

Benefit obligation — Beginning of year

   $ 47,096      $ 44,003      $ 41,768      $ 37,060      $ 918      $ 1,302   

Service cost

     108        112                               

Interest cost

     1,704        1,802        1,761        1,863        29        48   

Participant contributions

                                 19        38   

Benefits paid

     (1,875     (1,716     (1,601     (1,453     (107     (112

Actuarial loss (gain)

     (5,004     2,895        493        2,605        (173     (358

Exchange rate changes

                   850        1,693                 
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Benefit obligation at end of year

     42,029        47,096        43,271        41,768        686        918   

Change in plan assets:

            

Fair value of plan assets — Beginning of year

     29,395        25,823        31,939        28,241                 

Actual return on plan assets

     3,935        3,565        3,128        2,935                 

Employer contributions

     2,087        1,723        928        926        88        75   

Participant contributions

                                 19        38   

Benefits paid

     (1,875     (1,716     (1,601     (1,453     (107     (112

Exchange rate changes

                   650        1,290               (1
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Fair value of plan assets at end of year

     33,542        29,395        35,044        31,939                 
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Funded status

   $ (8,487   $ (17,701   $ (8,227   $ (9,829   $ (686   $ (918
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Amounts recognized in the consolidated balance sheets at December 31 consist of (in thousands):

 

     U.S. Pension Plans      Non-U.S. Pension Plans      Other
Post-Retirement
Benefit Plans
 
       2013            2012              2013              2012            2013          2012    

Current liabilities

   $       $       $       $       $ 151       $ 175   

Noncurrent liabilities

     8,487         17,701         8,227         9,829         535         743   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Net amount recognized

   $ 8,487       $ 17,701       $ 8,227       $ 9,829       $ 686       $ 918   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

The components of net periodic benefit cost for the years ended December 31 are as follows (in thousands):

 

    U.S. Pension Plans     Non-U.S. Pension Plans     Other
Post-retirement
Benefit Plans
 
    2013     2012     2011     2013     2012     2011     2013     2012     2011  

Service cost

  $ 108      $ 112      $ 73      $      $      $      $      $      $   

Interest cost

    1,704        1,802        1,956        1,761        1,863        2,127        29        48        65   

Expected return on plan assets

    (2,202     (1,955     (1,915     (1,878     (1,697     (1,797                     

Amortization of prior service credit

                                              (122     (128     (128

Recognized actuarial loss (gain)

    421        371        104        302        260        287        (157     (89     (136
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net periodic benefit cost

  $ 31      $ 330      $ 218      $ 185      $ 426      $ 617      $ (250   $ (169   $ (199
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

83


Table of Contents

Amounts Recognized in Accumulated Other Comprehensive Income (Loss) — Amounts recognized in accumulated other comprehensive income (loss) at December 31 are as follows (in thousands):

 

    U.S. Pension Plans     Non-U.S. Pension Plans     Other
Post-retirement
Benefit Plans
 
    2013     2012     2011     2013     2012     2011     2013     2012     2011  

Net actuarial loss (gain)

  $ 8,014      $ 15,172      $ 14,256      $ 10,130      $ 10,965      $ 9,428      $ (682   $ (663   $ (381

Prior service credit

                                              81        (41     (170
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 
  $ 8,014      $ 15,172      $ 14,256      $ 10,130      $ 10,965      $ 9,428      $ (601   $ (704   $ (551
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Other Changes in Plan Assets and Benefit Obligations Recognized in Other Comprehensive Income (Loss) — Amounts recognized as other changes in plan assets and benefit obligations in other comprehensive income at December 31 are as follows (in thousands):

 

     U.S. Pension Plans     Non-U.S. Pension Plans     Other
Post-retirement
Benefit Plans
 
     2013     2012     2013     2012     2013     2012  

Actuarial loss (gain)

   $ (6,737   $ 1,286      $ (757   $ 1,367      $ (173   $ (358

Amortization of actuarial (gain) loss

     (421     (371     (302     (260     158        90   

Prior service credit

                                 122        128   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total recognized in other comprehensive income (loss)

   $ (7,158   $ 915      $ (1,059   $ 1,107      $ 107      $ (140
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

The estimated actuarial loss for the defined benefit pension plans that will be amortized from accumulated other comprehensive income into net periodic benefit cost over the next fiscal year is $0.2 million. The estimated actuarial gain for the other post-retirement benefit plans that will be amortized from accumulated other comprehensive income into net periodic benefit cost over the next fiscal year is $0.2 million.

Weighted-average assumptions used to determine benefit obligations at December 31 are as follows:

 

     U.S. Pension Plans     Non-U.S. Pension Plans     Other
Post-retirement
Benefit Plans
 
     2013     2012     2013     2012     2013     2012  

Discount rate

     4.57     3.67     4.40     4.20     4.57     3.67

Weighted-average assumptions used to determine net periodic benefit cost at December 31 are as follows:

 

     U.S. Pension Plans     Non-U.S. Pension Plans     Other
Post-retirement
Benefit Plans
 
     2013     2012     2011     2013     2012     2011     2013     2012     2011  

Discount rate

     3.67     4.19     5.31     4.20     4.90     5.70     3.67     4.19     5.31

Expected return on plan assets

     7.50     7.50     7.50     5.80     5.80     6.50     N/A        N/A        N/A   

The rate of return assumptions are based on projected long-term market returns for the various asset classes in which the plans are invested, weighted by the target asset allocations. An incremental amount for active plan asset management and diversification, where appropriate, is included in the rate of return assumption. Our pension plan investment strategy is reviewed annually.

We employ a total return investment approach whereby a mix of equities and fixed income investments are used to maximize the long-term return of Plan assets for a prudent level of risk. The intent of this strategy is to

 

84


Table of Contents

minimize plan expenses by outperforming plan liabilities over the long run. Risk tolerance is established through careful consideration of plan liabilities, plan funded status and corporate financial condition. The investment portfolio contains a diversified blend of equity, balanced, fixed income and real estate investments. Furthermore, equity investments are diversified across U.S. and non-U.S. stocks, as well as growth, value and small and large capitalizations. Other assets such as real estate are used judiciously to enhance long-term returns while improving portfolio diversification. Derivatives may be used to gain market exposure in an efficient and timely manner; however, derivatives may not be used to leverage the portfolio beyond the market value of the underlying investments. Investment risk is measured and monitored on an ongoing basis through annual liability measurements, periodic asset/liability studies and quarterly investment portfolio reviews. We expect to contribute $2.7 million to our pension plans and our other post-retirement benefit plans in 2014.

Our current investment allocation target for our pension plans for 2014 and our weighted-average asset allocations of our pension assets for the years ended December 31, by asset category, are as follows:

 

     Target Allocation     Pension Plans  
     U.S.     Non-U.S.     2013     2012  

Cash and cash equivalents

                

Equity securities

     55        51        58        51   

Debt securities

     25        39        28        35   

Real estate

     20        10        14        14   
  

 

 

   

 

 

   

 

 

   

 

 

 
     100     100     100     100

The following descriptions relate to our plan assets:

Cash and cash equivalents—The fair value of cash and cash equivalents is valued at cost.

Equity Securities—The overall equity category includes common stocks issued by U.S., United Kingdom and other international companies, equity funds that invest in common stocks and unit linked insurance policies. All investments generally allow near-term (within 90 days of the measurement date) liquidity and are held in issues that are actively traded to facilitate transactions at minimum cost.

Balanced —The overall balanced category includes funds primarily invested in a mix of equity and fixed income securities where the allocations are at the discretion of the investment manager. All investments generally allow near-term (within 90 days of the measurement date) liquidity and are held in issues that are actively traded to facilitate transactions at minimum cost.

Fixed Income Security—The overall fixed income category includes U.S. dollar-denominated and United Kingdom and other international marketable bonds and convertible debt securities as well as fixed income funds that invest in these instruments. All assets generally allow near-term liquidity and are held in issues, which are actively traded to facilitate transactions as minimum cost.

The fair value of fixed income securities is determined by either direct or indirect quoted market prices. When the value of assets held in separate accounts is not published, the value is based on the underlying holdings, which are primarily direct quoted market prices on regulated financial exchanges.

Real Estate—Real estate provides an indirect investment into a diversified and multi-sector portfolio of property assets. The fair value of real estate investments is valued by the fund managers. The fund managers value the real estate investments via independent third-party appraisals on a periodic basis. Assumptions used to revalue the properties are updated every quarter.

 

85


Table of Contents

The fair values of our pension plan assets by asset category and by level as described in Note 2 for the years ended December 31, 2013 and 2012 are as follows (in thousands):

 

     December 31, 2013  
            Quoted Prices in
Active  Markets for
Identical Assets
     Significant
Observable Inputs
     Significant
Unobservable Inputs
 
     Total      Level 1      Level 2      Level 3  

Cash and cash equivalents

   $ 243       $ 243         

Equities:

           

U.S. large value

     3,801         3,801         

U.S. large growth

     3,731         3,731         

International large value

     986            986      

International blend

     5,629            5,629      

International growth

     2,866         2,866         

Emerging markets

     2,516         2,516         

Balanced

     20,666            20,666      

Corporate bonds

     18,984            18,984      

Real Estate:

           

U.S. property

     6,767               6,767   

U.K. property

     2,843               2,843   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total pension fund assets

   $ 69,032       $ 13,157       $ 46,265       $ 9,610   
  

 

 

    

 

 

    

 

 

    

 

 

 

 

     December 31, 2012  
            Quoted Prices in
Active Markets for
Identical Assets
     Significant
Observable Inputs
     Significant
Unobservable Inputs
 
     Total      Level 1      Level 2      Level 3  

Cash and cash equivalents

   $ 26       $ 26       $       $   

Equities:

           

U.S. large value

     3,210         3,210                   

U.S. large growth

     3,020         3,020                   

U.S. small cap growth

                               

U.K. index

     6,507                 6,507           

International large value

     9,151                 9,151           

International blend

     4,669                 4,669           

International growth

     2,498         2,498                   

Emerging markets

     2,353         2,353                   

Balanced

     2,801                 2,801           

Fixed income securities:

           

Government bonds

     4,063                 4,063           

Corporate bonds

     14,693                 14,693           

Real Estate:

           

U.S. property

     5,968                         5,968   

U.K. property

     2,375                         2,375   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total pension fund assets

   $ 61,334       $ 11,107       $ 41,884       $ 8,343   
  

 

 

    

 

 

    

 

 

    

 

 

 

 

86


Table of Contents

The fair value of our pension plan assets measured using significant unobservable inputs (Level 3) at December 31 are as follows (in thousands):

 

     2013      2012  

Beginning balance

   $ 8,343       $ 6,210   

Actual return on plan assets:

     

Relating to assets held at reporting date

     980         683   

Relating to assets sold during the period

     17         0   

Purchases, sales and settlements, net

     217         1,350   

Foreign currency translation adjustment

     53         100   
  

 

 

    

 

 

 

Ending balance

   $ 9,610       $ 8,343   
  

 

 

    

 

 

 

For measurement purposes, a 7.0% annual rate of increase in the per capita cost of covered health care benefits was assumed for 2013. The rate was assumed to decrease gradually to 5% through 2017 and remain constant thereafter. Assumed health care cost trend rates can have a significant effect on the amounts reported for other post-retirement benefit plans.

Differences in the ultimate health care cost trend rates within the range indicated below would have had the following impact on 2013 other post-retirement benefit results (in thousands):

 

     1 Percentage
Point Increase
     1 Percentage
Point Decrease
 

Increase (Decrease) from change in health care cost trend rates

     

Other post-retirement benefit expense

   $ 5       $ (5

Other post-retirement benefit liability

   $ 17       $ (16

The following table summarizes our expected future benefit payments of our pension and other post-retirement benefit plans (in thousands):

 

Year

   Pension Plans      Other Post-
retirement
Benefit Plans
 

2014

   $ 3,678       $ 151   

2015

   $ 3,783       $ 103   

2016

   $ 4,064       $ 92   

2017

   $ 4,312       $ 91   

2018

   $ 4,328       $ 79   

2019 to 2023

   $ 26,439       $ 170   

 

87


Table of Contents
16.

Comprehensive Income (Loss)

The accumulated balances for each classification of other comprehensive income are as follows:

 

     Foreign
currency items
    Pension and
postretirement
benefit plans
    Accumulated other
comprehensive
income
 

Beginning balance, January 1, 2012

   $ (9,261   $ (18,557   $ (27,818

Net current period change

     1,692        (2,116     (424

Reclassification adjustments for gains (losses) reclassified into income

            357        357   
  

 

 

   

 

 

   

 

 

 

Ending balance, December 31, 2012

   $ (7,569   $ (20,316   $ (27,885
  

 

 

   

 

 

   

 

 

 

Net current period change

     (4,338     6,306        1,968   

Reclassification adjustments for gains (losses) reclassified into income

            (391     (391
  

 

 

   

 

 

   

 

 

 

Ending balance, December 31, 2013

   $ (11,907   $ (14,401   $ (26,308
  

 

 

   

 

 

   

 

 

 

The related tax effects allocated to each component of other comprehensive income (loss) for the years ended December 31, 2013 and 2012 are as follows (in thousands):

 

2013    Before Tax
Amount
    Tax (Expense)
Benefit
    After Tax Amount  

Retirement benefits adjustment:

      

Net actuarial gain (loss) and prior service credit

   $ 8,850      $ (2,549   $ 6,301   

Reclassification of actuarial loss and prior service cost to net income

     (443     52        (391
  

 

 

   

 

 

   

 

 

 

Net unrealized loss

     8,407        (2,497     5,910   
  

 

 

   

 

 

   

 

 

 

Cumulative translation adjustment

     (4,318     (20     (4,338
  

 

 

   

 

 

   

 

 

 

Total other comprehensive income (loss)

   $ 4,089      $ (2,517   $ 1,572   
  

 

 

   

 

 

   

 

 

 
2012    Before Tax
Amount
    Tax (Expense)
Benefit
    After Tax Amount  

Retirement benefits adjustment:

      

Net actuarial gain (loss) and prior service credit

   $ (2,455   $ 339      $ (2,116

Reclassification of actuarial loss and prior service cost to net income

     413        (56     357   
  

 

 

   

 

 

   

 

 

 

Net unrealized loss

     (2,042     283        (1,759
  

 

 

   

 

 

   

 

 

 

Cumulative translation adjustment

     1,830        (138     1,692   
  

 

 

   

 

 

   

 

 

 

Total other comprehensive income (loss)

   $ (212   $ 145      $ (67
  

 

 

   

 

 

   

 

 

 

 

88


Table of Contents
17.

Quarterly Financial Data (Unaudited)

The following is a condensed summary of actual quarterly results of operations for 2013 and 2012 (in thousands, except per share amounts):

 

    Revenues     Gross Profit     Operating
Income (Loss)
    Net Income
(Loss)
    Net Income
(Loss)
Attributable
to Common
Stockholders
    Basic
Earnings  (Loss)
Per Share
    Diluted
Earnings (Loss)
Per Share
Attributable to
Common
Stockholders1
 

2013:

             

First

  $ 177,822      $ 18,081      $ (273   $ (4,616   $ (4,614   $ (0.16   $ (0.16

Second

  $ 198,909      $ 28,877      $ 2,130      $ (1,663   $ (1,662   $ (0.06   $ (0.06

Third

  $ 187,942      $ 18,091      $ (3,428   $ (7,267   $ (7,267   $ (0.25   $ (0.25

Fourth

  $ 183,045      $ 20,681      $ 8,009      $ 1,096      $ 1,100      $ 0.04      $ 0.04   

2012:

             

First

  $ 236,990      $ 36,778      $ 18,503      $ 11,992      $ 12,005      $ 0.43      $ 0.42   

Second

  $ 242,745      $ 37,456      $ 19,003      $ 13,153      $ 13,155      $ 0.47      $ 0.46   

Third

  $ 204,824      $ 26,405      $ 8,869      $ 30,473      $ 30,501      $ 1.08      $ 1.07   

Fourth

  $ 173,357      $ 15,899      $ (2,279   $ (5,588   $ (5,584   $ (0.20   $ (0.20

 

  (1)

See Note 13 for discussion on the computation of diluted shares outstanding.

The sum of the per share amounts for the quarters does not equal the total for the year due to the application of the treasury stock methods.

 

89


Table of Contents
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

There were no disagreements with our current or former independent accountants on matters of accounting and financial disclosures or reportable events.

 

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to provide reasonable assurance that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our President and Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. Management necessarily applied its judgment in assessing the costs and benefits of such controls and procedures, which, by their nature, can provide only reasonable assurance regarding management’s disclosure control objectives.

Based upon the disclosure controls evaluation and because of the identification of a material weakness in our internal control over financial reporting as further discussed below under “Management’s Report on Internal Control over Financial Reporting,” our CEO and CFO have concluded that as of December 31, 2013, our disclosure controls and procedures were not effective to provide reasonable assurance that the internal control objectives over financial reporting are achieved.

In light of the foregoing conclusion, we undertook additional procedures in order that management could conclude that reasonable assurance exists regarding the reliability of financial reporting and the preparation of the consolidated financial statements contained in this filing. Accordingly, management believes that our condensed consolidated financial statements included in this Annual Report on Form 10-K for the fiscal year ended December 31, 2013 fairly present, in all material respects, our financial position, results of operations and cash flows for the periods presented.

Changes in Internal Control Over Financial Reporting

The identification of the material weakness described above is deemed to be a change in our internal control over financial reporting during the quarter ended December 31, 2013.

There were no additional changes in the company’s internal control over financial reporting during the quarter ended December 31, 2013 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

90


Table of Contents

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rules 13a-15(f) and 15d-15(f) promulgated under the Exchange Act as a process designed by, or under the supervision of, our principal executive and principal financial officers and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the U.S. Such internal control includes those policies and procedures that:

 

   

Pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets;

 

   

Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors; and

 

   

Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

A material weakness is a deficiency or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis.

Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2013. In making this assessment, it used the criteria set forth in Internal Control — Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this assessment, management has identified a material weakness in system access controls resulting in inadequate segregation of duties. Specifically, management failed to effectively operate controls designed to:

 

  (1)

timely remove terminated users’ system access; and

 

  (2)

timely prepare and review system access reports for inappropriate user access.

Additionally, management failed to design a process to review system access by users that transferred between departments.

As a result of this material weakness, a material misstatement of the Company’s annual or interim financial statements could occur and not be prevented or detected on a timely basis. Therefore, management has determined that, as of December 31, 2013, our internal control over financial reporting was not effective.

Our independent registered public accounting firm, KPMG LLP, who audited our consolidated financial statements, has also audited the effectiveness of our internal control over financial reporting, which report appears in this Annual Report on Form 10-K.

Remediation Plan

We are in the process of developing and implementing our remediation plans to address the material weakness in system access controls resulting in inadequate segregation of duties. We intend to take the following actions to remediate the material weakness described herein:

 

  (1)

Review and revise our policies and procedures to enhance oversight of our system access controls, and improve communication between departments in order to:

 

  a.

timely remove system access for terminated employees;

 

  b.

timely prepare and review system access reports for inappropriate user access; and

 

  c.

timely review system access by users that transfer between departments.

 

  (2)

Clearly communicate a strong tone by the Company’s management setting a commitment to fully implement and administer the remediation steps listed above with accountability. Management may determine to take additional measures or determine to modify the remediation plan described above.

 

91


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Stockholders

Commercial Vehicle Group, Inc.:

We have audited Commercial Vehicle Group, Inc.’s internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control — Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Commercial Vehicle Group, Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. A material weakness related to system access controls resulting in inadequate segregation of duties has been identified and included in management’s assessment.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Commercial Vehicle Group, Inc. as of December 31, 2013 and 2012, and the related consolidated statements of income (loss), comprehensive income (loss), stockholders’ equity (deficit), and cash flows for the years then ended. This material weakness was considered in determining the nature, timing, and extent of audit tests applied in our audit of the 2013 consolidated financial statements, and this report does not affect our report dated March 17, 2014, which expressed an unqualified opinion on those consolidated financial statements.

In our opinion, because of the effect of the aforementioned material weakness on the achievement of the objectives of the control criteria, Commercial Vehicle Group, Inc. has not maintained effective internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control — Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

(signed) KPMG LLP

Columbus, Ohio

March 17, 2014

 

92


Table of Contents
Item 9B. Other Information

None.

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

 

A.

Directors of the Registrant

The following table sets forth certain information with respect to our current directors as of March 11, 2014:

 

Name

  

Age

    

Principal Position(s)

Richard A. Snell

     72      

Chairman and Director

Richard P. Lavin

     61      

President and Chief Executive Officer and Director

Scott C. Arves

     57      

Director

David R. Bovee

     64      

Director

Robert C. Griffin

     66      

Director

S.A. Johnson

     73      

Director

The following biographies describe the business experience of our directors:

Scott C. Arves has served as a Director since July 2005. Since January 2007, Mr. Arves has served as President and Chief Executive Officer of Transport America, a truckload, intermodal and logistics provider. Prior to joining Transport America, Mr. Arves was President of Transportation for Schneider National, Inc., a provider of transportation, logistics and related services, from May 2000 to July 2006. Mr. Arves brings nearly 33 years of transportation experience to his role as Director, including 19 years of P & L experience and 16 years as a Division President or Chief Executive Officer.

 

93


Table of Contents

David R. Bovee has served as a Director since October 2004. Mr. Bovee served as Vice President and Chief Financial Officer of Dura Automotive Systems, Inc. (“Dura”) from January 2001 to March 2005 and from November 1990 to May 1997. In October 2006, subsequent to Mr. Bovee’s 2005 retirement, Dura filed a voluntary petition for reorganization under the federal bankruptcy laws. From May 1997 until January 2001, Mr. Bovee served as Vice President of Business Development for Dura. Mr. Bovee also served as Assistant Secretary for Dura. Prior to joining Dura, Mr. Bovee served as Vice President at Wickes in its Automotive Group from 1987 to 1990. Mr. Bovee’s relevant experience includes more than 10 years as a Chief Financial Officer and 15 years as an executive officer of a major automotive supplier, and nearly 10 years of experience in a publicly traded company. Mr. Bovee’s career spans 32 years in the manufacturing and transportation sectors, servicing a footprint similar to CVG. Mr. Bovee has spent his entire career in finance roles, which suits him well to his position on the Audit Committee.

Robert C. Griffin has served as a Director since July 2005. His career has spanned over 25 years in the financial sector, including Director and Audit Committee Chair of JGWPT Holdings, Inc., Head of Investment Banking Americas and Management Committee Member for Barclay’s Capital from 2000 to 2002. Prior to that, Mr. Griffin served as the Global Head of Financial Sponsor Coverage for Bank of America Securities and a member of its Montgomery Securities Subsidiary Management Committee from 1998 to 2000 and as Group Executive Vice President of Bank of America and a member of its Senior Management Committee from 1997 to 1998. Mr. Griffin served as a Director of Sunair Services Corporation from February 2008 until its sale in December 2009 as a member of their Audit Committee and Chairman of their Special Committee. Mr. Griffin currently serves as a Director of GSE Holdings, Inc., where he serves as Chairman and a member of the Compensation Committee and the Nominating and Corporate Governance Committee, and as a Director of Builders FirstSource, Inc., where he is Chairman of the Audit Committee, a member of the Nominating Committee and was Chairman of their Special Committee in 2009. Mr. Griffin brings strong financial and management expertise to our Board through his experience as an officer and director of a public company, service on other boards and his senior leadership tenure within the financial industry.

S.A. (“Tony”) Johnson has served as a Director since September 2000. Mr. Johnson served as the Chairman of Hidden Creek from May 2001 to May 2004 and from 1989 to May 2001 was its President and Chief Executive Officer. Prior to forming Hidden Creek, Mr. Johnson served from 1985 to 1989 as Chief Operating Officer of Pentair, Inc., a diversified industrial company. Prior to 2005, Mr. Johnson served as a Director of Saleen, Inc. and Dura Automotive. Mr. Johnson served as a Director of Tower Automotive from 1993 to 2007 and from 2004 to 2010 as a Director of Cooper-Standard Automotive, Inc. Mr. Johnson brings more than 30 years of executive experience to his role on the Board, including his current position as a Managing Partner of OG Partners, a private industrial management company where he has served since 2004.

Richard P. Lavin has served as director since August 2013 and as President and Chief Executive Officer since May 2013. Prior to joining us in May 2013, Mr. Lavin was the Group President of Construction Industries and Growth Markets at Caterpillar Inc. from December 2007 to December ... 2012. Mr. Lavin served as Vice President of Human Resources for Caterpillar Inc. from 2001 to 2004 and served as its Vice President of Operations for Asia Pacific Division from July 2004 to December 2007. From joining Caterpillar in 1984 to 2001, Mr. Lavin served in a number of key leadership roles, including Product Manager, Director of Corporate Human and Labor Relations, Director of Compensation and Benefits and Attorney. Mr. Lavin has been a Director for USG Corporation since November 2009 and ITT Corporation since May 2013. Mr. Lavin served as a Director of US-China Business Council, the U.S.-India Business Council and the U.S. Korea Business Council. Mr. Lavin also was a member of The Conference Board and the Chicago Council on Global Affairs. Mr. Lavin served on the International Advisory Council of Guanghua School of Management at Peking University and serves on the Board of Trustees at Bradley University.

Richard A. Snell has served as a Director since August 2004 and as Chairman since March 2010. He has served as Chairman and Chief Executive Officer of Qualitor, Inc. since May 2005 and as an Operating Partner at HCI Partners since 2003. Mr. Snell served as Chairman and Chief Executive Officer of Federal-Mogul

 

94


Table of Contents

Corporation, an automotive parts manufacturer, where he served from 1996 to 2000, and as Chief Executive Officer at Tenneco Automotive, also an automotive parts manufacturer, where he was employed from 1987 to 1996. Mr. Snell served as a Director of Schneider National, Inc., a multi-national trucking company, and as a member of their Compensation and Governance Committees from 1996 to 2011.

Resignation of a Director after fiscal year ended December 31, 2013

On February 5, 2014, Arnold B. Siemer, 76 years old, a director of the Board of Directors of the Company since November 2011, informed the Company that he is resigning from the Board of the Company effective immediately. Mr. Siemer’s resignation from the Board is not the result of any disagreement with the Company on any matter relating to the Company’s operations, policies or practices. Mr. Siemer was of the opinion that his other business endeavors were beginning to take time away from his ability to serve on the Board of the Company.

 

B.

Executive Officers

Information regarding our executive officers is set forth in Item 1 of Part I of this Annual Report on Form 10-K under the heading “Executive Officers of the Registrant.”

There are no family relationships between any of our directors or executive officers.

 

C.

Section 16(a) Beneficial Ownership Reporting Compliance and Corporate Governance

The information required by Item 10 with respect to compliance with reporting requirements is incorporated herein by reference to the sections labeled “Section 16(a) Beneficial Ownership Reporting Compliance” and “Proposal No. 1 — Election of Directors — Corporate Governance,” which appear in CVG’s 2014 Proxy Statement.

 

Item 11. Executive Compensation

The information required by Item 11 is incorporated herein by reference to the sections labeled “Executive Compensation — 2013 Director Compensation Table” and “Executive Compensation” and “Proposal No. 1 — Election of Directors — Corporate Governance,” which appear in CVG’s 2014 Proxy Statement including information under the heading “Compensation Discussion and Analysis.”

 

95


Table of Contents
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Options to purchase common shares of our common stock have been granted to certain of our executives and key employees under our fourth amended and restated equity incentive plan and our management stock option plan. The following table summarizes the number of stock options granted, net of forfeitures and exercises, and shares of restricted stock awarded and issued, net of forfeitures and shares on which restrictions have lapsed, the weighted-average exercise price of such stock options and the number of securities remaining to be issued under all outstanding equity compensation plans as of December 31, 2013:

 

    Number of Securities to be
Issued upon Exercise of
Outstanding Options,
Warrants and Rights
    Weighted-average
Exercise Price of
Outstanding
Options, Warrants

and Rights
    Number of
Securities
Remaining Available
for Future Issuance
Under Equity
Compensation Plans
 

Equity compensation plans approved by security holders:

     

Fourth Amended and Restated Equity Incentive Plan

    469,351 1    $ 15.84        625,052   

Management Stock Option Plan

    6,793      $ 5.54          

Equity compensation plans not approved by stockholders

         $          
 

 

 

   

 

 

   

 

 

 

Total

    476,144      $ 15.69        625,052   
 

 

 

   

 

 

   

 

 

 

 

(1)

Includes options granted under our Fourth Amended and Restated Equity Incentive Plan. Does not include 4,074,298 shares of restricted stock granted under our Fourth Amended and Restated Equity Incentive Plan, of which 855,240 shares had not vested as of December 31, 2013.

The information required by Item 12 is incorporated herein by reference to the section labeled “Security Ownership of Certain Beneficial Owners and Management,” which appears in CVG’s 2014 Proxy Statement.

 

Item 13. Certain Relationships, Related Transactions and Director Independence

The information required by Item 13 is incorporated herein by reference to the sections labeled “Certain Relationships and Related Transactions” and “Proposal No. 1 — Election of Directors — Corporate Governance,” which appear in CVG’s 2014 Proxy Statement.

 

Item 14. Principal Accountant Fees and Services

The information required by Item 14 is incorporated herein by reference to the section labeled “Proposal No. 3 — Ratification of Appointment of the Independent Registered Public Accounting Firm,” which appears in CVG’s 2014 Proxy Statement.

 

96


Table of Contents

PART IV

 

Item 15. Exhibits, Financial Statements Schedules

 

(1)

LIST OF FINANCIAL STATEMENT SCHEDULES

The following financial statement schedule of the Corporation and its subsidiaries is included herein:

Schedule II — Valuation and Qualifying Accounts and Reserves.

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES

SCHEDULE II: VALUATION AND QUALIFYING ACCOUNTS

December 31, 2013, 2012 and 2011

Accounts Receivable Allowances:

Transactions for the years ended December 31 were as follows (in thousands):

 

     2013     2012     2011  

Balance — Beginning of the year

   $ 3,393      $ 3,867      $ 2,717   

Provisions

     2,520        2,669        4,324   

Utilizations

     (3,803     (3,174     (4,585

Collection of bad debt

     196        0        0   

Acquisitions recorded

     0        0        1,459   

Currency translation adjustment

     (4     31        (48
  

 

 

   

 

 

   

 

 

 

Balance — End of the year

   $ 2,302      $ 3,393      $ 3,867   
  

 

 

   

 

 

   

 

 

 

Valuation Allowance:

Transactions for the years ended December 31 were as follows (in thousands):

 

     2013     2012     2011  

Balance — Beginning of the year

   $ 17,492      $ 69,364      $ 69,099   

Provisions

     2,640        2,828        1,185   

Utilizations

     (2,943     (54,700     (920
  

 

 

   

 

 

   

 

 

 

Balance — End of the year

   $ 17,189      $ 17,492      $ 69,364   
  

 

 

   

 

 

   

 

 

 

All other schedules for which provision is made in the applicable accounting regulations of the SEC are not required under the related instructions or are inapplicable and, therefore, have been omitted.

 

(2)

LIST OF EXHIBITS

The following exhibits are either included in this report or incorporated herein by reference as indicated below:

 

97


Table of Contents

EXHIBIT INDEX

 

Exhibit No.

 

Description

    2.1**  

Asset Purchase Agreement, dated as of January 28, 2011, by and among CVG Alabama LLC and Bostrom Seating, Inc., (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-34365), filed on March 15, 2011).

    3.1  

Amended and Restated Certificate of Incorporation of the Company (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).

    3.2  

Certificate of Amendment to the Amended and Restated Certificate of Incorporation of the Company, dated as of May 12, 2011 (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on May 13, 2011).

    3.3  

Amended and Restated By-laws of the Company (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).

    3.4  

Certificate of Designations of Series A Preferred Stock (included as Exhibit A to the Rights Agreement incorporated by reference to Exhibit 4.8) (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009.

    4.1  

Supplemental Indenture, dated as of April 21, 2011, by and among the Company, the subsidiary guarantors party thereto and U.S. Bank National Association (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 27, 2011).

    4.2  

Registration Rights Agreement, dated July 6, 2005, among the Company, the subsidiary guarantors party thereto and the purchasers named therein (incorporated herein by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on July 8, 2005).

    4.3  

Form of senior note (attached as exhibit to Exhibit 4.1) (incorporated herein by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on July 8, 2005).

    4.4  

Commercial Vehicle Group, Inc. Rights Agreement, dated as of May 21, 2009, by and between the Company and Computershare Trust Company, N.A. (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009).

    4.5  

Form of Rights Certificate (included as Exhibit B to the Rights Agreement) (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009).

    4.6  

Form of Summary of Rights to Purchase (included as Exhibit C to the Rights Agreement) (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009).

    4.7  

Commercial Vehicle Group, Inc. Amendment No. 1 to Rights Agreement, dated as of March 9, 2011, by and between the Company and Computershare Trust Company, N.A. (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on March 9, 2011).

    4.8  

Form of Certificate of Common Stock of the Company (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-115708)).

    4.9  

Indenture, dated as of April 26, 2011, by and among the Company, the subsidiary guarantors party thereto and U.S. Bank National Association, as trustee, with respect to 7.875% senior secured notes due 2019 (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 28, 2011).

    4.10  

Form of 7.875% Senior Secured Note due 2019 (included as Exhibit 1 to Exhibit 4.1) (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 28, 2011).

 

98


Table of Contents

Exhibit No.

  

Description

    4.10   

Registration Rights Agreement, dated as of April 26, 2011, by and among the Company, the guarantors party thereto and Credit Suisse Securities (USA) LLC (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 28, 2011).

    4.12   

Second Amended and Restated Loan and Security Agreement, dated as of November 15, 2013, by and among the Company, certain of the Company’s subsidiaries, as borrowers, and Bank of America, N.A. as agent and lender, (incorporated by reference to the Company’s current report on Form 8-K, filed on November 21, 2013).

    10.1   

Amended and Restated Loan and Security Agreement, dated as of April 26, 2011, by and among the Company and certain of its subsidiaries, as borrowers, and Bank of America, N.A., as agent and lender (incorporated by reference to the Company’s current report on Form 8-K
(File No. 001-34365), filed on April 28, 2011).

    10.2   

Intercreditor Agreement, dated as of April 26, 2011, by and among the Company, certain of its subsidiaries, Bank of America, N.A., as first lien administrative agent and first lien collateral agent for the First Priority Secured Parties, and U.S. Bank National Association, as trustee and second priority agent for the Second Priority Secured Parties (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 28, 2011).

    10.3*   

Commercial Vehicle Group, Inc. Fourth Amended and Restated Equity Incentive Plan (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on May 13, 2011).

    10.4*   

Bostrom Holding, Inc. Management Stock Option Plan (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).

    10.5*   

Form of Grant of Nonqualified Stock Option pursuant to the Bostrom Holding, Inc. Management Stock Option Plan (incorporated by reference to the Company’s registration statement on
Form S-1 (File No. 333-15708), filed on May 21, 2004).

    10.6*   

Form of Grant of Nonqualified Stock Option pursuant to the Commercial Vehicle Group, Inc. Third Amended and Restated Equity Incentive Plan (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 15, 2005).

    10.7   

Form of Non-Competition Agreement (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).

    10.8   

Registration Agreement, dated October 5, 2000, by and among Bostrom Holding, Inc. and the investors listed on Schedule A attached thereto (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).

    10.9   

Joinder to Registration Agreement, dated as of March 28, 2003, by and among Bostrom Holding, Inc. and J2R Partners VI, CVS Partners, LP and CVS Executive Investco LLC (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-15708), filed on May 21, 2004).

    10.10   

Joinder to the Registration Agreement, dated as of May 20, 2004, by and among Commercial Vehicle Group, Inc. and the prior stockholders of Trim Systems (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).

    10.11*   

Commercial Vehicle Group, Inc. 2012 Bonus Plan (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on March 9, 2012).

    10.12*   

Commercial Vehicle Group, Inc. 2013 Bonus Plan (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 001-34365), filed on May 3, 2013).

    10.13*   

Service Agreement, dated March 1, 1993, between Motor Panels (Coventry) Plc and William Gordon Boyd (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-125626), filed on June 8, 2005).

    10.14*   

Assignment and Assumption Agreement, dated as of June 1, 2004, between Mayflower Vehicle Systems PLC and Mayflower Vehicle Systems, Inc. (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-125626), filed on June 8, 2005).

 

99


Table of Contents

Exhibit No.

  

Description

  10.15*   

Form of Restricted Stock Agreement pursuant to the Commercial Vehicle Group, Inc. Third Amended and Restated Equity Incentive Plan (incorporated by reference to amendment no. 1 to the Company’s registration statement on Form S-4 (File No. 333-129368), filed on December 1, 2005).

  10.16*   

Form of Cash Performance Award pursuant to the Commercial Vehicle Group, Inc. Fourth Amended and Restated Equity Incentive Plan. Incorporated by reference to the Company’s Annual Report on Form 10-K (File No. 001-34365), filed on March 11, 2013.

  10.17*   

Change in Control & Non-Competition Agreement dated April 5, 2006 with Mervin Dunn (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on April 7, 2006).

  10.18*   

Change in Control & Non-Competition Agreement dated April 5, 2006 with Gerald L. Armstrong (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on April 7, 2006).

  10.19*   

Change in Control & Non-Competition Agreement dated April 5, 2006 with Chad M. Utrup (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on April 7, 2006).

  10.20*   

Change in Control & Non-Competition Agreement dated May 22, 2007 with Kevin R.L. Frailey (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 25, 2007).

  10.21*   

First Amendment to Change in Control & Non-Competition Agreement dated November 5, 2008 with Mervin Dunn (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 16, 2009).

  10.22*   

First Amendment to Change in Control & Non-Competition Agreement dated November 5, 2008 with Gerald L. Armstrong (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 16, 2009).

  10.23*   

First Amendment to Change in Control & Non-Competition Agreement dated November 5, 2008 with Chad M. Utrup (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 16, 2009).

  10.24*   

First Amendment to Change in Control & Non-Competition Agreement dated November 5, 2008 with Kevin R.L. Frailey (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 16, 2009).

  10.25*   

First Amendment to Change in Control & Non-Competition Agreement dated March 9, 2012 with William Gordon Boyd (incorporated by reference to the Company’s annual report on Form 10-K (File No. 001-34365), filed on March 13, 2012.

  10.26*   

Amended and Restated Deferred Compensation Plan dated November 5, 2008 (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 16, 2009).

  10.27   

Form of indemnification agreement with directors and executive officers (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 14, 2008).

  10.28*   

Terms and conditions of employment for executive officers (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 14, 2008).

 

100


Table of Contents

Exhibit No.

  

Description

10.29*   

Retirement Agreement dated April 3, 2013 with Mervin Dunn, (incorporated by reference to the Company’s current report on Form 8-K, filed on April 8, 2013).

10.30*   

Employment Agreement, dated as of August 14, 2013, between the Company and Richard P. Lavin (incorporated by reference to the company’s current report on form 8-K filed on August 20, 2013).

10.31*   

Separation Agreement, dated as of August 27, 2013, between the Company and Gerald L. Armstrong (incorporated by reference to the company’s current report on form 8-k filed on August 30, 2013).

10.32*   

Offer letter, dated September 27, 2013, to C. Timothy Trenary (incorporated by reference to the Company’s current report on Form 8-K, filed on September 30, 2013).

  12.1   

Computation of ratio of earnings to fixed charges.

  21.1   

Subsidiaries of Commercial Vehicle Group, Inc.

  23.1   

Consent of KPMG LLP.

  23.2   

Consent of Deloitte & Touche LLP.

  31.1   

302 Certification by Richard P. Lavin, President and Chief Executive Officer.

  31.2   

302 Certification by C. Timothy Trenary, Executive Vice President and Chief Financial Officer.

  32.1   

Certification by Richard P. Lavin pursuant to 18 U.S.C. Section 1350, as adopted pursuant to the Sarbanes-Oxley Act of 2002.

  32.2   

Certification by C. Timothy Trenary pursuant to 18 U.S.C. Section 1350, as adopted pursuant to the Sarbanes-Oxley Act of 2002.

101.INS   

XBRL Instance Document

101.SCH   

XBRL Schema Document

101.CAL   

XBRL Calculation Linkbase Document

101.LAB   

XBRL Label Linkbase Document

101.PRE   

XBRL Presentation Linkbase Document

101.DEF   

XBRL Definition Linkbase Document

 

*

Management contract or compensatory plan or arrangement required to be filed as an exhibit to this annual report on Form 10-K.

**

The schedules and exhibits to the Asset Purchase Agreement have been omitted from this filing pursuant to Item 601(b)(2) of Regulation S - K. The Company will furnish supplementally a copy of any such omitted schedules or exhibits to the SEC upon request.

All other items included in an Annual Report on Form 10-K are omitted because they are not applicable or the answers thereto are none.

 

101


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

COMMERCIAL VEHICLE GROUP, INC.

By:

 

/s/ Richard P. Lavin

 

Richard P. Lavin

 

President and Chief Executive Officer

Date: March 17, 2014

Pursuant to the requirements of the Securities Act of 1934, the registrant has duly caused this report to be signed below by the following persons on behalf of the registrant and in the capacities indicated on March 17, 2014.

 

Signature

  

Title

    

/s/ Richard A. Snell

Richard A. Snell

  

Chairman and Director

 

/s/ Richard P. Lavin

Richard P. Lavin

  

President, Chief Executive Officer
(Principal Executive Officer) and Director

 

/s/ Scott C. Arves

Scott C. Arves

  

Director

 

/s/ David R. Bovee

David R. Bovee

  

Director

 

/s/ Robert C. Griffin

Robert C. Griffin

  

Director

 

/s/ S.A. Johnson

S.A. Johnson

  

Director

 

/s/ C. Timothy Trenary

C. Timothy Trenary

  

Chief Financial Officer (Principal

Financial and Accounting Officer)

 

 

102